Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FILTER ELEMENT, INTA

Active
SPE7L3-26-T-214BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 38 intake filter elements, identified as NSN 2940016249315 and Deutz Corporation part number P537877. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania by February 17, 2027. The delivery terms are FOB Origin, with both inspection and acceptance occurring at the destination. The supplier must adhere to specific technical and quality requirements, including DLA packaging requirements RP001 and ASTM D3951, with marking and labeling performed according to MIL-STD-129. The contract specifies a strict quantity variance of plus or minus 0 percent. All procurement activities are managed by the Department of Defense Land Supplier Operations Vehicle Support agency under solicitation number SPE7L3-26-T-214B.

General Info

Procure 38 intake filter elements for DLA New Cumberland by February 17, 2027.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-214B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
Karen McCarley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILTER ELEMENT,INTA
FILTER ELEMENT,INTA
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
DEUTZ CORPORATION 62445 P/N P537877
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017697712 0001 EA 38.000
NSN/MATERIAL:2940016249315
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129.
SPE7L3-26-T-214B
SECTION B
PR: 7017697712 PRLI: 0001 CONT’D
The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/17/2027 Original Required Delivery Date:02/17/2027
SPE7L3-26-T-214B NSN/Part Number: 2940-01-624-9315 Quantity: 38 EA Purchase Request: 7017697712QTY: 38 Delivery: 161 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
CAP VALVE CYLINDER
Solicitation # SPE7MC-26-T-238R
This contract is for the procurement of two valve cylinder caps, identified by NSN 4820011084271 and part number T192019 from Curtiss-Wright Electro-Mechanical Corp. The order is designated as a critical application item with a delivery requirement of 118 days after receipt of order, targeting a required delivery date of March 30, 2027. Shipping is set as FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions are explicitly stated, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Technical and quality requirements are governed by the DLA Master List, and any substitute chemicals must be submitted for approval unless already authorized by specification requirements.
DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-04G9
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
KIT, OVERHAUL, VALVE
Solicitation # SPE7M0-26-T-061X
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
29--PUMP,FUEL,METERING AND
Solicitation # SPE7L5-26-T-5259
This contract is for the procurement of 93 units of fuel metering and distributing pumps, identified by NSN 2910-12-405-8709. The requirement is a total small business set-aside under NAICS code 336310, with delivery expected within 370 days of order. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, with a required delivery date of September 14, 2027. The contract mandates strict adherence to environmental and quality standards, specifically prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specific authorized components. Suppliers must comply with DLA packaging requirements, supply chain traceability documentation, and MIL-STD-129 marking standards. Because the item involves a metal casting process, contractors are directed to coordinate with the appropriate DLA assistance teams for tooling and material sourcing.
LAND SUPPLIER OPNS ENGINES

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
48--PLUNGER,PILOT VALVE
Solicitation # SPE7MC-26-T-233C
This contract is for the procurement of 68 units of a pilot valve plunger, identified by NSN 4820012482380 and Leslie Controls Inc. part number N09977. The item is designated as a critical application item. Delivery is required by May 3, 2029, with a delivery timeframe of 967 days. The shipment is to be delivered FOB Origin and will be received at the DLA Distribution San Joaquin facility in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. It also includes a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Quality and technical requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
DLA DIST SAN JOAQUIN

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
Supply of Air Brake Valves for Military Vehicle SystemsThe Department of Defense is seeking a subcontractor for the procurement of 11 air brake valves, identified by NSN 4820004363029, to be integrated into military vehicle brake systems. This commercial item procurement is managed by the Red River Receiving Bldg and falls under NAICS code 336310. The response deadline for this requirement is September 8, 2026, with the place of performance located in Texarkana, Texas. All units must be delivered to the government specified destination as outlined in the solicitation.
RED RIVER RECEIVING BLDG

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
Engine Coolant Radiator SupplyThis subcontract, issued by the Strategic Acq Program Directorate under the Department of Defense, requires the supply of 49 military-spec engine coolant radiators identified by NSN 2930011320978. The contractor must ensure all units comply with specific technical standards, utilizing ASTM D3951 for packaging and MIL-STD-129 for labeling requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336310. It was posted on August 26, 2026, with a response deadline of September 10, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
DIBBS
PUMP, FUEL, METERING AND
Solicitation # SPE7LX-26-T-0905
This contract, identified as solicitation SPE7LX-26-T-0905, is issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of 39 fuel metering and distributing pumps. The items are identified by NSN 2910-01-671-3404 and correspond to General Motors part number 12731367. This is a total small business set-aside under NAICS code 336310. The delivery is set for 146 days after order, with a required delivery date of December 19, 2026, and a need ship date of February 2, 2027. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking, as well as federal specification MIL-P-16789 for pump preservation. Inspection and acceptance will occur at the destination.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
GENERATOR, ENGINE AC
Solicitation # SPE7L5-26-T-5218
This contract is for the procurement of four AC engine generators, identified by NSN 2920-01-689-1861 and Ford Motor Company part number HC3Z-10346-C. The acquisition is managed by the Department of Defense Land Supplier Operations Engines under solicitation number SPE7L5-26-T-5218. Delivery is required within 110 days, with a need ship date of December 28, 2026. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
GLOW PLUG
Solicitation # SPE7L5-26-T-5187
This contract is for the procurement of glow plugs, identified by NSN 2920016775372 and General Motors part number 12725202. The total order consists of 250 units divided into two line items: 18 units for delivery to DLA Distribution Albany in Georgia and 232 units for delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeframe is set at 62 days after the order is placed, with required delivery dates spanning from January to February 2027. The agreement specifies that shipping is FOB Origin, with inspection and acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. There is a zero percent quantity variance allowed for these items. The contract is managed by the Department of Defense under solicitation number SPE7L5-26-T-5187.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
PUMP, FUEL, CAM ACTUA
Solicitation # SPE7LX-26-U-9518
This solicitation, issued by DLA Land and Maritime under number SPE7LX-26-U-9518, is a Request for Quotations for an Indefinite Delivery Contract (IDC) for cam-actuated fuel pumps. The procurement is a Women-Owned Small Business set-aside with an estimated annual quantity of 29 units and a contract maximum value of $350,000. The contract is intended for a one-year period, with an estimated delivery timeframe of 40 days after order. The items are identified as Commercial Off the Shelf (COTS) and critical application items. All deliveries are to be made within the continental United States, FOB Origin, with inspection and acceptance occurring at the destination. The contract includes stringent technical and environmental requirements, specifically prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, with limited functional exceptions. Compliance with various military standards is required, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging data, and MIL-P-16789 for the preservation of centrifugal pumps. Offerors must also adhere to domestic sourcing mandates, such as the Buy American Act and the Berry Amendment, and provide disclosure if using non-domestic materials. Additionally, the government will not evaluate offers for items produced via additive manufacturing unless specifically authorized. Administrative requirements include the use of Wide Area Workflow (WAWF) for electronic invoicing and payment requests, and strict adherence to cybersecurity and safeguarding protocols for covered defense information.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in about 16 hours
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-04F2
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of four O-rings under NSN 5331-66-125-4847. The contract requires a rapid delivery turnaround of five days after the order is placed. The primary point of contact for this requirement is Kristina Derry, and the place of performance is located in Texarkana, Texas. The contract is subject to several strict technical and quality requirements, including DLA packaging standards and source approval request documentation. Contractors must maintain full supply chain traceability documentation and ensure that all delivered items are free of asbestos and Class I ozone depleting chemicals. Any substitute chemicals used must be submitted for official approval.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 339991
New
DIBBS
PACKING WITH RETAIN
Solicitation # SPE7L3-26-T-213L
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support under solicitation number SPE7L3-26-T-213L, is for the procurement of 549 units of Packing with Retain, identified by part number 5330-00-626-4883. The contract requires delivery within 62 days after receipt of order, with performance taking place at Hill AFB. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a C3PAO. Additionally, the project involves technical data subject to ITAR and EAR export controls. To access this data, contractors must have an approved US/Canada Joint Certification Program certification, complete specific DOD export-control training and questionnaires, and receive approval from the DLA controlling authority.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336330
New
DIBBS
TIE ROD END, STEERING
Solicitation # SPE7L3-26-U-0683
Solicitation SPE7L3-26-U-0683 is an Indefinite Delivery Contract issued by the Department of Defense, Land Supplier Ops Vehicle SPT, for the procurement of steering tie rod ends under NSN 2530-00-670-4579. The contract specifies an estimated annual quantity of 116 units with a maximum contract value of 350,000.00 dollars. Delivery is required within 75 days after the delivery order, with terms set as FOB Origin and both inspection and acceptance occurring at the destination. The procurement is governed by the DLA Master List of Technical and Quality Requirements, and the manufacturer must adhere to strict prohibitions against using Class I ozone-depleting chemicals. Technical execution requires compliance with MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for marking and labeling, and RP001 for palletization. Because the item may require specific casting or forging tooling that the government does not possess, contractors are directed to the DLA Casting and Forging Assistance Request process for sourcing support. Administrative requirements include the use of Wide Area WorkFlow for electronic invoicing and payment requests. Proposals must be submitted electronically via the DIBBS portal by August 26, 2026, and must include all mandatory representations and certifications regarding entity size and socioeconomic status.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L3-26-T-213Z
This contract is for the procurement of 305 units of a critical gun part identified as a hand gun guard. The item is classified as a defense article subject to International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. The procurement includes a restricted technical data package from Knights Armament Company, necessitating a signed license agreement and strict adherence to export control regulations for technical data. Key quality and compliance requirements include Contractor First Article Testing and potential Product Verification Testing, with inspections conducted by the DCMA QAR at the actual manufacturer's facility. The contractor must comply with CMMC Level 2 certification and specific DLA packaging and quality standards. Certificates of Conformance are not authorized for this item. Delivery is set for 382 days after order, and the contract prohibits the use of Class I ozone depleting chemicals.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336330
New
DIBBS
SHAFT, STEERING COLUMN
Solicitation # SPE7L3-26-T-213M
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 14 steering column shafts under NSN 2530-01-446-5277. The contract is designated as a total small business set-aside with a delivery requirement of 335 days after receipt of order. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be shared with foreign persons without prior authorization from the Department of State or Commerce. Eligible contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires to access the necessary technical data. All items must also adhere to DLA packaging requirements for procurement.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-214C
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of one gasket under National Stock Number 5330-01-225-4213. The contract requires delivery within 20 days after receipt of the order. The procurement is governed by NAICS code 339991 and is managed by the Defense Logistics Agency, with a response deadline of September 8, 2026. The contract mandates strict adherence to technical and quality requirements, including specific packaging standards to protect items from ultraviolet rays using waterproof, greaseproof, and opaque bags. Supplies must be entirely free of asbestos and cannot contain intentionally added mercury, except for specific functional exceptions. All deliverables must comply with DLA packaging requirements and the removal of government identification from non-accepted supplies.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
FRAME SECTION, STRUC
Solicitation # SPE7L3-26-T-214G
This solicitation, identified as SPE7L3-26-T-214G, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of four structural frame sections under NSN 2510-01-576-9031. The contract requires delivery within 66 days after receipt of order and falls under NAICS code 332999. Performance is designated for New Cumberland, Pennsylvania. The contract carries stringent security and compliance requirements, including CMMC Level 2 certification via a C3PAO and the protection of covered defense information. Furthermore, the technical data is subject to ITAR and EAR export controls. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification, complete specific DOD export-controlled technical data training, and receive approval from the DLA controlling authority.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPECI
Solicitation # SPE7L3-26-T-213V
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 79 nonmetallic special shaped section seals under NSN 5330-01-114-7698. The contract requires delivery within 160 days after receipt of order and specifies that all supplied items must be completely free of asbestos. The supplier must adhere to strict quality and packaging standards, including MIL-STD-130N for identification marking and MIL-DTL-117 for waterproof, greaseproof, and opaque packaging to prevent deterioration from ultraviolet rays. Compliance with DLA master technical requirements, packaging protocols, and covered defense information regulations is mandatory for all shipments, including direct vendor delivery and foreign military sales.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-214E
This solicitation, issued by the Department of Defense under the agency Land Supplier Opns Vehicle Spt, is for the procurement of two gaskets identified by NSN 5330-00-802-6376. The contract requires delivery within 121 days after receipt of order and specifies that the items must be free of asbestos. All supplies must adhere to DLA packaging requirements and follow specific technical and quality standards as outlined in the DLA Master List. The contract mandates strict compliance with environmental and marking regulations, specifically prohibiting the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components. Items must meet NAVAIR aircraft launch and recovery equipment traceability requirements, with bare item markings including the contract number, NAWC CAGE, and part number as specified in the technical data drawings. Performance is set for New Cumberland, PA, and the solicitation is managed by Susan Diamond.
Aircraft Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-213H
This solicitation, identified as SPE7L3-26-T-213H, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of 39 units of preformed packing, part number 5330-01-553-2264. The contract is designated as a total small business set-aside under NAICS code 339991, with a delivery requirement of 167 days after the order is placed. Performance is located in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the prohibition of Class I ozone-depleting chemicals. Compliance with MIL-STD-130N for identification marking and CMMC Level 2 certification is required. Additionally, the contract contains stringent export control regulations under ITAR and EAR, restricting the disclosure of technical data to authorized persons and requiring contractors to maintain approved JCP certification and complete mandatory training.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L3-26-T-213W
This contract, identified as SPE7L3-26-T-213W, is a total small business set-aside for the procurement of 128 units of packing retainers under NSN 5330-01-718-4600. The delivery is required within 118 days, with a need ship date of January 5, 2027, and a final required delivery date of March 28, 2027. Shipments are to be delivered FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah. The agreement mandates strict adherence to technical and quality requirements, including the prohibition of class I ozone depleting chemicals and the restriction of mercury unless specifically authorized. Due to the risk of ultraviolet ray deterioration, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements for procurement.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336320
New
DIBBS
FILLER NECK, VEHICULAR
Solicitation # SPE7L3-26-T-213U
This contract is a solicitation for the procurement of two vehicular filler necks under NSN 2590-00-999-2121, intended for use with M-113A1, M-113A2, and M-113A3 personnel carrier systems. The acquisition is managed by the Department of Defense Land Supplier Operations Vehicle Support, with a delivery requirement of 173 days after receipt of order. Compliance requirements include CMMC Level 2 certification and adherence to DLA packaging and quality standards. The contract strictly prohibits the use of Class I ozone-depleting chemicals and mandates strict export control of technical data under ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-214J
This contract is for the procurement of four helical compression springs, identified by NSN 5360-01-632-5154 and part number 3921896C1. The order is designated as a critical application item and is managed under solicitation number SPE7L3-26-T-214J. Delivery is required within five days of order, with the shipping destination set as the HQ HSC Erbil SSA in Iraq. The agreement mandates strict adherence to DLA technical and quality requirements, specifically referencing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination, and the shipment is designated as FOB Origin.
Spring Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details