Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FILTER, FLASHLIGHT

Active
SPE4A6-26-T-33HEFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-26-T-33HE, issued by the DLA Aviation ASC Commodities Division, seeks quotes for 1,280 flashlight filters under NAICS code 335139. This is a commercial off-the-shelf procurement with a required delivery date of March 14, 2027, and a need ship date of March 17, 2027. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination per FAR 52.246-2. The contract mandates strict adherence to MIL-STD-129 for marking, including a specific fragile marking code, and requires compliance with DLA packaging requirements and hazardous material labeling under the Hazard Communication Standard. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except where functionally required. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. Quotations must be submitted through the DIBBS portal by September 28, 2026.

General Info

DLA seeks quotes for 1,280 flashlight filters due March 14, 2027, via DIBBS.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335139 - Electric Lamp Bulb and Other Lighting Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-33HE - Request for Quotations

PDF•18 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
VICTORIA BURCHAM
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILTER,FLASHLIGHT
FILTER,FLASHLIGHT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
COMMERCIAL OFF THE SHELF ITEM. THE PROCUREMENT
AGENCY HAS COMMERCIAL CATALOG DATA ADEQUATE FOR
THE NSN/Part Number: 6230-00-504-8342 Quantity: 1,280 EA Purchase Request: 7018413810QTY: 1280 Delivery: 169 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335139
New
DIBBS
LAMP
Solicitation # SPE4A6-26-T-35LQ
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
SEARCHLIGHT
Solicitation # SPE8E7-26-T-3955
DLA Troop Support is soliciting quotes for the procurement of 15 searchlights under NSN 6230013928379. The items are to be delivered to HQ HSC ARCENT ASG-J H5 within five days after the order is received. This requirement is designated as a total small business set-aside under NAICS code 335139, with approved sources identified as 0G9U6 MBPKG-B and 0G9U6 MBPKG-B-DOD. The solicitation, numbered SPE8E726T3955, was posted on September 22, 2026, with a response deadline of October 5, 2026. All quotes must be submitted electronically via the provided link, as hard copies of the solicitation and technical drawings are not available. Interested parties should direct inquiries to the buyer listed in the solicitation document or through the DIBBS portal.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE4A6-26-T-35AV
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
International
HealthPRO Procurement Services Inc. - Notice of Planned Procurement - HealthPRO Canada – 02940 Lamps and Ballasts Contract Commencing December 01, 2026
Solicitation # AB-2026-06415
HealthPRO Procurement Services Inc. has issued a Request for Proposal under solicitation number AB-2026-06415 for the procurement of lamps and ballasts. This contract is scheduled to commence on December 01, 2026, with the place of performance located in Alberta. Interested parties must submit their responses by the deadline of October 16, 2026, at 4:00 PM. The primary point of contact for this procurement is Candice Mendolia, the Category Lead for Strategic Sourcing, who can be reached via email for any inquiries regarding the submission process.
HealthPRO Procurement Services Inc.

POSTED

1 day ago

DEADLINE

in 24 days
View Details
NAICS: 335139
New
International
Lamps and Ballasts
Solicitation # SS02940
HealthPRO Procurement Services Inc. has issued a Request for Proposal under solicitation number SS02940 for the supply of lamps and ballasts. The opportunity is managed through Biddingo.com, where the full RFP package and any subsequent addendums or amendments will be posted. The response deadline for this solicitation is October 16, 2026, at 4:00 PM. This procurement is associated with the Saskatchewan Public Sector and 3SHealth, though participation by 3SHealth remains subject to their existing contracts. Interested parties should direct inquiries to the primary point of contact, Candice Mendolia, via the provided HealthPRO email address. Performance of the contract is expected to take place within Saskatchewan.
3sHealth

POSTED

1 day ago

DEADLINE

in 24 days
View Details
NAICS: 335139
New
DIBBS
Flashlight Filter Supplier
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335139
New
DIBBS
Supply of Lamp Ballasts (NSN 6250015256378)This subcontract involves the procurement or manufacture of two lamp ballast units under National Stock Number 6250015256378 for prime contractors supporting the Defense Logistics Agency. The contractor is responsible for ensuring all items are packaged according to RP001 DLA Packaging Requirements and that all marking and labeling adhere to MIL-STD-129 standards. The contract is categorized under NAICS code 335139 and falls under the jurisdiction of the Department of Defense. The solicitation was posted on September 21, 2026, with a response deadline of October 1, 2026.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 335139
New
DIBBS
Supplier of Incandescent Lamps (MS25239-4501)
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335139
New
DIBBS
Supply of Cartridge Lamps (NSN 6240013679626)This subcontract involves the supply of 57 cartridge lamps under NSN 6240013679626 for prime contractors supporting DLA Aviation. The selected provider must manufacture or source the units, ensuring all items are marked according to RQ017 and packaged in compliance with MIL-STD-2073-1E and MIL-STD-129. Delivery is required as FOB Origin, with the place of performance located in Greensboro, North Carolina. To qualify, the contractor must maintain a quality system compliant with SAE AS9003 or ISO 9001 and strictly adhere to the Buy American requirements specified in DFARS 252.225-7001. This requirement is managed by the ASC Commodities Division of the Department of Defense under NAICS code 335139.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335139
New
DIBBS
Lampholder Supply (NSN 6250-01-127-6113)
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335139
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-34DU
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335139
New
DIBBS
BALLAST, LAMP
Solicitation # SPE8E7-26-T-3942
Solicitation SPE8E7-26-T-3942 is a fixed-price request for quotations issued by the Defense Logistics Agency for the procurement of two lamp ballasts, identified by NSN 6250015256378. The requirement is associated with NAICS code 335139 and specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of September 17, 2026. Delivery is FOB Origin, and the items are to be shipped to Andersen Air Force Base in Guam. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951, MIL-STD-129, and RP001 for palletization, with DLA Master List requirements taking precedence. Inspection and acceptance will occur at the destination. The procurement incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and hazardous material labeling per 29 CFR 1910.1200. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-35DD
This contract is a solicitation for the procurement of flat washers under NSN 5310012097979, issued by the Department of Defense ASC Commodities Division. The total requirement consists of 12,693 units divided across three line items: 11 units for DLA Distribution Barstow, 1,011 units for DLA Distribution Albany, and 11,671 units for DLA Distribution New Cumberland. Delivery is required within 12 days after receipt of order, with various need ship dates ranging from October 2026 to September 2028. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination. Strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. The items are designated as critical application items, with references to part numbers from Oshkosh Defense LLC and Rolls-Royce Solutions America Inc.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-35FV
This contract is for the procurement of 532 close tolerance screws, identified by NSN 5305-01-462-2698. The items are designated as critical application components and must adhere to specific technical and quality requirements outlined in the DLA Master List, including tailored quality standards for manufacturers and non-manufacturers. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan required unless otherwise specified. Delivery is set for 146 days after the order, with a required delivery date of May 4, 2027, shipping FOB Origin to DLA Distribution San Diego. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement. The contract specifies a zero percent quantity variance and designates the point of inspection and acceptance at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-35GE
This contract is for the procurement of 29 flat washers, identified by NSN 5310015930887 and part number AAST50WT. The agreement is managed by the ASC Commodities Division of the Department of Defense under solicitation number SPE4A6-26-T-35GE. Delivery is required within 171 days, with a required delivery date of February 21, 2027, and shipping is set as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The supplier must adhere to strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards per ASTM D3951 and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Additional compliance mandates include the removal of government identification from non-accepted supplies and adherence to covered defense information protocols.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A6-26-T-35BB
This contract is for the procurement of three plain studs, identified by NSN 5307009509387, under solicitation SPE4A6-26-T-35BB. The items are designated as critical application items and require critical item source inspection. Delivery is set for 171 days after receipt of order, with a need ship date of March 21, 2027, and a final required delivery date of July 28, 2027. The goods are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The procurement is subject to several DLA Master List technical and quality requirements, including specific standards for packaging, quality conformance inspection, and bare item marking. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001. Quality sampling will be conducted according to MIL-STD-1916 or ASQ H1331, and the contract authorizes the use of Certificate of Conformance procedures per FAR 52.246-15. Technical specifications are governed by TDP Rev B Gen 3 and associated SAE and QAP standards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-35GS
This contract is for the procurement of 16 close tolerance screws, identified by NSN 5305014627886. The items are designated as critical application items and must adhere to specific technical and quality requirements set forth in the DLA Master List. Approved manufacturers and part numbers include entities such as The Boeing Company, SPS Technologies, and Howmet Global Fastening Systems. The delivery is set for 286 days after the order, with a required ship date of July 14, 2027, and a final delivery date of February 2, 2028. Shipping is FOB Origin and destined for DLA Distribution San Joaquin in Tracy, California. Compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging is required, and sampling must follow MIL-STD-1916 or ASQ H1331 standards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-35LA
This contract is for the procurement of 1,000 socket head cap screws, identified by NSN 5305015928384 and McMaster-Carr part number 92196A327. The agreement specifies a delivery timeframe of 171 days, with a required delivery date of March 6, 2027, and a need ship date of March 21, 2027. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific guidelines for physical identification, bare item marking, and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements for procurement.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-35LZ
This contract is for the procurement of 192 blind rivets, identified by NSN 5320016587191 and part number NAS1919B08S06. The items must adhere to technical specifications NAS1919 Revision 8 and NAS1900 Revision 6. Delivery is required within 171 days, with a required delivery date of December 11, 2026, and a need ship date of March 21, 2027. The shipping and delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with terms set as FOB Origin. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging and marking requirements are governed by MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. The contract also incorporates specific DLA technical and quality requirements, including the removal of government identification from non-accepted supplies and physical item marking.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 213113
New
DIBBS
PIN, SHOULDER, HEADLESS
Solicitation # SPE4A6-26-T-35GC
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-35GC, is for the procurement of 731 headless shoulder pins identified by NSN 5315-01-416-8190. The contract is a Service-Disabled Veteran-Owned Small Business Set-Aside with a delivery requirement of 171 days after receipt of order. Performance is located in Texarkana, Texas, and the response deadline is September 30, 2026. The agreement is subject to stringent technical and quality requirements, including DLA packaging standards and higher-level quality controls. It mandates strict adherence to cybersecurity protocols, specifically CMMC Level 2 self-assessment and third-party assessment requirements. Furthermore, the contract contains critical export control restrictions under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific Department of Defense training to handle technical data.
Support Activities for Coal Mining

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, ASSEMBLED WA
Solicitation # SPE4A6-26-T-35CA
This contract is for the procurement of 433 plain nuts with assembled washers, identified by NSN 5310-01-144-9589 and part number MS21244-10C. The order is governed by the DLA Master List of Technical and Quality Requirements, with specific adherence to NASM21244 Revision 3 and FF-N-836F. Key compliance mandates include the prohibition of intentionally added mercury, strict adherence to DLA packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E, and the removal of government identification from non-accepted supplies. The delivery is set for 104 days after order, with shipping designated FOB Origin to DLA Distribution San Joaquin in Tracy, California. Quality assurance will be managed via destination inspection and acceptance, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. The contract specifies a zero percent quantity variance and requires palletization in accordance with DLA procurement requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA
Solicitation # SPE4A6-26-R-XE03

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332216
New
DIBBS
PULLER, MECHANICAL
Solicitation # SPE4A6-26-T-35NS
DLA Aviation is soliciting quotes for the procurement of three mechanical pullers under NSN 5120017109497. The approved source for this item is 9PVP9 SP-60-AA. Delivery is required to DLA Distribution W1A8 within 171 days after the order is placed. This opportunity is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 332216. The solicitation, identified by number SPE4A626T35NS, is available exclusively as an electronic RFQ, and quotes must be submitted electronically by September 30, 2026. No hard copies, specifications, or drawings are available for this request. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided email contact.
Saw Blade and Handtool Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
CATCH, CLAMPING
Solicitation # SPE4A6-26-T-35TL
This contract is for the procurement of 29 clamping catches, identified by NSN 5340-01-126-9576 and part number 70216-02402-138. The item is designated as a critical application item for the Sikorsky Aircraft Corporation. Delivery is required within 171 days, with a need ship date of March 21, 2027, and an original required delivery date of October 9, 2027. The shipment is to be delivered FOB Origin to DLA Distribution Corpus Christi, Texas. The agreement mandates adherence to DLA packaging requirements and the DLA Master List of Technical and Quality Requirements. Specific quality standards include the use of an approved sampling plan that meets or exceeds ASQ H1331 or MIL-STD-1916. Packaging must comply with MIL-STD-129 and ASTM D3951 for non-hazardous materials, while hazardous materials must follow requirement IP025. Item Unique Identification is not required for this request.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS