Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, SHOULDER, HEADLESS

Active
SPE4A6-26-T-35GCFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-35GC, is for the procurement of 731 headless shoulder pins identified by NSN 5315-01-416-8190. The contract is a Service-Disabled Veteran-Owned Small Business Set-Aside with a delivery requirement of 171 days after receipt of order. Performance is located in Texarkana, Texas, and the response deadline is September 30, 2026. The agreement is subject to stringent technical and quality requirements, including DLA packaging standards and higher-level quality controls. It mandates strict adherence to cybersecurity protocols, specifically CMMC Level 2 self-assessment and third-party assessment requirements. Furthermore, the contract contains critical export control restrictions under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific Department of Defense training to handle technical data.

General Info

DoD procurement of 731 shoulder pins; SDVOSB set-aside; delivery in Texarkana, Texas.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

213113 - Support Activities for Coal MiningView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, USA

Set-Aside

SDVOSBC

Documents

(1)

SPE4A6-26-T-35GC.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Ericka Mosley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,SHOULDER,HEADLESS
PIN, SHOULDER, HEADLE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5315-01-416-8190 Quantity: 731 EA Purchase Request: 7018459148QTY: 731 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 213113
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-34AG
Solicitation SPE4A6-26-T-34AG is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 48 quick release pins, identified by NSN 5315-01-614-7182. The procurement is fully competitive and requires the items to be manufactured according to the current revision of the applicable military or non-government part standard. Delivery is required by March 14, 2027, with the destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The government will not evaluate or award contracts to offers utilizing additive manufacturing processes. Quality assurance is stringent, requiring inspection and acceptance at the origin. Manufacturers must maintain a quality system complying with SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must adhere to ASTM D3951 and RP001, while marking must comply with MIL-STD-129 and RQ017. The contract incorporates various FAR and DFARS clauses, including Buy American Act and Berry Amendment compliance, and provides a price evaluation preference for certified HUBZone small businesses. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
DIBBS
RETAINER AND ROLLERS, B
Solicitation # SPE4A6-26-T-33UP
Solicitation SPE4A6-26-T-33UP is a request for quotations issued by the DLA Aviation ASC Commodities Division for 140 units of retainer and roller bearings, identified by NSN 3110-01-503-4241. This is a source-controlled procurement for critical application items, requiring manufacture and testing in accordance with cited limited rights data. Approved sources include Allison Transmission Inc, Daimler Truck North America LLC, Oshkosh Defense LLC, and Tactical Wheeled LLC. The requirement is set aside for Women-Owned Small Business concerns, and eligible offerors must be certified by the SBA or an approved third-party certifier. The contract imposes strict domestic sourcing restrictions per DFARS 252.225-7016, requiring bearings to be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component cost originating from these regions. A contractor's declaration regarding the domestic or foreign nature of the material is mandatory. Quality standards require the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and preservation must adhere to MIL-DTL-197M and MIL-STD-129, with inspection and acceptance occurring at the origin. Delivery is specified as FOB Origin to DLA Distribution Red River in Texarkana, Texas, with a required delivery date of April 17, 2027. Payment and receiving reports must be processed through the Wide Area Workflow system.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-T-32LR
Solicitation SPE4A6-26-T-32LR is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 67 units of thrust washer bearings, identified by NSN 3120015028712. This item is classified as a commercial off the shelf product and is designated as a critical application item. The procurement is governed by the DLA Master List of Technical and Quality Requirements, with specific quality standards requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. The contract specifies delivery as FOB Origin under the First Destination Transportation program, with a required delivery date of January 16, 2027, and a need ship date of March 16, 2027. Inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific requirements for preservation and container types. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS cybersecurity standards for safeguarding covered defense information.
ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 213113
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-32UY
ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 213113
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-32ZS
Solicitation SPE4A6-26-T-32ZS, issued by the DLA Aviation ASC Commodities Division, seeks quotes for 237 headless straight retaining pins (NSN 5315-01-418-0934). The required hardware consists of pins with a 1/8 inch diameter and 1-3/16 inch length, designed to be peened over during installation. The delivery period is 163 days, with a need ship date of March 8, 2027, and a final required delivery date of May 3, 2027. Delivery is FOB Origin to DLA Dist San Joaquin in Tracy, California, under the First Destination Transportation program. The contract mandates strict quality and technical compliance, requiring manufacturer inspection systems to meet SAE AS9003 or ISO 9001 standards. Inspection and acceptance will occur at the origin, with a requirement of zero non-conformances in sample lots. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. Cybersecurity standards are enforced through DFARS 252.204-7012 and CMMC Level 2 certification requirements. Offerors must submit their quotations by September 25, 2026, to the DLA Aviation office in Richmond, Virginia.
ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 213113
New
DIBBS
PIN, LOCK
Solicitation # SPE4A5-26-T-448X
ASC SUPPLIER OPER OEM DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 213113
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L2-26-T-0679
Solicitation SPE7L2-26-T-0679 is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 20 straight shafts, identified by NSN 3040015176224. The procurement is managed by the Land Supplier Ops Wheeled Vehicles office, with a response deadline of September 28, 2026. The required delivery date and need ship date are both set for July 9, 2027, with a delivery period of 283 days. Shipping is designated as FOB Origin, and the items are to be delivered to DLA Dist San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following RP001 requirements. Inspection and acceptance will occur at the destination. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and restricts the intentional addition of mercury, except in specific authorized cases. Compliance with the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is required. Invoicing and payment must be processed through the Wide Area WorkFlow system.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L1-26-T-13C0
This solicitation, issued by DLA Land and Maritime Land Supply Chain under number SPE7L1-26-T-13C0, is a request for quotations for the procurement of four shoulderered shafts, identified by NSN 3040-01-192-9197. The procurement is classified under NAICS code 213113 and requires a delivery period of 143 days after order acknowledgment, with an original required delivery date of February 19, 2027. While the solicitation includes provisions for small business representations, it is explicitly noted as not being a small business set-aside. The items are to be delivered FOB Destination to the DLA Distribution New Cumberland Facility in Pennsylvania, though offers should be submitted based on FOB Origin in accordance with the First Destination Transportation program. The contract incorporates rigorous technical, quality, and cybersecurity standards. Specifically, it requires Cybersecurity Maturity Model Certification (CMMC) Level 2 and mandates that covered defense information applies. Technical and quality requirements are integrated via the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E and RP001, with marking requirements strictly following MIL-STD-129. Administrative compliance includes the use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Additionally, the contractor must comply with various federal regulations, including the Buy American Act, prohibitions on hexavalent chromium, and restrictions regarding the acquisition of items from certain foreign military companies.
LAND SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-29TQ
Solicitation SPE4A6-26-T-29TQ is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 14 sleeve bearings, identified by NSN 3120-01-097-7673 and part number C135755-1. The requirements specify that the items must be manufactured in accordance with drawing C135755 Rev C and reference QAP 13873. Delivery is required within 171 days after order, with a need ship date of March 14, 2027, and a final required delivery date of March 19, 2027. The supplies are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements and requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with a strict prohibition on the use of mercury or mercury compounds in preservation and packaging. Additionally, the solicitation includes standard federal and defense clauses regarding the Buy American Act, safeguarding covered defense information, and the use of the Wide Area WorkFlow system for electronic invoicing.
ASC COMMODITIES DIVISION

POSTED

7 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 213113
DIBBS
SPRING
Solicitation # SPE7L1-26-T-11N2
LAND SUPPLY CHAIN

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 213113
SLED
ARFQ-0313-DEP2700000007-1 | AML - Harmonds Creek Portals Phase II
Solicitation # ARFQ-0313-DEP2700000007-1
The West Virginia Department of Environmental Protection, Abandoned Mine Lands, is soliciting bids for the Harmonds Creek Portals Phase II Construction/Reclamation project located in Putnam County, West Virginia. This fixed-period contract requires the contractor to provide all labor, equipment, and supplies for site preparation, the installation of wet, dry, and standard bar gate mine seals, and the construction of drainage channels and road crossings. The project must be completed within 120 days of the notice to proceed, with total payments not to exceed 500,000 dollars. Bids must be submitted electronically via the wvOASIS VSS Portal by September 23, 2026. The award process involves two separate evaluations to satisfy state and county funding requirements, which may result in a single or multiple contract awards. Mandatory requirements for bidders include attendance at the pre-bid meeting, the provision of a 5 percent bid bond, and the ability to provide performance and labor/material payment bonds for 100 percent of the contract value. Selected vendors must comply with Davis-Bacon wage rates, the Build America, Buy America Act, and NEPA compliance for off-site borrow areas. The contract includes a liquidated damages clause of 1,000 dollars per working day of delay, and pricing must remain firm for the life of the contract. Final acceptance is contingent upon the delivery of certified as-built drawings and quality control certificates from a state-approved laboratory.
West Virginia

POSTED

23 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 213113
Federal
Demolition and Removal Services
Mark Twain National Forest

POSTED

26 days ago

DEADLINE

in about 24 hours
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-35DD
This contract is a solicitation for the procurement of flat washers under NSN 5310012097979, issued by the Department of Defense ASC Commodities Division. The total requirement consists of 12,693 units divided across three line items: 11 units for DLA Distribution Barstow, 1,011 units for DLA Distribution Albany, and 11,671 units for DLA Distribution New Cumberland. Delivery is required within 12 days after receipt of order, with various need ship dates ranging from October 2026 to September 2028. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination. Strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. The items are designated as critical application items, with references to part numbers from Oshkosh Defense LLC and Rolls-Royce Solutions America Inc.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-35FV
This contract is for the procurement of 532 close tolerance screws, identified by NSN 5305-01-462-2698. The items are designated as critical application components and must adhere to specific technical and quality requirements outlined in the DLA Master List, including tailored quality standards for manufacturers and non-manufacturers. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan required unless otherwise specified. Delivery is set for 146 days after the order, with a required delivery date of May 4, 2027, shipping FOB Origin to DLA Distribution San Diego. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement. The contract specifies a zero percent quantity variance and designates the point of inspection and acceptance at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-35GE
This contract is for the procurement of 29 flat washers, identified by NSN 5310015930887 and part number AAST50WT. The agreement is managed by the ASC Commodities Division of the Department of Defense under solicitation number SPE4A6-26-T-35GE. Delivery is required within 171 days, with a required delivery date of February 21, 2027, and shipping is set as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The supplier must adhere to strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards per ASTM D3951 and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Additional compliance mandates include the removal of government identification from non-accepted supplies and adherence to covered defense information protocols.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A6-26-T-35BB
This contract is for the procurement of three plain studs, identified by NSN 5307009509387, under solicitation SPE4A6-26-T-35BB. The items are designated as critical application items and require critical item source inspection. Delivery is set for 171 days after receipt of order, with a need ship date of March 21, 2027, and a final required delivery date of July 28, 2027. The goods are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The procurement is subject to several DLA Master List technical and quality requirements, including specific standards for packaging, quality conformance inspection, and bare item marking. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001. Quality sampling will be conducted according to MIL-STD-1916 or ASQ H1331, and the contract authorizes the use of Certificate of Conformance procedures per FAR 52.246-15. Technical specifications are governed by TDP Rev B Gen 3 and associated SAE and QAP standards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-35GS
This contract is for the procurement of 16 close tolerance screws, identified by NSN 5305014627886. The items are designated as critical application items and must adhere to specific technical and quality requirements set forth in the DLA Master List. Approved manufacturers and part numbers include entities such as The Boeing Company, SPS Technologies, and Howmet Global Fastening Systems. The delivery is set for 286 days after the order, with a required ship date of July 14, 2027, and a final delivery date of February 2, 2028. Shipping is FOB Origin and destined for DLA Distribution San Joaquin in Tracy, California. Compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging is required, and sampling must follow MIL-STD-1916 or ASQ H1331 standards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-35LA
This contract is for the procurement of 1,000 socket head cap screws, identified by NSN 5305015928384 and McMaster-Carr part number 92196A327. The agreement specifies a delivery timeframe of 171 days, with a required delivery date of March 6, 2027, and a need ship date of March 21, 2027. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific guidelines for physical identification, bare item marking, and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements for procurement.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-35LZ
This contract is for the procurement of 192 blind rivets, identified by NSN 5320016587191 and part number NAS1919B08S06. The items must adhere to technical specifications NAS1919 Revision 8 and NAS1900 Revision 6. Delivery is required within 171 days, with a required delivery date of December 11, 2026, and a need ship date of March 21, 2027. The shipping and delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with terms set as FOB Origin. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging and marking requirements are governed by MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. The contract also incorporates specific DLA technical and quality requirements, including the removal of government identification from non-accepted supplies and physical item marking.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, ASSEMBLED WA
Solicitation # SPE4A6-26-T-35CA
This contract is for the procurement of 433 plain nuts with assembled washers, identified by NSN 5310-01-144-9589 and part number MS21244-10C. The order is governed by the DLA Master List of Technical and Quality Requirements, with specific adherence to NASM21244 Revision 3 and FF-N-836F. Key compliance mandates include the prohibition of intentionally added mercury, strict adherence to DLA packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E, and the removal of government identification from non-accepted supplies. The delivery is set for 104 days after order, with shipping designated FOB Origin to DLA Distribution San Joaquin in Tracy, California. Quality assurance will be managed via destination inspection and acceptance, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. The contract specifies a zero percent quantity variance and requires palletization in accordance with DLA procurement requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA
Solicitation # SPE4A6-26-R-XE03

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332216
New
DIBBS
PULLER, MECHANICAL
Solicitation # SPE4A6-26-T-35NS
DLA Aviation is soliciting quotes for the procurement of three mechanical pullers under NSN 5120017109497. The approved source for this item is 9PVP9 SP-60-AA. Delivery is required to DLA Distribution W1A8 within 171 days after the order is placed. This opportunity is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 332216. The solicitation, identified by number SPE4A626T35NS, is available exclusively as an electronic RFQ, and quotes must be submitted electronically by September 30, 2026. No hard copies, specifications, or drawings are available for this request. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided email contact.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
CATCH, CLAMPING
Solicitation # SPE4A6-26-T-35TL
This contract is for the procurement of 29 clamping catches, identified by NSN 5340-01-126-9576 and part number 70216-02402-138. The item is designated as a critical application item for the Sikorsky Aircraft Corporation. Delivery is required within 171 days, with a need ship date of March 21, 2027, and an original required delivery date of October 9, 2027. The shipment is to be delivered FOB Origin to DLA Distribution Corpus Christi, Texas. The agreement mandates adherence to DLA packaging requirements and the DLA Master List of Technical and Quality Requirements. Specific quality standards include the use of an approved sampling plan that meets or exceeds ASQ H1331 or MIL-STD-1916. Packaging must comply with MIL-STD-129 and ASTM D3951 for non-hazardous materials, while hazardous materials must follow requirement IP025. Item Unique Identification is not required for this request.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-35SB
This contract is for the procurement of 35 close tolerance screws, identified by NSN 5305-01-560-1287 and part number 3M927-5L14. The screws must meet specific dimensions of 5/16 inch 24-UNJF-3A by 1.406 inches in length. This is a source-controlled acquisition, meaning the items must be manufactured and tested according to cited limited rights data. Only approved sources or vendors with traceability to approved sources, such as The Boeing Company or Howmet Global Fastening Systems, are eligible to quote. Vendors not currently listed as approved must obtain source approval from the OEM and submit the required documentation to the DLA. The delivery requirement is 20 days after the order, with the final destination being the ROKAF LC Consolidated Supply Depot in South Korea. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, and packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements. Marking of the property must follow MIL-STD-130N and MIL-STD-129. The contract specifies a zero percent quantity variance and requires inspection and acceptance to take place at the point of origin.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS