Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Groundwater Sampling and Monitoring Well Installation

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the installation of monitoring wells and the conduct of groundwater sampling at the DFSP Norwalk facility, with activities including well purging, real-time field parameter measurements, and proper sample preservation to ensure data integrity. All work must adhere to established environmental and regulatory protocols to support accurate assessment of groundwater conditions. The effort is classified as a subcontract under the NAICS code 213113, indicating it falls under support activities for mining, and is managed by the Defense Logistics Agency under the U.S. Department of Defense. The contract was posted on July 20, 2026, and the performance location is tied to the Norwalk site, though specific city and state details are not provided. The associated contract and delivery order identifiers are SPE60325D5003 and SPE60326FA4W5, respectively, with procurement details accessible via the DIBBS portal.

General Info

Install monitoring wells and sample groundwater at DFSP Norwalk per DoD protocols, NAICS 213113, contract SPE60325D5003.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

213113 - Support Activities for Coal MiningView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE603-26-F-A4W5.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PROJECT PLANNING AND MANAGEMENT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Install monitoring wells and conduct groundwater sampling, including purging, field parameter measurement, and sample preservation at DFSP Norwalk.

Similar Contracts

Same NAICS industry code

BRACKET, VEHICULAR COMP

Solicitation # SPE7L4-26-T-6474

This contract, identified as SPE7L4-26-T-6474, is for the procurement of 127 units of vehicular mounting brackets under NSN 2590-01-528-1762. The order is managed by the Department of Defense through the LSO Combat Vehicles and Armament agency. Key technical specifications include part number TV050009, with associated manufacturers listed as AMZ Alabama Inc. and BAE Systems Tactical Vehicle Systems LP. The delivery terms specify a 168-day window with a required delivery date of December 23, 2026, and a need ship date of February 16, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Red River in Texarkana, Texas. Compliance is required for DLA packaging standards, specifically RP001 and ASTM D3951, and labeling must adhere to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, including the removal of government identification from non-accepted supplies per RQ011.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

SHAFT KEY, AIRCRAFT,

Solicitation # SPE4A6-26-T-25AJ

Solicitation SPE4A6-26-T-25AJ is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of one aircraft shaft key, identified by NSN 5315015836619 and part number 15738-S from Better Engineering Manufacturing Inc. This item is designated as a critical application item. The required delivery date is August 24, 2026, with a delivery window of five days after receipt of order. Shipping is to be handled via the fastest traceable means to the Fleet Readiness Center in Lemoore, California, with terms set as FOB Origin. The contract mandates strict quality and compliance standards, including inspection and acceptance at the origin per FAR 52.246-2. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, with specific AQL levels assigned for critical, major, and minor attributes. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while item unique identification is not required. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards. All quotes must be submitted through the DLA Internet Bid Board System.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, BALL, DUPLEX

Solicitation # SPE4A6-26-T-24VG

This contract is for the procurement of 11 duplex ball bearings, identified by NSN 3110-00-624-1542 and part number AA59624-401TAFTU. The bearings must have a 37 pound nominal preload and adhere to specific technical and quality requirements, including a preference for MIL-P-197H and preservation and packaging standards per MIL-DTL-197M. Delivery is required within 20 days, with inspection and acceptance occurring at the point of origin. A critical requirement of this solicitation is the domestic sourcing restriction. The bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331, and packaging must comply with DLA requirements and MIL-STD-129.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SHAFT ASSEMBLY, CONT

Solicitation # SPE7L1-26-T-04X8

This solicitation from the Department of Defense Land Supply Chain is for the procurement of three shaft assemblies under part number 2520-00-017-2563. The contract requires delivery within 20 days after receipt of order. The primary point of contact for this requirement is Kristina Derry. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a C3PAO and adherence to phosphate coating supplier certification standards. Additionally, the contract involves technical data subject to ITAR and EAR export controls. Access to this data is restricted to contractors with an approved US/Canada Joint Certification Program certification who have completed specific DOD export-controlled technical data training and questionnaires.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Demolition and Removal Services

Mark Twain National Forest

POSTED

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7L3-26-T-206T

This contract is for the procurement of one mounting bracket, identified by NSN 5340-01-523-1678, under solicitation number SPE7L3-26-T-206T. The item must be delivered within five days of order to Joint Base Lewis McChord, Washington. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging, the removal of government identification from non-accepted supplies, and the prohibition of Class I ozone-depleting chemicals. The contractor must adhere to specific technical data packages and Army drawings, utilizing DCSC drawing 16236 CS-2300-0001 for chemical agent resistant coatings where applicable. Quality assurance involves inspection and acceptance at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Additionally, the contract specifies specialty metal requirements per DFARS regulations and requires marking and labeling in accordance with MIL-STD-129.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Demolition (Chimney Removal)This subcontract for the City of Salem, Massachusetts, involves the controlled demolition and partial removal of specific chimney sections for prime contractors. The work is located on Washington Street in Salem and requires the contractor to obtain all necessary demolition permits while maintaining strict adherence to safety compliance standards. The solicitation was posted on August 19, 2026, with a response deadline of September 18, 2026. Managed by the COSPD Purchasing department under NAICS code 213113, the contract focuses on the successful delivery and removal of the specified building components.

COSPD - Purchasing

POSTED

DEADLINE

Soil Vapor Well InstallationThe City of Pittsburg seeks a subcontractor to install soil vapor wells to assess potential vapor intrusion risks and collect soil vapor samples for laboratory analysis. This effort is focused on evaluating subsurface vapor migration that could impact indoor air quality, typically in areas with historical industrial activity or contamination concerns. The work involves precise drilling and installation of monitoring wells designed to capture representative vapor samples from various depths, following industry-standard protocols to ensure data reliability and regulatory compliance. The contract is open to qualified vendors with experience in environmental site assessment and vapor intrusion investigations, and responses must be submitted by September 11, 2026. Performance of the work is required within the city limits of Pittsburg, California, with the zip code 94565, under the NAICS code 213113 for support activities for mining.

City of Pittsburg

POSTED

about 1 month ago

DEADLINE

Deeper-Zone Groundwater Monitoring Well InstallationThe contract involves drilling and installing deeper monitoring wells in Pittsburg, California, specifically to evaluate the vertical extent of groundwater contamination, with a focus on perchloroethylene (PCE). The work is critical for understanding how deeply and widely the contaminant has migrated below the surface, informing remediation strategies and long-term environmental management. This subcontract is part of an ongoing remediation effort by the City of Pittsburg and requires specialized drilling expertise to reach deeper aquifers without compromising the integrity of existing monitoring systems. The opportunity is open for response until September 11, 2026, with a posted date of August 4, 2026, and is classified under the NAICS code 213113 for drillers of oil and gas wells, indicating the technical nature of the drilling operations required. Performance of the work is strictly limited to the Pittsburg area with a zip code of 94565, and the project demands adherence to environmental standards and precise well construction protocols to ensure accurate data collection. There is no set-aside designation, and the contract does not specify a point of contact, requiring potential bidders to use the provided online link for further details and submission procedures.

City of Pittsburg

POSTED

about 1 month ago

DEADLINE

Shallow-Zone Groundwater Monitoring Well InstallationThe City of Pittsburg is soliciting a subcontract to install monitoring wells in shallow aquifers to support groundwater sampling for petroleum-hydrocarbon contamination analysis. The project requires the deployment of properly constructed wells to access and collect representative samples from near-surface groundwater zones, ensuring accurate detection and assessment of hydrocarbon pollutants. Work must be performed within the city limits of Pittsburg, California, with a zip code of 94565, and must adhere to industry standards for well construction, sampling protocols, and environmental compliance. The solicitation was posted on August 4, 2026, and requires responses to be submitted no later than September 11, 2026, at 9:00 PM. This procurement is classified under NAICS code 213113, which pertains to support activities for mining, indicating a focus on field-based environmental monitoring services. All contractors must be prepared to meet technical and regulatory requirements for groundwater sampling and well installation in this specific geographic area.

City of Pittsburg

POSTED

about 1 month ago

DEADLINE

Geotechnical Drilling – Hollow Stem Auger BoringsThe contract requires the performance of ten hollow stem auger borings at a site in San Diego, with each borehole extending to depths between 10 and 30 feet. The work includes collecting soil samples at designated intervals, managing the temporary storage of drill cuttings on site, and fully restoring the ground surface to its original condition after drilling is complete. All activities must adhere to geotechnical standards to ensure accurate subsurface data collection and environmental compliance. The project is part of a subcontract under the San Diego Unified Port District and is classified under NAICS code 213113, indicating it relates to oil and gas field drilling services, though the actual scope is strictly geotechnical in nature. Execution is expected to follow protocols that prioritize safety, minimal site disruption, and proper documentation of subsurface findings for engineering and planning purposes.

San Diego Unified Port District

POSTED

about 1 month ago

DEADLINE

Geotechnical Drilling – Mud Rotary BoringsThe contract requires the execution of five mud rotary borings to depths ranging from 60 to 150 feet using truck-mounted drill rigs, with all work to be performed in San Diego. The scope includes the collection of soil cuttings during drilling and their temporary storage in 55-gallon drums, ensuring proper handling and containment of subsurface materials. The work falls under NAICS code 213113 and is structured as a subcontract under the San Diego Unified Port District, with a posted date of July 24, 2026. All performance activities are localized to the San Diego area, though specific site addresses and contact details are not provided. The project is part of broader geotechnical investigations, likely supporting infrastructure or development initiatives managed by the Port District.

San Diego Unified Port District

POSTED

about 1 month ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Adhesive Hardener (COTS)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

HAZMAT Packaging and International Freight Forwarding

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Corrosion Preventive Compound (NSN 8030-01-696-4654)

Adhesive Manufacturing

POSTED

DEADLINE

Supply of Rack Piston (Moog P/N CC80197-001)

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Paint Coating System Kit Supplier

Paint and Coating Manufacturing

POSTED

DEADLINE

Supply of Green Solvent Thinned Enamel (Aerosol)

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

Polyurethane Coating Material Supplier

Paint and Coating Manufacturing

POSTED

DEADLINE

Supply of Lusterless Fast Dry Enamel (Olive Drab)

Paint and Coating Manufacturing

POSTED

DEADLINE

Precision Casting and Forging for Solenoid Valve Components

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solenoid Valve Supply (NSN 4810-01-451-8137)

Industrial Valve Manufacturing

POSTED

DEADLINE

Supply of Decals (NSN 7690-01-575-7778)

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Supplier of Automatic Smoke Alarms (NSN 6350-01-661-3650)This subcontract involves the supply of 10 automatic smoke alarms matching NSN 6350-01-661-3650 for prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier must ensure strict adherence to the DLA Master List of Technical and Quality Requirements RA001, follow packaging standards per RP001, and comply with government identification removal guidelines as specified in RQ011. The contract is managed under NAICS code 423610 for the Department of Defense and is scheduled for a response deadline of September 14, 2026. Performance for the delivery of these units is designated for FPO 96666.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE