Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Filter

Active

Z4948State & Local

Response Deadline08/12/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the procurement of fuel filters specifically approved for Mercedes Benz and Detroit Diesel 15-liter engines, with the approved manufacturer part number being MER-BENZDDE/A5410900151. This solicitation, identified by number Z4948, is issued by Nashville Electric Service under the Tennessee state agency, targeting commercial suppliers capable of providing certified diesel fuel filtration components that meet exacting technical specifications for heavy-duty engine applications. The solicitation is open to all eligible vendors without specific set-aside designations, and responses must be submitted by the deadline of August 12, 2026, at 7:00 PM Eastern Time. All performance and delivery obligations are centered in Nashville, Tennessee, with no alternate locations specified. The primary point of contact for questions and submissions is Alan Martinez, Procurement Contact, reachable via email at amartinez@nespower.com or phone at 615-747-3720. Interested parties can access the full solicitation details and submission portal through the official vendor portal at https://vendor.nespower.com/?bid=Z4948. The posting date of August 6, 2026, marks the official opening of the bidding window, and participation requires strict adherence to the stated technical requirements and submission deadlines to ensure consideration.

General Info

Procure MER-BENZDDE/A5410900151 fuel filters for Mercedes and Detroit Diesel engines by August 12, 2026, in Nashville.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

423840 - Industrial Supplies Merchant WholesalersView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(1)

RFB Z4948 Filter Fuel Benz/Det Diesel

PDF•rfb

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedAug 6

Solicitation

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 07:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, US

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, US

Contacts

Alan MartinezProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

FILTER FUEL BENZ/DET DIESEL FILTER, FUEL MERCEDES BENZ/DETROIT DIESEL 15 LITER ENGINE Approved Manufacturers and/or Part Numbers: MER-BENZDDE/A5410900151

Similar Contracts

Same NAICS industry code

RFQ 5416 Inventory parts

Solicitation # RFQ 5416

All bids for RFQ 5416 Inventory parts must be submitted exclusively through the E-procurement portal; submissions in any other format will be deemed non-responsive. Suppliers are required to use the official pricing table within the portal and include freight costs in their quoted prices. Lead time must be specified in days within the NOTES column of the bid table, representing the total time needed to fulfill the entire delivered quantity, with “stock” quotes still requiring a concrete lead time. If quoting a non-OEM or alternative part number, the format RM####### must be used in the lead time notes. Any core fees must also be entered in the NOTES field, and suppliers unable to provide a part must select “no bid.” The solicitation closes on August 7, 2026, at 3:00 PM, and inquiries should be directed to David Drummonds, Supply Chain Coordinator, at ddrummonds@go-metro.com or 513-632-7548. The procurement is managed by the Ohio Agency based in Cincinnati, with no set-aside classification specified.

POSTED

about 4 hours ago

DEADLINE

in about 20 hours

Defense-Compliant Packaging and Marking ServicesThe contract requires delivery of military-compliant packaging and labeling services aligned with DLA RP001, MIL-STD-2073-1E, and MIL-STD-129 standards, encompassing the full preparation of items for defense shipment including thorough cleaning and drying processes, adherence to specified container specifications, and proper marking and documentation for FOB origin shipment. All work must meet rigorous Department of Defense requirements to ensure durability, traceability, and compliance throughout the supply chain. The performance location is designated as Greensboro, North Carolina, with a zip code of 27409, and the work falls under NAICS code 423840 for wholesale trade of machinery and equipment. The solicitation is issued as a subcontract under the Land Supply Chain division of the Department of Defense, with a posted date of August 5, 2026, and a firm response deadline of August 17, 2026. Interested parties must submit proposals through the DIBBS platform using the provided solicitation link, and all deliverables must be fully compliant with federal military packaging and marking regulations to qualify for award. There is no set-aside designation or special procurement category specified, and the contract does not include a designated point of contact, requiring vendors to navigate the solicitation details directly through the provided online portal.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Domestic Supply Chain Compliance and ReportingAll materials used in production must be sourced exclusively from U.S. or designated foreign countries to ensure compliance with FAR and DFARS regulations, with full documentation maintained to verify origin and traceability throughout the supply chain. The subcontract requires strict adherence to domestic sourcing requirements and demands rigorous recordkeeping to demonstrate adherence to federal procurement standards. This contract is issued by the Department of Defense through the Maritime Supply Chain office and is open for response until August 12, 2026, with materials classified under NAICS code 423840 related to wholesale trade of miscellaneous durable goods. Failure to provide accurate documentation or source non-compliant materials will result in nonconformance and potential contract termination.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Commercial Packaging Services

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Domestic Sourcing and Material Traceability ComplianceThe contract requires the supply of U.S.-sourced synthetic rubber and associated packaging materials that strictly comply with the Buy American Act and the Berry Amendment, ensuring all materials are fully domestic in origin and manufactured in the United States. Compliance with these regulations is mandatory, and contractors must provide comprehensive origin certification and detailed traceability documentation to verify the source and production lineage of all materials throughout the supply chain. The requirement emphasizes full transparency and accountability to meet federal procurement standards for defense-related sourcing. Performance of this subcontract is designated for TEXARKANA, with a ZIP code of 75507-5000, and falls under NAICS code 423840, which pertains to wholesale trade of rubber and plastics materials and supplies. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the FLUID HANDLING DIVISION under the U.S. Department of Defense. All submissions must meet exacting compliance criteria, and failure to provide verifiable documentation of domestic content and origin will result in disqualification.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Specialized Packaging, Preservation, and MarkingThe contract requires specialized packaging, preservation, and marking of metal sheets in full compliance with ASTM A700, MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring the materials are protected against environmental degradation and maintained in mission-ready condition. This includes secure palletization methods and the application of NSN labeling to meet military logistics and inventory tracking protocols. All work must be performed to guarantee the integrity of the metal sheets during storage and transit, with strict adherence to defense-specific documentation and handling procedures. The solicitation is issued under a subcontract type by the Department of Defense through the Depot Oklahoma office, with performance required at Tinker AFB, Oklahoma, ZIP 73145-8000. The North American Industry Classification System code is 423840, indicating a focus on wholesale trade in metals and minerals. The response deadline is August 17, 2026, and the opportunity was posted on August 5, 2026, providing potential bidders approximately twelve days to prepare and submit their proposals. There is no set-aside designation specified, and the contract is open to eligible subcontractors capable of meeting the rigorous defense packaging and labeling requirements.

POSTED

DEADLINE

Packaging and Labeling Services for Defense Logistics

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply/Distribution of MIL-Spec Rope (Non-Manufacturer)A qualified distributor is required to supply and deliver 19 reels of fibrous nylon rope compliant with MIL-R-17343D specifications, ensuring full adherence to military standards for material quality, traceability, and documentation. The rope must be properly labeled and packaged according to military guidelines, with all necessary data packages provided to meet federal procurement requirements. This subcontract is a total small business set-aside, designated under the SBA program, and falls under NAICS code 423840 for wholesale trade of construction and mining equipment. The place of performance is fixed at Tracy, California, with a zip code of 95304-5000, and responses must be submitted by August 17, 2026, following the posting date of August 5, 2026. The contract is managed under the Department of Defense through the Construction & Equipment Manu & Con organization, and all delivery and compliance obligations must be fulfilled by a certified small business distributor, not the original manufacturer.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Military Packaging and Preservation ServicesThe contract seeks commercial and hazardous materials packaging services that strictly adhere to MIL-STD-129, ASTM D3951, and DLA IP025 standards, ensuring proper preservation techniques and secure palletization for military use. All work must meet rigorous defense specifications for durability, labeling, and handling of sensitive or dangerous goods, with compliance verified throughout the packaging and preparation process. The services are required for deployment in support of Department of Defense operations and must be executed with precision to ensure readiness, safety, and logistics efficiency. The solicitation is issued under NAICS code 423840 as a subcontract opportunity by the Electrical Devices Division of the Department of Defense, with performance required at Fort Eustis, Virginia, zip code 23604-5577. Interested parties must submit proposals by August 17, 2026, following the online solicitation posted on August 5, 2026. While no set-aside designation is specified, full compliance with federal packaging regulations and the ability to deliver consistent, auditable results are essential for qualification and award consideration.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Packaging, Marking, and Labeling Services

LAND SUPPLY CHAIN

POSTED

DEADLINE

TAPE, REFLECTIVE

Solicitation # SPE8E5-26-Q-0379

The contract pertains to the procurement of 125 units of reflective tape identified by NSN 9390-01-714-0005, with a delivery requirement of 90 days after award. Technical and quality specifications for this item are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA requirements, and non-accepted supplies must have all government identification removed prior to disposition. The technical data associated with this item is subject to export control under either ITAR or EAR, and its disclosure to foreign persons—regardless of location—is strictly regulated. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have received formal approval from the DLA authority. The solicitation number is SPE8E5-26-Q-0379, issued on August 5, 2026, with proposals due on August 12, 2026, under the jurisdiction of DLA Dist San Joaquin, a Department of Defense component, and inquiries may be directed to Willis Turner at the provided contact information.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

FAN, CIRCULATING

Solicitation # SPE8E9-26-Q-0647

The contract specifies the procurement of five circulating fans with NSN 4140-01-663-5974 under solicitation SPE8E9-26-Q-0647, issued by the Department of Defense through the Construction & Equipment MRO Service I office. The required supplies must comply with technical and quality standards referenced from the DLA Master List, packaging guidelines per MIL-STD-2073-1E and DLA packaging requirements, and marking standards in accordance with MIL-STD-129 without special markings. The unit of issue is each, with a firm fixed price and zero variance allowed in quantity. Delivery is due 168 days after award, with the point of origin as FOB and inspection and acceptance occurring at destination. All items must be palletized as mandated and shipped to the specified DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates adherence to federal procurement protocols including transportation guidelines and unit of issue alignment with ANSI X12 standards. The customer’s material need date is December 30, 2026, with the purchase request number 7016375410. The solicitation was posted on August 5, 2026, and responses are due by August 12, 2026. Hewlett-Packard Company DBA HP is the supplier for part number 654752-001, revision A, and all documentation must meet source approval requirements including technical and quality specifications denoted by R or I numbers. The contract prohibits removal of government identification from non-accepted supplies and requires full compliance with DLA’s packaging, marking, and shipping procedures. Primary point of contact for inquiries is Quiana Bowser, with all logistics and transportation protocols governed by DLAD procedural notes C19 and C20.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Solicitation # Z4946

The contract specifies a Ship Auger with precise technical specifications: a 7/16 inch diameter, 12 inch twist, and an overall length of 18 inches. Approved manufacturers and part numbers are limited to IRWIN 46607415T and GREENLEE 64-7/16, ensuring only certified components are accepted. The solicitation, identified by number Z4946, was posted on August 6, 2026, with a response deadline of August 12, 2026, at 7:00 PM. It is issued under a SLED procurement type by Nashville Electric Service, operating under the state of Tennessee. The place of performance and agency location are both in Nashville, Tennessee. Primary point of contact for all inquiries is Alan Martinez, Procurement Contact, reachable via email at amartinez@nespower.com or phone at 615-747-3720. Details and submissions must be completed through the vendor portal at the provided UI link.

Saw Blade and Handtool Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # Z4941

Nashville Electric Service is seeking proposals for 5-gallon red safety cans made of 20-gauge metal with flame arresters, as specified for safe storage and transport of flammable liquids. Only approved manufacturers and part numbers including PROTEC46155GAL, SECURRALICN55GAL, FLM-TMR115GAL, and JUSTRITE71501005GAL are acceptable, ensuring compliance with safety standards. The solicitation, identified by number Z4941, was posted on August 6, 2026, and responses must be submitted by 7:00 PM Eastern Time on August 10, 2026. This procurement is under the SLED category and will be fulfilled within Nashville, Tennessee. All inquiries and submissions should be directed to the primary procurement contact, K Kegley, via email at kkegley@nespower.com or phone at 615-747-3572. Detailed information and submission guidelines can be accessed through the vendor portal at the provided URL.

Other Metal Container Manufacturing

POSTED

about 14 hours ago

DEADLINE

Cleaner Tile and Grout Scrubber

Solicitation # Z4944

Nashville Electric Service is seeking proposals for a Cleaner Tile and Grout Scrubber under solicitation number Z4944, with responses due by August 10, 2026 at 7:00 PM Eastern Time. The contract is open to approved manufacturers and/or part numbers NEUTRON107288 and NEUTRONGROUTGENIE, specifying exact equipment requirements for cleaning tile and grout surfaces. This solicitation is designated for SLED government entities and is administered through the agency’s Tennessee office located in Nashville. Interested parties must submit responses via the vendor portal at the provided uiLink. Primary point of contact for inquiries is Bailey Allen, Procurement Contact, reachable by phone at 615-747-3724 or email at ballen1@nespower.com. The place of performance is confirmed to be in Nashville, Tennessee, with no set-aside classification specified.

Carpet and Upholstery Cleaning Services

POSTED

about 14 hours ago

DEADLINE

Solicitation # Z4947

Nashville Electric Service is seeking a hydraulic filter approved for use under the part number TELELECT TL71173 through a solicitation designated as Z4947. The solicitation was posted on August 6, 2026, with responses due by August 12, 2026, at 7:00 PM Eastern Time. This procurement is classified as a State, Local, or Educational (SLED) opportunity and is being managed by the agency’s procurement office located in Nashville, Tennessee. The required filter must be sourced exclusively from the approved manufacturer and part number listed; no substitutions are permitted. All deliveries and performance must occur within Nashville, Tennessee. Alan Martinez serves as the primary point of contact for procurement inquiries and can be reached via email at amartinez@nespower.com or by phone at 615-747-3720. Further details and submission instructions are available through the vendor portal at the provided UI link.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

Solicitation # Z4942

The solicitation calls for Flasher Strobe Poles equipped with a red strobe light featuring a 5 to 7 mile visibility range, mounted with a heavy duty ratchet strap designed for secure transportation of poles. Each unit must include two orange flags and come with required batteries already installed. Approved manufacturers are limited to HI-LINE HL7015-RO or AIRCRAFT 7015-RO, with equal alternatives permitted. The equipment is intended for use by Nashville Electric Service in Tennessee, specifically for pole-mounted transportation applications requiring high visibility and durability. The solicitation, numbered Z4942, was posted on August 6, 2026, with responses due by August 10, 2026, at 7:00 PM Eastern Time. All bids must be submitted through the agency’s vendor portal, and inquiries should be directed to the primary procurement contact, K. Kegley, at the provided phone number and email address.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # Z4940

The contract solicits two insulated nut driver tools rated for 1000 volts and compliant with ASTM F1505 standards, specifically a 1/2-inch model and a 9/16-inch model, each featuring a hollow shaft of six inches and an insulated handle for electrical safety. Approved manufacturers for the 1/2-inch variant include Salisbury, Jameson, Cementex, and WIHA with corresponding part numbers listed, while the 9/16-inch version has similarly designated approved suppliers with matching part identifiers. A total of four units are required, two of each size, with the item identified by the number ET32284179160 and specified in the NES Group/Class classification. The solicitation, issued by Nashville Electric Service under reference number Z4940, is open for response until August 10, 2026, and is targeted towards state, local, or educational entities with performance expected in Nashville, Tennessee. All submissions must be directed through the designated procurement contact at the agency, with the primary point of contact available via phone and email for inquiries regarding compliance, delivery, or qualification of the approved products.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

Voltage Detector

Solicitation # Z4943

The voltage detector is a compact, lightweight personal safety device designed to clip directly onto a standard hard hat, weighing less than one ounce and measuring 3.0 by 1.4 by 0.9 inches. It operates on a rechargeable 250 mAh lithium-polymer battery that fully charges in approximately 1.5 hours via a standard USB 2.0 Micro-B (5V) charger and provides up to 80 hours of continuous operation, unless frequent alerts are triggered. The device is built for durability with an IP-67 water resistance rating and functions reliably in extreme temperatures ranging from -20°C to 60°C (-4°F to 140°F), making it suitable for all weather conditions. It detects voltage, electric fields, and magnetic fields with a 360-degree range, even when signals are shielded by nonferrous materials such as earth, enabling detection of buried lines. The device provides directional feedback through a sequence of color-coded LED lights that indicate the location of the field source and includes seven adjustable sensitivity levels to tailor alert thresholds for varying work environments. An adaptive smart mode triggers warnings when ambient electromagnetic fields increase, whether due to movement toward an energized source or changes in field strength. Both audible and visual alerts activate simultaneously, with LED colors identifying the specific type of field detected. The unit also notifies the user when battery levels are low, ensuring continuous operational readiness. This device is procured under solicitation Z4943 by Nashville Electric Service in Tennessee, with responses due by August 12, 2026, and the approved manufacturer part number is SAFEGUARM01012.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 14 hours ago

DEADLINE

Solvent Cleaner

Solicitation # Z4945

Nashville Electric Service is seeking a natural citrus-based solvent cleaner approved for use as a non-caustic, non-acid, and non-corrosive preventative maintenance product designed for facility plumbing and fleet general degreasing applications. The solvent must be derived from natural citrus sources and approved under the manufacturer part number SUPERCOACTI-VATE-AM28781. This solicitation, identified by number Z4945, was posted on August 6, 2026, with responses due by August 12, 2026. The contract falls under a state and local government procurement category and is open to qualified vendors who can meet the specified technical requirements. All performance and delivery will occur in Nashville, Tennessee, and inquiries should be directed to Alan Martinez, Procurement Contact, at amartinez@nespower.com or 615-747-3720. Further details and submission procedures are available through the vendor portal at the provided link.

Soap and Other Detergent Manufacturing

POSTED

about 14 hours ago

DEADLINE

Deadend and Guying Tee 1" Bolts

Solicitation # Z4949

The contract specifies a deadend and guying tee designed for pole mounting with 1-inch bolts, featuring a flat base and hot-dipped galvanized construction for durability and corrosion resistance. It must provide provision for multiple guying attachments, each rated to a minimum ultimate strength of 35,000 pounds, ensuring structural integrity under substantial tension loads. The tee stem includes minimum 13/16-inch chamfered holes compatible with 3/4-inch shank or Y-clevis ball hardware, facilitating secure and reliable connections for guy wires. The item must meet strict performance and material standards to support utility pole infrastructure. Only approved manufacturers are acceptable, with Hughes BAS2720-G-18 or an equal alternative as the specified part. This solicitation, numbered Z4949, is issued by Nashville Electric Service in Tennessee and is open for responses until August 11, 2026, at 7:00 PM Eastern Time. The procurement is categorized under state, local, and education (SLED) funding and is aimed at acquiring components essential for maintaining and upgrading power distribution systems. All deliveries and performance must occur in Nashville, Tennessee. The primary point of contact for inquiries is Bailey Allen, reachable via email at ballen1@nespower.com or by phone at 615-747-3724. Additional details and the ability to submit bids are available through the vendor portal at the provided UI link.

POSTED

about 14 hours ago

DEADLINE

Supply of Proprietary Carpet & Upholstery Cleaner (14 oz. Spray Can)Nashville Electric Service is soliciting bids for the supply and delivery of a proprietary carpet and upholstery cleaner packaged exclusively in 14 oz. spray cans from pre-approved manufacturers, with no substitutions permitted under any circumstances. The contract is structured as a subcontract and falls under NAICS code 325611, indicating classification within the household and institutional cleaning compound manufacturing sector. All deliveries must meet the exact specification of the approved product in the designated packaging size, ensuring consistency and compatibility with existing cleaning protocols across facilities. The solicitation was posted on August 5, 2026, with a firm response deadline of August 11, 2026, at 7:00 PM, and the place of performance is designated as Nashville, with no alternate locations or exceptions allowed. Bidders must ensure full compliance with product authorization and packaging requirements to be considered eligible.

Soap and Other Detergent Manufacturing

POSTED

DEADLINE

Hazardous Waste Battery Management and DisposalNashville Electric Service is soliciting subcontract bids for the safe handling, transportation, and regulatory-compliant disposal of returned lead-acid automotive batteries classified as hazardous waste. The contract requires full adherence to environmental and safety standards throughout every phase of the process, including proper documentation and reporting to meet federal and state regulatory requirements. Work must be performed in Nashville, Tennessee, with all activities aligned to the NAICS code 562920 for hazardous waste collection and treatment services. Bids are due by August 11, 2026, with the solicitation posted on August 5, 2026, and interested parties must submit responses through the vendor portal provided in the official link. The subcontract does not specify a set-aside classification, and there is no designated point of contact listed for inquiries.

Materials Recovery Facilities

POSTED

DEADLINE

Supply of AGM Automotive BatteriesNashville Electric Service is soliciting bids for the procurement and delivery of four AC-DELCO 88864541 AGM automotive batteries, each rated at 760 CCA, under a subcontract arrangement. The procurement operates on an exchange basis, requiring the return of four used batteries in good working condition to facilitate proper disposal and recycling. The solicitation, posted on August 5, 2026, closes for responses on August 11, 2026, with deliveries expected to be performed in Nashville, Tennessee. The contract falls under NAICS code 335910, categorizing it within the manufacturing of other electrical equipment and components. All bids must be submitted through the official vendor portal at the provided link, and no set-aside provisions are indicated, leaving the opportunity open to all qualified suppliers.

Battery Manufacturing

POSTED

DEADLINE