Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Fire Alarm System Inspection & Testing Services

Active

State & Local

Response Deadline08/04/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of NFPA 72-compliant inspection and testing of fire alarm control panels and all associated devices across multiple facilities operated by Dallas Area Rapid Transit. The work is focused on ensuring full regulatory compliance and operational reliability of fire alarm systems throughout the transit system’s infrastructure. Contractors must demonstrate technical expertise in inspecting, testing, and documenting the functionality of alarm panels, initiating devices, notification appliances, and related components in accordance with the latest edition of NFPA 72 standards. This subcontract is open for response until August 4, 2026, with the solicitation posted on July 27, 2026. The NAICS code 541330 indicates that the work falls under architectural, engineering, and related services, with performance required at DART facilities across Texas. While specific locations and point of contact details are not provided, the scope demands consistent adherence to code, thorough documentation of findings, and timely remediation of any deficiencies identified during inspections. Contractors must be prepared to work on-site across multiple locations and maintain full compliance with all applicable fire safety regulations.

General Info

Inspect and test NFPA 72-compliant fire alarm systems across DART facilities in Texas through 2026.

Agency

Texas → Dallas Area Rapid TransitView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 07:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Dallas Area Rapid Transit

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas → Dallas Area Rapid Transit

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform NFPA 72-compliant inspection and testing of fire alarm control panels and associated devices across multiple DART facilities to ensure code compliance and system operability.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity contract for major construction projects across multiple delivery methods including Design Build, Progressive Design Build, and other alternative delivery models. The scope encompasses full lifecycle support from planning and design through construction and closeout, ensuring projects adhere to authorized schedules, budgets, and quality standards. This IDIQ will enable the Port to rapidly mobilize expert CM resources as new project opportunities arise without requiring separate solicitations for each engagement. Services will be performed at various locations within the Port’s jurisdiction, with primary point of contact being Hala Rabbo, and project management coordination handled by Ann Davidson. The contract is classified under NAICS code 541330 for Architectural, Engineering, and Related Services, and is forecasted for release in July 2026. Interested parties should note that while the solicitation number and set-aside details are not yet available, the procurement is intended to establish a long-term framework for ongoing construction management support across the Port’s capital improvement programs.

Construction Management

POSTED

about 7 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across the extensive facilities and infrastructure systems at Seattle-Tacoma International Airport, operating within a high-stakes, nonstop 24/7/365 environment. The scope centers on diagnosing and correcting performance gaps in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, occupant comfort, and system longevity, while ensuring compliance with all safety and regulatory mandates. Work is structured around Service Directives issued by Aviation Facilities and Infrastructure and executed in close coordination with Port of Seattle staff to meet defined deliverables and operational continuity goals. The contract is an Indefinite Delivery/Indefinite Quantity vehicle under NAICS code 541330, issued by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager, both reachable through dedicated phone lines and email addresses. All work is to be performed at the airport premises, and while the solicitation was posted in 2026, no set-aside details or funding caps are specified, indicating the potential for ongoing, scalable engagement based on facility needs. The procurement is not yet active, providing early visibility to interested parties ahead of eventual release.

Aviation Facilities & Infrastructure

POSTED

about 7 hours ago

DEADLINE

Field Inspection and Quality Verification ServicesTexas Department of Transportation is seeking qualified contractors to perform independent field inspections and compliance verification of repaired crash cushions to ensure proper alignment, structural integrity, and adherence to TxDOT and MASH safety standards. The work involves on-site evaluation of installed or refurbished crash cushions to confirm they meet all required engineering and safety criteria prior to reactivation or final acceptance. This subcontract opportunity is open to eligible parties who can demonstrate technical expertise in transportation safety systems and experience with state and national highway safety protocols. Bids must be submitted by August 18, 2026, at 4:30 PM Central Time, with the solicitation posted on July 27, 2026. The contract falls under NAICS code 541330 for engineering services and is classified as a subcontract under TxDOT’s procurement framework. Performance is expected to occur across Texas roadways where repaired crash cushions are deployed, though specific locations are not detailed in the posting. Interested parties should review the full solicitation details through the provided Texas SmartBuy link to understand evaluation criteria, reporting requirements, and submission guidelines.

Texas Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Quality Control and Submittal ManagementThe contract entails the coordination and preparation of shop drawings, product data, and samples for review and approval by the Architect/Engineer to ensure strict adherence to project specifications. This work is critical for maintaining compliance throughout the construction process and requires meticulous attention to detail, timely submission, and alignment with design intent and regulatory standards. The contractor is responsible for managing the entire submittal workflow, from initial preparation through final approval, ensuring all documentation meets the required quality and technical criteria. The solicitation is a subcontract for Quality Control and Submittal Management under NAICS code 541330, posted on July 27, 2026, with a response deadline of August 19, 2026. It is issued by the State of Utah and is open for proposals through the BonfireHub platform. The place of performance and specific office address are not detailed, but the work relates to projects under Utah’s jurisdiction. There is no set-aside designation or point of contact provided, and bidders must adhere to the outlined scope without additional guidance beyond the stated requirements.

POSTED

about 19 hours ago

DEADLINE

As-Built Record DocumentationThe contract titled As-Built Record Documentation requires the submission of updated as-built drawings and technical specifications that accurately reflect the final installed conditions of a project. This subcontract is focused on ensuring that all documentation aligns with the actual constructed state, capturing deviations, modifications, and final installations that may differ from original plans. The work involves meticulous field verification, data collection, and clear presentation of updated records to serve as a reliable reference for future maintenance, renovations, or regulatory compliance. The opportunity was posted on July 27, 2026, with a response deadline of August 26, 2026, and is categorized under NAICS code 541330, which pertains to architectural and engineering services. The contracting agency is the State of Utah, with no specific office address or point of contact provided. The place of performance details are not specified, indicating that the work may be project-specific and location-dependent. Subcontractors must be prepared to deliver precise, high-quality documentation in accordance with state standards and timelines.

POSTED

about 19 hours ago

DEADLINE

Shop Drawing and Submittal PreparationThe contract seeks specialized support for the preparation and submission of shop drawings, product data, and physical samples required for approval by architectural and engineering authorities. This work is critical to ensuring that materials, components, and systems align with project specifications and regulatory standards before implementation. The contractor is expected to coordinate closely with design teams to produce accurate, compliant, and timely submittals that meet rigorous technical requirements and deadlines. The opportunity is classified as a subcontract under NAICS code 541330, indicating it falls within architectural and engineering services. It was posted on July 27, 2026, with a response deadline of August 26, 2026, and is associated with the state of Utah, though specific location or office details are not provided. The solicitation is accessible via a public online portal, with no set-aside provisions indicated, meaning all qualified entities may respond without demographic or size-based restrictions.

POSTED

about 19 hours ago

DEADLINE

REQUEST FOR QUALIFICATIONS (RFQ) PROFESSIONAL ON-CALL AIRPORT ENGINEERING, ARCHITECTURAL & CONSTRUThe City of Swainsboro and the East Georgia Regional Airport Authority are soliciting qualified aviation consulting firms to provide on-call professional services in support of the Airport Capital Improvement Plan at the East Georgia Regional Airport in Swainsboro, Georgia. The scope of work encompasses a full range of engineering, architectural, and construction inspection/administration services including project planning, geotechnical and subsurface investigations, topographic surveying, environmental assessments, preliminary and final design, bidding support, and construction phase oversight. Services are expected to be provided as needed across multiple projects under the capital improvement plan, requiring firms to demonstrate expertise in airport-specific infrastructure, regulatory compliance, and federal aviation standards. Proposals must be submitted by the deadline of August 13, 2026, and the solicitation is open under the identification number PE-66723-NONST-2026-000000020. Interested firms should direct inquiries to Jerry Cadle at Jerry@cadlelawfirm.com, the designated point of contact. While the solicitation does not specify a set-aside or NAICS code, it is issued by a state and local government entity and requires responders to prove capability in delivering high-quality, compliance-driven aviation consulting services within the unique context of municipal airport development. Performance is expected to occur at the East Georgia Regional Airport in Georgia, with the selected firm required to maintain flexibility and responsiveness to meet the evolving needs of the airport’s capital improvement initiatives.

City of Swainsboro

POSTED

about 20 hours ago

DEADLINE

Structural Design and Engineering ServicesThe contract encompasses the full scope of engineering and design services for a custom outdoor structure, requiring detailed CAD modeling, thorough structural analysis, and the creation of comprehensive construction drawings that comply with all applicable safety and environmental regulations. The work must be executed to ensure structural integrity and long-term resilience under real-world conditions, with all deliverables aligned to industry best practices and regulatory requirements. This is a subcontract opportunity under NAICS code 541330, issued by DFW International Airport in Texas, with a very tight submission window opening on July 27, 2026, and closing just three days later on July 30, 2026. The place of performance and specific location details are not provided, but the project is tied to airport infrastructure, suggesting stringent compliance standards and potential coordination with operational authorities. Interested parties must respond promptly as the deadline is approaching rapidly and no set-aside provisions are specified for small businesses or other categories.

Dfw International Airport

POSTED

about 21 hours ago

DEADLINE

First Article Testing & Quality Certification ServicesThe contract requires independent execution and comprehensive documentation of First Article Testing in strict accordance with DI-NDTI-80809B, encompassing detailed inspection, precise measurement, and formal reporting to the Defense Logistics Agency. This work must be performed with full adherence to quality assurance standards and delivered results that validate compliance with technical specifications for defense-related components or systems. All testing activities, methodologies, and outcomes must be thoroughly recorded and submitted to DLA for review and certification. This subcontract, issued under a Total Small Business Set-Aside, is classified under NAICS code 541330 and is targeted exclusively at small businesses. The performance location and detailed office address are unspecified, but the contracting entity is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, allowing interested small businesses to submit proposals through the DIBBS platform. The requirement emphasizes accuracy, traceability, and regulatory compliance in delivering first article quality certification.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Quality Inspection and Conformance ServicesThe contract requires comprehensive quality inspection and conformance testing of shear bolts using zero-defect sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards, ensuring rigorous adherence to defect-free criteria throughout production. Full documentation of all testing procedures, results, and compliance records must be maintained and provided as part of delivery, leaving no room for ambiguity in quality assurance and traceability. This work is critical to confirming that shear bolts meet exacting military and industrial specifications without compromise. This is a total small business set-aside subcontract under NAICS code 541330, awarded by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance will be carried out under the direction of the DLA, though the specific place of performance is not detailed. Interested parties must submit responses through the designated DIBBS portal, and all activities must comply with federal subcontracting regulations and the stringent quality protocols defined by the referenced military and quality standards.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Quality Assurance & Government Inspection Support ServicesThe contract entails providing advanced inspection systems and comprehensive support services to facilitate government-led quality verification at the point of origin, ensuring full compliance with MIL-STD-1916 and ASQ Z1.4 standards. This includes establishing robust audit readiness protocols, maintaining accurate and accessible recordkeeping systems, and managing nonconformances through structured corrective action processes to uphold defect prevention and continuous quality improvement. The scope demands integration of inspection technologies and procedures that enable real-time data capture, traceability, and reporting to meet rigorous defense quality requirements. The work is classified as a subcontract under NAICS code 541330 and is being administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026. While specific performance locations and point of contact details are not provided, the nature of the services implies operations at supplier or manufacturing facilities where government quality verification takes place. Successful proposers must demonstrate experience with military standards, proven quality systems, and the ability to deliver scalable inspection infrastructure capable of supporting high-stakes defense supply chain integrity.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Technical Data Package Development and SubmissionThe contract entails the development and submission of complete technical data packages for both approved and alternate configurations of a voltage regulator set, requiring comprehensive engineering documentation and active management of change proposals. This effort must support precise technical compliance and configuration control throughout the lifecycle of the system, ensuring all data meets required standards for review and approval. The work is classified as a subcontract under a Total Small Business Set-Aside, with the NAICS code 541330 indicating engineering services, and is issued by the Department of Defense through the Maritime Supply Chain organization. The solicitation was posted on July 27, 2026, with a rigid response deadline of July 30, 2026, indicating a tightly constrained bidding window. The performance location is specified as Tracy, California, with a ZIP code of 95304-5000, and all deliverables must align with federal contracting requirements for technical data submission. All parties involved must be certified small businesses, as the set-aside is designated exclusively for small business concerns under FAR 19.5, and the contract is administered through the DLA’s DIBBS platform for sourcing and compliance.

MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

More opportunities from Texas → Dallas Area Rapid Transit

Same awarding agency

Pre-Bid Site Visit Coordination & DocumentationThe contract involves supporting the prime contractor in managing and documenting attendance for the mandatory pre-bid site visit across multiple DART facilities, ensuring all participants comply with attendance requirements and that their participation is properly recorded. This effort is critical to maintaining the integrity of the bidding process and ensuring all interested parties have equal access to site information prior to submitting proposals. The work requires coordination across various locations, attention to detail in documentation, and timely communication with stakeholders to meet strict deadlines. The opportunity is listed as a subcontract with a NAICS code of 541611, indicating it falls under management consulting services. It was posted on July 27, 2026, with a response deadline of August 4, 2026, giving potential bidders a week to prepare and submit their proposals. The contracting agency is Dallas Area Rapid Transit based in Texas, and while specific location details for performance or contact are not provided, the work is centered on DART’s facilities. Participation requires a clear understanding of logistical coordination and administrative documentation to support the prime contractor’s compliance obligations.

Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

Code-Compliant Fire Alarm System UpgradesThe contract requires the performance of code-mandated upgrades to existing fire alarm systems to ensure full compliance with current NFPA 72, International Building Code, and Americans with Disabilities Act standards. This includes adding new devices, relocating control panels, and updating notification appliances to meet modern safety and accessibility requirements. The work must be executed to align with prevailing regulatory frameworks, ensuring the system’s reliability, functionality, and accessibility for all occupants. The scope is focused solely on bringing existing infrastructure up to current legal and technical standards without expansion beyond necessary remediation. This subcontract is issued by Dallas Area Rapid Transit under the NAICS code 238220 for electrical and wiring installations and is open for bid with a response deadline of August 4, 2026. The solicitation was posted on July 27, 2026, and while no specific location details are provided, the work will occur within the jurisdiction of Texas where DART operates. The contract does not include set-aside provisions or targeted participation categories, and all interested parties must submit proposals by the stated deadline through the designated online portal.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 21 hours ago

DEADLINE

Fire Alarm Component Replacement & SupplyThe contract involves the supply and replacement of failed or obsolete fire alarm components including control panels, detectors, pull stations, horns, strobes, and circuit boards, all of which must be UL-listed to meet safety and regulatory standards. The work is scoped to ensure the continuous operational integrity of fire alarm systems across Dallas Area Rapid Transit facilities, requiring prompt response to failures and adherence to industry best practices for installation and compatibility. All replacement parts must be certified and sourced to maintain system compliance and reliability under fire safety codes. This subcontract is open for response until August 4, 2026, with the opportunity posted on July 27, 2026, under the NAICS code 423620 for wholesale trade of electrical equipment and supplies. The contract is managed by Dallas Area Rapid Transit in Texas, with no specified set-aside designation or point of contact details provided. Performance location and exact delivery requirements are not detailed, but the scope implies work must be carried out at various transit sites within the agency’s jurisdiction. Bidder qualifications will likely center on proven experience in fire alarm system maintenance, UL-listed product sourcing, and timely service capabilities.

Household Appliances, Electric Housewares, and Consumer Electronics Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Fire Alarm System Repair & TroubleshootingThe contract titled Fire Alarm System Repair & Troubleshooting requires the provision of on-demand technical services to identify, diagnose, and repair malfunctioning components within fire alarm systems, including control panels, circuits, and initiating devices. Services must be delivered promptly to ensure system integrity and compliance with safety standards, with a focus on minimizing downtime and maintaining operational reliability across the Dallas Area Rapid Transit network. The work is classified as a subcontract under NAICS code 811212, and responses are due by August 4, 2026, with the opportunity posted on July 27, 2026. Performance is expected to occur within the jurisdiction of Texas, though specific geographic details are not provided. The contracting entity is Dallas Area Rapid Transit, and no set-aside provisions or point of contact information are indicated.

Computer and Office Machine Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

Fire Alarm System Preventive MaintenanceDallas Area Rapid Transit is seeking a subcontractor to perform scheduled preventive maintenance on fire alarm control panels to ensure continuous and reliable system operation. The scope of work includes routine cleaning, battery testing, firmware verification, and comprehensive diagnostics of fire alarm systems across all designated locations. This maintenance is critical to maintaining compliance with safety standards and preventing operational failures. The contract is open for bids with a deadline of August 4, 2026, and falls under NAICS code 811212 for commercial and industrial machinery and equipment repair and maintenance. The opportunity is posted as a subcontract with no set-aside designation and is accessible through the DART Bonfire Hub portal.

Computer and Office Machine Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

Tax-Exempt Billing and Invoice Processing SupportThe contract involves preparing and submitting tax-exempt invoices to Dallas Area Rapid Transit, specifically excluding Texas sales and use taxes, while ensuring all documentation complies with applicable exemptions and regulatory requirements. The contractor is responsible for accurate invoice preparation, timely submission, and ongoing reconciliation of billing records to maintain compliance and avoid discrepancies. Payment terms are Net 30, requiring active follow-up to ensure timely remittance and resolution of any payment delays or invoicing issues. This subcontract supports administrative and financial operations for Dallas Area Rapid Transit, with all work performed in alignment with the agency’s tax-exempt status and internal financial protocols. The opportunity is open for response until July 31, 2026, and falls under NAICS code 541211, indicating it relates to accounting, tax preparation, bookkeeping, and payroll services. The place of performance and contact details are not specified, implying flexibility in execution location, though all work must effectively serve the Texas-based agency.

Offices of Certified Public Accountants

POSTED

about 21 hours ago

DEADLINE

Small Business Outreach and MBE/DBE/WBE Subcontracting CoordinationDallas Area Rapid Transit is seeking a contractor to strategically identify, engage, and ensure compliance reporting for Minority-, Women-, and Disadvantaged Business Enterprises within its supply chain to promote subcontracting participation. The contract focuses on outreach and coordination efforts designed to increase the involvement of MBE, WBE, and DBE firms in DART’s procurement processes, ensuring adherence to diversity and inclusion goals. The opportunity is posted under NAICS code 541611 and is categorized as a subcontract, with responses due by July 31, 2026. All activities will be performed in Texas, and contractors are expected to deliver comprehensive reporting and engagement strategies that align with DART’s broader objectives for equitable business development and supplier diversity.

Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

Logistics and FOB Destination Delivery ServicesThe contract involves the transportation and final-mile delivery of supplies to Dallas Area Rapid Transit in Texas under FOB Destination terms, requiring the contractor to manage all aspects of freight movement, including coordination, real-time tracking, and secure delivery to the specified destination. The contractor is responsible for ensuring compliance with FOB Destination conditions, meaning ownership and risk transfer only occur upon successful delivery to DART’s location, necessitating accurate documentation and proof of delivery for each shipment. This subcontract, classified under NAICS code 484220 for general freight trucking, is open for response until July 31, 2026, with all services performance expected to occur within Texas. The contracting entity is Dallas Area Rapid Transit, and while specific office or delivery addresses are not provided, the scope centers exclusively on logistical operations supporting DART’s supply chain needs. The contractor must maintain full visibility throughout the delivery process and be prepared to provide timely, verifiable evidence of completion for each delivery.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Quality Inspection and Conformance Testing ServicesQuality Inspection and Conformance Testing Services is a subcontract opportunity posted by Dallas Area Rapid Transit in Texas, seeking independent verification and testing of delivered goods to ensure full compliance with technical specifications, engineering drawings, and warranty requirements. The scope includes conducting objective assessments, generating detailed test reports, and managing non-conformances to maintain project integrity and quality standards. The solicitation was posted on July 27, 2026, with a response deadline of July 31, 2026, and falls under NAICS code 541380 for other scientific and technical consulting services. Performance location and specific point of contact details are not provided, but responses must be submitted through the specified online portal by the stated deadline.

Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

Supply of Conforming Products (Equipment, Materials, or Components)The contract requires the supply of commercial off-the-shelf or custom-manufactured products that fully conform to specified technical requirements, drawings, and manufacturer part numbers, ensuring exact compliance with established standards. All delivered items must meet stringent quality and performance criteria to be accepted under the terms of this agreement. Delivery must be FOB Destination to a location in Texas, meaning the vendor assumes all risk and responsibility for the goods until they arrive at the designated destination within the state. The contract is categorized as a subcontract under NAICS code 336350, which pertains to transportation equipment manufacturing, and is issued by Dallas Area Rapid Transit in Texas. The solicitation was posted on July 27, 2026, with a response deadline of July 31, 2026, indicating a very limited window for submissions. There is no set-aside classification specified, and no point of contact or detailed address information is provided, suggesting potential reliance on the linked portal for further details or clarifications.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ongoing Software Maintenance and SupportThe contract entails ongoing technical support and maintenance for AutoDesk and Revit software systems, focusing on post-deployment services to ensure uninterrupted operational performance. Responsibilities include managing software patches, implementing updates, and providing troubleshooting assistance to resolve technical issues promptly. The scope is designed to sustain system reliability and efficiency for users relying on these critical design and engineering platforms. This is a subcontract opportunity posted by Dallas Area Rapid Transit under NAICS code 541519 for other professional, scientific, and technical services. The solicitation was posted on July 27, 2026, with a response deadline of August 4, 2026. The place of performance and specific office details are not provided, and no set-aside type is specified. All proposals must be submitted through the designated portal prior to the deadline.

Other Computer Related Services

POSTED

about 21 hours ago

DEADLINE

Technical Training and User Adoption ServicesDallas Area Rapid Transit is seeking a subcontractor to develop and deliver customized training programs focused on Autodesk and Revit software for its staff, emphasizing hands-on learning and comprehensive training materials to drive user adoption. The contract falls under NAICS code 611430 and is titled Technical Training and User Adoption Services, with a response deadline of August 4, 2026, and was posted on July 27, 2026. The training must be tailored to meet the specific needs of DART personnel, ensuring practical skill development and effective integration of the software into daily operations. Performance is expected to occur within Texas, though exact location details are not specified. The opportunity is open for subcontractors to respond, and no set-aside preferences have been indicated.

Professional and Management Development Training

POSTED

about 21 hours ago

DEADLINE