Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FIRE DETECTION SC

Active
SPE4A6-26-T-08DEFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 10 units of Fire Detection SC with NSN 6320-01-549-7201 under solicitation SPE4A6-26-T-08DE, with a delivery requirement of 171 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment introduces a later revision. Sampling must comply with MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampling unless the contract specifies otherwise, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. Documentation for source approval requests must be submitted as required, and all supplies are subject to the Covered Defense Information clause. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware or supplies, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. The contracting office is the ASC Commodities Division under the Department of Defense, with performance at New Cumberland, PA, and primary point of contact Stephanie Cruz.

General Info

Procure 10 Fire Detection SC units, delivery in 171 days, zero non-conformances, no mercury except exempt uses.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Stephanie Cruz
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FIRE DETECTION SC
FIRE DETECTION SC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR THE NSN/Part Number: 6320-01-549-7201 Quantity: 10 EA Purchase Request: 7017571595QTY: 10 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334290
New
DIBBS
COVER, ELECTRONIC COMMUThis contract is for the procurement of a cover for electronic communication equipment, identified by NSN 5895012703108 and part number 13075913-019, with a quantity of 10 units. The item is classified as a Critical Application Item and must comply with strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers in the document. The use of ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without written approval from the Contracting Officer, though this restriction does not apply to commercial items or part-numbered-only components. Packaging must adhere to MIL-STD-2073-1E with specific procedures for preservation, wrapping, and unit containment, and all markings must follow MIL-STD-129 without special marking codes. The product must be palletized according to DLA packaging requirements and delivered FOB origin to the designated delivery point at the DLA Distribution New Cumberland Facility in Pennsylvania. Delivery is required within 171 days from the contract date, with an original required delivery date of November 28, 2026, and a needed ship date of January 17, 2027. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances during sampling, which must follow MIL-STD-1916 or a comparable zero-based sampling plan. Attributes are assigned verification levels and AQLs as specified, with unspecified attributes treated as major. The contract enforces strict configuration change management and prohibits deviations without formal engineering change proposals or variance requests. The unit of issue is each, with no permitted quantity variance. Transportation and shipping details are governed by DLA procedural notes, and all documentation references point to official DLA and DoD systems for compliance. The solicitation number is SPE4A7-26-T-587A, with a response deadline of July 29, 2026, and the contracting officer is Tamera Greene of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
COVER, ELECTRONIC COMMUThis contract is for the procurement of two units of a commercial off-the-shelf electronic cover component with part number MK2000-GL and NSN 5895-01-662-2568, sourced from BENDER INC. The item must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling procurement compliance. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA; all portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, and containerization, and all marking must follow MIL-STD-129 without special codes. The item must be delivered in two units within twenty days FOB destination, with no variance allowed in quantity. Delivery is to the USS RICHARD M MCCOOL JR LPD 29 at FPO AE 09591 using traceable transportation methods; parcel post is prohibited. Shipment must be tracked under RDD 777 and referenced with the transportation control number V3604961910449. The required delivery date is July 15, 2026, and the contract was issued under solicitation SPE4A7-26-T-587Q by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
Federal
Notice of Intent to Sole Source - Compunetix MVP Headsets
W7NR Uspfo Activity Nyang 174

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334290
New
Federal
SPE4A726R0712 - 5895 - CONVERTER, SIGNAL DATA / WSIC F
DLA Aviation

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334290
New
Federal
58--COMMUNICATIONS BAR, IN REPAIR/MODIFICATION OFThe Government intends to award a sole-source contract for two units of NSN 7H-5895-017200407, a communications bar requiring repair or modification, under FAR 6.302-1 due to the unavailability of competitive sourcing options. The Government does not own the data or intellectual property rights necessary to procure repairs or replacements from other sources, and acquiring those rights or reverse engineering the part has been deemed uneconomical. While the solicitation is not a request for competitive proposals, responsible sources may submit capability statements or proposals within 45 days of the notice publication, or 30 days if under an existing Basic Ordering Agreement, to inform the Government’s decision on whether to proceed without competition. All submissions will be evaluated solely for the purpose of determining if a competitive procurement is warranted, and the Government retains full discretion in deciding not to open the procurement to competition. The contract is associated with title 58—COMMUNICATIONS BAR, IN REPAIR/MODIFICATION OF, solicitation number N0010426QYABF, and is administered by the Navsup Weapon Systems Support Mech office located in Mechanicsburg, Pennsylvania. The point of contact for inquiries is Amelia E. Harper, reachable via email at AMELIA.E.HARPER.CIV@US.NAVY.MIL or phone at (771)229-4504. The notice was posted on July 18, 2026, with a response deadline of August 3, 2026. Supplies will be delivered FOB origin, meaning the vendor is responsible for preparing the items for shipment but not for transportation costs or risks beyond the point of origin. No set-aside status is designated, and the contract is issued under a presolicitation notice that does not obligate the Government to award a contract unless a decision is made to proceed with sole-source procurement based on the received responses.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
Federal
LOUDSPEAKER ASSEMBL
US Coast Guard

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334290
New
DIBBS
Manufacture of Electronic Component HousingsThe contract requires the production of 50 units of electronic component housings designated by NSN 5999016194043, all manufactured to meet strict military specifications. The scope encompasses not only the fabrication of the housings but also the proper packaging, labeling, and marking in accordance with defense standards to ensure traceability and compliance. These components are to be delivered directly to designated Defense Logistics Agency depots, with no flexibility in the delivery location. The work falls under NAICS code 334290, indicating classification within other electronic component manufacturing, and the contract is structured as a subcontract under the Department of Defense. The solicitation was posted on July 20, 2026, and the award is managed through the DLA’s procurement system, though no specific point of contact or place of performance details are provided.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 334290
New
DIBBS
Supply of Electromechanical ComponentThe contract involves the manufacture and delivery of a specialized electromechanical component with NSN 6685-01-506-9453 and part number 35393685, with order quantities ranging between 378 and 756 units per delivery, intended for integration into defense logistics systems. It is classified as a subcontract under NAICS code 334290, indicating it falls within the category of other electronic component manufacturing, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The contract was posted on July 20, 2026, and is linked to a specific award identifier but lacks detailed information on the prime contractor, point of contact, or specific delivery locations. The scope focuses exclusively on production and supply without specifying additional services such as installation, maintenance, or technical support.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 334290
New
DIBBS
Control Computer Unit SupplyThe contract mandates the supply of 20 units of a Control Computer Unit designated by NSN 5895015409895 and part number C05195C-1, to be delivered FOB Origin with full compliance to military quality and cybersecurity standards. Delivery is scheduled to the place of performance in Tracy, California, with a zip code of 95304-5000, and the requirement is part of a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses registered with the SBA. The North American Industry Classification System code for this contract is 334290, indicating it pertains to other electronic component manufacturing. The solicitation is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and is structured as a subcontract opportunity with a response deadline of July 28, 2026. The posting date is July 20, 2026, providing a limited window for qualified small businesses to submit proposals through the DIBBS portal.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334290
New
DIBBS
Pressure Gauge Supply for Defense Telecommunications EquipmentThe contract pertains to the supply of eight defense-related pressure gauges identified by NSN 6685016288412, intended for integration into telecommunications equipment used by the Department of Defense. The solicitation, issued under NAICS code 334290 and managed by the ASC SUPPLIER OPER OEM DIVISION, requires strict adherence to federal supply chain security and cybersecurity regulations, ensuring the components meet defense-grade standards for integrity and protection against tampering or compromise. The delivery location is specified as New Cumberland, PA, with a zip code of 17070-5002, indicating the operational context and logistics requirements tied to the U.S. military infrastructure in that region. The bid response deadline is set for July 28, 2026, with the solicitation posted on July 20, 2026, providing a narrow eight-day window for qualified subcontractors to submit proposals. This is a subcontract opportunity, meaning it is part of a larger acquisition chain, and bidders must demonstrate capability to satisfy not only technical specifications but also compliance obligations around classified data handling, supply chain provenance, and cybersecurity protections mandated for defense contractors. The absence of a set-aside designation suggests the contract is open to all eligible entities, but success will depend on proven experience with defense-grade instrumentation and full alignment with DoD procurement and security protocols. All submissions must be made through the official DIBBS portal linked in the documentation.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334290
New
DIBBS
Manufacture and Supply of Electronic Communication Equipment CoversThe contract pertains to the manufacture and delivery of six units of electronic communication equipment covers identified by NSN 5895-01-664-4798, with strict adherence to Department of Defense Logistics Agency technical, packaging, and marking specifications. All delivered items must meet the defined military standards for quality, durability, and compliance to ensure seamless integration into existing communication systems. The work is to be performed in accordance with subcontracting guidelines and is designated under NAICS code 334290, which corresponds to other communications equipment manufacturing. The solicitation was posted on July 20, 2026, with a response deadline set for July 28, 2026. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the location where the equipment will be delivered or inspected. The contracting entity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and the full details of the opportunity can be accessed via the provided DIBBS link, which serves as the official portal for submitting responses and obtaining further procedural information.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334290
New
DIBBS
SELECTOR CONTROL SUThe contract pertains to the procurement of a Selector Control Subassembly, identified by part number 843-01GY-PL and NSN 5895200025993, with a quantity of six units to be delivered under solicitation SPE4A7-26-T-582U. The item is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, inspection, and marking. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with preservation methods specified under QUP 001, and all marking must follow MIL-STD-129 without special codes. Mercury or mercury compounds are strictly prohibited in any packaging or preservation materials. Sampling for acceptance is governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major with corresponding verification levels or AQLs defined by contract. Delivery is FOB origin with a required delivery date of February 15, 2027, and a lead time of 165 days, with no variance allowed in quantity. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and the contract is a total small business set-aside under NAICS code 334290.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance & Incident ReportingThe contract requires full implementation of NIST SP 800-171 cybersecurity controls to safeguard controlled unclassified information within the contractor’s systems, alongside the development of a comprehensive System Security Plan that documents how these controls are applied and maintained. The contractor must establish processes to ensure continuous compliance with these standards and be prepared to report any cyber incident affecting covered defense information within 72 hours, in strict accordance with DFARS 252.204-7012 requirements. This effort is critical for maintaining the integrity and security of sensitive government data handled under this subcontract. This subcontract is issued under the Department of Defense by the ASC Commodities Division, with the NAICS code 541512 indicating it pertains to computer systems design services. While no set-aside type or specific point of contact is provided, the solicitation remains open for responses until August 4, 2026, with a posting date of July 21, 2026. The place of performance has not been specified, and bidders must review the full solicitation through the provided DIBBS link to ensure alignment with all technical, administrative, and reporting obligations tied to this cybersecurity compliance effort.
Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection & Sampling ServicesThe contract requires the provision of quality inspection and sampling services adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with AQL criteria, where zero nonconformances are mandatory for acceptance. Inspections must be conducted with precision to ensure all delivered products meet the defined quality standards without exception, reflecting a zero-tolerance policy for defects. The work is classified as a subcontract under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and the solicitation posted on July 21, 2026. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations or as directed by the contracting office. Interested parties must review the full solicitation through the provided DIBBS link to understand specific deliverables, reporting requirements, and compliance obligations beyond the sampling standards outlined.
Engineering Services

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
Military-Compliant Packaging, Labeling & Preservation ServicesThe contract requires the provision of military-compliant packaging, labeling, and preservation services for defense shipments, adhering strictly to MIL-STD-129 and DLA RP001 standards. All materials and processes must ensure corrosion protection and full regulatory compliance for use in military logistics, with an emphasis on durability, traceability, and environmental resilience under operational conditions. The work involves end-to-end preparation of items for shipment, including proper identification, marking, and preservation techniques to safeguard equipment and supplies from degradation during storage and transit. This subcontract opportunity is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and a posting date of July 21, 2026. The NAICS code 332999 indicates it falls under other miscellaneous fabricated metal product manufacturing, suggesting the work may involve custom packaging solutions or specialized container fabrication. The place of performance and specific delivery locations are not detailed, but fulfillment is expected to support military supply chain operations globally. Interested parties must submit proposals before the deadline to be considered for award under this unspecified set-aside solicitation.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.
Other Measuring and Controlling Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, PRESSURThe contract specifies the procurement of a pressure transmitter identified by part number 2600331-1 and NSN 6685011136087, with a requirement for two units to be delivered within 115 days to Barstow, California, under solicitation SPE4A6-26-T-08LN. The item is source-controlled and must be manufactured and tested in accordance with limited rights data held by approved sources, primarily Senso-Metrics Inc. and Soco Technologies Inc., with no government-provided technical data; only vendors with access to this data or proven traceability to approved sources may quote. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, adopting zero non-conformances unless otherwise directed. Specific clauses mandate that critical attributes be verified at Level VII, major at IV, and minor at II with corresponding AQLs, while unspecified attributes are treated as major. The item is designated as a critical application component and must comply with drawing 2600331 Revision E dated June 15, 2012, with certain test requirements from specification 2600380 Rev B waived and soldering procedures left to manufacturer discretion. Packaging must adhere to DLA-specific standards per RP001 and MIL-STD-129, with hazardous materials following TQ Requirement IP025 per FED-STD-313 and nonhazardous materials conforming to ASTM D3951, ensuring DLA requirements override all other standards. Item markings must comply with RQ017 for physical identification, and all packaging must be palletized per DLA guidelines. The contract imposes Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment obligations and mandates Source Approval Request (SAR) documentation for any vendor seeking source approval. Delivery is FOB origin with zero quantity variance, inspected and accepted at destination. The unit of issue is each, priced at $2.00 per unit for a total value of $4.00, with delivery directed to the DLA Distribution Office in Barstow. The item is subject to strict compliance with documentation, cybersecurity, quality, and packaging mandates, and all contractual obligations take precedence over industry defaults.
Other Measuring and Controlling Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE EXTThe contract specifies the procurement of tube assemblies for a fire extinguishing system, with two approved part numbers from KIDDE TECHNOLOGIES INC: P/N 423117 and P/N 432117, classified as critical application items. The item is identified by NSN 4210-01-643-8401, with a quantity of six units, each to be delivered as a single unit of issue. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RC001 for source approval documentation, RP001 for packaging standards, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs per critical, major, or minor classifications. Packaging must meet MIL-STD-2073-1E with specific preservation methods, and marking must comply with MIL-STD-129 without special codes. Palletization follows DLA packaging requirements. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The required delivery date is January 17, 2028, with a lead time of 171 days, and shipment must be sent to the DLA Distribution Albany facility in Albany, Georgia. The contract was solicited under SPE4A6-26-T-08EA with a response deadline of July 29, 2026, and the purchasing agency is the Department of Defense, ASC Commodities Division.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLINDRThis solicitation is for a cylindrical roller bearing, part number 59637, with NSN 3110003853504, requiring five units for delivery within 305 days FOB origin. The item is source controlled and must be manufactured and tested in strict compliance with limited rights data held by approved sources—Parker Hannifin and Regal Beloit America, Inc.—with no government provision of the technical data. Only vendors with direct access to this data or traceability to the approved sources may submit quotes. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, with more than 50 percent of the total cost of all components—rolling elements, retainer, inner and outer race—originating from these regions. A signed Contractor’s Declaration regarding domestic content is mandatory and must be submitted upon request; failure to provide it will disqualify the quote. Inspection and acceptance occur at the origin, and no unit identification is required under DFARS 252.211-7003(c)(1)(i). Packaging must fully comply with MIL-STD-2073-1E, MIL-DTL-197M, and DLA packaging requirements, including preservation methods tailored to bearing type and closure, with all marking conforming to MIL-STD-129. The item is designated as critical application and has no shelf life. All measures, testing equipment, and quality controls must meet the DLA Master List of Technical and Quality Requirements, and the entire procurement is subject to restrictions outlined in DFARS 252.225-7016. If no compliant offers are received, the solicitation may be canceled or held pending a waiver.
Ball and Roller Bearing Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
PANEL, INDICATING, LIGHTThe contract specifies the procurement of five units of a light-transmitting indicating panel, identified by NSN 6220-01-509-3310 and part number 74J808070-823, with delivery required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must conform to rigorous technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, with verification levels and sampling methods strictly defined per MIL-STD-1916 or comparable zero-based sampling plans; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Manufacturing and packaging adherence is mandated under DLA Packaging Requirements and MIL-STD-2073-1E, with packaging coded as U, using E5 unit containers and no cushioning material. All items must be marked per MIL-STD-129 with the special fragile code 01-01, and palletization must comply with DLA guidelines. The supplier must maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance and remove government identification from non-accepted supplies. The delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and the contract requires adherence to specific transportation protocols per DLAD Proc Notes C19 and C20. The original required delivery date is December 18, 2027, with a need ship date of January 17, 2027, under solicitation SPE4A6-26-T-08CN, issued by the Department of Defense’s ASC Commodities Division.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 213113
New
DIBBS
BEARING, SLEEVEThe contract pertains to the procurement of a sleeve bearing with NSN 3120-01-286-0906, quantity of four units, under solicitation SPE4A6-26-T-08MV. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Inspection and acceptance occur at origin using sampling methods aligned with MIL-STD-1916 or ASQ H1331, Table 1, or a zero-based plan; critical, major, and minor attributes are verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item is designated as a critical application requiring casting or forging, with tooling typically held by the manufacturer, and sourcing assistance must be requested through DLA’s designated channels. Only approved sources are KAMATICS CORPORATION and ROLLER BEARING COMPANY OF AMERICA, each with specific part numbers. Item Unique Identification is not required per the Service customer’s request. Delivery is FOB origin with a 171-day lead time, final delivery due by April 20, 2027, and shipment must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging and palletization adhere strictly to DLA’s procurement standards, and all documentation must support source approval and manufacturing compliance.
Support Activities for Coal Mining

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract specifies the procurement of a light indicator component with NSN 6210011737858 under solicitation SPE4A6-26-T-08UD, requiring delivery of three units at one each to the USS FRANK E PETERSEN JR DDG 121 at FPO AP 96691 by June 25, 2026, with a 20-day delivery window and FOB destination terms. Strict compliance with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129 is mandated, including fragile labeling and prohibition of mercury or mercury compounds in preservation, packaging, or marking. The item is classified as a critical application with bare part marking requirements for DRS NAVAL POWER SYSTEMS INC P/N 6981ED166-535, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revisions controlled by the solicitation or amendment date. No shelf life applies, and quantity variance is strictly zero percent. Shipping and transportation follow DLAD procedural notes C19 and C20, with vendors required to use VSM for logistics. The contract enforces zero tolerance for mercury exposure and mandates compliance with verified sampling levels and packaging codes for unit containment and protection.
Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAININGThe contract covers the procurement of 1,585 retaining rings with NSN 5325-00-169-8023 under solicitation SPE4A6-26-T-08HH, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revision control based on solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must bear physical identification per bare item marking requirements. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Item Unique Identification is not required per customer request. Tailored quality requirements apply to both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, with DFARS 252.225-7048 enforcing compliance. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The place of performance is New Cumberland, PA, and the point of contact is Monica Clark of the ASC Commodities Division, Department of Defense.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, IMPELLER, LEFT HANDThe contract specifies the procurement of two left-hand impeller nuts, identified by NSN 5310-01-424-5905 and part number 15-0125-01, manufactured by Buffalo Pumps Inc. and supplied under solicitation SPE4A6-26-T-08ST. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Sampling follows MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical attributes require zero non-conformances, and unspecified attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited in the item, its preservation, packaging, or marking, except for specified functional uses in instrumentation or batteries, which must include secondary containment per NAVSEA 5100-003D. Preservation is to be conducted in accordance with ASTM D3951 using preservation method code 10. Delivery is FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. The delivery window is 171 days from contract award, with a required ship date of January 17, 2027, and the original delivery deadline was October 30, 2026. All logistics and transportation protocols follow DLA procedural notes C19 and C20, and the unit of issue is each (EA) at a unit price of $2.00, totaling $4.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details