Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Fire Protection & Life Safety System Installation

Active

Federal

Response Deadline08/04/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the installation or upgrade of fire sprinkler systems, fire alarms, smoke detectors, and emergency egress lighting to ensure compliance with NFPA 101 and the International Building Code for occupancy certification. The work must be performed to meet stringent life safety standards, with all systems designed and installed to provide reliable protection and clear egress pathways in the event of an emergency. The project is specifically scoped for the Salina location and falls under NAICS code 238220, indicating it is a subcontract for fire protection system installation services within the construction industry. The contract was posted on July 28, 2026, and responses are due by August 4, 2026, at 9:00 PM. It is issued under the Department of Defense through the W071 Endist Kansas City agency, with no set-aside classification specified. The contract does not include detailed point-of-contact information or a specific office address, but performance must occur at the designated location in Salina. All work must be completed to satisfy regulatory requirements for occupancy certification, making adherence to NFPA and IBC standards critical for acceptance and approval.

General Info

Install fire sprinklers, alarms, smoke detectors, and egress lighting in Salina to meet NFPA 101 and IBC for occupancy certification.

Agency

Department Of Defense → W071 Endist Kansas CityView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Salina, KS, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 09:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W071 Endist Kansas City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W071 Endist Kansas City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation or upgrade of fire sprinkler systems, fire alarms, smoke detectors, and emergency egress lighting to meet NFPA 101 and IBC requirements for occupancy certification.

Similar Contracts

Same NAICS industry code

HVAC System InstallationThe contract calls for the installation of a comprehensive heating, ventilation, and air conditioning system including all associated ductwork and control components at Fort Stewart, Georgia, under the NAICS code 238220 for HVAC installation. The work is structured as a subcontract and is being managed by the Department of Defense through its W074 Endist Savannah office, with the performance location specified at the Fort Stewart military installation. All work must be completed in accordance with military standards and facility requirements, though specific technical specifications are not listed in the provided data. The solicitation was posted on July 29, 2026, and responses are due by August 6, 2026, at 4:00 PM Eastern Time. The contract does not indicate any set-aside status for small businesses or other categories, and no point of contact information is provided in the solicitation details. Prospective subcontractors must ensure compliance with all federal guidelines and DoD procurement regulations, and should verify technical requirements through direct engagement with the contracting office prior to submitting a proposal. The official solicitation page is accessible via the provided Sam.gov link for further details.

W074 Endist Savannah

POSTED

about 6 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract pertains to the installation of domestic water, waste, vent, and medical gas piping systems at Fort Stewart, Georgia, under the NAICS code 238220 for plumbing, heating, and air-conditioning contractors. It is structured as a subcontract and is issued by the Department of Defense through the W074 Endist Savannah office, with a response deadline of August 6, 2026, at 4:00 PM. The work is specifically required at the Fort Stewart location, where the systems must meet all applicable technical, safety, and regulatory standards for both conventional and medical-grade piping. All installations are expected to be completed in accordance with the project’s engineering specifications and must ensure full functionality and compliance with health and safety codes for a military installation.

W074 Endist Savannah

POSTED

about 6 hours ago

DEADLINE

AS4108 Oil Filtration Cart PowerOnly Mechanical MACC Contractors listed on the General Requirements cover page are eligible to submit proposals for this solicitation, N4008526R9070, which is a Small Business Set-Aside under NAICS code 238220 for Oil Filtration Cart Power work at Camp Lejeune, North Carolina. The contract is managed by the Naval Facilities Engineering Systems Command Mid-Atlantic out of Norfolk, Virginia, with Ashley Ruiz and Lauren Loconto as the primary and secondary points of contact. Proposals must be submitted via SAM.gov by the deadline of August 19, 2026, and include all referenced attachments, such as environmental management policies, spill and inspection forms, and initial AUL build documentation. The work involves technical deliverables aligned with Beneficial Occupancy Dates, including phased GIS data collection, digital and hardcopy maps, red-line construction drawings, and compliance with the SDSFIE Schema and FAR 52.236-21 submittal procedures. All work must adhere to strict safety and environmental standards, including EM 385-1-1, OSHA, and EPA regulations, with testing conducted by accredited laboratories meeting NVLAP, AASHTO, or A2LA criteria. The contractor must submit a Quality Control Plan within 15 days of award and ensure all personnel, including the Superintendent, SSHO, Confined Space Competent Person, and Industrial Hygienist, meet specific experience and certification requirements. Invoicing must be done through WAWF with a maximum file size of 2 MB per attachment, and all documents uploaded to eCMS must be marked as unclassified or CUI with no PII permitted. Delivery and performance occur exclusively at Camp Lejeune, with surplus soil routed to a designated on-base location. While no contract value is disclosed, the solicitation is a total small business set-aside with no socioeconomic certifications required from offerors beyond confirming small business status. Key personnel must be identified within 20 days of award, and failure to comply with reporting obligations may result in payment withholding of up to 10%. The contract references multiple FAR clauses related to small business subcontracting, submittals, inspections, and quality assurance, but omits explicit details on packaging, marking, preservation, FOB terms, evaluation factors, or award methodology.

Navfacsyscom Mid-Atlantic

POSTED

about 6 hours ago

DEADLINE

FCC Pollock Upgrade Complex HVAC Control Systems Project 26Z5AY1The Federal Bureau of Prisons is seeking market input for a planned firm-fixed-price construction contract to upgrade the complex HVAC control systems at the Federal Correctional Complex Pollock in Louisiana. The project, which involves designing, building, and installing a comprehensive Building Automation System, is estimated to range between $1 million and $5 million and falls under NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors. This notice is strictly for market research and is not a solicitation; no proposals or qualification documents are being requested at this time. Interested small business contractors must be currently registered in SAM.gov with accurate size status information meeting the $19 million average annual receipts threshold and must self-certify any applicable socioeconomic status such as WO, 8(a), HUBZone, or SDVOB. To express interest, vendors must add their names to the Interested Vendors List on SAM.gov and complete the attached Market Research Questionnaire, which should be returned to kbillington@bop.gov. Access to future solicitation documents will require an active SAM.gov registration, a valid MPIN, and approval to access controlled files. The anticipated synopsis will be posted at a later date, and all interested parties are advised to monitor SAM.gov for updates. Only prime contractors may respond; subcontracting arrangements are the responsibility of the selected prime and are not under the purview of the Federal Bureau of Prisons.

POSTED

about 6 hours ago

DEADLINE

Repair Building 510 HVACThe contract titled Repair Building 510 HVAC is a special notice issued by the Department of Defense through the 94th Contracting Flight at Dobbins Air Reserve Base in Georgia, with a NAICS code of 238220 indicating it falls under HVAC contracting services. The solicitation number is FA670326Q0002_1, posted on July 29, 2026, with a response deadline of August 12, 2026, at 6:00 PM Eastern Time. Performance of the work is designated for Marietta, Georgia, specifically at the location with ZIP code 30069. The primary point of contact is Kevin Song, reachable at 678-655-3695 or kevin.song@us.af.mil, with Kenneth Jacob listed as the secondary contact at 678-655-5745 or kenneth.jacob.1@us.af.mil. A site visit is required for prospective bidders to fully understand the scope and conditions of the work, and all interested parties must attend to be eligible for consideration. The contract opportunity can be accessed via the provided SAM.gov link for additional submission details and documentation.

FA6703 94TH Contracting Flight Pk

POSTED

about 6 hours ago

DEADLINE

Abington - Beaver Brook Boiler ReplacementThe Abington Public School District is soliciting sealed bids for the complete replacement of the boiler system at Beaver Brook Elementary School, with all bid documents available for request via email starting July 29, 2026. The contract, designated as BD-27-1472-SCHLS-SCHLS-131658, requires qualified contractors to furnish and install a new heating system, with submissions due by 3:00 PM on August 19, 2026. Bids must be opened publicly at 10:00 AM on the same day at the Frolio School Building located at 1071 Washington Street in Abington, Massachusetts. All work is to be performed at the school’s location, and the procurement is managed by the Massachusetts School Department under the lead of Purchaser Sarah Gainey. The solicitation is open to all qualified contractors without set-aside restrictions and is issued under a state and local education agency framework. Interested parties can access full details through the official Commbuys portal using the provided link. The project aims to upgrade the school’s infrastructure with an efficient, modern boiler system to ensure consistent heating and safety for students and staff, and all submissions must comply with the specifications outlined in the bid documents requested after July 29, 2026.

SCHLS - Abington School Department

POSTED

about 13 hours ago

DEADLINE

Chiller Replacement at Coolidge Corner LibraryThe contract involves the replacement of a chiller system at the Coolidge Corner Library in Brookline, Massachusetts, solicited under reference number BD-25-1250-1560-1560-131732. Bid documents will be accessible starting July 29, 2026, through the Biddocs portal, with responses due by August 12, 2026, at 9:00 PM Eastern Time. The procurement is managed by the Massachusetts Department of Purchasing, under the SLED classification, and is limited to entities performing work at the specified library location in Brookline with a ZIP code of 02445. Richard Saville is designated as the primary point of contact for this solicitation, and all inquiries should be directed through the provided official channels. The contract type is a standard solicitation without any specified set-aside provisions, and interested parties must access the complete bid details via the CommBuys platform.

1560 - Purchasing

POSTED

about 13 hours ago

DEADLINE

Mechanical Systems InstallationThe contract involves the installation of HVAC, plumbing, and process piping systems in accordance with approved project drawings and all applicable codes and standards. The work is classified under NAICS code 238220 and is structured as a subcontract, indicating it is part of a larger construction or facility project managed by a prime contractor. The opportunity was posted on July 28, 2026, with a response deadline set for September 10, 2026, giving potential bidders approximately six weeks to prepare and submit their proposals. The contracting entity is the State of Utah, though specific location details for the place of performance are not provided, suggesting the work may occur at one or more sites within the state. All installations must comply with current regulatory requirements and technical specifications to ensure system functionality, safety, and code adherence.

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Mechanical Systems InstallationThe contract titled Mechanical Systems Installation involves the comprehensive installation of HVAC systems, ductwork, piping, and associated mechanical equipment, requiring close coordination among multiple trades to ensure seamless integration and operational efficiency. The work is structured as a subcontract and falls under the NAICS code 238220, which classifies it within the HVAC and mechanical contracting sector. Performance of the work is expected to occur within the state of Utah, though specific site details are not provided, and all activities must adhere to industry standards for safety, quality, and timeliness. The solicitation was posted on July 28, 2026, with a deadline for responses set for August 24, 2026, providing interested parties approximately four weeks to prepare and submit their proposals. The contract is administered by the Utah agency, with no set-aside provisions designated, meaning it is open to all eligible contractors regardless of size or ownership structure. Detailed technical specifications, scope requirements, and performance metrics are expected to be outlined in the full solicitation available through the provided Utah Bonfire Hub link. Contractors must demonstrate proven experience in mechanical system installations, ability to coordinate with other construction trades, and compliance with state and local building codes.

POSTED

about 21 hours ago

DEADLINE

Mechanical, Plumbing, and HVAC InstallationThe contract involves the installation of mechanical, plumbing, and HVAC systems, including all associated components such as piping, ductwork, refrigerant lines, and the integration of these systems with the building’s existing infrastructure. Work scope encompasses full system fabrication, routing, connection, and commissioning to ensure operational compatibility and compliance with building codes and performance standards. The contract is structured as a subcontract with a NAICS code of 238220, indicating it falls under plumbing, heating, and air-conditioning contractors. It is issued by the state of Utah under the agency name Utah, with the response deadline set for September 1, 2026, and the solicitation posted on July 28, 2026. The place of performance and point of contact details are not specified, and no set-aside classifications are indicated.Interested parties must submit proposals through the provided Utah Bonfire Hub link before the deadline.

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Rooftop Unit (RTU) Installation and Mechanical IntegrationCobb County Board of Education is seeking a subcontractor to supply and install new rooftop HVAC units, with full integration into the existing ductwork and building control systems. The work requires technical expertise to ensure seamless compatibility with current mechanical infrastructure, including proper sizing, mounting, electrical connections, and seamless communication with existing automated climate controls. The contract falls under NAICS code 238220 for plumbing, heating, and air-conditioning contractors and is classified as a subcontract opportunity with a response deadline of September 2, 2026. The project is located within Georgia and is part of the agency’s broader initiative to modernize facility systems for improved energy efficiency and occupant comfort. Bidders must be prepared to coordinate closely with facility personnel and adhere to all applicable building and safety codes during execution.

Cobb County Board of Education

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Pump Station Construction (x2)The contract involves the design and construction of two pump stations, encompassing all phases from wet well excavation through structural completion, mechanical equipment installation, and full electrical system integration. The work requires precise coordination of civil, mechanical, and electrical components to ensure operational readiness and compliance with engineering standards. All tasks must be executed to meet the specifications for performance, safety, and durability under expected environmental and operational conditions. The solicitation is classified as a subcontract with a NAICS code of 238220, indicating specialized construction services for plumbing, heating, and air conditioning systems. It is managed by the River Valley Regional Commission in Georgia and has a response deadline of September 3, 2026, with the posting date listed as July 28, 2026. The place of performance and exact location details are not specified, and no set-aside provisions or point of contact information are provided. Interested parties must review the full solicitation through the provided official link to access detailed technical requirements and submission guidelines.

River Valley Regional Commission

POSTED

about 23 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → W071 Endist Kansas City

Same awarding agency

General Construction Management and Build-OutThis contract is for general construction management and build-out services under a subcontract arrangement, focusing on comprehensive oversight of construction activities to ensure timely completion, proper trade coordination, adherence to building codes, and successful acquisition of the Certificate of Occupancy. The work is tied to a specific location identified by the ZIP code 72660, and performance is governed under NAICS code 236220, which corresponds to commercial and institutional building construction. The solicitation was posted on July 28, 2026, with a response deadline of August 4, 2026, and is procured by the Department of Defense through its W071 Endist Kansas City office, indicating federal military or defense-related infrastructure involvement. The contract requires a high level of organization and compliance to meet federal construction standards and ensure seamless execution across all phases of the project.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Signage and Wayfinding InstallationThe contract involves the installation of interior signage using USACE-provided EPS files, requiring the fabrication and mounting of unit IDs, room labels, and directional signs using durable, long-lasting materials suitable for high-traffic environments. All signage must be installed precisely according to the provided digital files to ensure consistency, legibility, and compliance with military facility standards. The work is scoped to occur at a location with the ZIP code 72660, and materials must meet durability requirements to withstand daily use and environmental conditions within the facility. This is a subcontract solicitation under NAICS code 339950, posted on July 28, 2026, with a response deadline of August 4, 2026, at 9:00 PM. It is administered by the Department of Defense through the W071 Endist Kansas City office, and performance must align with federal contracting protocols. Bidders are expected to have the capability to interpret technical design files, source appropriate signage materials, and execute professional installations without disruption to ongoing operations. There are no set-asides specified for this procurement.

Sign Manufacturing

POSTED

DEADLINE

Low-Voltage and Security Systems InstallationThe contract involves the installation of low-voltage and security systems including CCTV, Aiphone intercoms, fire safety systems, and color-coded cabling, all aligned with federal security and life safety standards. The work must be executed to meet stringent regulatory requirements ensuring compliance with national codes for surveillance, communication, and emergency response infrastructure. The project is structured as a subcontract under the Department of Defense, specifically managed by W071 Endist Kansas City, with the place of performance located in the 72660 zip code area. All systems must be integrated and documented to support long-term operational reliability and inspection readiness. Responses are due by August 4, 2026, at 9:00 PM, following the posting date of July 28, 2026. The North American Industry Classification System code for this opportunity is 238210, which corresponds to electrical contracting services. There is no specified set-aside or small business designation, and the contract is open to qualified subcontractors capable of delivering federal-compliant security and life safety systems. The procurement is managed through the SAM.gov platform, and bidders are expected to demonstrate technical expertise, regulatory knowledge, and proven experience in similar defense-related installations.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Interior Finishes InstallationThe contract titled Interior Finishes Installation requires the installation of flooring, wall treatments, and ceiling tiles that meet specific acoustic performance standards with a Noise Reduction Coefficient of at least 0.65 and comply with low-VOC material requirements to ensure indoor air quality. The work is scoped under NAICS code 238350 for finish carpentry and is structured as a subcontract opportunity. The solicitation was posted on July 28, 2026, with a response deadline of August 4, 2026, at 9:00 PM. Performance is expected to occur in the area associated with ZIP code 72660, under the oversight of the Department of Defense through the W071 Endist Kansas City office. All materials and installations must adhere strictly to the specified technical criteria without exception.

Finish Carpentry Contractors

POSTED

DEADLINE

MEP (Mechanical, Electrical, Plumbing) InstallationThe contract entails the installation of mechanical, electrical, and plumbing systems in compliance with ASHRAE 90.1, NFPA 101, and IBC standards, ensuring energy efficiency, fire safety, and structural integrity throughout the project. This subcontract is categorized under NAICS code 238220 and is associated with the Department of Defense through its agency name W071 Endist Kansas City, indicating a federal defense-related initiative. The work must be performed at a location identified by the postal code 72660, though specific city or state details are not provided, and all systems must be designed and installed to meet rigorous national codes and industry best practices. The solicitation was posted on July 28, 2026, with a strict response deadline of August 4, 2026, at 9:00 PM, leaving potential bidders a limited window to prepare and submit proposals. There is no specified set-aside type, suggesting the opportunity is open to all eligible contractors without preference for small businesses, veteran-owned firms, or other categories. The contract does not include a point of contact, requiring interested parties to rely on the provided SAM.gov link for further details and submission instructions. The focus remains on fully integrated MEP systems delivered to federal specifications, emphasizing regulatory adherence and operational reliability.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Architectural and Engineering (A/E) Design ServicesThe contract calls for comprehensive architectural and engineering design services to support the interior build-out of a U.S. Army recruiting facility, requiring full development of construction documents and strict adherence to all applicable federal codes and standards. The scope encompasses all design phases necessary to translate functional requirements into compliant, buildable plans, ensuring the facility meets the operational and safety needs of the Army’s recruiting mission. The work must align with federal procurement regulations and be executed to support timely construction without delays due to design deficiencies or noncompliance. The opportunity is posted as a subcontract under NAICS code 541310 and is managed by the Department of Defense through the W071 Endist Kansas City office. Responses are due by August 4, 2026, with the performance location identified by ZIP code 72660. The contract does not specify a set-aside type, and while no point of contact is listed, the solicitation is accessible through the official SAM.gov portal. All proposers must ensure their submission addresses the technical, regulatory, and logistical requirements associated with delivering federal government facility design services.

Architectural Services

POSTED

DEADLINE

Security System Installation (Access Control & Surveillance)The contract involves the installation of electronic access control systems, surveillance cameras, and intrusion detection systems to meet federal security standards, including PIV and FIPS requirements. The work is being conducted as a subcontract under the Department of Defense, specifically managed by W071 Endist Kansas City, with performance taking place in Salina. All equipment and implementation must fully comply with stringent federal cybersecurity and physical security protocols to ensure secure identity verification and data protection. The solicitation was posted on July 28, 2026, with responses due by August 4, 2026, and the North American Industry Classification System code 334220 applies to the manufacture of communications equipment, indicating the technical nature of the hardware involved.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Building Code Compliance & Fire Safety EngineeringThe contract pertains to engineering review and certification of fire protection and life safety systems for a project located in Salina, requiring expert analysis to ensure full compliance with applicable building codes. The scope includes preparing detailed compliance reports in the event that the Certificate of Occupancy is delayed, ensuring timely resolution of regulatory hurdles. This subcontract is classified under NAICS code 541330, indicating it involves architectural and engineering services, and is sponsored by the Department of Defense through the W071 Endist Kansas City office. The solicitation was posted on July 28, 2026, with a firm deadline for responses on August 4, 2026, at 9:00 PM, limiting the window for submissions to just over one week. Performance is localized to Salina, and while no set-aside designation is specified, the nature of the work demands specialized technical expertise in fire safety engineering and code interpretation.

Engineering Services

POSTED

DEADLINE

Janitorial & Facility Maintenance ServicesThe contract is for ongoing janitorial and facility maintenance services at government facilities in Salina, requiring adherence to GSA standards. Services include daily cleaning, waste removal, restroom maintenance, and comprehensive custodial support to ensure hygiene, safety, and operational readiness of leased federal properties. The work is classified under NAICS code 561720 and structured as a subcontract, with responses due by August 4, 2026. The contracting entity is the Department of Defense through its W071 Endist Kansas City office, and performance is localized to the Salina area, with no specified set-aside preferences or additional organizational details provided.

Janitorial Services

POSTED

DEADLINE

Electrical & Telecommunications InfrastructureThe contract pertains to the installation of electrical systems and structured cabling for data and voice communications to support IT and telecommunications requirements within leased government facilities managed by the Department of Defense under the W071 Endist Kansas City office. The work is focused on the city of Salina and involves providing infrastructure that ensures reliable power delivery and high-performance network connectivity for operational technology and communication systems. This subcontract is classified under NAICS code 238210, which corresponds to electrical contracting services, and is intended to fulfill specific technical needs associated with federal facility operations. Bid responses are due by August 4, 2026, with the solicitation posted on July 28, 2026. The contract does not specify a set-aside designation or additional details regarding the contracting office’s physical address or point of contact. All performance must occur at the designated government-leased locations in Salina, and the successful contractor will be responsible for executing the full scope of electrical and cabling installations compliant with federal standards and agency specifications. The opportunity is accessible via the SAM.gov portal for interested subcontractors.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Tenant Improvement Construction (Interior Build-Out)The contract involves a full interior build-out of leased government space to be completed in Salina, requiring comprehensive construction of walls, ceilings, flooring, lighting, doors, and all necessary accessibility-compliant features in strict accordance with approved design drawings and U.S. Army Corps of Engineers standards. This is a subcontract under NAICS code 238310 for tenant improvement construction, with bids due by August 4, 2026, and the work must meet all federal requirements for functionality, safety, and accessibility. The project is managed by the Department of Defense through its W071 Endist Kansas City office, and performance is limited to the specified location in Salina without additional geographic flexibility.

Drywall and Insulation Contractors

POSTED

DEADLINE

As-Built Drawings and CAD DocumentationThe contract requires the preparation and submission of as-built drawings in clean, purged .DWG format following the completion of construction at a federal facility, specifically for documentation purposes under the Department of Defense. The work must adhere to precise technical standards to ensure the final deliverables are accurate, uncluttered, and fully compliant with federal CAD documentation requirements. The North American Industry Classification System code 541370 indicates this is a specialized architectural and engineering service, and the contract is classified as a subcontract, meaning it is part of a larger procurement effort managed by the W071 Endist Kansas City office. The solicitation was posted on July 28, 2026, with a response deadline of August 4, 2026, at 9:00 PM Eastern Time, allowing vendors a limited window to submit proposals. The place of performance is identified as location 7100, though the specific city, state, or ZIP code is not provided, suggesting the work may be tied to a DoD installation or facility with an internal designation. The absence of a point of contact or set-aside details implies the contracting activity is not restricted to specific small business categories and may be open to any qualified subcontractor capable of delivering compliant as-built documentation. All deliverables must be submitted in a fully purged AutoCAD format, ensuring no extraneous data remains that could compromise data integrity or security in federal records.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE