Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Fire Protection Equipment Supplier

Active

State & Local

Response Deadline10/01/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Fire Protection Equipment Supplier subcontract involves providing essential fire protection hardware for prime contractors working on Town of Holden Department of Public Works facility projects. The scope of work requires the sourcing and delivery of one dry pipe valve and one oil-lubricated baseplate fire protection compressor to the project site located on Industrial Drive in Holden, Massachusetts. All supplied equipment must be UL listed or FM approved to ensure compliance with safety standards. This opportunity was posted on September 17, 2026, with a response deadline of October 1, 2026. The contract falls under NAICS code 423490 and is managed by the Massachusetts Department of Public Works.

General Info

Supply UL/FM fire protection equipment for Town of Holden DPW facility projects.

Agency

Massachusetts → DPW06 - Holden Department of Public WorksView Agency

NAICS

423490 - Other Professional Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

Industrial Drive Holden, MA, 01520, USA

Set-Aside

NONE

Documents

This scope was carved out of BD-25-1281-DPW06-DPW06-133596.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Senior Center Sprinkler Valve and Compressor

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 17

subcontract

Response DeadlineOct 1

Submission deadline

Response Deadline

10/01/2026, 03:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → DPW06 - Holden Department of Public Works

ContactsNo contacts available

OfficeN/A

Organization / Agency

Massachusetts → DPW06 - Holden Department of Public Works

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies fire protection hardware for prime contractors on Town of Holden Department of Public Works facility projects. Sources and delivers one oil-lubricated baseplate fire protection compressor and one dry pipe valve. Equipment must be UL listed or FM approved. Delivers the specified compressor and valve to the project site.

Similar Contracts

Same NAICS industry code

LIPTM00395 - MULTI-MEDIA IPT - TPL 24-067/068 - NASA SEWP (C)The LIPTM00395 Multi-Media IPT contract, identified as TPL 24-067/068, focuses on the procurement of non-Cisco gear via the NASA SEWP vehicle. This forecast is managed by the Naval Information Warfare Systems Command, specifically Niwc Atlantic, with the primary place of performance located in North Charleston. Classified under NAICS code 423490, the acquisition is overseen by Contracting Officer Christopher M. Brown and Secondary Point of Contact Tyler Rio. The project is scheduled for a posted date of September 20, 2026, as part of the agency's long range acquisition planning.

POSTED

DEADLINE

Acoustic Emission Testing Equipment SupplierThis subcontract involves the supply of a complete Acoustic Emission Testing Equipment system for prime contractors working on CDC/NIOSH projects. The scope of work includes the delivery of a Micro-SHM-4-WIFI Four AE Channel Node and an Indoor AC Power Injector to Pittsburgh, Pennsylvania. The supplier is responsible for ensuring full system compatibility, providing necessary software licenses, and offering commercial warranties. The agreement is managed by the CDC Office of Acquisition Services under the Department of Health and Human Services. All deliverables must comply with Buy American requirements and Section 508 accessibility standards. The contract is categorized under NAICS code 423490.

CDC Office Of Acquisition Services

POSTED

DEADLINE

Winter Emergency Gear SupplierThe Winter Emergency Gear Supplier subcontract, managed by the District of Columbia Administrative Hearings office, involves the procurement and delivery of essential warming and vehicle maintenance equipment for prime contractors supporting Serve DC emergency preparedness projects. The scope of work specifically requires the provision of HotHands Hand Warmers in 36 pair boxes and steel beveled edge ice scrapers featuring 7 inch blades. The supplier is responsible for the complete shipment and delivery of these items to a designated facility within the District of Columbia. This opportunity falls under NAICS code 423490 and was posted on September 18, 2026, with a response deadline of September 22, 2026.

Administrative Hearings (OAH)

POSTED

DEADLINE

Bioanalytical Research Consumables SupplyThe Bioanalytical Research Consumables Supply subcontract, managed by the Department of Veterans Affairs Network Contracting Office 1, focuses on the provision of specialized reagents, assay kits, and laboratory consumables. These materials, including high-purity reagents, chemical standards, sample collection tubes, and storage vials, are essential for pharmacological research conducted by prime contractors. To ensure quality and compliance, all laboratory supplies must meet ISO certification standards. The contract falls under NAICS code 423490 and was posted on September 18, 2026, with a response deadline of September 22, 2026.

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

in about 23 hours

Supply of Camfil and PAMIC Air FiltersThis subcontract involves the supply of industrial air filters for prime contractors operating on projects at the Marine Corps Logistics Base Albany. The scope of work includes the sourcing and delivery of specific filtration units, including PAMIC Filters and Camfil models such as FLTR-GS-GR-325 and FLTR-GS-XG-325, to designated locations in Albany, Georgia, and Camp Lejeune, North Carolina. The contract is managed under the Department of Defense and requires strict adherence to the Buy American Act and the Prohibition of Hexavalent Chromium standards. All deliverables must meet the specified part numbers and quantities to ensure compliance with the technical requirements of the agency.

POSTED

DEADLINE

Furniture Preservation and Packaging MaterialsThis small business set-aside subcontract is for the provision of furniture preservation and packaging materials to support prime contractors on FA3016 502 Cons Cl projects at JBSA Fort Sam Houston. The scope of work includes the delivery of cleaning cloths, wipes, protective furniture covers, and heavy-duty plastic bags for hardware with a minimum thickness of 4-mil. The contract falls under NAICS code 423490 and is managed by the Department of Defense. All supplied materials must strictly adhere to the Buy American and Balance of Payments Program requirements. Interested parties must respond by September 21, 2026.

FA3016 502 Cons Cl

POSTED

DEADLINE

in about 2 hours

Supply of YSI Multiparameter Sonde Systems and SensorsThis subcontract opportunity, posted by the Department of Defense for the W2R2 Cold Regions Research Engineering Laboratory, involves the supply of YSI multiparameter water meters and sensors for prime contractors working on USACE Engineer Research and Development Center projects. The scope specifically requires the provision of EXO 3 and EXO 1 Sonde Systems, which must include optical DO sensors, central wipers, and wiped conductivity and temperature sensors. All deliveries are to be made FOB Destination to Vicksburg, Mississippi. To be eligible, providers must hold authorized YSI distributor status and ensure full compliance with DFARS 252.211-7003 regarding unique item identification. This is a total Small Business Set Aside under NAICS code 423490. Interested parties must submit their responses by the deadline of September 24, 2026.

W2R2 Cold Rgns Rsch Engineering Labor

POSTED

DEADLINE

Supply of STERIS AMSCO Replacement Parts and ComponentsThis subcontract through the Defense Health Agency involves the supply of genuine OEM replacement parts, subassemblies, and components for prime contractors supporting 6th Medical Group projects at MacDill AFB in Tampa, Florida. The scope specifically focuses on providing hardware for STERIS AMSCO 400 Series 20 Sterilizers and AMSCO 2532 Washers, with all items required to meet OEM specifications and comply with FAR 2.101 Unique Item Identifier requirements. The opportunity is categorized under NAICS code 423490 and was posted on September 18, 2026, with a response deadline of September 25, 2026. The selected provider will be responsible for the delivery of all specified hardware and parts directly to MacDill AFB.

Defense Health Agency

POSTED

DEADLINE

PO-EN27474052 - Leica Total Station Equipment and High Precision Receiver

Solicitation # 234182

The Ministry of Forests for the Province of British Columbia is issuing a presolicitation for the procurement of Leica Total Station Equipment and High Precision Receivers under contract PO-EN27474052. This opportunity, identified by solicitation number 234182, is intended for performance within British Columbia. The notice was posted on September 17, 2026, with a response deadline set for September 24, 2026. Interested parties can find further details and submission guidelines through the BC Bid portal.

Ministry of Forests

POSTED

DEADLINE

Supply of NSN 5330011235650This subcontract involves the supply of material item NSN 5330011235650 for prime contractors supporting Department of Defense supply contracts under the Land Supplier Opns Vehicle Spt agency. The selected provider must source items according to the DLA Master List of Technical and Quality Requirements and adhere to MIL-STD-129 for marking and storage. Additionally, the contractor is responsible for hazardous material labeling in compliance with 29 CFR 1910.1200 where applicable and must deliver the physical materials to the designated government location in Tracy, California. The opportunity is categorized under NAICS code 423490 and was posted on September 17, 2026, with a response deadline of September 28, 2026. All deliverables must meet strict government quality and safety standards to ensure successful integration into the DLA supply chain.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Balance Weight Set SupplierThis subcontract involves the procurement of a precision Weight Set and Balance for prime contractors supporting DLA supply contracts. The specific requirement is for NSN 6670008039680, manufactured by OHAUS Corporation, utilizing brass individual unit weights. All items must be packaged according to ASTM D3951 standards and marked and labeled in compliance with MIL-STD-129. The contract is issued by the Department of Defense under the ASC Commodities Division with a place of performance in Tracy, California. Interested parties must respond by September 25, 2026, for this requirement categorized under NAICS code 423490.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Nikon Ci-Pol Microscope SystemThis subcontract involves the procurement and delivery of a complete Nikon Ci-Pol polarizing microscope system for prime contractors supporting the USGS Geosciences and Environmental Change Science Center. The system must be fully integrated and functional, featuring Strain Free Nikon Optics, a DS100 Camera, and NIS Elements LE software to support sample displays at 4x, 10x, 20x, and 40x magnification. Delivery is required F.O.B. Destination, and the provider must maintain status as an Authorized Nikon Reseller. Managed by the Department of the Interior's Office of Acquisition Grants in Denver, this opportunity is a total Small Business Set Aside under NAICS code 423490. The solicitation was posted on September 17, 2026, with a response deadline of September 21, 2026.

Ofc Of Acquisition Grants-Denver

POSTED

DEADLINE

in about 7 hours

More opportunities from Massachusetts → DPW06 - Holden Department of Public Works

Same awarding agency

Fire Protection Air Compressor ReplacementThis subcontract involves the replacement of a fire protection air compressor for the Town of Holden Department of Public Works facility located on Industrial Drive in Holden, Massachusetts. The selected contractor is responsible for removing the existing oil-lubricated baseplate compressor and installing a new, fully operational unit, ensuring all connections to the fire protection air system are secure and compliant with applicable electrical and mechanical codes for fire protection equipment. The project is categorized under NAICS code 238220 and is managed by the Massachusetts Department of Public Works. Interested parties must submit their responses by the deadline of October 1, 2026, at 3:00 PM. The final deliverable is a complete, installed, and operational oil-lubricated baseplate compressor that meets all specified safety and technical standards.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Fire Protection System Valve ReplacementThe Fire Protection System Valve Replacement is a subcontract opportunity for the Town of Holden Department of Public Works to remove and install a dry pipe valve at the Senior Center. The selected contractor will be responsible for the removal of the existing valve, the installation and integration of a new unit, and the subsequent testing and commissioning to ensure full system integrity. All work must be performed in strict compliance with NFPA 13 standards and local fire codes to deliver a fully operational fire protection system. This project is categorized under NAICS code 238220 and is located on Industrial Drive in Holden, Massachusetts. Interested parties must submit their responses by the deadline of October 1, 2026, at 3:00 PM. The contract is managed by the Holden Department of Public Works within the state of Massachusetts.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Senior Center Sprinkler Valve and Compressor

Solicitation # BD-25-1281-DPW06-DPW06-133596

The Town of Holden Public Works Department is seeking formal quotes for a project involving the Senior Center Sprinkler Valve and Compressor. The scope of work requires the removal and replacement of an existing oil-lubricated baseplate fire protection compressor along with an existing dry pipe valve. This solicitation, identified by number BD-25-1281-DPW06-DPW06-133596, is being managed by the Holden Department of Public Works in Massachusetts. Interested parties must submit their responses by the deadline of October 1, 2026, at 3:00 PM. The project is located at Industrial Drive in Holden, MA, and the primary point of contact for this procurement is Nick Schwartz. This solicitation is categorized as a state and local government opportunity intended to maintain or upgrade the fire protection systems at the local Senior Center.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Pickleball Court Resurfacing and Line StripingThis subcontract opportunity with the Holden Department of Public Works involves the surface conversion of an existing tennis court into four regulation pickleball courts. The selected contractor will be responsible for cleaning and preparing the existing surface, applying a professional acrylic coating system, and utilizing precision equipment to layout new field and line markings. The project requires the use of specialized acrylic athletic surfacing materials to deliver a fully recolored and striped athletic surface. The project is located on Industrial Drive in Holden, Massachusetts. Interested parties must submit their responses by September 30, 2026, following the posting date of September 16, 2026. This work falls under NAICS code 238990 and is intended for prime contractors working on Department of Public Works projects.

All Other Specialty Trade Contractors

POSTED

DEADLINE

DAWSON TENNIS/PICKLEBALL COURT RECOATING

Solicitation # BD-25-1281-DPW06-DPW06-133358

The Town of Holden Department of Public Works is soliciting quotes for the resurfacing and recoating of the Dawson tennis courts located at 200 Salisbury Street, Holden, Massachusetts. The project involves converting the existing tennis court into a quad consisting of four regulation pickleball courts. The scope of work is limited to surface preparation, the application of an acrylic coating system for recoloring and recoating the entire court, and the application of new pickleball field and line markings according to a provided layout. The contractor is responsible for providing all labor, materials, tools, and equipment, and must field-verify all dimensions and existing conditions to ensure a durable and compatible system. Existing tennis posts, sleeves, nets, and anchors must be protected and remain in place, as no new pickleball hardware is included in the scope. All material disposal must comply with local, state, and federal requirements, and prevailing wages apply to the contract. The project value is estimated to be under 50,000 dollars. Quotes must be submitted by 12:00 PM on September 30, 2026, via email to Ryan Josti or delivered to the Holden Department of Public Works at 18 Industrial Drive. The Town Manager reserves the right to award the contract to the bidder deemed to be in the best interest of the Town of Holden.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS