Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Energy was posted on June 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Fire Protection Systems

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)
Solicitation # Panic Hardware (Electrical Room Egress Doors)
Management & Training Corporation is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project encompasses five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation area, and Vocational building. The selected contractor must conduct a site survey to verify door dimensions and fire ratings, supply Grade I heavy-duty panic bars with matching exterior trim and closers, and perform at least ten consecutive cycle tests to ensure fail-safe operation. All work must strictly adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and Americans with Disabilities Act standards. This is a fee-for-service subcontracting opportunity set aside for small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. Bidders are required to submit a lump sum price for the entire project along with individual pricing per deficiency by December 1, 2026. Required submission documents include a completed bid sheet, a supplier self-certification packet with a W-9, three references for similar projects, and an SBA certification letter if applicable. Awardees must provide proof of insurance and comply with federal regulations, including the Davis-Bacon Act prevailing wage rates for Canyon and Gem Counties, as well as various FAR clauses regarding security, whistleblower rights, and the prohibition of certain foreign purchases.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 1 hour ago

DEADLINE

in about 1 month
NAICS: 238290
New
Federal
Z--ID- KOOSKIA NFH-OVERHEAD DOOR REPLACE
Solicitation # 140FF027Q0033
The U.S. Fish and Wildlife Service is conducting market research via a Sources Sought Synopsis for the replacement of three roll-up garage doors at the Kooskia National Fish Hatchery in Kooskia, Idaho. The project involves the demolition and disposal of existing doors and the installation of three new sectional overhead doors, including one approximately 8' 4" x 8' 7" and two approximately 10' 2" x 10' 1". Additionally, the scope requires the installation of two 120vac electric door operators and general preventative maintenance for up to ten additional roll-up garage doors. The resulting contract is intended to be a Firm-Fixed-Price award with a performance period of 60 days, specifically scheduled from November 30, 2026, through December 30, 2026. This opportunity is designated as a total Small Business Set Aside under NAICS code 238290. Interested firms must submit a response by November 6, 2026, providing their CAGE code, UEI, and evidence of capability through up to three similar projects completed within the last five years. A mandatory site visit is required for all bidders to verify measurements and existing conditions. Final acceptance of the work will be based on compliance with the Statement of Work, verified functionality of the doors and electric operators, and complete site cleanup. All responses should be submitted electronically to the Contracting Officer, Cindy Salazar.
Fws Contracting Activity

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 238290
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica, through the D600 Department of Transportation (SaMoDOT), is soliciting proposals for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes one Independent model AAK137, one Montgomery model AA2986, and one Otis model AEP227. The selected contractor must provide monthly systemic maintenance, a dedicated maintenance supervisor for safety surveys, and 24/7 emergency callback services with a one-hour response time. All parts must be new, conform to Original Equipment Manufacturer standards, and be stocked in a local warehouse. The award will be granted to the best bidder based on a variety of factors, including the technical experience of key personnel, financial resources, and the ability to provide future service, rather than solely on the lowest price. Bidders must comply with Title II of the ADA, the Living Wage Ordinance, and Labor Code Section 1773.2 regarding prevailing wages. A payment bond is required for awards exceeding 25,000 dollars, and the City requires a certificate of insurance naming them as an additional insured. Proposals must be submitted electronically via the OpenGov portal by November 9, 2026, at 3:00pm. The contract includes a ten-day written notice period for termination without cause and requires notification of force majeure events within 24 hours.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

1 day ago

DEADLINE

in 13 days
NAICS: 238290
New
SLED
RFP 902787 Elevator Condition Assessment & Modernization Plan
Solicitation # 902787
The Alameda County General Services Agency Building Maintenance Department is soliciting proposals for a turnkey professional services contract to perform comprehensive condition assessments and develop modernization plans for elevator equipment at three Oakland, California locations: 1106 Madison Street, 1111 Jackson Street, and 1401 Lakeside Drive. The project encompasses a total of nine elevators, including Otis hydroelectric and overhead traction models, as well as US Elevator overhead traction units. The scope of work is divided into six phases, beginning with baseline scheduling and condition assessment reports, moving through the preparation of bid-ready modernization specifications and procurement support, and concluding with construction oversight and warranty period inspections. Qualified consulting firms must demonstrate at least five years of relevant experience, and staff performing the work must hold a current National Association of Elevator Safety Authorities International Qualified Elevator Inspector certification. As a public works project, all contractors must be registered with the California Department of Industrial Relations and adhere to prevailing wage and apprenticeship requirements. Proposals will be evaluated based on a maximum of 550 points, with a heavy emphasis on the description of proposed services and relevant experience over cost. Preference may be given to certified Small and Local Emerging Businesses. The awarded contractor will be ineligible to bid on any subsequent solicitations resulting from this assessment.
General Services Agency-Procurement

POSTED

1 day ago

DEADLINE

in 21 days

AI Contract Overview

Show more

The contract entails the design and installation of fire protection systems at the SLAC National Accelerator Laboratory in Menlo Park, California, with strict adherence to NFPA standards and the SLAC ESH Manual. All work must comply with established safety and environmental protocols to ensure the integrity and functionality of the systems within the facility’s operational environment. The procurement is classified as a subcontract under NAICS code 238290 and is managed by the Department of Energy through its contractor, SLAC National Accelerator Laboratory. Responses are due by July 2, 2026, with the solicitation posted on June 24, 2026. The place of performance is specified as Menlo Park, with a ZIP code of 94025, and all activities must be conducted at this location. The contract is not set aside for any specific small business category, and while no point of contact is listed, the full details and submission requirements can be accessed through the provided SAM.gov link. Contractors must be prepared to demonstrate technical competence, regulatory compliance, and the ability to execute work safely and on schedule within the unique infrastructure of a high-energy physics laboratory.

General Info

Design and install fire protection systems at SLAC Menlo Park per NFPA and ESH standards, due July 2, 2026.

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

Menlo Park, CA, 94025, USA

Set-Aside

NONE

Documents

This scope was carved out of SLAC_FEH_Optics_Lab_Construction_RFP_366145.

The full solicitation package (26 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SLAC FEH Optics Lab Construction Project

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Design and installation of fire protection systems in compliance with NFPA standards and SLAC ESH Manual.

More opportunities from Department Of Energy → Slac National Accel Labor -Doe Contractor

Same awarding agency

NAICS: 334111
New
Federal
Supermicro 1U rack-mount server assemblies
Solicitation # SLAC_368659_Supermicro_1U_Rack-mount_Server_Assemblies
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for twelve Supermicro 1U rack-mount server assemblies, model AS-1115HS-TNR. Each server must be configured with one AMD EPYC Turin 9255 CPU, 64GB of DDR5 ECC memory (2x 32GB), and a Supermicro DCMS license. Storage options include either no drive or one 240GB SATA drive, and network requirements specify either a 10GbE 4-port RJ45 or a combination of 2x SFP+ and 2x RJ45. This is a product-only procurement with no on-site services permitted. Quotes must be submitted by October 16, 2026, to Cheryl Stafford. The resulting purchase order will be a fixed-price contract with NET-30 payment terms. Source selection will be based on the Lowest Priced Technically Acceptable method and the best lead time. Domestic shipments are FOB Destination Prepaid and Add, while foreign shipments are CIP SLAC, Menlo Park, Duty Unpaid. Offerors must be registered in the System for Award Management and provide a completed Representations and Certifications Rider. Additionally, proposals must include the Harmonized Tariff Schedule code and Export Control Classification Number where applicable. Buy American Act certification is required for unit prices exceeding 15,000 dollars. While not direct Federal procurements, these subcontracts incorporate various FAR and DEAR clauses depending on the final contract value.
Electronic Computer Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 334517
New
Federal
X-ray imaging detector system
Solicitation # SLAC_369006_Xray_Imaging_Detector_System
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for an X-ray imaging detector system. The required equipment includes one XRD 4343CT-F22-C-000 imaging grade digital X-ray detector, an XRD-EPS 215W power supply, and associated AC, DC, extension, and PC connection cables, along with an XRD FG(E) OPTO PCIe Frame Grabber V4. Technical requirements specify a flat-panel detector configuration with an amorphous silicon sensor, a minimum active area of 40 cm x 40 cm, a 150 micron pixel size, and applicability for hard and high-energy X-ray diffraction greater than 20 keV. This is a product-only procurement with no on-site services permitted. Quotes are due by October 16, 2026, and will be evaluated based on the Lowest Priced Technically Acceptable method and the best lead time. The resulting purchase order will be a fixed-price contract with NET-30 payment terms. Domestic shipments are FOB Destination Prepaid and Add, while foreign shipments are CIP SLAC, Menlo Park, Duty Unpaid. Offerors must be registered in the System for Award Management and provide a completed Representations and Certifications Rider. Additionally, proposals should include HTS Codes, ECCNs, and a statement regarding duties and tariffs. Buy American Act certification is required for unit prices exceeding 15,000 dollars. While not direct Federal procurements, these subcontracts incorporate various FAR and DEAR clauses based on contract value thresholds, including specific regulations regarding equal opportunity, whistleblower rights, and export controls.
Irradiation Apparatus Manufacturing

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 333248
Federal
BL18 In-Vacuum Undulator
Solicitation # 367893(RE)
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting proposals for the design, fabrication, assembly, tuning, and delivery of an In-Vacuum Undulator (IVU) for SSRL BL18. The project requires a U.S. domestic end item source to develop a system including a vacuum sub-system with entrance and exit taper sections, motion control, and a support frame. Technical specifications are governed by SSRL Engineering Note M927, with a reference design based on the BL17 IVU. Key technical requirements include a longitudinal envelope of 3798.3 plus or minus 2.0 mm and specific magnetic period counts depending on the magnet design. The proposal submission deadline is October 30, 2026, at 5:00 PM PDT, with all documentation directed to Ryan Enos. The requested delivery date is 19 months after receipt of order to align with an August 2028 installation window. Award will be based on the combination most advantageous to SLAC, utilizing a price/technical tradeoff and qualitative assessment of factors including past performance, technical design, and financial stability. Required submission documents include firm fixed pricing, a Quality Assurance Plan, a Dun and Bradstreet report, and various representation and certification supplements. Compliance with E-Verify and the Buy American Act is mandatory.
All Other Industrial Machinery Manufacturing

POSTED

22 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS