Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Firefighting System Testing and Certification

Active

International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves comprehensive functional testing and certification of critical firefighting systems including fire pumps, monitors, piping, foam systems, and emergency shutdown mechanisms. The work requires detailed pressure testing, flow rate verification, and compliance validation to ensure all components meet established operational standards for reliability and safety. This subcontract is issued by the Jamaica Fire Brigade under the Government of Jamaica and is classified under NAICS code 541380, indicating technical testing and analysis services. Performance of the work is expected to take place in Jamaica, though specific location details are not provided. The solicitation was posted on August 4, 2026, and interested parties can access additional information through the official Jamaican e-procurement portal.

General Info

Functional testing and certification of firefighting systems in Jamaica per Government of Jamaica requirements.

Agency

Government of Jamaica → Jamaica Fire BrigadeView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

JAM

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Jamaica → Jamaica Fire Brigade

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Jamaica → Jamaica Fire Brigade

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Functional testing of fire pumps, monitors, piping, foam systems, and emergency shutdowns, including pressure testing, flow rate verification, and certification to operational standards.

Similar Contracts

Same NAICS industry code

Electrical Systems Testing

Solicitation # 6365

The City of Salem, Oregon is soliciting bids for Electrical Systems Testing under Solicitation Number 6365, with a response deadline of August 19, 2026, at 6:00 PM Pacific Time. The bid opportunity was posted on August 4, 2026, and is open to qualified contractors capable of performing comprehensive testing of electrical systems in alignment with applicable codes and standards. All work is expected to be performed within the state of Oregon, though the specific location within the state has not been detailed. The primary point of contact for inquiries is the Contracts and Procurement office, reachable via email at contracts@cityofsalem.net. Bidders must submit their proposals through the official portal linked in the solicitation details, as no alternative submission methods are indicated. There is no set-aside designation specified for this solicitation, making it open to all eligible respondents regardless of business size or ownership category.

City of Salem, OR

POSTED

about 17 hours ago

DEADLINE

Quality Testing and Compliance ServicesThe contract involves independent laboratory testing of asphalt mix samples to ensure compliance with Missouri DOT standards, focusing on critical parameters such as gradation, binder content, and compaction. This work is being procured as a subcontract under the City of Independence, Missouri, with the intent of maintaining quality and regulatory adherence for road construction and maintenance projects. The testing services must meet precise technical specifications to verify that materials used in pavement applications conform to state transportation requirements. The solicitation was posted on August 4, 2026, with a response deadline of August 25, 2026, giving interested parties approximately three weeks to submit proposals. The North American Industry Classification System code 541380 identifies this as a contract for other professional, scientific, and technical services, specifically laboratory testing. The place of performance and point of contact details are not specified, but the work is tied to Missouri DOT compliance and likely includes sample collection, analysis, and reporting for agencies or contractors under the City of Independence. Bidders must be equipped to perform accurate, certified laboratory testing and provide documented results that align with established state protocols.

City of Independence

POSTED

about 18 hours ago

DEADLINE

Radioactive Material Notification and LabelingThe contract requires compliance with strict protocols for screening components for radioactive material and adhering to labeling and notification standards outlined in MIL-STD-129 and DFARS 252.223-7. All subcontracted work must ensure that any presence of radioactive material is detected, documented, and reported in accordance with Department of Defense regulatory guidelines, with proper marking and documentation applied to shipments and components. The supplier is responsible for implementing quality control measures to verify the absence of radioactive contamination and for maintaining records that demonstrate compliance with federal defense acquisition regulations. This subcontract, awarded under the Defense Logistics Agency and classified under NAICS code 541380, is part of a broader Department of Defense procurement effort aimed at safeguarding the supply chain against inadvertent inclusion of radioactive materials. The contract mandates ongoing adherence to federal standards throughout the lifecycle of the components, from manufacturing through delivery, with an emphasis on accurate labeling and timely notification to relevant authorities. While no specific place of performance or point of contact is provided, the requirement is binding on all parties involved in the subcontracted work to ensure defense logistics integrity and regulatory compliance.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Calibration and Testing Services for Critical Application ItemsThe contract outlines services for the independent calibration, functional testing, and certification of pressure gages to meet rigorous military performance standards, ensuring all equipment is traceably validated before delivery. These activities are critical to maintaining the integrity and reliability of components used in defense applications, with all work requiring adherence to specified technical requirements and documentation protocols to guarantee compliance. The services must be performed by qualified entities capable of delivering precise, auditable results that support mission-critical operations. This is a total small business set-aside subcontract under NAICS code 541380, designated for small businesses and managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and is available through the DIBBS platform. Performance location and point of contact details are not specified, but the scope emphasizes nationwide delivery of certified pressure gages meeting DoD quality assurance benchmarks. All contractors must demonstrate capability in handling sensitive calibration and testing procedures aligned with federal military specifications.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Component Qualification and Testing Services for Defense ProcurementThe contract seeks third-party testing and certification services to qualify components for use in defense procurement systems, ensuring full compliance with Qualified Products List and Qualified Manufacturer List standards. Work must adhere to applicable Military Standards and require formal documentation submission to verify conformance, with all testing performed by accredited laboratories capable of meeting stringent defense-grade requirements. The effort is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and is managed by the ASC Commodities Division of the Department of Defense. Performance of the services is not restricted to a specific geographic location, allowing qualified small businesses nationwide to participate. All proposals must demonstrate technical capability, established quality control processes, and prior experience in supporting defense acquisition programs through recognized testing and certification frameworks aligned with MIL-STD specifications and QPL/QML requirements.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

First Article Testing (FAT) and Production Lot Testing (PLT) ServicesThe contract requires the performance of First Article Testing and Production Lot Testing for a CSI item, encompassing the full scope of test execution, detailed documentation, and submission of results to government authorities. All testing activities must adhere to specified technical and procedural standards to ensure compliance with defense requirements, with deliverables including comprehensive reports and certified records for governmental review. The work is classified as a subcontract under NAICS code 541380, indicating it falls within the professional, scientific, and technical services sector, and is managed by the ASC Commodities Division under the Department of Defense. Responses to this solicitation must be submitted by September 4, 2026, with no set-aside designation specified, meaning it is open to all eligible contractors regardless of size or status. The place of performance and exact office address are not provided, but the work is tied to the Department of Defense’s procurement ecosystem, and all submissions must be made through the designated DIBBS portal. The contract does not include point of contact details, implying that all inquiries and submissions should follow standard DIBBS procedures for the referenced solicitation number SPE4A626R0192.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Drain Line Camera Inspection ServicesThe contract seeks qualified subcontractors to perform fiber-optic camera inspections of building sewer and drain lines to detect blockages, damage, or structural deficiencies, with inspections to be provided complimentary alongside drain cleaning services. The work is tied to infrastructure maintenance efforts by the State of Rhode Island under NAICS code 541380, which covers other professional, scientific, and technical services, and requires the use of specialized equipment to visually assess underground pipelines without excavation. The opportunity is open for bidding with a response deadline of August 25, 2026, and is intended to support the state’s ongoing efforts to maintain and upgrade its sanitary and drainage systems through proactive inspection and repair. All services must be performed in conjunction with cleaning operations, meaning the camera inspection is not a standalone task but an integrated component of broader line maintenance. The place of performance and contact details are not specified, but the work is expected to occur across facilities under the jurisdiction of the Rhode Island agency responsible for public infrastructure. Interested parties must submit proposals through the official state vendor bidding portal prior to the deadline, and compliance with technical standards for video inspection, documentation reporting, and coordination with cleaning crews will be essential. The contract does not include set-aside provisions for small or disadvantaged businesses, and award decisions will be based on qualifications, experience, and the ability to deliver inspection services that meet state operational requirements.

State of Rhode Island

POSTED

about 21 hours ago

DEADLINE

Seed Quality Testing and CertificationThe contract pertains to third-party laboratory testing services for seed quality assessment, focusing on germination rate, purity, weed content, and disease screening to ensure adherence to national agricultural standards. These tests are critical for validating the viability and safety of seed lots intended for planting, helping to safeguard crop production and maintain the integrity of Jamaica’s agricultural sector. The work is to be performed under a subcontract arrangement, with the Ministry of Agriculture, Fisheries and Mining of the Government of Jamaica serving as the overseeing entity. The NAICS code 541380 indicates that the services fall under miscellaneous scientific and technical consulting services, emphasizing the specialized nature of the analytical work required. All testing must meet established benchmarks to certify seed quality, and the contract is publicly listed through the Jamaica Electronic Public Procurement System with a posted date of August 4, 2026.

Ministry of Agriculture Fisheries and Mining

POSTED

about 21 hours ago

DEADLINE

Alcohol and Controlled Substances Testing

Solicitation # 3344-26

Nueces County is seeking qualified vendors to implement a comprehensive alcohol and controlled substances testing program for its safety-sensitive employees, including approximately 30 commercial motor vehicle drivers subject to Federal Motor Carrier Safety Administration regulations, 750 additional employees covered under the Drug-Free Workplace Act of 1984, and up to 1,200 employees subject to reasonable suspicion testing. The contracted vendor must provide full-service testing capabilities including breath alcohol and split urine specimen collection, laboratory analysis, Medical Review Officer services, physical exams, respirator fit testing, immunizations, vision and audiometric screenings, and all related administrative and compliance support. The program must align with federal standards under 49 CFR Parts 40 and 382, including integration with the FMCSA Clearinghouse, and the vendor will be responsible for ensuring regulatory compliance, maintaining strict chain-of-custody protocols, and delivering timely and accurate reporting. The contract will run for an initial term of thirty-six months with the possibility of two twelve-month renewals, contingent on mutual agreement, and if no successor contract is awarded, the vendor must continue services on a month-to-month basis until replaced. Proposals must be submitted electronically via PublicPurchase.com by the deadline, with physical submissions accepted only if online access is unavailable, requiring one signed original and one PDF on a USB drive in a sealed envelope labeled with the RFP number and project name. The contract administrator is Jim Landers, Human Resources Director, and submissions should be directed to Michael Robinson, Purchasing Agent, at the Nueces County Courthouse. The county currently relies on Alliance for testing services, and the vendor selected will assume responsibility for all current and anticipated testing volumes, including projected increases in non-DOT tests over the next fiscal years. All required forms, qualifications, and documentation must be completed and submitted as specified, with no deviations permitted from the RFP requirements.

POSTED

about 22 hours ago

DEADLINE

First Article Testing and Quality DocumentationThe contract requires the execution and documentation of First Article Testing (FAT) to ensure compliance with government quality standards, specifically involving the submission of Inspection and Measurement Systems (IMS), Product Orientation Specifications (POS), and comprehensive test reports for official approval. All documentation must be meticulously prepared and submitted within the specified timeline to meet federal requirements, with emphasis on accuracy, traceability, and adherence to technical specifications established for defense-related components. The work is classified as a subcontract under NAICS code 541380 and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with a firm response deadline of September 3, 2026. Participation is open to qualified entities capable of delivering certified FAT outcomes and quality assurance documentation without set-aside restrictions, and performance is tied to ensuring the readiness and acceptance of products within the defense supply chain.

Ok DLA Aviation At Oklahoma City

POSTED

about 24 hours ago

DEADLINE

Quality Assurance & Calibration ServicesThe contract entails providing independent quality assurance, inspection, and calibration services for test equipment used in the overhaul of actuators, ensuring strict adherence to original equipment manufacturer standards, military specifications, and the AS9100 quality management system. All work must be performed with precision and documentation to verify compliance across technical and procedural requirements, with the goal of maintaining the integrity and reliability of aerospace and defense systems. The scope is focused on safeguarding the accuracy and traceability of testing instruments critical to actuator performance and safety. This is a subcontract opportunity issued by the Aviation Logistics Center under the Department of Homeland Security, with a solicitation posted on August 4, 2026, and a response deadline of August 12, 2026. The NAICS code 541380 classifies the work under scientific and technical consulting services, indicating a specialized technical engagement requiring certified expertise in calibration and aerospace quality standards. The place of performance and other location details are unspecified, suggesting flexibility in execution as long as contractual obligations are met. Submission is required through the SAM.gov portal, and interested parties must ensure all qualifications, certifications, and compliance measures are fully documented prior to the deadline.

Aviation Logistics Center (ALC)(00038)

POSTED

about 24 hours ago

DEADLINE

Fuel Quality Testing and Compliance Verification

USDA Ars Afm Apd

POSTED

about 24 hours ago

DEADLINE

More opportunities from Government of Jamaica → Jamaica Fire Brigade

Same awarding agency

Logistics and Delivery of Textile MaterialsThe contract involves the transportation and time-sensitive delivery of finished textile materials from production or storage locations to the Jamaica Fire Brigade, requiring reliable logistics execution to meet strict deadlines. The work falls under NAICS code 484220, indicating it pertains to truck transportation of other freight, and is structured as a subcontract, suggesting it may be part of a larger government-initiated project managed through the Government of Jamaica. Delivery must be performed efficiently and with precision, given the operational needs of the Jamaica Fire Brigade, though specific pickup points, delivery schedules, and performance metrics are not detailed in the provided data. The solicitation was posted on August 4, 2026, and further details can be accessed via the official Jamaica e-Procurement portal.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Textile Dyeing and Color Processing ServicesThe contract entails the industrial dyeing of terylene and wool fabrics to meet exacting specifications for black and blue hues, with strict emphasis on batch-to-batch consistency, colorfastness, and long-term durability under expected usage conditions. The work must be performed in compliance with industry standards for textile processing to ensure that the final products maintain their intended appearance and performance over time. This subcontract falls under NAICS code 313320, which classifies textile mill products manufacturing, and is issued by the Government of Jamaica through the Jamaica Fire Brigade. The solicitation was posted on August 4, 2026, and the work is expected to be carried out under the authority of the Jamaican government, though specific performance location details are not provided. All deliverables must adhere to the prescribed color standards without deviation, and the contractor is expected to implement quality control measures to guarantee uniformity across all production runs.

Fabric Coating Mills

POSTED

about 21 hours ago

DEADLINE

Textile Fabric Supply – Terylene/Wool Blend (Black & Blue)The contract involves the supply of 1,200 yards of a terylene and wool blended fabric in black and blue colors, intended for use in uniforms or protective clothing. The material must meet specific performance and durability requirements suited for occupational wear, with the blend ensuring a balance of strength, comfort, and flame resistance suitable for fire service personnel. The fabric is to be delivered in accordance with the specifications outlined by the Jamaica Fire Brigade, with all quantities and color divisions strictly adhered to as required for consistent uniformity across the force. This is a subcontract awarded under the North American Industry Classification System code 313310, which pertains to textile mill products manufacturing, and is managed by the Government of Jamaica through its electronic procurement portal. The posting date indicates the contract was made available in August 2026, and while no solicitation number or point of contact is provided, the place of performance and delivery details are not explicitly specified. All parties involved are expected to comply with the terms and conditions associated with government procurement, and full details can be accessed via the official Jamaica Electronic Procurement Portal link provided.

Textile and Fabric Finishing Mills

POSTED

about 21 hours ago

DEADLINE

Supply of Uniform Components and EmbellishmentsThe contract is for the supply of ceremonial uniform components including insignia, badges, buttons, epaulets, braiding, and other rank-specific embellishments tailored for firefighter dress uniforms under the Jamaica Fire Brigade. These items are essential for maintaining standardized appearance and hierarchical distinction within the force during formal and official events. The work is classified under NAICS code 339999, indicating it involves other miscellaneous manufacturing, and is structured as a subcontract, suggesting it will be executed by a vendor under a primary contractor engaged by the Government of Jamaica. The solicitation was posted on August 4, 2026, and all deliverables must meet precise specifications to ensure uniformity, durability, and adherence to national ceremonial standards. Performance is expected to be carried out in support of the Jamaica Fire Brigade’s operational and ceremonial needs, though the exact location of performance is not specified. The contract link provided directs interested parties to the official government procurement portal for further details and submission procedures.

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Specialty Textiles and Uniform FabricsThe contract is for the supply of high-quality, durable wool-blend and tropical-weight fabrics specifically engineered for ceremonial uniforms, encompassing materials for coats, trousers, and linings. These fabrics must meet formal-grade standards to ensure longevity, proper drape, and compliance with official uniform specifications under Jamaica's environmental and ceremonial demands. The procurement is under the Jamaica Fire Brigade, operating under the Government of Jamaica, and is classified as a subcontract within the NAICS code 313310, which pertains to textile mill product manufacturing. The solicitation was posted on August 4, 2026, and while the physical location of performance is not specified, the materials are intended for use in official ceremonial contexts by Jamaican fire service personnel. The contract's primary focus is on material quality, consistency, and suitability for institutional use within a tropical climate.

Textile and Fabric Finishing Mills

POSTED

about 21 hours ago

DEADLINE

Custom Tailoring and Garment AssemblyThe contract involves the full assembly of ceremonial firefighter suits to exacting military-style uniform standards, encompassing all stages from cutting and sewing to fitting and finishing, ensuring precise tailoring and structured design. The garments must be completed with appropriate insignia and adhere to formal ceremonial specifications, reflecting the dignity and tradition of the Jamaica Fire Brigade. All work must meet high-quality craftsmanship requirements suitable for official public and ceremonial duties. This is a subcontract under NAICS code 315210, which classifies it within the apparel manufacturing sector, and it is issued by the Government of Jamaica through the Jamaica Fire Brigade. The solicitation was posted on August 4, 2026, and while the place of performance and specific address details are not provided, the work is intended to support the operational and ceremonial needs of the fire brigade. Contractors must be prepared to fulfill all technical and aesthetic requirements without deviation, ensuring uniformity across all issued suits for formal events and public appearances.

Cut and Sew Apparel Contractors

POSTED

about 21 hours ago

DEADLINE

Project Management and Technical OversightThe contract encompasses comprehensive project management and technical oversight for the rehabilitation of a fireboat under the jurisdiction of the Jamaica Fire Brigade, a government entity of Jamaica. It mandates the coordination of all subcontractors involved in the project, including precise scheduling to ensure timely execution, rigorous quality control measures to meet operational standards, and meticulous documentation of all activities and deliverables. The contractor is responsible for providing regular, accurate client reporting to maintain transparency and alignment with governmental objectives throughout the rehabilitation process. The work falls under NAICS code 541618, indicating specialized management consulting services, and is structured as a subcontract within a broader government initiative managed through the Jamaica e-procurement system. All activities are to be carried out in accordance with the technical and administrative expectations set by the agency, though specific location details and point of contact information are not provided in the contract data.

Other Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

Marine Coating and Painting Supply and ApplicationThe contract entails the supply and application of marine-grade anti-corrosion and anti-fouling coatings across all critical areas of vessels, including the hull, deck, and superstructure. Work requires full surface preparation, application of primers, and multiple layers of topcoats to ensure long-term protection against saltwater exposure, UV degradation, and biological growth. The project demands strict adherence to maritime coating standards and specifications to maintain structural integrity and operational readiness under harsh marine conditions. This is a subcontract issued under the NAICS code 238290, which pertains to other specialty trade contractors, and is managed by the Government of Jamaica through the Jamaica Fire Brigade. The solicitation was posted on August 4, 2026, with performance expected to occur within Jamaican jurisdiction, though specific city or regional details are not indicated. The contract is open for bidding through the official government procurement portal, and all interested parties must comply with the technical and compliance requirements outlined in the full solicitation document.

Other Building Equipment Contractors

POSTED

about 21 hours ago

DEADLINE

Hull, Deck, and Structural RepairsThe contract entails comprehensive assessment and repair of critical marine structural components including hull integrity, deck plating, bulkheads, and steel or aluminum elements degraded by corrosion. Work scope involves welding, cutting, surface preparation, and the application of protective coatings to restore structural soundness and longevity. All activities must meet industry standards for marine repair and corrosion mitigation to ensure operational safety and durability in maritime environments. This is a subcontract under the Government of Jamaica through the Jamaica Fire Brigade with a NAICS code of 336611, indicating classification within ship building and repairing. The solicitation was posted on August 4, 2026, and is accessible via the Government of Jamaica’s electronic procurement portal. The place of performance and specific location details are not provided, but the work is expected to occur at facilities relevant to maritime or naval infrastructure under Jamaican jurisdiction. There is no set-aside designation specified, and no point of contact information is listed in the public data.

Ship Building and Repairing

POSTED

about 21 hours ago

DEADLINE

Marine Electrical and Firefighting Control Systems UpgradeThe contract involves the repair and modernization of critical marine electrical and firefighting control systems, encompassing upgrades to electrical distribution networks, firefighting pump controls, navigation lighting, switchboards, cabling, and emergency power systems. Work includes the integration of control panels and comprehensive troubleshooting to ensure full operational reliability and compliance with modern safety standards. The scope is focused on enhancing system performance, resilience, and interoperability across all identified subsystems to support maritime safety and emergency response capabilities. This subcontract is issued under the NAICS code 238210 for electrical contractors and is associated with the Government of Jamaica through the Jamaica Fire Brigade. The solicitation was posted on August 4, 2026, and the place of performance is tied to Jamaica, though specific location details are not provided. The contract is accessible via the Jamaica e-Procurement Portal, and all work must be executed to meet the operational demands of maritime and port-related infrastructure under the jurisdiction of the Jamaica Fire Brigade.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 21 hours ago

DEADLINE

Marine Vessel Mechanical Systems OverhaulThe contract entails a comprehensive overhaul of all primary mechanical propulsion systems on the fireboat, including complete inspection, repair, and replacement of engines, gearboxes, shafts, seals, and related components. The scope requires thorough diagnostics, precision alignment of drivetrain elements, and rigorous performance testing to ensure optimal operational readiness and reliability under emergency conditions. All work must meet stringent marine engineering standards to maintain the vessel’s ability to perform critical fire suppression and rescue missions. The work is being procured as a subcontract under the Government of Jamaica’s Jamaica Fire Brigade, with the North American Industry Classification System code 336612 indicating specialization in marine propulsion and related equipment manufacturing. The solicitation was posted on August 4, 2026, and the place of performance is expected to be in Jamaica, though specific location details are not provided. The contract’s success hinges on restoring or upgrading the vessel’s mechanical systems to ensure sustained mission-critical functionality without compromising safety or efficiency.

POSTED

about 21 hours ago

DEADLINE

General Construction Labor and Site SupervisionThe contract involves providing general labor, site cleanup, coordination, and oversight of subcontractors for the construction of laundry rooms at fire station facilities under the Jamaica Fire Brigade. The work falls under NAICS code 238990, indicating it is classified as other specialized construction services, and is structured as a subcontract. The contract was posted on August 4, 2026, and the place of performance is within Jamaica, though specific location details are not provided. The contracting entity is the Government of Jamaica, acting through the Jamaica Fire Brigade, and no set-aside provisions or organizational type classifications are specified. All activities must be conducted in alignment with the operational needs of the fire stations, ensuring timely completion, safety compliance, and effective management of subcontracted tasks. The contract can be accessed through the official Government of Jamaica e-procurement portal.

All Other Specialty Trade Contractors

POSTED

about 21 hours ago

DEADLINE