Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article and Production Lot Testing (FAT/PLT)

Active

Federal

Response Deadline11/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, to provide specialized testing and certification for aerospace projects. The selected contractor will be responsible for conducting First Article Testing and Production Lot Testing in accordance with MIL-STD-1916, ASQ H1331, and QAP 13873 SQAP-011259119. The scope of work involves verifying critical, major, and minor attributes at specific AQLs of 0.1, 1.0, and 4.0, with the final delivery of certified test reports for QAR review. The project is a total small business set-aside under NAICS code 541380, with performance taking place in Cherry Point. To be eligible, contractors must maintain ISO 9001:2015 or AS9100 certification. The solicitation was posted on October 27, 2026, and requires a response by November 4, 2026.

General Info

DoD subcontract for aerospace testing and certification in Cherry Point for small businesses.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A7-27-T-2130.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PAD ASSEMBLY, DROOP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized testing and certification for prime contractors on DLA Weapons Support ASC aerospace projects. Conducts First Article Testing (FAT) and Production Lot Testing (PLT) per MIL-STD-1916 or ASQ H1331 and QAP 13873 SQAP-011259119. Verifies critical, major, and minor attributes at AQLs of 0.1, 1.0, and 4.0. Requires ISO 9001:2015 or AS9100. Delivers certified test reports for QAR review.

Similar Contracts

Same NAICS industry code

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 6 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves providing specialized validation for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will use high-precision metrology equipment, such as optical comparators or CMM, to verify that the dimensions and tolerances of a first-article sample for NSN 5305-01-470-6044 align with required technical data. To qualify, the contractor must maintain an inspection system compliant with ISO 9001 or SAE AS9003 standards. The final deliverables for this engagement include the tested first article unit and a completed FAT certification report. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 541380.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing services supports prime contractors on DLA Weapons Support ASC aerospace projects located at Hill AFB. The scope of work involves performing X-ray, ultrasonic, dye penetrant, or magnetic particle inspections on Air Director Ducts in strict accordance with the provided technical data package. The selected provider is responsible for delivering comprehensive NDT inspection reports and formal certification of part integrity. To qualify for this engagement, the contractor must possess RQ040 NDT Accreditation and have access to the necessary NDT-specific equipment. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing third-party quality conformance and critical source inspections for prime contractors. The selected provider will conduct inspections at the point of origin, utilizing precision measurement tools and sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to ensure all technical requirements of the DLA Master List RA001 are met. Key deliverables include the submission of detailed inspection reports and formal quality certification documents. The project is managed by the Department of Defense under NAICS code 541380, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 9, 2026, regarding this requirement for specialized quality assurance services.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Materials Testing Laboratory (First Article Test)This subcontract involves providing First Article Testing services for the Department of Defense DLA Weapons Support Fluid Handling Division. The selected laboratory will perform testing on three units of nonmetallic tubing to ensure full compliance with MIL-PRF-6855F and MIL-PRF-6855/5A standards. Using certified equipment, the contractor must verify the materials' resistance to chemical exposure as well as their performance under specific pressure and temperature conditions. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. A critical requirement of the agreement is the delivery of a formal FAT test report, which must be submitted within 60 calendar days of the contract date. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Raw Material Supply for Sleeve BushingsThis subcontract involves the sourcing and delivery of certified raw alloy or material stock for prime contractors supporting DLA Weapons Support ASC projects. Specifically, the provider is responsible for delivering material stock for NSN 5365-01-622-5565 to the manufacturer, ensuring all shipments are accompanied by Mill Test Reports to maintain compliance with the DLA Master List of Technical and Quality Requirements. Depending on the restricted specifications of the materials, JCP certification may be required. The project is managed under the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Hill AFB. The opportunity is categorized under NAICS code 331210, with a response deadline set for November 5, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Sleeve Bushings (NSN 5365-01-622-5565)This subcontract involves the precision CNC machining of 12 sleeve bushings under NSN 5365-01-622-5565 for the Department of Defense, specifically the DLA Weapons Support ASC. The selected manufacturer must execute a First Article Test within 90 days and ensure all deliverables comply with MIL-STD-129 and MIL-STD-2073-1E standards. Final delivery of the finished units is required at the DLA Distribution Depot in Hill, Utah. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification, be part of the US/Canada Joint Certification Program, and maintain CMMC Level 2 compliance. The project falls under NAICS code 332710, with a response deadline of November 5, 2026.

POSTED

about 6 hours ago

DEADLINE

Aircraft Windshield Panel Supplier (NSN 1560015210182)This subcontract involves the fabrication and supply of 104 new, unused aircraft windshield panels for prime contractors supporting DLA supply contracts. The supplier must produce the panels to the technical specifications of NSN 1560015210182, utilizing precision molding equipment and aviation-grade transparent materials. To be eligible, the contractor must be an OEM or an approved source with a valid CAGE code. The contract mandates strict adherence to DPAS regulations and requires all items to be marked according to MIL-STD-129. Managed by the Department of Defense under the DLA Weapons Support ASC, the project falls under NAICS code 336413. Responses for this requirement are due by November 4, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supplier of GraCo Wiper ElementsThis subcontract involves the supply of GraCo Part Number 160342 wiper elements to prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work requires the delivery of commercial-off-the-shelf hardware along with the necessary certificates of conformance to guarantee full compatibility with Naval Air Warfare Center specifications. Managed by the Department of Defense under NAICS code 332999, the contract is associated with the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is designated for Tracy, California, with a response deadline set for November 5, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Manufacturer of Wiper Plate Assembly (PN 627915-1)This subcontract involves the fabrication and assembly of two Wiper Plate Assemblies (PN 627915-1) for prime contractors supporting DLA Weapons Support ASC projects. All manufacturing must strictly adhere to Naval Air Warfare Center Drawing 627915 Rev C and TDP Rev B Gen 5, with a specific prohibition against the use of additive manufacturing. Final products must be inspected and packaged according to MIL-STD-2073-1E standards. To be eligible, the manufacturer must maintain SAE AS9003 or ISO 9001 quality systems and hold a valid JCP certification to access necessary technical data. The project is managed under the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div, with performance located in Tracy, California. Responses are due by November 5, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Electrical Insulation Tape (NSN 5970-01-012-4280)This subcontract involves the supply of electrical insulation tape, identified by NSN 5970-01-012-4280, for prime contractors working on DLA Weapons Support ASC projects. The contractor is required to provide two rolls of tape delivered FOB Origin to Evenes Airbase. All materials must strictly conform to technical specification BASIC CID A-A-59474D, Revision D, and adhere to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking. To be eligible, the supplier must hold either SAE AS9003 or ISO 9001 certification and maintain full compliance with DFARS 252.204-7012. This procurement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with a response deadline set for November 5, 2026.

Pharmaceutical Preparation Manufacturing

POSTED

about 6 hours ago

DEADLINE

Manufacturing and Supply of Spacer, Sleeve (NSN 5365010716787)This subcontract involves the manufacture and supply of 6,250 units of Spacer, Sleeve (NSN 5365010716787) for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. All parts must be produced in accordance with the DLA Master List of Technical and Quality Requirements and delivered FOB Origin from New Cumberland. The contractor is required to strictly adhere to the Buy American Act and the Berry Amendment. Additionally, all packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and PPP-H-1581 standards. The project falls under NAICS code 332510.

Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Aircraft I/O Panel Assemblies (NSN 1680-01-548-3582)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the procurement and delivery of eight Aircraft I/O Panel Assemblies, part number 5353370-001. The selected provider must ensure all units are packaged and marked in strict accordance with RP001, MIL-STD-2073-1E, RQ017, and MIL-STD-129 standards. Performance will take place in New Cumberland, Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423840. To be eligible, contractors must maintain Buy American Act compliance and complete a CMMC Level 2 Self-Assessment. Responses are due by November 5, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Supply of Forging-Grade Aerospace AlloyThis subcontract involves the supply of raw forging-grade aerospace alloy to prime contractors supporting DLA Weapons Support ASC projects for the Department of Defense. The scope of work requires the delivery of certified raw material in the form of billets or pre-forms that strictly adhere to the specifications outlined in Drawing NR 81205 65-18455. To ensure quality and compliance, the provider must furnish all necessary Material Test Reports and Certificates of Conformance. The project is managed under NAICS code 332111 and is associated with the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered at Tinker AFB, zip code 73145-8000. Interested parties should note the response deadline of November 5, 2026, following the posting date of October 28, 2026.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Cam Assembly, Cove Lip DoorThis subcontract involves the manufacture of two completed and inspected Cam Assemblies for Cove Lip Doors, supporting aerospace projects for the DLA Weapons Support ASC. The work requires forging and precision machining in strict accordance with Basic Drawing NR 81205 65-18455 Rev B, necessitating the use of industrial forging presses and CNC machining centers. Performance will take place at Tinker AFB. To be eligible, the contractor must maintain specific high-level certifications, including JCP certification, a Boeing Rights Guard License, and CMMC Level 2 compliance. The opportunity was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Grooved, Headed Pin Supplier (NSN 5342-13-122-9420)This subcontract involves the manufacture or procurement of 55 new, unused grooved, headed pins under NSN 5342-13-122-9420 for critical applications. The supplier will support prime contractors delivering to the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. Delivery is required FOB Destination. The supplier must adhere to strict quality control and packaging standards, including MIL-STD-2073-1E and MIL-STD-129, with sampling conducted per MIL-STD-1916 or ASQ. Additionally, the contractor is required to maintain SPRS assessment compliance. The opportunity is categorized under NAICS code 332721, with a response deadline of November 7, 2026.

Precision Turned Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Production Lot Testing (PLT) Support

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing and Validation for Cushioning Pads

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) and Quality Conformance Inspection

Defense Logistics Agency

POSTED

DEADLINE

Production Lot Testing and Quality Validation

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) Services for Air Filter Elements

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Production Lot Testing (PLT) for CuNi Flanges

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Quality Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Quality Assurance and Airworthiness Certification

POSTED

DEADLINE

FAA Airworthiness Certification & Traceability Audit

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Cable Continuity and Isolation Testing Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS