This Government Contract opportunity from Department Of Defense was posted on October 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

First Article and Production Lot Testing (FAT/PLT)

Closed

Federal

Submission Closed10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a fee-for-service subcontract to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, requiring a qualified industrial hygiene consultant to evaluate potential exposures for 27 students and instructors during activities such as masonry, grinding, and sand handling. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA action levels of 25 µg/m³ and permissible exposure limits of 50 µg/m³. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for dust control. Bids must be submitted via email to Wendy Lawrence by 3:00 PM EST on November 6, 2026. A complete proposal must include a bid sheet, a completed supplier packet with a W-9 and self-certification form, proof of insurance, and three references for similar projects. Evaluation is based on best value, focusing on the consultant's qualifications, technical sampling approach, and estimated schedule. The contract mandates compliance with Service Contract Labor Standards (WD#2015-4193 Rev 32) and various FAR regulations, including small business utilization and the protection of government interests for subcontracts exceeding $45,000. Award opportunities are open to various SBA-certified small business categories, including VOSB, SDVOSB, WOSB, and HUBZone.

POSTED

DEADLINE

Infrastructure Inspection and Watertightness Testing

City of Richmond Hill

POSTED

DEADLINE

Field Performance Testing and Certification

Palos Verdes Peninsula Unified School District

POSTED

DEADLINE

Environmental Laboratory Analysis (Lead & Asbestos)

POSTED

DEADLINE

Construction Quality Control Testing

Maine Department of Transportation

POSTED

DEADLINE

Bridge Maintenance Inspection and QC Testing

Maine Department of Transportation

POSTED

DEADLINE

Accredited Environmental Laboratory ServicesThis subcontract for Accredited Environmental Laboratory Services supports prime contractors on environmental monitoring projects for the District of Ucluelet in Canada. The selected provider will be responsible for conducting analytical testing on water and sediment samples, specifically measuring Ammonia Nitrogen and Fecal Coliforms in water, as well as Redox Potential, Particle Size, and Total Organic Carbon in sediment. To qualify, the laboratory must hold ISO certifications or equivalent relevant accreditations to ensure the delivery of certified analytical reports. Interested parties must submit their responses by December 3, 2026, in accordance with the solicitation posted on November 4, 2026.

POSTED

DEADLINE

Certified Hazardous Waste Analytical TestingThis subcontract for Certified Hazardous Waste Analytical Testing supports prime contractors on California Department of Transportation projects in Monterey. The selected provider will perform chemical analyses to identify, characterize, and profile waste materials collected from project sites. These services are essential for determining proper waste classification and ensuring materials are profiled correctly for acceptance at designated disposal facilities. To qualify for this engagement, the contractor must hold both Environmental Laboratory Accreditation Program and State Water Resources Control Board certifications. The primary deliverables for this contract include certified chemical analysis reports and detailed waste profiles. Interested parties should note the response deadline of November 17, 2026.

California Department of Transportation

POSTED

DEADLINE

Force Plate SKID Truck Calibration for the MNT team

Solicitation # 601440000054633

The Texas Department of Transportation (TxDOT) has issued Invitation for Bid (IFB) 601440000054633 for Force Plate SKID Truck Calibration to support the MNT team. This solicitation, a re-advertisement of a previous notice, seeks a vendor to provide specialized pavement testing and data collection equipment services, specifically focusing on pavement sensors for reading road conditions. The contract requires the vendor to perform work in accordance with specific work requirements and technical specifications, including the MNT PAV load cell pin layout. Award will be based on best value, with purchase price and compliance with technical specifications serving as the primary considerations. To be eligible, respondents must pass a documentation review and maintain a vendor performance rating of A, B, or C in the CPA Vendor Performance Tracking System. The submission process requires a multi-section response including a signed Execution of Response, a completed Bid Table with unit pricing, a Child Support Obligation Schedule, and detailed documentation demonstrating compliance with the Statement of Work. All responses must be submitted via the designated procurement portal by November 4, 2026. The resulting contract will mandate a one-year performance warranty against defects in workmanship and a minimum 12-month material warranty covering 100 percent of parts and labor. Additionally, the selected vendor must maintain specific insurance coverage, adhere to strict confidentiality and public disclosure restrictions, and may be required to submit a comprehensive quality assurance plan upon request. Performance will take place in Texas, with specific delivery instructions for Austin.

Texas Department of Transportation

POSTED

DEADLINE

Roofing and Waterproofing InspectionThis subcontract opportunity with OC Public Works involves providing specialized inspection services for roofing and waterproofing assemblies. The selected contractor will be responsible for inspecting roofing materials and installation, verifying waterproofing membranes, and utilizing technical tools such as moisture probes and infrared thermography. Key deliverables include the submission of detailed inspection reports and the formal certification of waterproofing. Qualified candidates must employ a certified roofing inspector to ensure all standards are met. The solicitation was posted on November 3, 2026, with a response deadline of December 23, 2026. This project falls under NAICS code 541380 and is intended for prime contractors operating on OC Public Works projects.

POSTED

DEADLINE

Pavement and Asphalt ServicesThis subcontract for Pavement and Asphalt Services involves providing specialized testing and inspection of asphalt and pavement materials for prime contractors working on OC Public Works projects in California. The scope of work includes conducting subgrade and aggregate-base testing, asphalt sampling, and pavement coring, as well as performing detailed condition surveys and forensic evaluations. The selected provider will utilize pavement coring machines and asphalt sampling tools to generate and deliver comprehensive pavement condition reports and core test results. The opportunity is categorized under NAICS code 541380 and was posted on November 3, 2026. Interested parties must submit their responses by the deadline of December 23, 2026. Further details regarding the solicitation can be accessed through the provided OpenGov procurement portal.

POSTED

DEADLINE

Structural Steel and Metals Testing and InspectionThis subcontract for Structural Steel and Metals Testing and Inspection involves providing specialized inspection and testing services for prime contractors on OC Public Works projects in California. The scope of work focuses on structural steel, reinforcing steel, welding, and bolting, including the verification of metal decks and the performance of visual and non-destructive testing for welds. The selected contractor is required to provide a Certified Welding Inspector and a Professional Engineer stamp for all final reports. Key deliverables include detailed inspection reports and formal certifications for welding and bolting. The solicitation was posted on November 3, 2026, with a response deadline of December 23, 2026.

OC Public Works

POSTED

about 19 hours ago

DEADLINE

in about 2 months

AI Contract Overview

This HUBZone set-aside subcontract involves providing comprehensive destructive and non-destructive testing services for prime contractors supporting DLA Troop Support projects. The scope of work specifically includes conducting First Article Testing for NSWC IHD DET Picatinny and Production Lot Testing to ensure quality conformance according to the Technical Data Package. The contractor is responsible for delivering material and process certifications, inspection method sheets, signed test reports, and DD Form 1222. Performance for this Department of Defense requirement will take place in New Cumberland, Pennsylvania, under NAICS code 541380.

General Info

HUBZone subcontract for destructive and non-destructive testing services in New Cumberland, Pennsylvania.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

HZC

Documents

This scope was carved out of SPE8EE-27-T-0189.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SLING, MULTIPLE LEG

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 15

subcontract

Response DeadlineOct 26

Deadline has passed

Submission Closed

10/26/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Office AddressN/A

ContactsNo contact information available

Full Description

Performs destructive and non-destructive testing for prime contractors on DLA Troop Support projects. Conducts First Article Testing (FAT) for NSWC IHD DET Picatinny and Production Lot Testing (PLT) to validate quality conformance per the TDP. Provides material and process certifications and inspection method sheets. Delivers signed test reports and DD Form 1222.

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

First Article and Production Lot Testing (FAT/PLT)

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open