Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article and Production Lot Testing (FAT/PLT)

Open

Federal

Response Deadline11/19/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing technical testing services for prime contractors supporting DLA Weapons Support Land projects. The scope of work focuses on conducting First Article Testing on two units followed by Production Lot Testing to ensure quality conformance with the Technical Data Package. The successful contractor is responsible for delivering a First Article Test Report and validated results from the production lot testing. The project is managed under the Department of Defense and requires strict adherence to ITAR and EAR compliance, as well as JCP certification for necessary data access. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, under NAICS code 541380.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-2431.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FENDER, VEHICULAR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 12:00:00 PM ESTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical testing for prime contractors on DLA Weapons Support Land projects. Conducts First Article Testing (FAT) on 2 units and subsequent Production Lot Testing (PLT) to validate quality conformance against the Technical Data Package. Requires JCP certification for data access and ITAR/EAR compliance. Delivers a First Article Test Report and validated PLT results.

Similar Contracts

Same NAICS industry code

First Article Testing and Validation

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article and Production Lot Testing (PLT)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, focuses on providing critical quality assurance testing for prime contractors fulfilling DLA supply contracts. The scope of work involves executing First Article Testing to validate initial production runs and Production Lot Testing to maintain batch consistency. All activities must align with the Technical Requirements Package and the DLA Master List of Technical and Quality Requirements, utilizing specialized facilities to verify material and structural integrity. The contractor is responsible for delivering formal test reports and CDRL Form DD 1423 to document compliance. This opportunity is categorized under NAICS code 541380, with the place of performance located in Phoenix, Arizona. Interested parties must adhere to the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) Execution

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

First Article Test (FAT) and Validation ServicesThis subcontract for First Article Test (FAT) and Validation Services supports the DLA Weapons Support Fluid Handling Division at Tinker AFB. The selected provider will perform critical testing for prime contractors to validate manufacturing processes, specifically executing protocols for dimensional inspection, material verification, and Class 3 thread compliance. These tasks must be completed using high-precision gauging or CMM equipment within a facility that maintains ISO 9001 or SAE AS9003 compliance. The primary deliverables for this engagement include a comprehensive FAT Certification report and one validated first-article unit. This opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 541380. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Quality Assurance and Technical Certification for Safety Valves

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Production Lot Testing (PLT) SupportThis subcontract opportunity is for Production Lot Testing support benefiting the Department of Defense under the DLA Weapons Support Electrical Devices Division. The selected contractor will be responsible for coordinating production lot testing for prime contractors, which includes selecting random samples for Government Quality Assurance Representative review, preparing comprehensive test data packages with material certifications and inspection sheets, and managing traceable shipping to the Redstone Technical Test Center. The final deliverable consists of five validated test samples along with all necessary supporting documentation. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, to be considered for this specialized quality assurance and logistics coordination role.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Product Verification Testing (PVT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) for Metallic Hose Assemblies

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) ServicesThis subcontract opportunity is for First Article Testing services supporting prime contractors under the DLA Weapons Support Land Supplier Opns Vehicle Spt. The selected provider will perform testing on initial production units using pneumatic calibration tools and pressure testing equipment to verify the functionality of valve relays. The scope of work requires strict compliance with FAR clause 52.209-3 and culminates in the delivery of a formal FAT report and certification for the first article unit. The project is designated as a Total Small Business Set-Aside under NAICS code 541380 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 19, 2026, following the posting date of November 8, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Metrology and Quality Validation for Aircraft Structural ComponentThis subcontract involves providing precision metrology and quality validation services for aircraft structural components supporting the DLA Weapons Support ASC. The scope of work requires the dimensional verification of grid units and trammel points to strict tolerances ranging from 0.005 to 0.014 inches. These measurements must be performed using CMM or other high-precision metrology tools, with sampling plans executed according to MIL-STD-1916 or ASQ H1331 standards to ensure zero non-conformance. The selected contractor is responsible for delivering a certified Inspection Report and a complete Quality Assurance Package. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense. Interested parties must respond by November 20, 2026, for performance located in the 73145-9031 zip code area.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Quality Assurance and Lot Acceptance TestingThis subcontract for Quality Assurance and Lot Acceptance Testing supports prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The primary objective is to perform independent quality verification and sampling of critical application bolts to ensure zero non-conformance. Work is performed in New Cumberland, Pennsylvania, and requires strict adherence to ASQ Z1.4 and STD-105 sampling standards to determine appropriate lot sizing. The scope of work involves using precision measurement tools, such as micrometers, calipers, and gauges, to verify that components meet close tolerance specifications. The successful contractor is responsible for delivering detailed inspection reports and formal certifications of conformance. This effort falls under NAICS code 541380 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Accessories Stowage Basket Fabrication and Supply

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Defense-Compliant Packaging and Crating ServicesThis subcontract for Defense-Compliant Packaging and Crating Services involves providing specialized packaging, marking, and palletization for prime contractors supporting DLA Weapons Support Land projects. The scope of work requires the processing of four hardware units using MIL-SPEC materials and industrial labeling equipment to ensure full compliance with ASTM D3951 packaging standards, MIL-STD-129 marking and labeling requirements, and RP001 DLA palletization guidelines. The completed units are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This opportunity is managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency, falling under NAICS code 488410. The response deadline for this requirement is November 19, 2026.

Motor Vehicle Towing

POSTED

DEADLINE

Manufacturing of Rigid Connecting Links (PN: A05-27895-000)This subcontract involves the manufacture of four finished and inspected rigid connecting links, part number A05-27895-000, for prime contractors supporting DLA Weapons Support Land projects. The fabrication process requires CNC milling and turning to ensure all components meet the technical and quality specifications outlined in the DLA Master List RA001. The contractor must adhere to strict regulatory standards, including the Buy American Act and the Berry Amendment for material sourcing, as well as NIST SP 800-171 cybersecurity standards. Performance will take place in New Cumberland, Pennsylvania, under the oversight of the Department of Defense.

POSTED

DEADLINE

Metal Casting and Tooling for Vehicular FendersThis subcontract involves the metal casting and tooling of 30 vehicular fenders for the Department of Defense, specifically supporting DLA Weapons Support Land projects. The selected provider is responsible for producing the fenders according to the specified Technical Data Package and must develop and maintain all necessary production tooling. Final deliverables include the finished fenders and a Certificate of Quality Compliance. To be eligible, contractors must hold JCP certification and adhere to ISO 9001 or SAE AS9003 quality standards, along with CMMC Level 2 compliance. The use of additive manufacturing is strictly prohibited for this project. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 331511.

POSTED

DEADLINE

Military-Grade Packaging and Palletization Services

Freight Transportation Arrangement

POSTED

DEADLINE

Back-up Ring (Preform) Supply

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Plain Encased Seal Supplier (NSN 5330-00-154-2132)This subcontract involves the manufacture or procurement of plain encased seals for prime contractors supporting DLA Weapons Support Land projects. The required seals must feature steel cases and synthetic rubber elements, adhering to precise dimensions of a 5.750 inch shaft, 7.000 inch bore, and 0.562 inch width, with a performance rating of 2000 fpm surface speed. The supplier must provide asbestos-free certification and ensure all items are packaged according to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 standards. The final deliverable consists of two certified and packaged seals for shipment to Japan. This opportunity is managed by the Department of Defense under NAICS code 331221.

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

MIL-SPEC Opaque Packaging Supplier

Plastics Bag and Pouch Manufacturing

POSTED

DEADLINE

Nonmetallic Special Shaped Section Seal Manufacturer

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and International Shipping Services

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Plain Encased Seals (NSN 5330-00-492-1789)

Marking Device Manufacturing

POSTED

DEADLINE

Supply of MIL-DTL-46027 Compliant Raw MaterialsThis subcontract involves the sourcing and delivery of raw metals and alloys for prime contractors supporting DLA Weapons Support Land Supplier Opns Vehicle Spt projects. The supplier is responsible for providing materials that strictly adhere to the chemical and physical properties outlined in MIL-DTL-46027. Essential deliverables include material test reports, comprehensive traceability documentation, and certifications of conformance to ensure all materials are certified before delivery to the fabricator. The contract is designated as a Total Small Business Set-Aside under NAICS code 423510 and requires strict compliance with the Buy American Act and the Berry Amendment. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, to meet the requirements of the Department of Defense.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing and Validation Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Textile and Materials Testing Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Independent Material Verification and Quality Assurance

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing and Certification Services

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) and Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ballistic Quality Assurance and Lot Testing

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS