Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Plain Encased Seal Supplier (NSN 5330-00-154-2132)

Open

Federal

Response Deadline11/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture or procurement of plain encased seals for prime contractors supporting DLA Weapons Support Land projects. The required seals must feature steel cases and synthetic rubber elements, adhering to precise dimensions of a 5.750 inch shaft, 7.000 inch bore, and 0.562 inch width, with a performance rating of 2000 fpm surface speed. The supplier must provide asbestos-free certification and ensure all items are packaged according to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 standards. The final deliverable consists of two certified and packaged seals for shipment to Japan. This opportunity is managed by the Department of Defense under NAICS code 331221.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

331221 - Rolled Steel Shape Manufacturing

Place of Performance

FPO, AP, 96322-1400, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-2467.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, PLAIN ENCASED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies plain encased seals for prime contractors on DLA Weapons Support Land projects. Manufactures or sources seals with steel cases and synthetic rubber elements to precise dimensions (5.750" shaft, 7.000" bore, 0.562" width) rated for 2000 fpm surface speed. Requires asbestos-free certification and packaging per MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117. Delivers two certified, packaged seals for shipment to Japan.

Similar Contracts

Same NAICS industry code

Supplier of Hexagon Head Cap Screws (NSN 5305-012-6436-02)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the supply of 5,486 hexagon head cap screws under NSN 5305-012-6436-02. The screws must be manufactured or sourced in accordance with TDP Rev B Gen 2 and Basic Drawing NR 19207 12338225 Revision G. Performance is based in Albany, and the contract is designated as a total small business set-aside under NAICS code 331221. Strict quality and regulatory standards apply, including the requirement for ISO 9001 or SAE AS9003 quality systems and compliance with DFARS 252.225-7001. Technical specifications mandate sampling per MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-130N. The response deadline for this procurement is November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of COMP 301 Corrosion-Resistant Cold-Rolled Steel SheetsThis subcontract involves the supply of 13 COMP 301 corrosion-resistant cold-rolled steel sheets for prime contractors delivering to DLA Distribution Warner Robins. The materials must be precision cut to dimensions of 0.0400 inches by 36 inches by 10 feet, featuring a 2B finish and undergoing hard heat treatment. All deliverables must be accompanied by Mill-Material Certification and packed in accordance with MIL-STD-2073-1E and ASTM A700 standards. The contractor is required to maintain strict compliance with QSLM/QSLD standards and adhere to the Buy American Act. Performance will take place at Robins Air Force Base, with the project falling under NAICS code 331221 for the Department of Defense.

POSTED

DEADLINE

Aluminum Alloy 6061-T6 Tubing SupplierThis subcontract involves the supply of 391 feet of aluminum alloy 6061-T6 tubing for prime contractors delivering to the Defense Logistics Agency Weapons Support Fluid Handling Division. The tubing must meet Type 1 specifications with an outer diameter of 1.25 inches and a wall thickness of 0.049 inches, provided in random lengths between 10 and 12 feet. All products are required to feature continuous marking and lot numbering in accordance with WW-T-700/6 standards. The project falls under NAICS code 331221 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of PIN-RIVET (NSN 5320015499497)This subcontract involves the manufacture or procurement of 194 units of PIN-RIVET fasteners, identified by NSN 5320015499497, for the Defense Logistics Agency Weapons Support ASC Commodities Division. The contractor is responsible for delivering the items FOB Origin to the DLA Distribution Depot Oklahoma located at Tinker AFB. Strict quality and regulatory standards are mandated for this agreement, including ISO 9001:2015 inspection systems and sampling according to MIL-STD-1916 or ASQ H1331. Additionally, the contractor must ensure compliance with the Buy American Act, NIST SP 800-171 security standards, and specific military specifications for packaging and marking under MIL-STD-2073-1E and MIL-STD-129.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of 440 CRES Stainless Steel StockThis subcontract involves the supply of certified 440 CRES stainless steel raw material to prime contractors supporting DLA Weapons Support Fluid Handling Division aerospace projects. The material is specifically intended for the production of critical hydraulic components and must be accompanied by full material certifications and Mill Test Reports. These documents are required to verify strict compliance with aerospace industry standards and the Buy American Act. The procurement is managed under NAICS code 331221 for the Department of Defense, with the place of performance located in New Cumberland. Interested parties must adhere to the timeline established by the posting date of November 6, 2026, with a final response deadline of November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0265

Solicitation SPE8E4-27-T-0265 is a request for 13 sheets of corrosion-resistant, cold-rolled steel (COMP 301) with a hard heat treatment and 2B finish. The material must be 0.0400 inches thick, 36 inches wide, and 10 feet long, with a reference weight of 311.472 lbs per sheet. All material must be supplied in whole feet lengths only, and no sheets will be accepted unless they conform to exact dimensions, as test coupons are strictly prohibited. Delivery is required within 20 days after award, with a need ship date of December 7, 2026, and a destination of DLA Distribution Warner Robins in Georgia. Compliance with the Qualified Suppliers List for Manufacturers/Distributors (QSLM/QSLD) is mandatory, and any product not meeting these terms is considered an unauthorized substitution. Each unit must feature continuous identification markings, including the DLA contract delivery order number, NSN, specification number, and manufacturer details, applied via stamping or stenciling. A Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM A700, ensuring items are protected from physical damage. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and compliance with the Buy American Act.

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0276

This contract is a total small business set-aside for the procurement of 10 units of structural steel metal plating. The material is specified as ordinary strength, hot rolled, sheared edge, and annealed steel with dimensions of 0.250 inches thick, 72 inches wide, and 240 inches long. The product must be manufactured in accordance with MIL-S-22698C(2) and comply with the American Bureau of Shipping (ABS) Rules for building and classing steel vessels, Part 2, Section 1, including Appendix 2/D. Material will only be accepted if it is produced by an approved steel mill and includes an ABS Surveyor's endorsement on the certificates. Key requirements include a mandatory Certificate of Quality Compliance (Mill-Material Certification) provided with every shipment. Strict marking standards per MIL-STD-129 are required, including the DLA contract delivery order number, NSN, and manufacturer details; failure to comply with these marking requirements is grounds for product rejection. Packaging must adhere to MIL-STD-2073-1E and ASTM A700, ensuring protection from physical damage. The contract is a fixed-price award with destination inspection and acceptance, requiring delivery within 76 days after order. Eligible awardees must be listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM).

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0275

This contract is a total small business set-aside for the procurement of 13 units of structural metal plates. The material is specified as ordinary strength, hot rolled, sheared edge, and annealed steel with dimensions of 0.250 inches thick, 72 inches wide, and 240 inches long. The plates must be manufactured in accordance with MIL-S-22698 and the American Bureau of Shipping (ABS) rules for building and classing steel vessels, and they must be supplied in whole feet lengths only. A critical requirement for acceptance is the endorsement of certificates by an ABS Surveyor and the provision of a Certificate of Quality Compliance with every shipment. The procurement is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. Strict marking requirements apply, including the use of stamping or stenciling to identify the DLA contract delivery order number, NSN, specification number, and manufacturer details; failure to comply with these markings is grounds for product rejection. Delivery is required within 20 days after receipt of order, with destination inspection and acceptance. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM A700, and the contract incorporates various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the prohibition of mercury-containing compounds.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0274

This fixed-price solicitation, SPE8E4-27-T-0274, is for the procurement of 11 sheets of aircraft-quality steel (COMP 4130), cold finish and annealed, with dimensions of 0.125 inches thick, 36 inches wide, and 96 inches long. The material is designated as a critical application item and must be supplied in whole feet lengths only, with no test coupons allowed. Delivery is required within 20 days of award to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of December 7, 2026. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates a Certificate of Quality Compliance (Mill-Material Certification) for every shipment. Strict marking requirements apply, requiring each unit to be identified via stamping or stenciling with the DLA contract delivery order number, NSN, specification details, and manufacturer information. Packaging must adhere to MIL-STD-2073-1E and ASTM A700 standards to prevent physical damage. The procurement is governed by various FAR and DFARS clauses, including requirements for safeguarding covered defense information and compliance with the Buy American Act.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0159

Solicitation SPE8E4-27-T-0159 is a small business set-aside request for quotations issued by DLA Troop Support for the procurement of seven sheets of corrosion-resistant steel. The material must be COMP 304, cold rolled, quarter hard, with specific dimensions of 0.020 inches thick, 48 inches wide, and 96 inches long. Compliance with SAE AMS5910D and SAE AMS2807C is required, and the item is designated as a critical application item. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The contract mandates strict adherence to technical specifications, noting that test coupons are not permitted and sheets must conform to exact dimensions. A Certificate of Quality Compliance must accompany every shipment. Rigorous marking requirements are in effect, requiring each unit to be identified with the contract delivery order number, NSN, specification number, grade, alloy, manufacturer name, heat and lot number, and dimensions using approved stamping or stenciling methods. Packaging and preservation must follow MIL-STD-2073-1E and ASTM A700, with delivery set for FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB.

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0273

Solicitation SPE8E4-27-T-0273 is a Request for Quotations for 14 sheets of aircraft quality steel, COMP 4130, which must be cold finish and annealed. The material specifications require a thickness of 0.125 inches, a width of 36 inches, and a length of 96 inches. The procurement is governed by technical standards SAE AMS2807C and QAP 13873, and requires a Certificate of Quality Compliance to be provided with every shipment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The contract mandates strict adherence to dimensions, prohibiting the use of test coupons, and requires material to be supplied in whole feet lengths. Continuous identification markings, including the DLA contract delivery order number, NSN, and manufacturer details, must be applied via stamping or stenciling. Packaging and preservation must comply with MIL-STD-2073-1E and ASTM A700, with all markings following MIL-STD-129. Delivery is set for February 14, 2027, with the inspection and acceptance point located at the destination, the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Штаба сталева оцинкована з полімерним покриттям

Solicitation # UA-2026-11-06-009727-a

This solicitation, issued by the Branch Center for Construction and Installation Works and Operation of Buildings and Structures of JSC Ukrainian Railways, concerns the procurement of galvanized steel bars with a polymer coating. The contract falls under the classification for alloys and is managed by the Government of Ukraine, with the primary point of contact being Oleksiy Yevhenovych Zits. The solicitation was posted on November 6, 2026, with a response deadline set for November 10, 2026. Performance of the contract will take place within Ukraine at locations specified in the documentation. Interested parties can find further details and submit responses through the Prozorro electronic system using the provided solicitation number.

Філія «Центр будівельно-монтажних робіт та експлуатації будівель і споруд» Акціонерного товариства «Українська залізниця»

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Accessories Stowage Basket Fabrication and Supply

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Defense-Compliant Packaging and Crating ServicesThis subcontract for Defense-Compliant Packaging and Crating Services involves providing specialized packaging, marking, and palletization for prime contractors supporting DLA Weapons Support Land projects. The scope of work requires the processing of four hardware units using MIL-SPEC materials and industrial labeling equipment to ensure full compliance with ASTM D3951 packaging standards, MIL-STD-129 marking and labeling requirements, and RP001 DLA palletization guidelines. The completed units are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This opportunity is managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency, falling under NAICS code 488410. The response deadline for this requirement is November 19, 2026.

Motor Vehicle Towing

POSTED

DEADLINE

Manufacturing of Rigid Connecting Links (PN: A05-27895-000)This subcontract involves the manufacture of four finished and inspected rigid connecting links, part number A05-27895-000, for prime contractors supporting DLA Weapons Support Land projects. The fabrication process requires CNC milling and turning to ensure all components meet the technical and quality specifications outlined in the DLA Master List RA001. The contractor must adhere to strict regulatory standards, including the Buy American Act and the Berry Amendment for material sourcing, as well as NIST SP 800-171 cybersecurity standards. Performance will take place in New Cumberland, Pennsylvania, under the oversight of the Department of Defense.

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing technical testing services for prime contractors supporting DLA Weapons Support Land projects. The scope of work focuses on conducting First Article Testing on two units followed by Production Lot Testing to ensure quality conformance with the Technical Data Package. The successful contractor is responsible for delivering a First Article Test Report and validated results from the production lot testing. The project is managed under the Department of Defense and requires strict adherence to ITAR and EAR compliance, as well as JCP certification for necessary data access. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

Metal Casting and Tooling for Vehicular FendersThis subcontract involves the metal casting and tooling of 30 vehicular fenders for the Department of Defense, specifically supporting DLA Weapons Support Land projects. The selected provider is responsible for producing the fenders according to the specified Technical Data Package and must develop and maintain all necessary production tooling. Final deliverables include the finished fenders and a Certificate of Quality Compliance. To be eligible, contractors must hold JCP certification and adhere to ISO 9001 or SAE AS9003 quality standards, along with CMMC Level 2 compliance. The use of additive manufacturing is strictly prohibited for this project. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 331511.

POSTED

DEADLINE

Military-Grade Packaging and Palletization Services

Freight Transportation Arrangement

POSTED

DEADLINE

Back-up Ring (Preform) Supply

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

MIL-SPEC Opaque Packaging Supplier

Plastics Bag and Pouch Manufacturing

POSTED

DEADLINE

Nonmetallic Special Shaped Section Seal Manufacturer

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and International Shipping Services

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Plain Encased Seals (NSN 5330-00-492-1789)

Marking Device Manufacturing

POSTED

DEADLINE

Supply of MIL-DTL-46027 Compliant Raw MaterialsThis subcontract involves the sourcing and delivery of raw metals and alloys for prime contractors supporting DLA Weapons Support Land Supplier Opns Vehicle Spt projects. The supplier is responsible for providing materials that strictly adhere to the chemical and physical properties outlined in MIL-DTL-46027. Essential deliverables include material test reports, comprehensive traceability documentation, and certifications of conformance to ensure all materials are certified before delivery to the fabricator. The contract is designated as a Total Small Business Set-Aside under NAICS code 423510 and requires strict compliance with the Buy American Act and the Berry Amendment. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, to meet the requirements of the Department of Defense.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS