This Government Contract opportunity from Department Of Defense was posted on October 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

First Article and Production Lot Testing Services

Closed

Federal

Submission Closed10/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a fee-for-service subcontract to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, requiring a qualified industrial hygiene consultant to evaluate potential exposures for 27 students and instructors during activities such as masonry, grinding, and sand handling. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA action levels of 25 µg/m³ and permissible exposure limits of 50 µg/m³. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for dust control. Bids must be submitted via email to Wendy Lawrence by 3:00 PM EST on November 6, 2026. A complete proposal must include a bid sheet, a completed supplier packet with a W-9 and self-certification form, proof of insurance, and three references for similar projects. Evaluation is based on best value, focusing on the consultant's qualifications, technical sampling approach, and estimated schedule. The contract mandates compliance with Service Contract Labor Standards (WD#2015-4193 Rev 32) and various FAR regulations, including small business utilization and the protection of government interests for subcontracts exceeding $45,000. Award opportunities are open to various SBA-certified small business categories, including VOSB, SDVOSB, WOSB, and HUBZone.

POSTED

DEADLINE

Production Lot Testing and Quality ValidationThis subcontract for the Department of Defense DLA Weapons Support Fluid Handling Division involves performing production lot testing and quality validation for CUNI pipe flanges. The selected contractor will coordinate random sample selection with the Government QAR and execute tests according to the Technical Data Package to ensure quality conformance. Key deliverables include the preparation of DD Form 1222 and detailed certified test reports. The project is based in New Cumberland and falls under NAICS code 541380. Due to the handling of export-controlled technical data, the contractor must maintain CMMC Level 2 and JCP certifications. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing (FAT) Execution and ValidationThis subcontract, titled First Article Testing (FAT) Execution and Validation, is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The primary objective is to perform First Article Testing for prime contractors to validate the structural integrity of aerospace components. The scope of work includes coordinating the delivery of one test unit to the First Article Monitor at Tinker AFB, Building 469, and executing all necessary validation tests in accordance with FAR 52.209-4 requirements. The contractor is required to complete the validation process and deliver one validated First Article unit along with a comprehensive test approval report within 180 calendar days. The performance of these services will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, for this project categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services supports prime contractors under the DLA Weapons Support Aviation Supply Chain. The primary objective is to execute contractor testing in accordance with procurement note E03 to ensure that aviation-grade shear bolts comply with all required technical and material standards. The scope of work involves utilizing specialized laboratory equipment for material verification and culminates in the delivery of a formal Production Lot Test approval and certification report. The project is managed under NAICS code 541380 for the Department of Defense, with the place of performance located in Cherry Point. Interested parties should note the solicitation timeline, which includes a posted date of November 4, 2026, and a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract opportunity is for the provision of Production Lot Testing services to support prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The selected provider will be responsible for executing electrical integrity and performance verification for electrical cable assemblies. This process involves utilizing specialized equipment such as signal generators, continuity testers, and multimeters to ensure all components meet the specific DLA standards associated with the relevant National Stock Number. The scope of work concludes with the delivery of formal Production Lot Test certifications and detailed reports. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, for this requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing specialized verification testing for prime contractors on Navy aviation and ship projects. The scope of work includes conducting First Article Testing for process validation, Production Lot Testing for batch sampling, and Product Verification Testing as requested by the Contracting Officer. All operations must utilize NDI tools and stress-testing rigs that comply with DoD safety standards to deliver certified test reports and pass results. The opportunity is categorized under NAICS code 541380 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of December 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services supports prime contractors on projects for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work involves performing Production Lot Testing to verify assembly integrity and material properties in accordance with Reference QAP 97499 009671786-12019. These evaluations are conducted using calibrated load cells and tensile testing machinery to ensure all components meet strict government standards. The primary deliverable is the generation and delivery of certified formal test reports required for government acceptance of the production lot. The work is designated under NAICS code 541380 and is to be performed in Cherry Point, North Carolina. Interested parties should note the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

First Article Testing (FAT) for Rigid Connecting LinkThis subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, requires the performance of First Article Testing for a Rigid Connecting Link. The primary objective is to validate production processes for prime contractors by verifying material properties, dimensions, and overall performance. All testing must be conducted using CMM and metrology equipment to ensure strict adherence to Drawing 88277 C114649. The selected provider is responsible for documenting all test results in accordance with TDP Rev A Gen 2 to secure government approval. Final deliverables include the tested unit and a certified FAT report. The solicitation was posted on November 4, 2026, with a response deadline of November 16, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

ID 6592875 - DAERA - LMC - The provision of certification services to the Northern Ireland Beef and Lamb Farm Quality Assurance Scheme (NIBLFQAS)

Solicitation # ID 6592875

The Livestock and Meat Commission for Northern Ireland is seeking a provider for certification services for the Northern Ireland Beef and Lamb Farm Quality Assurance Scheme (NIBLFQAS). This scheme is essential for maintaining animal welfare, food safety, and environmental standards, which in turn supports market access for approximately 11,422 active participants. The scope of work includes the development and implementation of methodologies for farm assessment, certification, registration, and data collection and recording. The contract is particularly suitable for small and medium-sized enterprises. The estimated total value of the contract is 13,012,125.60 GBP including VAT. The initial term is for three years, starting on 1 April 2027 and ending on 31 March 2030, with options for two additional 12-month extensions through 31 March 2032. Award decisions will be based on a weighted combination of 70 percent qualitative criteria and 30 percent quantitative criteria. Tenders must be submitted electronically by 8 December 2026, with an enquiry deadline of 1 December 2026.

The Livestock and Meat Commission for Northern Ireland

POSTED

DEADLINE

Bus Line Manufacturing Inspection ServicesThis subcontract for Bus Line Manufacturing Inspection Services involves providing comprehensive pre-production, production line, and post-production inspections for Greater Dayton RTA transit bus projects. Work is performed at the Gillig LLC facility, ensuring compliance with Federal Motor Vehicle Safety Standards and APTA document BTS-II-RP-001-11. The selected provider must utilize digital photography to document defects and track their resolutions, delivering both individual vehicle inspection reports and weekly progress summaries. Qualified inspectors must possess at least five years of experience in bus maintenance or engineering. This opportunity is categorized under NAICS code 541380 and was posted by the Ohio Procurement agency. Interested parties must submit their responses by the deadline of December 2, 2026.

POSTED

DEADLINE

Radon and Asbestos Testing ServicesThis subcontract for Radon and Asbestos Testing Services supports prime contractors on projects managed by the Newport News Redevelopment and Housing Authority in Newport News, Virginia. The scope of work involves performing hazardous material testing and sampling, specifically focusing on radon testing within dwelling units and common areas, as well as conducting Asbestos-Containing Material surveys utilizing certified laboratory analysis. The selected provider must employ a state-certified asbestos inspector or tester and a certified radon professional to ensure compliance and accuracy. Key deliverables include the submission of certified radon testing results and comprehensive ACM survey reports. The solicitation was posted on November 4, 2026, with a response deadline of December 4, 2026, under NAICS code 541380.

Newport News Redevelopment and Housing Authority

POSTED

DEADLINE

Radiation Monitoring and Reporting ServicesThis subcontract for Radiation Monitoring and Reporting Services involves providing technical analysis of processed dosimetry badges for prime contractors working on San Mateo Medical Center projects. The selected provider will be responsible for determining radiation exposure levels, establishing monitoring frequencies, generating formal reports, and issuing necessary exposure notifications. These tasks require the use of specialized radiation detection laboratory equipment and secure data systems to ensure accurate tracking and reporting. To qualify for this engagement, the contractor must maintain CDPH_RHB laboratory certification and strictly adhere to HIPAA compliance standards. Key deliverables include the submission of formal reports and the maintenance of a record retention database. The solicitation was posted on November 4, 2026, with a response deadline of November 25, 2026, under NAICS code 541380.

Health - SMMC

POSTED

about 8 hours ago

DEADLINE

in 21 days

AI Contract Overview

This subcontract for First Article and Production Lot Testing Services supports prime contractors on DLA Aviation aerospace projects under the Department of Defense. The scope of work involves performing independent inspection and testing, specifically conducting 100 percent dimensional characteristics checks and preparing First Article Reports in accordance with DI-NDTI-80809B or MIL-HDBK-831 standards. The contractor is required to utilize CMM and optical comparators to validate Critical Safety Item requirements. Key deliverables for this engagement include the submission of First Article Inspection Reports and Production Lot Test Reports. The opportunity is categorized under NAICS code 541380 and is managed by the ASC Commodities Division.

General Info

Subcontract for DLA Aviation aerospace inspection, testing, and First Article Report preparation services.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-Q-0443.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BELLCRANK ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 14

subcontract

Response DeadlineOct 28

Deadline has passed

Submission Closed

10/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Performs independent inspection and testing for prime contractors on DLA Aviation aerospace projects. Conducts 100% dimensional characteristics checks and prepares First Article Reports per DI-NDTI-80809B or MIL-HDBK-831. Utilizes CMM and optical comparators to validate Critical Safety Item (CSI) requirements. Delivers First Article Inspection Reports (FAIR) and Production Lot Test Reports.