Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, June 24 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

This Government Contract opportunity from Department Of Commerce was posted on May 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

First Article Load Testing & Inspection

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Geotechnical Laboratory Soil TestingThe contract involves conducting comprehensive geotechnical laboratory testing on soil samples, including analyses such as grain size distribution, Atterberg limits, moisture content, density, swell potential, and soil classification following USCS and AASHTO standards. These tests are critical for assessing soil properties and behavior, supporting infrastructure projects managed by the Tennessee Department of Transportation (TDOT). The work is designated as a subcontract under NAICS code 541380, which pertains to testing laboratories. The contract is posted with a deadline for responses on June 26, 2026, and the laboratory testing will be performed primarily in the Maury area. No specific set-aside designation or organization type is specified. The solicitation is managed by TDOT, and the project documentation and proposal submission details are accessible through the TDOT bidding platform.
TDOT

POSTED

in 10 days

DEADLINE

in 10 days
NAICS: 541380
New
SLED
Third-Party Testing and Quality AssuranceThis contract involves performing independent testing and quality assurance services for materials and construction processes related to a project overseen by the Tennessee Department of Transportation (TDOT). The contractor is responsible for conducting thorough tests and delivering detailed reports within specified timelines to CSX for evaluation and approval. This ensures compliance with required standards and supports the overall integrity and safety of the construction work. The solicitation, titled "Third-Party Testing and Quality Assurance," is a subcontract opportunity identified by the NAICS code 541380, which pertains to testing laboratories. The work is to be performed in Davidson, Tennessee. Proposals were due on June 26, 2026, aligning with the posted date, indicating a tight response window. The contract emphasizes the importance of independent verification to maintain quality control throughout the construction process.
TDOT

POSTED

in 10 days

DEADLINE

in 10 days
NAICS: 541380
New
SLED
Construction Materials Testing and InspectionThis contract involves subcontracting third-party testing and inspection services for construction materials, specifically concrete and structural steel, to ensure compliance with the standards set by the Tennessee Department of Transportation (TDOT) and CSX. The primary focus is on verifying the quality and safety of these materials used in construction projects located in Sullivan, Tennessee. The contract falls under the NAICS code 541380, which covers testing laboratories, and it was posted and set with a response deadline on June 26, 2026. The Tennessee Department of Transportation is overseeing the contract, although specific details about the office address and point of contact are not provided. Interested parties are directed to submit proposals by the deadline through the TDOT bidding portal. This subcontract aims to support the integrity and regulatory compliance of infrastructure projects in the region.
Tennessee Department of Transportation

POSTED

in 10 days

DEADLINE

in 10 days
NAICS: 541380
New
SLED
Intelligent Compaction (IC) ServicesThis contract requires the provision and operation of an Intelligent Compaction (IC) system during asphalt placement projects in Sequatchie. The IC system must monitor compaction in real time, producing color-coded maps that visually represent the compaction progress and quality. Additionally, the collected data is required to be uploaded daily to cloud storage to ensure compliance with Tennessee Department of Transportation (TDOT) standards and facilitate ongoing project oversight. The solicitation, identified under the NAICS code 541380, is a subcontract opportunity issued by TDOT with a response deadline of June 26, 2026. Although specific organizational qualifications or set-aside provisions are not mentioned, the contractor must have the capability to deliver both the technology and operational expertise to support advanced asphalt compaction monitoring. The place of performance is Sequatchie, Tennessee, emphasizing the local application of this technology in TDOT infrastructure projects.
TDOT

POSTED

in 10 days

DEADLINE

in 10 days
NAICS: 541380
New
SLED
Intelligent Compaction (IC) Monitoring and ReportingThe contract involves providing real-time monitoring and reporting of compaction data during Hot Mix Asphalt (HMA) paving operations using Intelligent Compaction (IC) certified equipment. The key requirement is the integration of this data with the Tennessee Department of Transportation’s (TDOT) Electronic Technical Automation System (ETAS) to ensure seamless data exchange and enhanced project oversight. The subcontract focuses on the use of advanced technology to improve paving quality and operational efficiency. This opportunity is issued by the Tennessee Department of Transportation, with the place of performance specified as Grundy. The contract is categorized under NAICS code 541380, which relates to testing laboratories, indicating a technical and specialized service scope. The solicitation and response deadlines both fall on June 26, 2026, emphasizing prompt submission from interested subcontractors. Overall, this contract is targeted at firms equipped with IC technology and capable of integrating their systems with TDOT’s platforms to support infrastructure projects.
Tennessee Department of Transportation

POSTED

in 10 days

DEADLINE

in 10 days

AI Contract Overview

Show more

The contract involves conducting a structural pressure test on the first article hull by applying a load of 9,000 pounds for a duration of five minutes. The primary objectives are to inspect the hull for any signs of deformation or cracking during and after the test and to certify that the hull meets compliance standards. This subcontract is designated as a Total Small Business Set-Aside under the SBA guidelines (FAR 19.5), emphasizing opportunities for small business participation. Issued by the Department of Commerce, specifically through NOAA, the work is to be performed at the Stennis Space Center location with the relevant NAICS code being 541380, which covers engineering services. The solicitation was posted on May 4, 2026, and responses are due by May 8, 2026, at 4:00 PM. The contract focuses on ensuring structural integrity and compliance through rigorous testing and inspection to support the development and certification of the hull.

General Info

Conduct 9,000-pound structural hull pressure test for five minutes, inspect for damage, certify compliance.

Agency

Department Of Commerce Noaa

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Stennis Space Center, MS, 39529, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Commerce Noaa
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Commerce Noaa
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Conduct structural pressure testing of the first article hull under 9,000 lbs load for 5 minutes, inspect for deformation or cracking, and certify compliance.