Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

First Article Test (FAT) and Quality Validation

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.
University of Massachusetts System

POSTED

about 9 hours ago

DEADLINE

in 21 days
NAICS: 541380
New
SLED
Campus Consulting – Construction Materials Testing And Special Inspection Services
Solicitation # 20261026019
California State University, Chico

POSTED

about 14 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
Federal
MIL-STD Environmental Testing ServicesThe MIL-STD Environmental Testing Services subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves performing critical environmental qualification testing for prime contractors. The scope of work focuses on aircraft interior decontamination projects for the Joint Project Manager for CBRN Special Operations Forces. The selected provider will conduct chamber evaluations and environmental stress testing, utilizing temperature, humidity, and vibration chambers to verify equipment survival in austere environments. All testing activities must strictly adhere to MIL-STD-810H standards, with the final deliverable being comprehensive environmental qualification test reports. This opportunity falls under NAICS code 541380 and is designated for performance in Abell. The response deadline for this requirement is November 24, 2026.
W6QK Acc-Apg

POSTED

about 16 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
Federal
Specialized Aerospace Quality Inspection/Certification
Ok DLA Aviation At Oklahoma City

POSTED

about 16 hours ago

DEADLINE

in about 16 hours
NAICS: 541380
New
Federal
AMS Designated Laboratory Meat Testing Services (ADL)
Solicitation # 12-1NTS-26-R-0002
The USDA Agricultural Marketing Service (AMS) is soliciting proposals under solicitation 12-1NTS-26-R-0002 to establish AMS Designated Laboratories (ADLs) for microbiological and fat testing of meat, poultry, egg, and aquatic products. This effort supports the National School Lunch Program and other federal nutrition assistance programs to ensure compliance with Federal Purchase Program Specifications. The government intends to award a Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract with a base period from April 1, 2027, through March 31, 2028, and four subsequent option periods, extending the total performance period to March 31, 2032. The contract has a guaranteed minimum of 10,000 dollars and a maximum ceiling of 15,000,000 dollars. This procurement is specifically set aside for Women-Owned Small Businesses (WOSB). Selected laboratories must maintain ISO/IEC 17025:2017 accreditation and utilize approved methods from FSIS MLG, AOAC, or AOCS. Key responsibilities include conducting analyses for Aerobic Plate Count, Total coliforms, Generic E. coli, and Salmonella, as well as providing sampling procedures and shipping supplies to vendors. Contractors are required to provide timely reporting of results, daily status reports, and statistical process control data. Proposals will be evaluated based on Best Value, considering technical capabilities, past performance with at least two references from the last five years, and price. All submissions must be uploaded in PDF format via WBSCM by the deadline of November 20, 2026.
USDA Ams 3J14

POSTED

about 16 hours ago

DEADLINE

in 24 days
NAICS: 541380
New
Federal
Granite Surface Plate Calibration and lapping - with Q&As
Solicitation # W519TC27QA007
Solicitation W519TC27QA007, issued by the Army Contracting Command - Rock Island, seeks an ISO 17025 accredited vendor to provide annual inspection, calibration, and lapping repair for granite surface plates at the Rock Island Arsenal Joint Manufacturing and Technology Center. The requirement is structured as a firm-fixed-price contract consisting of a base year from February 2, 2027, to February 1, 2028, with four subsequent option years, for a total potential duration of five years and six months. All work must be performed in accordance with ASME B89.3.7 and ANSI Z-540-1 standards, with calibrations traceable to NIST. The contract utilizes a hybrid pricing model where the annual inspection and calibration of all plates are firm-fixed-price lots, while lapping repairs are priced separately via an hourly labor rate and must be authorized by the Contracting Officer or COR. Estimated travel costs should be included in the firm-fixed pricing, though actual costs will be billed after service per Joint Travel Regulation rates. Deliverables include calibration stickers for each plate and a Service Acceptance Report submitted within three business days of completion. Offerors must submit their proposals by November 9, 2026, including a signed concurrence of the Scope of Work and documentation of their technical capabilities.
W6QK Acc-Ri

POSTED

about 16 hours ago

DEADLINE

in 12 days
NAICS: 541380
New
Federal
B--METAGENOMICS & TRANSCRIPTOMIC SERVICES
Solicitation # 140G0226Q0145
Solicitation 140G0226Q0145 is a firm-fixed-price Blanket Purchase Agreement (BPA) issued by the USGS OAG Denver Acquisition Branch to provide next-generation sequencing (NGS) services for the Upper Midwest Water Science Center’s Michigan Bacteriological Research Laboratory. The scope of work includes shotgun metagenomics, whole genome sequencing (WGS), and RNA-sequencing (RNA-seq) to support research on bacterial pathogens, antibiotic resistance, and microbial ecology. The contract utilizes technologies such as Illumina, AVITI, Oxford Nanopore, and PacBio. The BPA has a total not-to-exceed value of $300,000.00 and a five-year period of performance from September 28, 2026, to September 27, 2031, with specific performance periods defined by individual call orders. This opportunity is set aside for Women-Owned Small Businesses (WOSB) and Economically Disadvantaged Women-Owned Small Businesses (EDWOSB). Award decisions are based on the most advantageous offer, where non-priced technical factors—specifically past performance, key personnel qualifications, and the capability to provide the required sequencing deliverables—are significantly more important than cost. Deliverables must meet strict quality standards, including a 75% quality score over 30 per sequencing run, and be delivered via secure FTP or external hard drive with comprehensive technical metadata. Payments are processed electronically through the Treasury’s Invoice Processing Platform (IPP), and the place of performance is located in Lansing, Michigan.
Ofc Of Acquisition Grants-Denver

POSTED

about 16 hours ago

DEADLINE

in 7 days
NAICS: 541380
New
International
W684Q-264141 - Laboratory Testing - RFSO
Solicitation # WS5609648156
The Government of Canada, through the Department of Public Works and Government Services, has issued solicitation WS5609648156 for laboratory testing services. This federal opportunity, identified as W684Q-264141, falls under NAICS code 541380 and specifies that the place of performance will be located in British Columbia, Canada. The solicitation was posted on October 27, 2026, with a response deadline set for November 4, 2026, at 7:00 PM. Interested parties may coordinate with the primary contracting authority, Nicki Arrieta, to facilitate their submissions.
Department of Public Works and Government Services

POSTED

about 23 hours ago

DEADLINE

in 8 days
NAICS: 541380
New
SLED
Ultrasonic Rail Testing and Material CertificationThis subcontract for Ultrasonic Rail Testing and Material Certification involves providing independent third-party testing and certification services for prime contractors working on Maryland Transit Administration projects. The selected vendor must be an MTA-approved certified independent testing laboratory capable of performing 100 percent in-line ultrasonic testing across the full length of rails. This technical process requires the use of a computerized DAPCO 300 testing unit or an approved equivalent to ensure material integrity. The contractor is responsible for delivering formal certified test reports and certificates of compliance to verify that all rail materials meet the necessary standards. Interested parties must submit their responses by November 16, 2026, under NAICS code 541380.
Maryland Transit Administration

POSTED

1 day ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Concrete Field TestingThis subcontract opportunity involves providing quality assurance testing for prime contractors working on California Department of Transportation highway projects. The primary scope of work focuses on conducting field testing of concrete pours to verify strength and ensure strict adherence to mix compliance standards. The selected provider is responsible for delivering certified test reports to document these findings. To qualify for this engagement, the contractor must employ a certified ACI Grade 1 concrete field-testing technician. Interested parties must submit their responses by December 3, 2026, in accordance with the solicitation posted on October 26, 2026. The project falls under NAICS code 541380.
California Department of Transportation

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Laboratory Ventilation Testing and CertificationThis subcontract opportunity is for Laboratory Ventilation Testing and Certification to support prime contractors on San Francisco Unified School District facility projects. The selected provider will perform specialized testing and official certification of both new and existing bio-safety cabinets and laboratory fume hoods. Using smoke generators and airflow velocity meters, the contractor must verify proper containment and airflow, ultimately providing official certification labels and detailed reports for every unit tested. The project is managed by the San Francisco Unified School District Facilities Design and Construction Department and will be performed in San Francisco, California. Qualified bidders must possess certification authority recognized by local and California state agencies. The solicitation was posted on October 26, 2026, with a response deadline of November 12, 2026.
San Francisco Unified School District Facilities Design and Construction Department

POSTED

1 day ago

DEADLINE

in 16 days
NAICS: 541380
New
International
Vehicle Compliance Testing & InspectionThe Vehicle Compliance Testing and Inspection subcontract involves providing essential legal testing and safety inspections for prime contractors delivering vehicles to School District 68 Nanaimo-Ladysmith in British Columbia, Canada. The scope of work includes conducting safety inspections, weight distribution checks, and legal compliance certifications from the point of initial receipt through final acceptance. These services must be performed using appropriate weigh scales and safety tools to ensure all requirements mandated by law under Section 3.3 are met. The selected provider is responsible for delivering all necessary inspection reports and certifications to verify compliance. This opportunity is categorized under NAICS code 541380 and is associated with the Province of British Columbia. Interested parties should note the response deadline of November 26, 2026.
School District 68 Nanaimo-Ladysmith

POSTED

1 day ago

DEADLINE

in 30 days

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense Fluid Handling Division, requires the performance of First Article Testing and quality validation for prime contractors delivering DLA and Navy supply contracts. The scope focuses on validating production processes for NSN 5330014456947 through sampling methods aligned with MIL-STD-1916 or ASQ H1331 to ensure zero non-conformance. The selected provider must deliver a comprehensive FAT Report and a Certification of Compliance. To qualify, contractors must possess ISO 17025 or SAE AS9003 certification and utilize specialized physical and chemical testing equipment. This opportunity is a total small business set-aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Responses are due by September 14, 2026.

General Info

DoD subcontract for First Article Testing of NSN 5330014456947 in New Cumberland, PA.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M4-26-T-381S.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GASKET

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs First Article Testing (FAT) and quality validation for prime contractors delivering DLA/Navy supply contracts. Validates production processes for NSN 5330014456947 using sampling methods per MIL-STD-1916 or ASQ H1331 to verify zero non-conformance. Requires ISO 17025 or SAE AS9003 certification and specialized physical/chemical testing equipment. Delivers FAT Report and Certification of Compliance.

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 331210
New
DIBBS
Aerospace Grade Metal Tubing SupplyThis subcontract, managed by the Fluid Handling Division of the Department of Defense, involves the supply of aerospace grade raw metal tubing for prime contractors working on DLA Land and Maritime aircraft engine projects. The required tubing must feature a 1.250 inch outer diameter and a 0.035 inch wall thickness, strictly adhering to GE Drawing 1296M75 Rev N. Performance for this contract takes place at Tinker AFB. To ensure quality for critical application items, the supplier must provide full material certifications and Mill Test Reports. Additionally, all delivered stock must comply with the Buy American Act. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026, under NAICS code 331210.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 336413
New
DIBBS
Precision Aerospace Tube FabricationThis subcontract through the Department of Defense Fluid Handling Division requires the manufacture of 13 precision metal tube assemblies for DLA Land and Maritime aircraft engine projects. The fabrication must adhere to General Electric Drawing 1296M75 Rev N and Specification P3TF19-S2, specifically producing tubes with a 1.250 inch outer diameter and a 0.035 inch wall. Performance will take place at Tinker AFB. Eligible contractors must possess precision tube bending equipment and hold either SAE AS9003 or ISO 9001 certification. Additionally, the provider must be a prequalified source or secure approval from the Government Design Control Activity. The response deadline for this opportunity is October 28, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 332710
New
DIBBS
Supply of Tube and Fittings, MThis subcontract involves the supply of 3,000 units of specialized tubes and fittings for prime contractors supporting Department of Defense supply contracts. Managed by the Fluid Handling Division, the contract requires all materials to be manufactured or sourced in strict accordance with NSN 013156793, FSC 4710, and specific DLA Technical and Quality Requirements. Performance will take place at Tinker AFB. The provider is responsible for preparing all items for Government-Arranged Transportation under the First Destination Transportation program. Additionally, the contractor must maintain strict cybersecurity compliance, adhering to NIST SP 800-171 and DFARS 252.204-7012 standards. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026.
Machine Shops

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 332999
New
DIBBS
Supply of Bypass Tubes (NSN 4320007909742)This subcontract involves the manufacture or sourcing of six bypass tubes identified by NSN 4320007909742 for the Department of Defense Fluid Handling Division. The components must meet exact technical specifications and are intended for prime contractors operating under Defense Logistics Agency supply contracts. Performance will take place at Hill AFB, with the final units packaged for Government-Arranged Transportation. The contractor is required to maintain strict cybersecurity standards, ensuring full compliance with NIST SP 800-171 and DFARS 252.204-7012 to safeguard covered defense information. This procurement falls under NAICS code 332999, with a response deadline set for October 28, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 333914
New
DIBBS
FILTER BODY, FLUID
Solicitation # SPE7M4-27-T-0110
Solicitation SPE7M4-27-T-0110 is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two fluid filter bodies, identified by NSN 4330-01-517-6934 and PTI Technologies Inc. part number 7594170-001. This critical application item is categorized under NAICS 333914. The required delivery date is December 20, 2026, with a need ship date of October 6, 2026, and a delivery timeframe of 104 days after order. Delivery is FOB Origin, with the destination for both inspection and acceptance being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic payment requests and receiving reports. Offerors must submit quotes via the DLA Internet Bid Board System and comply with the Buy American and Balance of Payments Program, as well as specific cybersecurity and safeguarding regulations for covered defense information.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 331210
New
DIBBS
TUBE AND FITTINGS, M
Solicitation # SPE7M4-26-T-8102
Solicitation SPE7M4-26-T-8102 is issued by the Department of Defense Fluid Handling Division for the procurement of three metallic tubes and fittings, identified by NSN 4710-01-315-6793. The requirement is not a small business set-aside and falls under NAICS code 331210. Delivery is required within 248 days after the date of order, with a target delivery date of November 27, 2026, to the DLA Distribution Depot Oklahoma at Tinker AFB. The procurement is managed under the First Destination Transportation program with FOB Origin terms, and both inspection and acceptance will occur at the destination per FAR 52.246-2. Compliance requirements include adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 for packaging. All shipments must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 standards. The contract mandates strict cybersecurity compliance, requiring a CMMC Level 2 self-assessment and the posting of NIST SP 800-171 summary scores in the Supplier Performance Risk System. Additionally, the Buy American and Balance of Payments Program applies to quotes above the micro-purchase threshold, and the use of additive manufacturing processes is prohibited unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 334513
New
DIBBS
INDICATOR ASSEMBLY
Solicitation # SPE7M4-26-T-448G
Solicitation SPE7M4-26-T-448G is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of one Indicator Assembly, identified by NSN 6695-996798615 and Mission Systems Wimborne Limited part number 3415271. The requirement falls under NAICS code 334513. The item is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a need ship date of March 23, 2027, and an original required delivery date of March 17, 2028. Delivery is expected within 165 days after order. The contract mandates strict adherence to quality and technical standards, including CMMC Level 2 Self-Assessment and the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will occur at the origin per FAR 52.246-2, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Offerors must submit quotes via the DIBBS system and comply with the Buy American Act and Berry Amendment. Payment will be processed electronically through the Wide Area WorkFlow system.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 333914
New
DIBBS
TUBE, BYPASS
Solicitation # SPE7M4-26-T-6863
Solicitation SPE7M4-26-T-6863 is a federal procurement issued by the Department of Defense Fluid Handling Division for six units of bypass tubes, identified by NSN 4320-00-790-9742. The requirement is managed under the First Destination Transportation program with a delivery timeframe of 168 days, targeting a need ship date of August 18, 2026, and a final required delivery date of November 10, 2026. Performance and delivery are set for Hill AFB, Utah, with inspection and acceptance occurring at the destination. The procurement is not a small business set-aside and falls under NAICS code 333914. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Offerors proposing alternate parts must provide a complete data package for evaluation. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessments is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Award evaluation may include a price preference for HUBZone concerns, while items produced via additive manufacturing are ineligible for award unless specifically authorized.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-393G
Solicitation SPE7M4-26-T-393G is a fixed-price procurement for 660 units of a commercial gasket, identified as a critical application item under NSN 5330005657096. The requirement specifies Parker-Hannifin Corporation part numbers 3387007 and BACG10BK256G, adhering to reference drawing 81205 BACG10BK Revision C. The items must be free of asbestos per FED-STD-313 and comply with MIL-STD-130N for identification marking. Delivery is required within 18 days after order, with a need ship date of October 10, 2026, and a final delivery date of March 31, 2027, to the DLA Distribution Depot at Tinker AFB, Oklahoma. Quality assurance is governed by destination inspection and acceptance, utilizing sampling methods from MIL-STD-1916 or ASQ H1331. Packaging must follow MIL-STD-2073-1E and RP001, specifically requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent ultraviolet ray deterioration. The contract incorporates various FAR and DFARS clauses, including those for equal opportunity, subcontracts for commercial products, and safeguarding covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-190E
Solicitation SPE7M4-26-T-190E is a small business set-aside issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 13 metal tube assemblies. These components are identified as critical application items for the F110-GE-100 aircraft engine and are designated as restricted source items, requiring engineering source approval by the Government Design Control Activity. The items must be manufactured according to General Electric Drawing 1296M75 Rev N and Specification P3TF19-S2, with a specific requirement to use paragraph 3.4.1, part C instead of part B. The delivery is set for 316 days after order, with a required delivery date of May 12, 2027, shipped FOB Origin to Tinker AFB, Oklahoma. The contract mandates strict quality and compliance standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the destination based on conformance to the specified drawings and standards. Key regulatory requirements include CMMC Level 2 Self-Assessment, safeguarding of covered defense information per DFARS 252.204-7012, and adherence to the Buy American Act. Packaging must comply with RP001 and MIL-STD-129, and all invoicing must be processed electronically through Wide Area WorkFlow. The procurement falls under NAICS code 332996.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-27-T-0040
Solicitation SPE7M3-27-T-0040, issued by the DLA Land and Maritime Fluid Handling Division, seeks quotes for five bronze pipe elbows with a 3/8 inch pipe size (NSN 4730-00-142-1190). The required delivery date is March 15, 2027, with a delivery period of 150 days after order. Shipping is FOB Origin, with inspection and acceptance occurring at the destination in New Cumberland, Pennsylvania. The successful contractor must provide one copy of a Certificate of Quality Compliance and adhere to specific technical data including Basic Drawing NR 80064 1385941 Revision H and Reference QAP 13873. This procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-control training. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, specifically prohibiting mercury compounds. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system. Additionally, the solicitation includes a price evaluation preference for SBA-certified HUBZone small businesses and prohibits the use of additive manufacturing unless specifically approved by the Contracting Officer.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

4 days ago

DEADLINE

in about 13 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) and Quality Validation
ASC COMMODITIES DIVISION

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Production Lot Testing (PLT) Services
FLUID HANDLING DIVISION

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing and Reporting for NSN 014795026
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) and Product Verification Testing (PVT)
LAND SUPPLY CHAIN

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
DIBBS
Production Lot Testing and Analysis
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) and Product Verification Testing (PVT)
LAND SUPPLY CHAIN

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing and Validation
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) for Aircraft Window Panel
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) for NSN 1560-01-003-3728
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Government First Article Test (FAT) Services
ASC COMMODITIES DIVISION

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Test (FAT) and Certification
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Test (FAT) Execution
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS