Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Test (FAT) for Precision Fasteners

Open

Federal

Response Deadline11/13/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves performing First Article Testing for precision fasteners delivered via DLA supply contracts. The scope of work requires the verification of material properties, dimensions, and locking functionality using specialized equipment such as tensile testers, hardness testers, and metrology tools to validate technical data. The selected provider may be required to hold ISO/IEC 17025 laboratory certification to ensure testing standards are met. The primary deliverables for this engagement include comprehensive test reports, FAT Certification, and approved first-article samples. Performance will take place in Tracy, California, under NAICS code 541380. Interested parties must adhere to the response deadline of November 13, 2026.

General Info

DoD subcontract for precision fastener First Article Testing in Tracy, California by 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-9907.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, SELF-LOCKING, PLATE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 AM PSTin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors delivering DLA supply contracts. Verifies dimensions, material properties, and locking functionality of precision fasteners. Utilizes metrology, hardness testers, and tensile testers to validate technical data. May require ISO/IEC 17025 laboratory certification. Delivers FAT Certification, test reports, and approved first-article samples.

Similar Contracts

Same NAICS industry code

Government Fit Verification Testing ServicesThe Government Fit Verification Testing Services subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the performance of First Article testing for prime contractors. The primary objective is to evaluate the form, fit, and function of gaskets on the next higher assembly to ensure operational compatibility. This process involves conducting fit verification testing and utilizing precise measurement tools to document results. The selected provider will be responsible for generating and submitting formal first article exhibits and comprehensive test reports that confirm the fit and function of the components. The work is to be performed at Tinker AFB, and the solicitation is categorized under NAICS code 541380. Responses for this opportunity are due by November 21, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Quality Control (QC) and Material Testing ServicesThis subcontract for Quality Control (QC) and Material Testing Services supports prime contractors on projects for the Oil & Gas Development Company Limited (OGDCL) in Pakistan. The scope of work involves performing physical inspections and technical testing of materials, including field tests for soil and concrete, Non-Destructive Testing (NDT) on welds, and the verification of material mill certificates. The service provider is responsible for delivering formal Material Test Reports and QC Pass/Fail Certificates to ensure project standards are met. To qualify for this engagement, personnel must hold specialized certifications, specifically Certified Welding Inspector (CWI) or NDT Level II/III credentials. Interested parties must submit their responses by November 23, 2026, in accordance with the solicitation posted on November 7, 2026. The contract falls under NAICS code 541380, focusing on industrial testing and quality assurance within the oil and gas sector.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 10 hours ago

DEADLINE

ELITE/AIHA Accredited Legionella Laboratory TestingThis subcontract provides off-site laboratory analysis for prime contractors working on California Department of General Services facility projects. The scope of work focuses on the enumeration of Legionella in accordance with ISO 11731 standards, including Identification Serogroup testing for all positive results. To ensure quality and compliance, the performing laboratory must hold both ELITE and AIHA EMLAP certifications. Analytical reports and test results are to be delivered electronically via email to the FMD Contract Administrator. This opportunity falls under NAICS code 541380 and is associated with the California Department of General Services, with a response deadline set for November 23, 2026.

California Department of General Services

POSTED

about 18 hours ago

DEADLINE

25-282903.FMD.StatewideLegionellaTesting

Solicitation # CR-25-282903

The California Department of General Services, Facilities Management Division (FMD) is soliciting bids for statewide Legionella sample collection, laboratory testing, analysis, and reporting for state-owned buildings and grounds. Operating across the Northern, Bay, and Southern regions, the contractor will provide as-needed routine and investigative sampling of domestic and non-potable water systems. Key deliverables include off-site laboratory analysis using a provided Chain of Custody Form, with results emailed within 48 hours of receipt and final survey reports submitted within 15 working days. All laboratories must be ELITE certified and AIHA Environmental Microbiology accredited, and testing must adhere to ISO 11731 standards. Final reports must be provided in a room-by-room format and signed by a Certified Industrial Hygienist (CIH). The contract will be awarded to the lowest responsive and responsible bidder, with a 3% Disabled Veteran Business Enterprise (DVBE) participation goal. Qualified personnel must include a Competent Professional and a Competent Technician as defined by the AIHA Technical Framework: Legionella (2020), and a CIH certified through the Board of Global Credentialing. Bidders must maintain significant insurance coverage, including $1,000,000 for Commercial General Liability, Pollution Liability, and Professional Liability. Performance is subject to prevailing wage rates and California Building Standards Code. Emergency service requests require a response within two hours. Payments are governed by Government Code Chapter 4.5, and a one-year warranty is required from the date of acceptance.

California Department of General Services

POSTED

about 18 hours ago

DEADLINE

Construction Materials Testing & InspectionThis subcontract for Construction Materials Testing and Inspection involves providing specialized materials testing and on-site construction observation for prime contractors working on Sunrise Water Authority projects. The scope of work includes conducting field testing for asphalt, soil, and concrete, as well as reviewing RFIs and submittals. All activities must be performed using specialized equipment and adhere to the standards set by the City of Happy Valley, Clackamas County, ODOT, and the Sunrise Water Authority. The selected contractor is responsible for delivering comprehensive inspection logs, material test reports, and certifications of compliance. This opportunity is categorized under NAICS code 541380 and is located in Alley, Oregon. Interested parties must submit their responses by the deadline of December 11, 2026.

Sunrise Water Authority

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Designated Substances Survey (DSS)This subcontract involves providing specialized sampling and analysis for hazardous materials on behalf of prime contractors for the Government of Ontario Ministry of Energy and Mines. The primary objective is to conduct Designated Substances Surveys across eight different mine sites to identify the presence of asbestos, lead, and PCBs. The selected provider must employ a certified hazardous materials surveyor and ensure all activities maintain strict compliance with the Occupational Health and Safety Act. The final deliverable for this engagement consists of comprehensive Designated Substances Survey reports for each of the eight designated sites.

Energy and Mines

POSTED

about 22 hours ago

DEADLINE

Electrical Testing and Commissioning AgentThis subcontract opportunity is for an Electrical Testing and Commissioning Agent to provide independent testing and commissioning services for prime contractors on Maryland Department of Transportation Maryland Transit Administration traction power substation projects. The scope of work includes conducting insulation and winding resistance testing for motors, power factor testing for transformers, and resistance-to-ground testing for switchboards. Additionally, the agent is responsible for performing grounding and bonding certification as well as functional performance verification. The selected contractor must deliver certified test reports and Commissioning Issues Resolution Logs to ensure project compliance. This opportunity falls under NAICS code 541380 and was posted on November 6, 2026, with a response deadline of November 19, 2026.

POSTED

about 23 hours ago

DEADLINE

Comprehensive Pest Control Services (Insect and Vertebrate)This subcontract for Comprehensive Pest Control Services involves providing extermination and control for both insects and vertebrates at the Fairview Developmental Center in Orange, California. Working under prime contractors for the California Department of Developmental Services, the selected provider will manage a wide array of pests, including rodents, birds, bees, wasps, and various crawling and flying insects. Services are delivered through a combination of established monthly schedules and a mandatory four-hour emergency response time to ensure a pest-free environment. To qualify for this engagement, contractors must hold a Structural Pest Control Board License and a California Qualified Applicator License. Key deliverables include the successful eradication and control of target pests and the submission of completed Inspection Checklists. The solicitation was posted on November 6, 2026, with a response deadline of November 30, 2026.

California Department of Developmental Services

POSTED

about 24 hours ago

DEADLINE

Quality Assurance Representative (QAR) Support/InspectionThis subcontract opportunity is for Quality Assurance Representative support and inspection services benefiting the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament. The selected provider will perform specialized quality inspections and verifications for prime contractors, specifically focusing on critical gun parts and military-grade gun mounts. Work is conducted at the manufacturer's facility using precision measurement tools to ensure all unique requirements are met prior to formal acceptance or rejection. All activities must adhere strictly to DLA and DoD Quality Assurance Representative standards, culminating in the delivery of detailed inspection reports. The place of performance is located in Fort Campbell, Kentucky. Interested parties should note the response deadline of November 16, 2026, for this effort categorized under NAICS code 541380.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article Test (FAT) ServicesThis subcontract opportunity is for First Article Testing services supporting the DLA Weapons Support Land Supply Chain. The selected provider will validate manufacturing processes for prime contractors by testing sample units against the technical data package using strength testing and metrology equipment. A formal test report must be delivered within 30 calendar days of the contract date. The project is a total small business set-aside under NAICS code 541380, with performance located in New Cumberland. Due to the nature of the work, the contractor must maintain ITAR and EAR compliance as well as CMMC Level 2 certification. Responses are due by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Dimensional Inspection and FAT ValidationThis subcontract opportunity, titled Aerospace Dimensional Inspection and FAT Validation, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing dimensional verification and quality assurance services for prime contractors, specifically focusing on the validation of First Article Tests and production lots. Work is performed at Tinker AFB and requires the use of CMM or optical comparators to ensure compliance with ASME Y14.31 and MIL-STD-1916 standards, including the verification of Digital Mylar data and grid unit tolerances. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380. To be eligible, providers must maintain ISO 9001:2015 certification and are responsible for delivering detailed inspection reports and certifications of conformance. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Third-Party Quality Inspection and Certification (Zero-Based Sampling)This subcontract for Third-Party Quality Inspection and Certification involves providing independent inspection and acceptance services at the origin for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the execution of zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to verify bare item marking and close tolerance specifications. To ensure accuracy, the contractor must utilize precision measurement tools such as optical comparators or CMM and deliver formal certification of acceptance along with detailed inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 541380. Performance of these services will take place at Robins Air Force Base. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Shoulder Screw Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 371 shoulder screws, identified by NSN 5305017223405, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. All hardware must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. Strict adherence to technical and quality standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. Additionally, the provider must maintain a quality management system compliant with either SAE AS9003 or ISO 9001. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

Spring (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Supply of Plain Cap Nuts (NSN 5310-01-3490759)This subcontract involves the manufacture or procurement of 2,757 plain cap nuts under NSN 5310-01-3490759 for prime contractors supporting Department of Defense projects. These components are designated as Critical Application Items and must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract is managed by the DLA Weapons Support ASC Commodities Division with performance located in Texarkana. To be eligible, the provider must maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supply of Self-Locking Nuts (NAS1758)This HUBZone set-aside subcontract, managed by the Department of Defense DLA Weapons Support ASC Commodities Division, involves the supply of 1,841 double self-locking nuts with extended washers. The required components must strictly adhere to NAS1758 Revision 3 and NSN 5310010430046, specifically part number NAS1758L6. All parts must be manufactured or sourced in compliance with the DLA Master List of Technical and Quality Requirements for critical application items. The contract is designated under NAICS code 332312, with the place of performance located at Tinker AFB. Interested parties must have submitted responses by the deadline of November 13, 2026. This procurement ensures that prime contractors on DLA supply contracts receive specialized hardware meeting rigorous military and technical specifications.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Quick Release Pin SupplierThis subcontract involves the supply of 43 specialized quick-release pins, identified by NSN 5315-015-33818-8, to support prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these pins in strict accordance with the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. All items must be packaged according to RP001 DLA Packaging Requirements and delivered to the designated DLA destination in San Diego, California. The procurement falls under NAICS code 334418, with a response deadline set for November 13, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Machine Bolt Supplier (NSN 5306-0133-73780)This subcontract involves the supply of 11 machine bolts identified by NSN 5306013373780 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the bolts to ensure they meet all required material specifications. Additionally, the contractor must provide Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The contract falls under NAICS code 333318 and specifies the place of performance as Tracy, California. Interested parties must adhere to the response deadline of November 13, 2026, following the posting date of November 6, 2026.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Hexagon Head Cap Screw SupplierThis subcontract involves the supply of hexagon head cap screws for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing screws that adhere to ASME B18.2.1 and NSN 5305-00-939-0608 standards. Quality assurance must be conducted via sampling per MIL-STD-1916 or ASQ H1331, and the provider must maintain an SAE AS9003 or ISO 9001 certified quality system. The contract requires the delivery of 20 completed screws to DLA Distribution centers in Albany and New Cumberland. All shipments must be packaged and labeled in strict accordance with ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Raw Material Supply for Close Tolerance FastenersThis subcontract involves the supply of raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the provision of high-grade alloy or specialty steel wire, bar, or rod that adheres to the specific chemical and physical properties required for NSN 5305-01-167-9755. To ensure quality and traceability, all delivered materials must be accompanied by Material Test Reports and maintain full compliance with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in New Cumberland. Interested parties must respond by November 13, 2026, for this requirement categorized under NAICS code 331110.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Precision Close Tolerance Screw FabricationThis subcontract for Precision Close Tolerance Screw Fabrication involves the manufacture of 4,333 finished, inspected, and packaged screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining and forming in accordance with NSN 5305-01-167-9755 and the DLA Master List, utilizing CNC machining and metrology equipment. Performance will take place in New Cumberland. To ensure quality and compliance, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and adhere to sampling standards per MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Machine Screw Supply (NAS1102-06-44)This subcontract involves the supply of 100 specialized aerospace-grade machine screws for the Department of Defense, specifically through the DLA Weapons Support ASC Commodities Division. The required components must match NAS1102-06-44 and NSN 5305011771791 standards. Performance will take place at Hill AFB, with the contractor responsible for either manufacturing or sourcing the fasteners to meet strict aerospace specifications. Compliance with government logistics and packaging standards is mandatory, requiring adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 DLA Packaging Requirements for palletization. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 332710.

POSTED

DEADLINE

Supply of Socket Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement of 1,004 socket head cap screws. The selected provider is responsible for manufacturing or sourcing the hardware and ensuring all items strictly adhere to MIL-STD-129 standards for marking and labeling to support prime contractors fulfilling DLA supply contracts. Logistics for the order are handled through Government-Arranged Transportation via the First Destination Transportation program. Performance for this contract is centered in Tracy, California, with a response deadline set for November 13, 2026.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Military Preservation and Packaging ServicesThis subcontract for Military Preservation and Packaging Services supports prime contractors on projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work involves the preservation, packaging, packing, and marking of hardware to prevent corrosion and damage during transit. All operations must be executed in strict accordance with MIL-DTL-197M, and the provider must utilize a packaging facility that adheres to Section 4 of that same standard. The performance of these services will take place in San Diego, California. The opportunity was posted on November 6, 2026, with a response deadline of November 13, 2026. The contract falls under NAICS code 492110 and focuses on the delivery of properly preserved and marked shipments for government use.

Couriers and Express Delivery Services

POSTED

DEADLINE

Annular Ball Bearing Manufacturing and SupplyThis subcontract involves the manufacture and supply of 34 specialized annular ball bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The provider is responsible for sourcing or manufacturing these components to meet specific technical data requirements accessed via the DLA portal, with performance taking place in San Diego. Strict quality control measures are mandatory for this project, requiring adherence to the verification requirements outlined in Section 4 of MIL-DTL-197M. Additionally, the contractor must implement sampling plans in accordance with either MIL-STD-1916 or ASQ H1331, Table 1, to ensure all delivered units meet the Department of Defense standards.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Third-Party Quality Inspection and Sampling

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) and Certification

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance/First Article Testing (FAT)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article Testing and Certification

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Validation

POSTED

DEADLINE

First Article and Production Lot Testing Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) for Sensitive Switches

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Quality Assurance Sampling and Inspection Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Quality Inspection and Sampling

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Third-Party Quality Assurance and Origin Inspection

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) for Electrical Relay Covers

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS