Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Test (FAT) Services for Transmission Coolers

Open

Federal

Response Deadline11/16/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing First Article Testing services for transmission coolers supporting the DLA Weapons Support Land Supply Chain. The selected contractor will be responsible for executing rigorous FAT protocols to ensure dimensional accuracy, pressure integrity, and overall performance of the first production unit. These evaluations must be conducted using specialized CMM and fluid flow testing equipment in accordance with SAE standards, culminating in the delivery of a comprehensive FAT Report and a validated unit for government acceptance. The project is based in Tracy, California, and falls under NAICS code 541380. Due to the nature of the technical data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 16, 2026.

General Info

First Article Testing for transmission coolers in Tracy, CA; CMMC Level 2 required.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-4192.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COOLER, FLUID, TRANSMISS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:00:00 AM PSTin 9 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors on DLA Weapons Support Land Supply Chain projects. Executes FAT protocols for dimensional accuracy, pressure testing, and performance of the first production unit using CMM and fluid flow testing equipment. Requires CMMC Level 2 for handling technical data and adherence to SAE standards. Delivers a FAT Report and validated first-article unit for government acceptance.

Similar Contracts

Same NAICS industry code

Government Fit Verification Testing ServicesThe Government Fit Verification Testing Services subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the performance of First Article testing for prime contractors. The primary objective is to evaluate the form, fit, and function of gaskets on the next higher assembly to ensure operational compatibility. This process involves conducting fit verification testing and utilizing precise measurement tools to document results. The selected provider will be responsible for generating and submitting formal first article exhibits and comprehensive test reports that confirm the fit and function of the components. The work is to be performed at Tinker AFB, and the solicitation is categorized under NAICS code 541380. Responses for this opportunity are due by November 21, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Quality Control (QC) and Material Testing ServicesThis subcontract for Quality Control (QC) and Material Testing Services supports prime contractors on projects for the Oil & Gas Development Company Limited (OGDCL) in Pakistan. The scope of work involves performing physical inspections and technical testing of materials, including field tests for soil and concrete, Non-Destructive Testing (NDT) on welds, and the verification of material mill certificates. The service provider is responsible for delivering formal Material Test Reports and QC Pass/Fail Certificates to ensure project standards are met. To qualify for this engagement, personnel must hold specialized certifications, specifically Certified Welding Inspector (CWI) or NDT Level II/III credentials. Interested parties must submit their responses by November 23, 2026, in accordance with the solicitation posted on November 7, 2026. The contract falls under NAICS code 541380, focusing on industrial testing and quality assurance within the oil and gas sector.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 9 hours ago

DEADLINE

ELITE/AIHA Accredited Legionella Laboratory TestingThis subcontract provides off-site laboratory analysis for prime contractors working on California Department of General Services facility projects. The scope of work focuses on the enumeration of Legionella in accordance with ISO 11731 standards, including Identification Serogroup testing for all positive results. To ensure quality and compliance, the performing laboratory must hold both ELITE and AIHA EMLAP certifications. Analytical reports and test results are to be delivered electronically via email to the FMD Contract Administrator. This opportunity falls under NAICS code 541380 and is associated with the California Department of General Services, with a response deadline set for November 23, 2026.

California Department of General Services

POSTED

about 18 hours ago

DEADLINE

25-282903.FMD.StatewideLegionellaTesting

Solicitation # CR-25-282903

The California Department of General Services, Facilities Management Division (FMD) is soliciting bids for statewide Legionella sample collection, laboratory testing, analysis, and reporting for state-owned buildings and grounds. Operating across the Northern, Bay, and Southern regions, the contractor will provide as-needed routine and investigative sampling of domestic and non-potable water systems. Key deliverables include off-site laboratory analysis using a provided Chain of Custody Form, with results emailed within 48 hours of receipt and final survey reports submitted within 15 working days. All laboratories must be ELITE certified and AIHA Environmental Microbiology accredited, and testing must adhere to ISO 11731 standards. Final reports must be provided in a room-by-room format and signed by a Certified Industrial Hygienist (CIH). The contract will be awarded to the lowest responsive and responsible bidder, with a 3% Disabled Veteran Business Enterprise (DVBE) participation goal. Qualified personnel must include a Competent Professional and a Competent Technician as defined by the AIHA Technical Framework: Legionella (2020), and a CIH certified through the Board of Global Credentialing. Bidders must maintain significant insurance coverage, including $1,000,000 for Commercial General Liability, Pollution Liability, and Professional Liability. Performance is subject to prevailing wage rates and California Building Standards Code. Emergency service requests require a response within two hours. Payments are governed by Government Code Chapter 4.5, and a one-year warranty is required from the date of acceptance.

California Department of General Services

POSTED

about 18 hours ago

DEADLINE

Construction Materials Testing & InspectionThis subcontract for Construction Materials Testing and Inspection involves providing specialized materials testing and on-site construction observation for prime contractors working on Sunrise Water Authority projects. The scope of work includes conducting field testing for asphalt, soil, and concrete, as well as reviewing RFIs and submittals. All activities must be performed using specialized equipment and adhere to the standards set by the City of Happy Valley, Clackamas County, ODOT, and the Sunrise Water Authority. The selected contractor is responsible for delivering comprehensive inspection logs, material test reports, and certifications of compliance. This opportunity is categorized under NAICS code 541380 and is located in Alley, Oregon. Interested parties must submit their responses by the deadline of December 11, 2026.

Sunrise Water Authority

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Designated Substances Survey (DSS)This subcontract involves providing specialized sampling and analysis for hazardous materials on behalf of prime contractors for the Government of Ontario Ministry of Energy and Mines. The primary objective is to conduct Designated Substances Surveys across eight different mine sites to identify the presence of asbestos, lead, and PCBs. The selected provider must employ a certified hazardous materials surveyor and ensure all activities maintain strict compliance with the Occupational Health and Safety Act. The final deliverable for this engagement consists of comprehensive Designated Substances Survey reports for each of the eight designated sites.

Energy and Mines

POSTED

about 22 hours ago

DEADLINE

Electrical Testing and Commissioning AgentThis subcontract opportunity is for an Electrical Testing and Commissioning Agent to provide independent testing and commissioning services for prime contractors on Maryland Department of Transportation Maryland Transit Administration traction power substation projects. The scope of work includes conducting insulation and winding resistance testing for motors, power factor testing for transformers, and resistance-to-ground testing for switchboards. Additionally, the agent is responsible for performing grounding and bonding certification as well as functional performance verification. The selected contractor must deliver certified test reports and Commissioning Issues Resolution Logs to ensure project compliance. This opportunity falls under NAICS code 541380 and was posted on November 6, 2026, with a response deadline of November 19, 2026.

POSTED

about 22 hours ago

DEADLINE

Comprehensive Pest Control Services (Insect and Vertebrate)This subcontract for Comprehensive Pest Control Services involves providing extermination and control for both insects and vertebrates at the Fairview Developmental Center in Orange, California. Working under prime contractors for the California Department of Developmental Services, the selected provider will manage a wide array of pests, including rodents, birds, bees, wasps, and various crawling and flying insects. Services are delivered through a combination of established monthly schedules and a mandatory four-hour emergency response time to ensure a pest-free environment. To qualify for this engagement, contractors must hold a Structural Pest Control Board License and a California Qualified Applicator License. Key deliverables include the successful eradication and control of target pests and the submission of completed Inspection Checklists. The solicitation was posted on November 6, 2026, with a response deadline of November 30, 2026.

California Department of Developmental Services

POSTED

about 23 hours ago

DEADLINE

Quality Assurance Representative (QAR) Support/InspectionThis subcontract opportunity is for Quality Assurance Representative support and inspection services benefiting the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament. The selected provider will perform specialized quality inspections and verifications for prime contractors, specifically focusing on critical gun parts and military-grade gun mounts. Work is conducted at the manufacturer's facility using precision measurement tools to ensure all unique requirements are met prior to formal acceptance or rejection. All activities must adhere strictly to DLA and DoD Quality Assurance Representative standards, culminating in the delivery of detailed inspection reports. The place of performance is located in Fort Campbell, Kentucky. Interested parties should note the response deadline of November 16, 2026, for this effort categorized under NAICS code 541380.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article Test (FAT) ServicesThis subcontract opportunity is for First Article Testing services supporting the DLA Weapons Support Land Supply Chain. The selected provider will validate manufacturing processes for prime contractors by testing sample units against the technical data package using strength testing and metrology equipment. A formal test report must be delivered within 30 calendar days of the contract date. The project is a total small business set-aside under NAICS code 541380, with performance located in New Cumberland. Due to the nature of the work, the contractor must maintain ITAR and EAR compliance as well as CMMC Level 2 certification. Responses are due by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Dimensional Inspection and FAT ValidationThis subcontract opportunity, titled Aerospace Dimensional Inspection and FAT Validation, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing dimensional verification and quality assurance services for prime contractors, specifically focusing on the validation of First Article Tests and production lots. Work is performed at Tinker AFB and requires the use of CMM or optical comparators to ensure compliance with ASME Y14.31 and MIL-STD-1916 standards, including the verification of Digital Mylar data and grid unit tolerances. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380. To be eligible, providers must maintain ISO 9001:2015 certification and are responsible for delivering detailed inspection reports and certifications of conformance. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Third-Party Quality Inspection and Certification (Zero-Based Sampling)This subcontract for Third-Party Quality Inspection and Certification involves providing independent inspection and acceptance services at the origin for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the execution of zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to verify bare item marking and close tolerance specifications. To ensure accuracy, the contractor must utilize precision measurement tools such as optical comparators or CMM and deliver formal certification of acceptance along with detailed inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 541380. Performance of these services will take place at Robins Air Force Base. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Grommet Assembly Fabrication and SupplyThis subcontract involves the manufacture and supply of five completed Grommet Assembly units for prime contractors supporting the DLA Weapons Support Land Supply Chain. The fabrication process must strictly adhere to Basic Drawing NR 53711 5959323 Revision NR DTD 01/01/1939 and TDP Rev A Gen 3, with identification marking applied according to MIL-STD-130N. The contractor is required to comply with the Buy American Act and maintain safeguards for covered defense information as specified by DFARS regulations. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supplier of Plain Encased Seals (NSN 5330-01-312-3700)This subcontract involves the supply of one Plain Encased Seal, part number H18AM and NSN 5330-01-312-3700, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The required seals must be asbestos-free in accordance with FED-STD-313 and must be delivered within five days of the order. Performance for this contract will take place at Fort Eustis. The supplier is responsible for packaging the items in medium duty, waterproof, greaseproof, and opaque bags as specified by MIL-DTL-117. Additionally, all items must be marked and labeled according to MIL-STD-2073-1E and MIL-STD-129 standards. This procurement falls under NAICS code 339999 for the Department of Defense.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Access Covers (NSN 5340014090972)This subcontract involves the manufacture and supply of 377 specialized access covers for prime contractors working on Department of Defense projects under the DLA Weapons Support Land Supply Chain. The fabrication must strictly adhere to Drawing NR 19207 12273848 and 19207 12273849, Revision D, utilizing precision metal fabrication equipment. Performance will take place in New Cumberland, Pennsylvania. The contractor is required to maintain strict regulatory compliance, including MIL-STD-129 for marking and DFARS 252.223-7008 regarding the use of hexavalent chromium. Additionally, the provider must meet DFARS 252.204-7012 cybersecurity standards to ensure the protection of sensitive information. The project falls under NAICS code 332710.

POSTED

DEADLINE

Fabrication and Supply of Valve Actuator GuardsThis subcontract involves the fabrication and supply of 1,282 Valve Actuator Guards for the DLA Weapons Support Land Supply Chain. The manufacturer is responsible for producing the units according to Army and DCSC Drawing 16236 CS-2300-0001 specifications, applying Chemical Agent Resistant Coatings, and adhering to MIL-STD-1916 zero-based sampling standards. Finished, coated, and packaged guards must be delivered to DLA Distribution Barstow. To be eligible for this project, the contractor must maintain CMMC Level 2 and ITAR compliance. The work falls under NAICS code 332311 and is managed under the Department of Defense. Interested parties must respond by November 16, 2026.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Loop Clamp Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 32 loop clamps, part number 7019031310, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet strict technical specifications and adhere to specific military standards for marking, palletization, and packaging, specifically MIL-STD-129, RP001, and MIL-STD-2073-1E. Additionally, any hazardous items must be labeled in accordance with the Hazard Communication Standard 29 CFR 1910.1200. The final deliverables must be shipped to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This procurement falls under NAICS code 332510 and is managed under the Department of Defense. The response deadline for this requirement is November 16, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract opportunity is for the provision of military-grade packaging and labeling services to support prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will be responsible for supplying all necessary packaging materials and performing final packing and marking for 31 ball joints. All work must be executed in strict accordance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with delivery handled on an FOB Origin basis. The project is designated as a Total Small Business Set-Aside under NAICS code 488510 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must possess specialized expertise in DLA packaging and marking standards to ensure compliance with all military specifications.

Freight Transportation Arrangement

POSTED

DEADLINE

Precision Ball Joint Fabrication (NSN 3040-01-483-1204)This subcontract opportunity is for the precision machining, manufacture, and supply of 31 specialized ball joints for the DLA Weapons Support Land Supply Chain. All components must be fabricated in accordance with NSN 3040-01-483-1204 and the DLA Master List of Technical and Quality Requirements. The project mandates strict adherence to MIL-STD-1916 or ASQ H1331 sampling standards and requires compliance with Berry Amendment domestic material restrictions. The contract is designated as a Total Small Business Set-Aside under NAICS code 332710, with performance located in New Cumberland. Qualified bidders must hold ITAR/EAR and CMMC Level 2 certifications to be eligible. Responses are due by November 16, 2026, for the delivery of the finished ball joints.

POSTED

DEADLINE

MIL-STD Packaging and Marking for DLA HardwareThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support Land Supply Chain. The scope of work focuses on the processing of springs, ensuring all items are packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129 for Critical Application Items. The contractor is required to use MIL-SPEC packaging materials and industrial labeling systems to ensure all deliverables are ready for FOB Origin shipment. The project is categorized under NAICS code 339999 and will be performed in Greensboro, North Carolina. Interested parties must note the response deadline of November 16, 2026, following the posting date of November 6, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of High-Grade Spring Steel/Alloy WireThis subcontract involves the supply of raw high-tensile spring steel or specialized alloy wire to support prime contractors for the DLA Weapons Support Land Supply Chain. The provided materials must strictly adhere to the tensile strength requirements specified under NSN 5360-01-488-6184. To ensure quality and compliance, the supplier is required to provide Material Test Reports and Certificates of Conformance with all deliveries. The contract mandates full compliance with the Buy American Act and the Balance of Payments Program. Performance for this requirement is centered in Greensboro, North Carolina, under NAICS code 332613. Interested parties must submit their responses by November 16, 2026.

Spring Manufacturing

POSTED

DEADLINE

Manufacture of Helical Compression Springs (NSN 5360-01-488-6184)This subcontract involves the manufacture of 34 custom helical compression springs under NSN 5360-01-488-6184 for the DLA Weapons Support Land Supply Chain. The scope of work includes coiling spring wire, heat treating, stress relieving, grinding ends for squareness, and applying surface finishes in accordance with the DLA Master List. The project will be performed in Greensboro, North Carolina, under NAICS code 332613. To qualify, the contractor must utilize precision coiling machines and maintain NIST SP 800-171 compliance. The use of additive manufacturing is strictly prohibited for this contract. Interested parties must respond by November 16, 2026.

Spring Manufacturing

POSTED

DEADLINE

Supply of Bail HandlesThis subcontract involves the manufacture or procurement of 357 bail handles for prime contractors supporting Defense Logistics Agency projects under the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet specific part requirements and are delivered FOB Origin to Tracy, California. Strict adherence to military standards is required, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Additionally, the provider must comply with IP025 and DFARS 252.223-7001 regarding the handling of hazardous materials and must maintain CMMC Level 2 certification.

Wood Container and Pallet Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article and Production Lot Testing

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article Test (FAT) Validation

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Certification

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Zero-Based Sampling Inspection Services

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Production Lot Testing (PLT) for O-Rings

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) for Regulating Valves

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Aerospace Certification and Traceability Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Component Inspection and Sampling Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) Support

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Third-Party Quality Assurance and Sampling

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS