Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing and Certification Services

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing and Certification Services involves performing First Article Testing for prime contractors delivering DLA supply contracts. The scope of work requires the testing of three units of NSN 5330-01-523-2319 using laboratory equipment to ensure compliance with government specifications. The contractor must coordinate in-process verification with the Quality Assurance Representative and produce a formal First Article Test Report in accordance with FAR 52.209-3. The project is managed under NAICS code 541380 for the Department of Defense, specifically the Land Supplier Opns Vehicle Spt agency. Performance will take place in Anniston, Alabama. The final deliverables consist of a completed FAT report and the three tested sample units. The response deadline for this opportunity is September 28, 2026.

General Info

Subcontract for First Article Testing of three NSN units in Anniston, Alabama.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

ANNISTON, AL, 36201-4199, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-26-T-254H.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTRACTOR FIRST ARTIC

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors delivering DLA supply contracts. Tests 3 units of NSN 5330-01-523-2319 using laboratory equipment to verify government specifications. Coordinates in-process verification with the Quality Assurance Representative (QAR) and generates a formal First Article Test Report per FAR 52.209-3. Delivers a completed FAT report and 3 tested sample units.

Similar Contracts

Same NAICS industry code

Precision Thread Gauging and Inspection ServicesThe Precision Thread Gauging and Inspection Services subcontract, issued by the Department of Defense ASC Commodities Division, involves performing dimensional conformance testing and quality assurance inspections for prime contractors delivering DLA supply contracts. The scope of work focuses on inspecting Class 3A and 3B threads using System 22 of FED-STD-H28/20 and verifying inspection results according to MIL-STD-1916. The service provider is required to use calibrated thread gauges and measurement tools compliant with FED-STD-H28/20 to deliver detailed inspection reports and certifications of conformance. This project falls under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Quality Assurance and Sampling ServicesThis subcontract for Quality Assurance and Sampling Services supports prime contractors delivering DLA supply contracts through the ASC Commodities Division of the Department of Defense. The primary scope of work involves performing independent sampling and inspection at Hill AFB, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The contractor is responsible for verifying bare item marking per RQ017 using precision measurement tools and validating compliance with DLA Master List R or I requirements. Key deliverables include the provision of detailed inspection reports and sampling certifications. The opportunity is categorized under NAICS code 541380, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Quality Assurance / Third-Party TestingThis subcontract with the Department of Defense ASC Commodities Division involves providing independent testing and certification of fasteners for prime contractors fulfilling DLA supply contracts. The scope of work includes performing material analysis, hardness testing, and dimensional inspections utilizing precision calipers and metallurgical equipment. To ensure compliance, the provider must maintain ISO/IEC 17025 certification or an equivalent quality standard and is responsible for delivering detailed test reports and Certificates of Conformance. The opportunity is categorized under NAICS code 541380 and is based in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test (FAT) Services supports Depot Oklahoma projects by performing initial testing and validation of the first production unit for prime contractors. The scope of work involves validating material properties, dimensions, and overall performance against the technical data package specified in CLIN 0002, utilizing specialized material testing labs and metrology equipment. The final deliverable is a FAT Report and certification confirming that the item adheres to all government specifications. The project is managed by the Department of Defense for Depot Oklahoma, with the place of performance located at Tinker AFB. Interested parties must respond by September 28, 2026, under NAICS code 541380.

POSTED

about 11 hours ago

DEADLINE

Quality Inspection and Sampling CertificationThis subcontract for Quality Inspection and Sampling Certification supports prime contractors on DLA Aviation ASC projects within the Department of Defense. The selected provider will perform independent quality assurance and sampling certification, executing sampling plans according to MIL-STD-1916 or ASQ H1331 Table 1. Additionally, the contractor must verify that marking and packaging comply with MIL-STD-129 and MIL-STD-2073-1E, delivering all necessary inspection reports and certification documents. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 541380. Qualified candidates must hold ASQ or equivalent military quality assurance certifications. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Production Lot Testing and Quality Validation ServicesThis subcontract for Production Lot Testing and Quality Validation Services involves performing specialized quality conformance testing on aircraft engine parts for prime contractors supporting ASC Supplier Oper AE and AF Div projects. The scope of work includes conducting tests on random samples to validate technical and quality requirements following First Article approval, coordinating sample selection with the Quality Assurance Representative, and delivering comprehensive test results and validation reports. The project is managed by the Department of Defense and will be performed in Jacksonville, Florida. Under NAICS code 541380, the contract requires the delivery of verified quality conformance data to ensure all production lots meet the necessary technical specifications.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Quality Assurance and Production Lot Testing ServicesThis subcontract for Quality Assurance and Production Lot Testing Services is issued by the Department of Defense ASC Commodities Division and is set aside for Service-Disabled Veteran-Owned Small Businesses. The contractor is responsible for performing Production Lot Testing to validate the quality conformance of cable assemblies for prime contractors delivering DLA supply contracts. Specifically, the scope involves executing government-required testing for lot sizes, including standard sample testing for lots exceeding five units, to validate the electrical and physical specifications of NSN 6150010916465. The selected provider will utilize specialized testing equipment to ensure all specifications are met and will be required to deliver comprehensive PLT validation reports and certified test samples. Performance for this contract is located in New Cumberland, Pennsylvania, under NAICS code 541380. Responses to the solicitation are due by September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing independent laboratory testing and validation services for prime contractors supporting the Department of Defense ASC Supplier Oper OEM Division. The scope of work focuses on conducting First Article Testing and Production Lot Testing using calibrated precision measurement equipment in accordance with standard RT001. Additionally, the provider is responsible for generating documentation for Source Approval Requests per RC001 and delivering certified test reports and validation certificates. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Quality Inspection and Sampling CertificationThis subcontract for the Defense Logistics Agency involves providing quality sampling and inspection services for prime contractors. The selected provider will execute zero-based sampling plans based on MIL-STD-1916, ASQ H1331 Table 1, and MIL-STD-105/ASQ Z1.4 to determine appropriate sample lot sizes. Using precision measurement and testing equipment, the contractor must certify that components meet government standards and deliver a quality inspection report along with a certification of compliance. The project is categorized under NAICS code 541380 and will be performed at Hill AFB. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test (PLT) Services supports the ASC Supplier Oper OEM Division within the Department of Defense. The selected provider will perform quality assurance and production lot testing for prime contractors to verify component acceptability, ensuring all processes align with L31 Additive Manufacturing standards. The scope of work includes coordinating with the Engineering Support Activity for final approval and delivering a comprehensive PLT report and certification of acceptability. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, following the solicitation posted on September 15, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

First Article and Production Lot Testing ServicesThis subcontract for First Article and Production Lot Testing Services supports the Department of Defense within the Construction and Equipment Manufacturing and Construction sector. The selected provider will perform critical technical testing and validation for prime contractors, specifically conducting First Article Tests on initial units and Production Lot Tests on final deliveries to ensure all products meet strict government specifications. Operating under NAICS code 541380, the contractor must use specialized measurement equipment to certify results and deliver comprehensive test reports and certifications of compliance. All activities must be completed within a 60-day notification window, with the place of performance located in Yorktown, Virginia. The response deadline for this opportunity is September 28, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 11 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services involves performing First Article Testing for prime contractors delivering DLA Aviation supply contracts. The scope of work focuses on validating one unit of lot/item 2935 / 12516346 by utilizing inspection equipment to verify the seals and tolerances of aviation filler caps. The contractor is responsible for coordinating approval notifications with the Contracting Officer and delivering the validated test unit and accompanying test report to Tinker AFB. The project is managed by the ASC Supplier Oper OEM Division within the Department of Defense and is categorized under NAICS code 541380. Performance of the services will take place at Hill AFB. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Gasket Manufacturing and SupplyThis subcontract for Gasket Manufacturing and Supply involves the production and sourcing of gaskets for prime contractors supporting Department of Defense supply contracts through the Land Supplier Opns Vehicle Spt agency. The provider must ensure all products adhere to the DLA Master List of Technical and Quality Requirements and strictly comply with RA001 and RP001 packaging and labeling standards. Quality control and inspection processes are required to meet agency specifications, with final delivery of finished goods handled as FOB Origin. The opportunity is categorized under NAICS code 339991 and is centered at the place of performance in Fort Bliss, Texas. Interested parties must respond by September 28, 2026, following the posting date of September 15, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of NSN 5330-01-523-2319 HardwareThis subcontract with the Department of Defense involves the manufacture or procurement of five units of hardware item NSN 5330-01-523-2319 for prime contractors supporting DLA supply contracts. The supplier must ensure all items are asbestos-free, contain no Class I ozone-depleting chemicals, and adhere to Type I Code S shelf-life requirements. All deliverables must be packaged and marked according to MIL-STD-129 and RP001 standards. The final delivery of the five units is set as FOB Origin to DLA Distribution Anniston, Alabama.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Gasket (NSN 5330-01-618-4841)This subcontract involves the manufacture and supply of one gasket, identified by NSN 5330-01-618-4841, for the Department of Defense under the Land Supplier Opns Vehicle Spt agency. The contractor is responsible for sourcing or producing the item according to specific technical requirements and ensuring it is packaged in medium-duty, waterproof, greaseproof, and opaque bags to protect against UV deterioration. All deliverables must be shipped FOB Origin and strictly adhere to MIL-STD-2073-1E, MIL-STD-129, MIL-STD-130N, and DFARS 252.223-7008 standards. The opportunity is categorized under NAICS code 339999 and is based in San Diego, California. Interested parties must submit their responses by September 28, 2026, following the posting date of September 15, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Structural Channel (P/N 1051A-02-21)This subcontract involves the manufacture or procurement of one unit of a structural channel, specifically part number 1051A-02-21 from Isometrics Inc, to support prime contractors delivering DLA supply contracts. The project is managed under the Department of Defense through the Land Supplier Opns Vehicle Spt agency, with the place of performance located at Fort Bliss, Texas. The contractor is required to adhere to strict quality and logistics standards, ensuring all items are packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129. The opportunity was posted on September 15, 2026, with a response deadline of September 28, 2026, falling under NAICS code 332312.

Fabricated Structural Metal Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Gaskets (NSN 5330-01-730-7329)This subcontract involves the manufacture or sourcing of gaskets meeting the technical specifications for NSN 5330-01-730-7329 to support prime contractors delivering DLA supply contracts. The selected provider must deliver two units of gaskets, ensuring all items are properly marked according to MIL-STD-129 and packaged and palletized in compliance with RP001 DLA Packaging Requirements for Procurement. The contract is issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with the place of performance located at Fort Campbell. The opportunity is categorized under NAICS code 339999, with a response deadline of September 28, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Nonmetallic Strip SealThis subcontract involves the supply of one nonmetallic strip seal for prime contractors supporting the Department of Defense Land Supplier Operations Vehicle Support. The selected provider is responsible for manufacturing or sourcing seals that strictly adhere to RA001 technical requirements. The contract mandates specific logistics and quality standards, requiring packaging according to MIL-DTL-117, Type II, Class C, Style 1, and marking in compliance with MIL-STD-129 and MIL-STD-130N. Performance for this requirement is centered at Fort Drum, New York, under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Industrial Knobs (NSN 5355-01-513-6915)This subcontract involves the manufacture and supply of eight industrial knobs meeting NSN 5355-01-513-6915 specifications for prime contractors supporting the Department of Defense, specifically the Land Supplier Opns Vehicle Spt. The contractor is responsible for ensuring all items are delivered FOB Origin and comply with the Buy American Act and DLA Master List RA001. All deliverables must adhere to strict military standards, including MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking. The performance of this contract is centered in San Diego, California, under NAICS code 327999, with a response deadline of September 28, 2026.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Gasket Supply (NSN 5330014779623)This subcontract with the Department of Defense for Land Supplier Opns Vehicle Spt involves the manufacture and supply of specialized gaskets meeting NSN 5330014779623 specifications. The contractor is responsible for ensuring all products are palletized according to RP001, marked per MIL-STD-129, and that any hazardous materials are shipped in compliance with IP025. Performance will take place in Little Falls, Minnesota. The contract requires strict adherence to the Buy American Act under DFARS 252.225-7001. Interested parties must respond by September 28, 2026, for this requirement categorized under NAICS code 326111. The primary objective is the delivery of fully compliant, marked, and palletized gaskets to support prime contractors.

Plastics Bag and Pouch Manufacturing

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Packaging and Bagging SupplierThis subcontract involves the provision of specialized military-grade packaging services for prime contractors fulfilling DLA supply contracts. The supplier is responsible for packaging preformed components in opaque bags, ensuring strict adherence to MIL-DTL-117, Type II, Class C, Style 1 and RP001 DLA Packaging Requirements for Procurement. All delivered components must be sealed in compliant opaque bags to meet Department of Defense standards. The contract is managed by the Land Supplier Opns Vehicle Spt agency under the Department of Defense, with performance taking place in New Cumberland, Pennsylvania. The opportunity was posted on September 15, 2026, with a response deadline of September 28, 2026, and is categorized under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

Preformed Packing ManufacturerThis subcontract opportunity with the Department of Defense, specifically the Land Supplier Opns Vehicle Spt agency, seeks a manufacturer to produce preformed packing components under NSN 001988997. The selected provider will utilize polymers or elastomers to create components that adhere to strict technical specifications and dimensions for prime contractors delivering DLA supply contracts. A critical requirement of the production process is the absolute prohibition of mercury or mercury compounds to ensure compliance with safety and quality standards. The contract falls under NAICS code 313320 and specifies a place of performance in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 28, 2026, following the posting date of September 15, 2026. All finished components must meet rigorous DLA quality standards to be accepted for delivery.

Fabric Coating Mills

POSTED

about 11 hours ago

DEADLINE

Supply of Gaskets (NSN 5330-00-174-4959)This subcontract involves the manufacture and supply of two asbestos-free gaskets, identified by NSN 5330-00-174-4959, for prime contractors supporting the Department of Defense. The supplier must ensure all items are produced according to the DLA Master List of Technical and Quality Requirements and packaged in accordance with MIL-STD-2073-1E using specific cushioning and dunnage. The contract requires strict compliance with NIST SP 800-171 standards for data security. Final delivery of the units is to be made to DLA Distribution San Joaquin in Tracy, California. The opportunity is categorized under NAICS code 339991, with a response deadline of September 28, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Specialized Military Packaging and Preservation ServicesThis subcontract for Specialized Military Packaging and Preservation Services involves providing specialized packaging for prime contractors delivering DLA supply contracts. The scope of work includes sealing UV-sensitive items in medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1. The provider must ensure all markings comply with MIL-STD-129 and MIL-STD-130N, while palletization must adhere to RP001 and MIL-STD-2073-1E standards. Additionally, the contractor must maintain strict compliance with the IP056 mercury prohibition. The final deliverables are to be packaged, marked, and delivered for shipment to the USS AMERICA LHA 6. This requirement is managed by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with the place of performance located at FPO 96660. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026, falling under NAICS code 488490.

Other Support Activities for Road Transportation

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS