Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing and Quality Assurance Services

Active

Federal

Response Deadline10/29/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract, issued by the Department of Defense under Construction and Equipment MRO SVC I, requires the provision of First Article Testing and Quality Assurance Services for DLA Troop Support procurement projects. The selected contractor will be responsible for conducting performance and stress tests on initial units, coordinating witness testing with ARDC QA at Rock Island Arsenal, and delivering validated test units along with certified reports prepared in accordance with FAR 52.209-3. To ensure technical compliance, the contractor must utilize calibration-certified measurement tools throughout the testing process. This opportunity falls under NAICS code 541380 and was posted on October 22, 2026, with a response deadline of October 29, 2026.

General Info

DoD subcontract for First Article Testing and Quality Assurance services for DLA projects.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8E9-27-Q-0056.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

41--FAN,VANEAXIAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 29

Submission deadline

Response Deadline

10/29/2026, 12:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors on DLA Troop Support procurement projects. Conducts performance and stress tests on initial units, coordinates witness testing with ARDC QA at Rock Island Arsenal, and prepares FAT reports per FAR 52.209-3. Requires calibration-certified measurement tools. Delivers certified FAT reports and validated test units.

Similar Contracts

Same NAICS industry code

Solicitation # 49187

The Municipality of Anchorage is seeking bids for ITB 2026B077 to provide hydrostatic testing services at the Don Young Port of Alaska for the period spanning 2026 to 2030. This solicitation, identified by number 49187, requires prospective bidders to adhere to a strict timeline, with the final response deadline set for October 28, 2026, at 5:00 P.M. A critical requirement for eligibility is attendance at the mandatory site visit held on September 29, 2026, at 1871 Anchorage Port Road. Bidders who do not attend this visit will be ineligible for the award. All inquiries regarding the invitation to bid must have been submitted in writing via email by September 30, 2026, including the buyer's name and the specific ITB details in the subject line.

Municipality of Anchorage

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Third-Party Dimensional Inspection and CertificationThis subcontract for Third-Party Dimensional Inspection and Certification supports the DLA Weapons Support Aviation Supply Chain by providing independent quality assurance and dimensional verification for prime contractors. The scope of work focuses on verifying Class 3A and 3B threads in accordance with System 22 of FED-STD-H28/20, utilizing sampling plans based on MIL-STD-1916 or ASQ H1331. The selected provider must operate out of an ISO 9001 or SAE AS9003 certified facility and possess the necessary precision gauging tools to deliver detailed inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in Cherry Point. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Specialized Materials Testing Laboratory (Production Lot Test)This subcontract opportunity is for a Specialized Materials Testing Laboratory to perform Production Lot Testing for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider will execute tests according to procurement note E04 to verify the performance standards and material properties of torpedo components, with a specific focus on chemical testing for Otto Fuel compatibility. All work will be performed in Bremerton, Washington, and requires the delivery of formal test reports and certifications of compliance. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certifications and may require JCP certification to access necessary technical data. This requirement falls under NAICS code 541380. Interested parties must submit their responses by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Aviation Component Quality Inspection & CertificationThe Aviation Component Quality Inspection and Certification subcontract involves providing independent quality assurance and non-conformance testing for prime contractors supporting the DLA Weapons Support ASC. The selected provider will perform rigorous inspections using calibrated micrometers and CMM equipment in accordance with MIL-STD-1916 or ASQ H1331 to ensure zero-nonconformance. Additionally, the contractor is responsible for validating that all marking and packaging meet MIL-STD-129 and MIL-STD-2073-1E standards, ultimately delivering detailed quality inspection reports and certifications of conformance. To be eligible, contractors must hold AS9100 or ISO 9001 certifications and maintain CMMC Level 2 compliance. This opportunity is issued by the Department of Defense under NAICS code 541380. Interested parties must submit their responses by October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

Thermal Cycling and Environmental Validation TestingThis subcontract for Thermal Cycling and Environmental Validation Testing involves performing environmental stress testing for prime contractors on DLA supply contracts. The scope of work requires validating the performance of observation windows across a temperature range of -55°C to 65°C, executing at least 100 cycles over a two-hour period using environmental test chambers. The testing must verify structural integrity and clarity in accordance with Navy drawing 1582AS124, culminating in the delivery of certified test reports for 18 units. The project is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Due to the nature of the technical data handling involved, the contractor must maintain CMMC Level 2 certification. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 2, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform Production Lot Testing for prime contractors on DLA supply contracts to verify the dimensions and material properties of machine thread bushings. All testing must be executed using specialized metrology and testing equipment in strict accordance with government standards, culminating in the delivery of a certified Production Lot Test report. The performance of this contract will take place in New Cumberland, Pennsylvania. Key compliance requirements include maintaining CMMC Level 2 certification and coordinating directly with government inspectors for destination acceptance. Interested parties should note the response deadline of October 30, 2026, for this opportunity categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

First Article Testing for RF Cable AssembliesThis subcontract involves providing specialized testing and validation services for RF cable assemblies to support prime contractors on DLA supply contracts. The selected provider will execute First Article Test protocols to ensure electrical and physical characteristics align with the NSN technical data package, utilizing RF signal analyzers and network analyzers. The final deliverables for this engagement include a validated sample and a comprehensive First Article Test Report. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. To be eligible, contractors must maintain ISO 9001:2015 certification and have completed a CMMC Level 2 self-assessment. Responses for this opportunity are due by October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

First Article Testing and Quality ValidationThis subcontract for First Article Testing and Quality Validation supports the DLA Weapons Support Land Supply Chain by providing initial validation and quality testing for prime contractors. The selected provider is responsible for producing two units for government testing at Robins Air Force Base in Georgia and generating detailed inspection reports for 402 MXSG/MXRILL. The project requires the use of precision measurement and test equipment RT001 and strict adherence to FAR 52.209-4 compliance standards. The final deliverables include the two test units and formal Factory Acceptance Test approval documentation. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

First Article Test (FAT) and Certification ServicesThis subcontract involves providing specialized testing and certification services for the DLA Weapons Support Active Devices Division. The primary objective is to conduct First Article Testing on a single prototype unit to ensure full compliance with MIL-DTL-24231/2E standards. The selected provider must utilize precision measurement and testing equipment and perform quality assurance inspections following either ASQ H1331 or MIL-STD-1916 sampling methods. The project deliverables include the return of the tested First Article Testing unit and a comprehensive First Article Test Report. Performance will take place in Tracy, California, under NAICS code 541380. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

Valve Hydrostatic Testing and Quality ValidationThis subcontract, titled Valve Hydrostatic Testing and Quality Validation, involves performing pressure and leak testing for prime contractors on Defense Logistics Agency supply contracts. The scope of work requires conducting hydrostatic testing on four 12-inch gate valves using calibrated equipment to ensure full compliance with drawing specifications. Quality validation must be performed according to MIL-STD-1916 or ASQ H1331 sampling plans, with the final delivery consisting of signed hydrostatic test reports for each individual unit. The project is a total small business set-aside under NAICS code 541380 and will be performed in Norfolk, Virginia. Interested parties must respond by November 2, 2026. This effort is managed by the Department of Defense through the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Oxygen-Service Precision Cleaning and Pressure Testing

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Supply of Bench and Machine Table VisesThis subcontract involves the procurement of 200 units of Bench and Machine Table Vises to support prime contractors for the Department of Defense under the Construction and Equipment MRO SVC I contracts. The supplier is responsible for sourcing or manufacturing vises that strictly adhere to NSN 3460-00-221-1104 specifications. The contractor must ensure all items are packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. Additionally, the delivery must maintain full compliance with FAR 25.105 and DFARS 252.225-7059 regulations. The project falls under NAICS code 332510.

Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military packaging and transportation for prime contractors fulfilling DLA Troop Support supply contracts. The scope of work requires hardware to be packaged according to MIL-STD-2073-1E, marked per MIL-STD-129, and palletized in accordance with DLA requirement RP001. To comply with environmental restrictions, the use of non-plastic dunnage and wrap is mandatory. The service provider is responsible for the delivery of properly packaged and marked shipments to DLA Distribution San Joaquin located in Tracy, California. This opportunity is categorized under NAICS code 488510 and is associated with the Department of Defense. Interested parties should note the response deadline of October 27, 2026.

Freight Transportation Arrangement

POSTED

about 16 hours ago

DEADLINE

Supply of Oil Eliminators (NSN 4130010570766)This subcontract involves the supply of six oil eliminator units, specifically part numbers 364-35802 and 364-35802-000, which must be manufactured by or compatible with Johnson Controls Navy Systems, LLC. The hardware is intended for prime contractors fulfilling DLA Troop Support supply contracts under NAICS code 423830. Performance will take place in Tracy, California. The contract mandates strict adherence to NAVSEA 5100-003D regarding the prohibition of mercury and requires compliance with DFARS 252.225-7001 Buy American regulations. Additionally, the use of additive manufacturing is explicitly prohibited for the production of these units.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

Military-Grade Packaging and Freight ServicesThis subcontract for Military-Grade Packaging and Freight Services involves providing specialized packaging, marking, and palletization for prime contractors supporting DLA Troop Support projects. The scope of work requires the processing of 72 units of vises, ensuring all deliverables are packaged according to MIL-STD-2073-1E, marked per MIL-STD-129, and palletized using heat-treated, IPPC stamped wooden pallets in compliance with RP001. All materials used must be military-grade for wrapping and preservation. The project is managed under the Department of Defense through Construction & Equipment MRO SVC I. The final deliverables are to be shipped FOB Origin to New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 29, 2026, for this effort categorized under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 16 hours ago

DEADLINE

Supply of Bench and Machine Table VisesThis subcontract involves the supply of 72 specialized bench and machine table vises for prime contractors supporting Department of Defense projects via DLA Troop Support. The required hardware must strictly adhere to specification CID A-A-51123-D1 and NSN 3460-00-221-1104, featuring a 2.5-inch jaw width, depth, and opening, along with a detachable 360-degree swivel base. All units must be delivered to New Cumberland, Pennsylvania, and the provider must ensure full compliance with the Buy American and Balance of Payments programs. The procurement falls under NAICS code 332510 and is managed by Construction and Equipment MRO SVC I.

Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

VISE, BENCH AND MACHINE

Solicitation # SPE8E9-27-Q-0057

Solicitation SPE8E9-27-Q-0057 is a Firm Fixed Price request for quotations issued by DLA Troop Support Construction and Equipment MRO SVC I for the procurement of 72 units of Type 4/Size 1 bench and machine table mounting vises, NSN 3460-00-221-1104. The required vises must feature a detachable, bench-mounted 360-degree swivel base, a square body capable of being used on either side, on end, or in a horizontal position, and must adhere to technical specifications including a 2.500 inch jaw width, 1.500 inch jaw depth, and 2.500 inch jaw opening. All deliverables must meet the requirements of CID A-A-51123-D1, Table IV, and strictly prohibit the intentional addition of mercury or mercury-containing compounds. Delivery is required within 60 days after receipt of order to the DLA Distribution New Cumberland facility in Pennsylvania, with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, specifically requiring heat-treated wooden pallets with IPPC stamps for overseas shipment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and registration in the System for Award Management. This procurement is not a small business set-aside, and quotes must be submitted via the DLA Internet Bid Board System.

Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

VISE, BENCH AND MACHINE

Solicitation # SPE8E9-27-Q-0058

Solicitation SPE8E9-27-Q-0058 is a fixed-price request for quotation issued by the DLA Troop Support Construction and Equipment MRO SVC I for the procurement of 200 Type 4/Size 1 Machine Table and Bench Mounting Vises (NSN 3460-00-221-1104). The required hardware must feature a detachable bench-mounted 360-degree swivel base, a 2.5-inch jaw width and opening, and a 1.5-inch jaw depth, adhering to CID A-A-51123-D1 standards. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds to the supplies, with limited exceptions for specific functional components. Delivery is required within 60 days after receipt of order, with FOB Origin terms and inspection and acceptance occurring at the destination. Packaging and palletization must comply with RP001 DLA Packaging Requirements and MIL-STD-2073-1E, while marking must follow MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including requirements for the System for Award Management maintenance, Buy American and Balance of Payments Program, and specific cybersecurity protocols for Covered Defense Information. Invoicing and payment shall be processed electronically through the Wide Area WorkFlow system.

Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

ELIMINATOR, OIL

Solicitation # SPE8E9-26-T-2661

Solicitation SPE8E9-26-T-2661 is a request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of six oil eliminators under NSN 4130010570766. The requirement specifies part numbers 364-35802 and 364-35802-000 from Johnson Controls Navy Systems, LLC. Delivery is required by January 26, 2027, with a need ship date of November 23, 2026. The terms are FOB Origin, and the items are to be delivered to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. There is a specific environmental restriction to avoid plastics for wrapping and dunnage where possible. Technical compliance includes the prohibition of intentionally added mercury per NAVSEA 5100-003D and the requirement to remove government identification from non-accepted supplies. This is not a small business set-aside, and the government will not evaluate offers utilizing additive manufacturing processes. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E9-27-T-0263

Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 16 hours ago

DEADLINE

FACESHIELD, INDUSTRIAL

Solicitation # SPE8E9-27-T-0264

Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis small business set-aside subcontract, titled MIL-SPEC Packaging and Freight Services, is issued by Construction & Equipment MRO SVC I for the Department of Defense. The contractor is responsible for providing specialized packaging and transportation services for prime contractors working on DLA Troop Support procurement projects. Key deliverables include the secure packaging of fans and the coordination of freight delivery to DLA Distribution New Cumberland. To ensure compliance, all items must be packaged according to ASTM D3951 and RP001 standards and marked in accordance with MIL-STD-129. The service provider is required to utilize industrial palletizing equipment and MIL-SPEC labeling systems to meet these rigorous military specifications. The solicitation was posted on October 22, 2026, with a response deadline of October 29, 2026, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Vane Axial Fan Fabrication and AssemblyThis small business set-aside subcontract involves the manufacture and assembly of seven Vane Axial Fans, identified by NSN 4140-01-325-6972, for prime contractors supporting DLA Troop Support procurement projects. The scope of work includes the fabrication of fan housings and vane assemblies, as well as the integration of motors, all of which must adhere to the DLA Master List of Technical and Quality Requirements. Managed under the Department of Defense through Construction and Equipment MRO SVC I, the project requires strict adherence to CMMC Level 2 and ITAR/EAR compliance standards. Interested parties must respond by October 29, 2026, for this effort categorized under NAICS code 333414.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS