Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing and Quality Certification

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves performing First Article Testing and Quality Certification for prime contractors supporting the Department of Defense, specifically under the DLA Weapons Support Land Supplier Operations Vehicle Support agency. The primary objective is to validate components against QAP 16236 SQAP004423819 and FAR 52.209-4 standards, utilizing CMM and metrology equipment to ensure all tolerances align with Drawing 98897. The successful contractor is required to deliver a First Article Test Report and a Certification of Compliance. The work is designated under NAICS code 541380 and will be performed at Robins Air Force Base. Interested parties must adhere to the timeline established by the posting date of November 5, 2026, with a response deadline of November 16, 2026.

General Info

First Article Testing and Quality Certification for DoD components at Robins Air Force Base.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

541380 - Testing Laboratories and Services

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-2079.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONNECTING LINK, RIGID

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors on DLA Weapons Support Land Supplier Operations projects. Validates components against QAP 16236 SQAP004423819 and FAR 52.209-4. Utilizes CMM and metrology equipment to verify tolerances in Drawing 98897. Delivers First Article Test Report and Certification of Compliance.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

Edison Job Corps

POSTED

about 1 hour ago

DEADLINE

in about 12 hours

Emergency Final Cost Air Qual Test Z0320 Rochelle

Solicitation # B-54783

Solicitation B-54783 is an emergency procurement issued by the State of Illinois under the Property Management agency, specifically the BOPM41640 office. The contract is titled Emergency Final Cost Air Qual Test Z0320 Rochelle, indicating a requirement for air quality testing services located in Rochelle, Illinois. The solicitation was posted on November 5, 2026, with a response deadline set for November 24, 2026. The procurement process is managed by Scott Eldridge and Gina Jacaway, who serve as the Purchaser and State Purchasing Officer, respectively. While the solicitation is active, specific details regarding the statement of work, pricing, evaluation factors, and contract clauses are not currently detailed in the provided documentation. Interested parties can access further information through the Illinois BidBuy portal.

BOPM41640 - Property Management

POSTED

about 10 hours ago

DEADLINE

Geotechnical Laboratory TestingThis subcontract for Geotechnical Laboratory Testing involves providing specialized analysis of soil and rock samples for prime contractors working on University of Connecticut facility projects. The scope of work focuses on evaluating physical and mechanical properties, specifically shear strength, plasticity, and consolidation, ensuring all procedures adhere to ASTM International standards. The selected provider will be responsible for delivering comprehensive laboratory test results and detailed data sheets. Managed by DAS Procurement for the state of Connecticut, this opportunity falls under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline set for December 8, 2026. Interested parties can find further information through the CTSource Bid Board.

DAS Procurement

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Construction Inspection and Quality AssuranceThis subcontract for Construction Inspection and Quality Assurance involves providing site inspection and material testing services for prime contractors working on South Dakota Department of Game, Fish and Parks projects. The primary focus is conducting quality assurance for soil, steel, and concrete during the construction of a fish barrier. To ensure technical accuracy and safety, the contract requires that all work be performed by certified construction inspectors under the oversight of a Professional Engineer. The selected provider is responsible for delivering detailed inspection reports and formal certifications confirming that the construction complies with all design plans. This opportunity is issued by the South Dakota State Government under NAICS code 541380. Interested parties must submit their responses by the deadline of December 17, 2026.

South Dakota State Government

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Geotechnical and Subsurface Investigation ServicesThis subcontract for Geotechnical and Subsurface Investigation Services supports the Telfair Wheeler Airport Authority in Georgia. The scope of work involves performing subsurface explorations and detailed soil analysis to assist prime contractors with critical infrastructure projects, specifically focusing on runway rehabilitation and the construction of new hangars. The selected provider will be responsible for conducting soil borings and delivering comprehensive geotechnical engineering reports. These deliverables must include professional soil stability recommendations to ensure the structural integrity of the airport improvements. The solicitation was posted on November 5, 2026, with a response deadline of December 7, 2026, falling under NAICS code 541380.

Telfair Wheeler Airport Authority

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Accredited Environmental Testing LaboratoryThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, seeks an accredited environmental testing laboratory to provide analytical services for prime contractors working on Colchester Housing Authority residential projects. The selected provider will be responsible for performing laboratory analysis on samples for mold, lead, radon, asbestos, and PCBs, ensuring all results are delivered as certified reports. To qualify, the laboratory must maintain specific accreditations required by federal guidelines and the State of Connecticut for chemical and biological analysis. Interested parties should note the response deadline of November 19, 2026, and refer to NAICS code 541380 for the scope of work.

DAS Procurement

POSTED

about 15 hours ago

DEADLINE

Third-Party Source Inspection and Quality CertificationThis subcontract for Third-Party Source Inspection and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform source inspections and quality verification at manufacturer facilities, utilizing precision measurement tools to ensure strict compliance with MS35764H and MIL-DTL-45912C standards. Additionally, the contractor is responsible for validating SAE AS9003/ISO 9001 systems and ensuring packaging meets MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N requirements, culminating in the delivery of signed inspection reports and quality certifications. Managed by the Department of Defense under NAICS code 541380, the performance of this contract is centered in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract for the DLA Weapons Support Active Devices Division involves performing First Article Testing and quality validation for prime contractors. The scope of work requires validating manufactured units against TDP Rev A Gen 1 and verifying zero-based sampling results in accordance with MIL-STD-1916 or ASQ H1331. To ensure full compliance with QAP 16236, the provider must utilize precision metrology and electrical testing equipment, ultimately delivering a certified First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties should note the response deadline of November 16, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The project involves performing and documenting First Article Testing for prime contractors on aircraft component projects, specifically focusing on the validation of duct assemblies. The selected provider will use precision testing equipment to verify that the first production unit meets all technical drawings and government specifications, ensuring overall manufacturing process capability. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in New Cumberland. The primary deliverables include a certified First Article Test report and the validated first production unit. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

First Article Test (FAT) Validation ServicesThis subcontract for First Article Test Validation Services supports prime contractors delivering for the DLA Weapons Support Land Supply Chain. The selected provider is responsible for producing and delivering three FAT units of lot/item 3040/7196982 to Tinker AFB within a 120-day timeframe. The scope of work involves verifying material integrity and dimensional accuracy against the technical data package using CMM inspection equipment and metrology. The final deliverables include the three FAT units and a comprehensive validation report. To qualify for this effort, the contractor must meet strict cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. Performance will take place at Hill AFB under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Precision Component Inspection ServicesThe Precision Component Inspection Services subcontract involves providing destination-level quality assurance for prime contractors supporting the DLA Weapons Support Fluid Handling Division. Based at Tinker AFB, the selected provider will be responsible for conducting blow-through air tests to clear internal passages of obstructions and performing rigorous visual inspections of all internal and external passages using high-magnification tools. The primary objective is to verify that all components comply with the technical and quality requirements specified in the DLA Master List. To complete the scope of work, the contractor must deliver a formal inspection report and certification for the processed items. This requirement falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Dimensional Inspection and Certification ServicesThis subcontract for Dimensional Inspection and Certification Services supports prime contractors delivering DLA supply contracts through the Department of Defense. The scope of work involves performing dimensional conformance testing on 3,729 units, specifically inspecting Class 3A and 3B threads according to FED-STD-H28/20 and verifying identification markings per MIL-STD-130N. All work must be performed using precision gauging and thread measurement tools calibrated to federal standards. The service provider is required to maintain a quality management system certified under ISO 9001 or SAE AS9003. Key deliverables include detailed inspection reports and certifications of conformance. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Plain Seal Manufacturing and SupplyThis subcontract involves the manufacture and supply of 17 plain seals, identified by NSN 5330016989367, for prime contractors supporting the Department of Defense. The selected provider must ensure all seals are produced according to strict NSN specifications and packaged in medium duty waterproof, greaseproof, and opaque bags. Additionally, all items must be marked in accordance with MIL-STD-129, specifically including special marking code 20. The contract is managed by the DLA Weapons Support Land Supplier Opns Vehicle Spt and requires full compliance with DFARS 252.225-7001 Buy American regulations. Performance for this requirement will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense agency DLA Weapons Support Land Supplier Opns Vehicle Spt. The scope of work involves performing specialized military-grade packaging and marking, specifically adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Key technical requirements include the use of MIL-DTL-117 waterproof, greaseproof, and opaque bags for UV-susceptible items, the implementation of Do Not Bend handling protocols, and the final delivery of gaskets packaged for DLA Distribution. The project is categorized under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 5, 2026.

Freight Transportation Arrangement

POSTED

about 15 hours ago

DEADLINE

Asbestos-Free Gasket SupplierThis subcontract involves the manufacture and supply of 137 non-asbestos gaskets, identified by NSN 5330-00-397-4483, for the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt. The contractor is required to utilize precision cutting equipment and adhere strictly to the technical specifications of the NSN, the Buy American Act, and the RA001 DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 339991, with performance taking place in New Cumberland. The final delivery of the 137 finished gaskets is designated as FOB Origin. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Critical Application Gaskets (NSN 5330016626649)This subcontract involves the supply of 268 critical application gaskets for prime contractors supporting DLA supply contracts. The items must be manufactured or sourced to meet TE Connectivity Corporation part number DT8P-L012-GKT specifications. Strict packaging and marking requirements are in place, necessitating the use of waterproof, greaseproof, opaque bags according to MIL-DTL-117, Type II, Class C, Style 1, with marking compliant with MIL-STD-129. The contract is managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support. Compliance with the Buy American Act and DFARS 252.204-7012 cybersecurity standards is mandatory. Delivery of the 268 gaskets is required FOB Origin, with performance based in New Cumberland.

All Other Plastics Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Vehicular Insulation Panels (NSN 2540-01-570-7862)This subcontract involves the supply of 24 specialized vehicular insulation panels for prime contractors supporting DLA Weapons Support Land Supplier Operations. The required components must meet NSN 2540-01-570-7862 and Pierce Manufacturing Inc part number 1392148. Performance of the contract takes place in New Cumberland, Pennsylvania, with delivery terms set as FOB Origin. The contractor is responsible for manufacturing or sourcing the panels in strict accordance with the Buy American Act and the Berry Amendment. Additionally, all shipments must adhere to MIL-STD-129/RP001 packaging standards. This procurement falls under NAICS code 321999 and is managed by the Department of Defense.

All Other Miscellaneous Wood Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract involves providing First Article Testing services for the Department of Defense, specifically supporting the DLA Weapons Support Land Supplier Operations Vehicle Support. The primary objective is to validate the Control Assembly, Push- (NSN 2590010784349) by testing the first production unit against strict technical specifications. This process utilizes specialized measurement tools and testing rigs to certify the component as a Critical Application Item. The scope of work requires the delivery of a validated prototype and a comprehensive FAT report. Performance will take place in Anniston, Alabama, under NAICS code 541330. The solicitation was posted on November 5, 2026, with a response deadline set for November 16, 2026.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Control Assembly, Push- (NSN 2590010784349) SupplyThis subcontract involves the procurement of 22 units of the Control Assembly, Push- (NSN 2590010784349) to support prime contractors for the Department of Defense, specifically under the DLA Weapons Support Land Supplier Operations. The contractor is responsible for manufacturing or sourcing these assemblies to meet strict technical specifications for Critical Application Items, with a final delivery deadline of March 10, 2028. Performance for this contract will take place in Anniston, Alabama. Compliance is a central requirement of this agreement, specifically regarding DFARS 252.204-7012 for cybersecurity reporting and DFARS 252.223-7008 concerning the use of hexavalent chromium. The project falls under NAICS code 332999 and was posted on November 5, 2026, with a response deadline of November 16, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Specialized Military Packaging ServicesThis subcontract for Specialized Military Packaging Services supports the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. The contractor is responsible for providing military-grade packaging, sealing, and marking for prime contractors, with performance taking place in New Cumberland. Key technical requirements include sealing items in MIL-DTL-117 Type II Class C Style 1 opaque bags to protect against UV deterioration, adhering to MIL-STD-2073-1E for packaging, and following MIL-STD-129 for marking. The scope of work further includes palletization according to RP001 and the handling of hazardous materials per IP025, culminating in the delivery of fully packaged and palletized shipments. This opportunity falls under NAICS code 561910 and was posted on November 5, 2026, with a response deadline of November 16, 2026.

Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

Supply of Gaskets (NSN 5330-01-654-9835)This subcontract involves the procurement of 51 units of Gasket, NSN 5330-01-654-9835, Part Number BL-19002-1, to support DLA Weapons Support Land Supplier Opns Vehicle Spt projects. The selected provider is responsible for manufacturing or sourcing the components in strict accordance with RA001 technical requirements and FAR 52.246-1 quality standards. The agreement mandates full compliance with the Buy American Act and DFARS cybersecurity regulations. All units must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The opportunity is categorized under NAICS code 339999 and is managed by the Department of Defense.

All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

Specialized Industrial Gasket Supplier (NSN 5330-00-763-0592)This subcontract involves the manufacture or procurement of 61 specialized industrial gaskets for prime contractors supporting Department of Defense supply contracts. The gaskets must strictly adhere to NSN 5330-00-763-0592 and Falk Corp part number 706757. To ensure safety and regulatory compliance, all materials must be mercury-free and asbestos-free in accordance with FED-STD-313. The contractor is responsible for packaging the items in waterproof and greaseproof bags following MIL-DTL-117, Type II, Class C, Style 1 standards, with marking requirements meeting MIL-STD-2073-1E and MIL-STD-129. Once processed, the 61 packaged gaskets are to be delivered to the DLA Distribution center located in New Cumberland, Pennsylvania.

All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Plain Encased Seals (NSN 5330-01-134656-0)This subcontract involves the manufacture or procurement of 639 plain encased seals under NSN 5330-01-134656-0 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Opns Vehicle Spt. The contractor must ensure all units conform to strict technical specifications and meet Engineering Support Activity acceptability standards. Compliance with the Buy American and Balance of Payments Program per DFARS 252.225-7001 is mandatory. The contract is categorized under NAICS code 325211, with performance taking place in New Cumberland, Pennsylvania. Delivery of the seals is coordinated via FOB Origin.

Plastics Material and Resin Manufacturing

POSTED

about 15 hours ago

DEADLINE

Gasket Supplier (NSN 5330-01-728-1867)This subcontract involves the manufacture or sourcing of two gaskets under NSN 5330-01-728-1867 for prime contractors supporting DLA Weapons Support Land Supplier Operations. The supplier must ensure all hardware is mercury-free and provide comprehensive supply chain traceability documentation. Strict adherence to military standards is required, specifically MIL-DTL-117 for waterproof, greaseproof, and opaque packaging, as well as MIL-STD-129 and MIL-STD-2073-1E for marking. The completed items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. This opportunity falls under NAICS code 339999 and is managed by the Department of Defense. Interested parties must respond by November 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Third-Party Source Inspection and Quality Certification

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Production Lot Testing and Quality Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Contractor First Article Testing (FAT)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Zero-Based Sampling Inspection Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

First Article Test (FAT) and Certification

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

First Article Test (FAT) Support & Certification

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

First Article Testing (FAT) and Validation

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 15 hours ago

DEADLINE

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

Aerospace Fastener Inspection and Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

First Article Testing and Validation

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Non-Destructive Testing (NDT) - Penetrant Inspection

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS