Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) and Validation

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing (FAT) and Validation supports the DLA Weapons Support Electrical Devices Division at Robins Air Force Base. The selected contractor will perform first article testing and fit verification for prime contractors, which includes producing first article exhibits and executing fit verification on the next higher assembly. Key deliverables include process operation sheets and comprehensive test reports generated in accordance with DI-NDTI-80809B. To qualify for this engagement, contractors must hold JCP certification and maintain CMMC Level 2 compliance to ensure the secure handling of technical data. The project falls under NAICS code 541380, with a response deadline of November 16, 2026. The final requirement for completion is the delivery of a detailed Test/Inspection Report.

General Info

Subcontract for FAT and validation at Robins AFB requiring JCP and CMMC Level 2.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M8-27-T-0631.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, PRINTED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs first article testing and fit verification for prime contractors on DLA Weapons Support projects. Produces first article exhibits and executes fit verification on the next higher assembly. Generates test reports per DI-NDTI-80809B and provides process operation sheets. Requires JCP certification and CMMC Level 2 for handling technical data. Delivers the completed Test/Inspection Report.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

Edison Job Corps

POSTED

about 2 hours ago

DEADLINE

in about 12 hours

Emergency Final Cost Air Qual Test Z0320 Rochelle

Solicitation # B-54783

Solicitation B-54783 is an emergency procurement issued by the State of Illinois under the Property Management agency, specifically the BOPM41640 office. The contract is titled Emergency Final Cost Air Qual Test Z0320 Rochelle, indicating a requirement for air quality testing services located in Rochelle, Illinois. The solicitation was posted on November 5, 2026, with a response deadline set for November 24, 2026. The procurement process is managed by Scott Eldridge and Gina Jacaway, who serve as the Purchaser and State Purchasing Officer, respectively. While the solicitation is active, specific details regarding the statement of work, pricing, evaluation factors, and contract clauses are not currently detailed in the provided documentation. Interested parties can access further information through the Illinois BidBuy portal.

BOPM41640 - Property Management

POSTED

about 11 hours ago

DEADLINE

Geotechnical Laboratory TestingThis subcontract for Geotechnical Laboratory Testing involves providing specialized analysis of soil and rock samples for prime contractors working on University of Connecticut facility projects. The scope of work focuses on evaluating physical and mechanical properties, specifically shear strength, plasticity, and consolidation, ensuring all procedures adhere to ASTM International standards. The selected provider will be responsible for delivering comprehensive laboratory test results and detailed data sheets. Managed by DAS Procurement for the state of Connecticut, this opportunity falls under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline set for December 8, 2026. Interested parties can find further information through the CTSource Bid Board.

DAS Procurement

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Construction Inspection and Quality AssuranceThis subcontract for Construction Inspection and Quality Assurance involves providing site inspection and material testing services for prime contractors working on South Dakota Department of Game, Fish and Parks projects. The primary focus is conducting quality assurance for soil, steel, and concrete during the construction of a fish barrier. To ensure technical accuracy and safety, the contract requires that all work be performed by certified construction inspectors under the oversight of a Professional Engineer. The selected provider is responsible for delivering detailed inspection reports and formal certifications confirming that the construction complies with all design plans. This opportunity is issued by the South Dakota State Government under NAICS code 541380. Interested parties must submit their responses by the deadline of December 17, 2026.

South Dakota State Government

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Geotechnical and Subsurface Investigation ServicesThis subcontract for Geotechnical and Subsurface Investigation Services supports the Telfair Wheeler Airport Authority in Georgia. The scope of work involves performing subsurface explorations and detailed soil analysis to assist prime contractors with critical infrastructure projects, specifically focusing on runway rehabilitation and the construction of new hangars. The selected provider will be responsible for conducting soil borings and delivering comprehensive geotechnical engineering reports. These deliverables must include professional soil stability recommendations to ensure the structural integrity of the airport improvements. The solicitation was posted on November 5, 2026, with a response deadline of December 7, 2026, falling under NAICS code 541380.

Telfair Wheeler Airport Authority

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Accredited Environmental Testing LaboratoryThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, seeks an accredited environmental testing laboratory to provide analytical services for prime contractors working on Colchester Housing Authority residential projects. The selected provider will be responsible for performing laboratory analysis on samples for mold, lead, radon, asbestos, and PCBs, ensuring all results are delivered as certified reports. To qualify, the laboratory must maintain specific accreditations required by federal guidelines and the State of Connecticut for chemical and biological analysis. Interested parties should note the response deadline of November 19, 2026, and refer to NAICS code 541380 for the scope of work.

DAS Procurement

POSTED

about 15 hours ago

DEADLINE

Third-Party Source Inspection and Quality CertificationThis subcontract for Third-Party Source Inspection and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform source inspections and quality verification at manufacturer facilities, utilizing precision measurement tools to ensure strict compliance with MS35764H and MIL-DTL-45912C standards. Additionally, the contractor is responsible for validating SAE AS9003/ISO 9001 systems and ensuring packaging meets MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N requirements, culminating in the delivery of signed inspection reports and quality certifications. Managed by the Department of Defense under NAICS code 541380, the performance of this contract is centered in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract for the DLA Weapons Support Active Devices Division involves performing First Article Testing and quality validation for prime contractors. The scope of work requires validating manufactured units against TDP Rev A Gen 1 and verifying zero-based sampling results in accordance with MIL-STD-1916 or ASQ H1331. To ensure full compliance with QAP 16236, the provider must utilize precision metrology and electrical testing equipment, ultimately delivering a certified First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties should note the response deadline of November 16, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The project involves performing and documenting First Article Testing for prime contractors on aircraft component projects, specifically focusing on the validation of duct assemblies. The selected provider will use precision testing equipment to verify that the first production unit meets all technical drawings and government specifications, ensuring overall manufacturing process capability. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in New Cumberland. The primary deliverables include a certified First Article Test report and the validated first production unit. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

First Article Test (FAT) Validation ServicesThis subcontract for First Article Test Validation Services supports prime contractors delivering for the DLA Weapons Support Land Supply Chain. The selected provider is responsible for producing and delivering three FAT units of lot/item 3040/7196982 to Tinker AFB within a 120-day timeframe. The scope of work involves verifying material integrity and dimensional accuracy against the technical data package using CMM inspection equipment and metrology. The final deliverables include the three FAT units and a comprehensive validation report. To qualify for this effort, the contractor must meet strict cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. Performance will take place at Hill AFB under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Precision Component Inspection ServicesThe Precision Component Inspection Services subcontract involves providing destination-level quality assurance for prime contractors supporting the DLA Weapons Support Fluid Handling Division. Based at Tinker AFB, the selected provider will be responsible for conducting blow-through air tests to clear internal passages of obstructions and performing rigorous visual inspections of all internal and external passages using high-magnification tools. The primary objective is to verify that all components comply with the technical and quality requirements specified in the DLA Master List. To complete the scope of work, the contractor must deliver a formal inspection report and certification for the processed items. This requirement falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

Dimensional Inspection and Certification ServicesThis subcontract for Dimensional Inspection and Certification Services supports prime contractors delivering DLA supply contracts through the Department of Defense. The scope of work involves performing dimensional conformance testing on 3,729 units, specifically inspecting Class 3A and 3B threads according to FED-STD-H28/20 and verifying identification markings per MIL-STD-130N. All work must be performed using precision gauging and thread measurement tools calibrated to federal standards. The service provider is required to maintain a quality management system certified under ISO 9001 or SAE AS9003. Key deliverables include detailed inspection reports and certifications of conformance. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

Same awarding agency

Supply of Electronic Pressure Switches (NSN 5930-01-692-5367)This subcontract involves the supply of 11 Electronic Pressure Switches, identified by NSN 5930-01-692-5367, for prime contractors supporting the DLA Weapons Support Electrical Devices Division. All units must adhere to RA001 technical requirements and be packaged, preserved, and marked in accordance with MIL-DTL-28786, MIL-STD-2073-1E, and MIL-STD-129 standards. The final shipment is to be delivered to DLA Distribution San Joaquin in Tracy, California. To be eligible for this contract, the provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The opportunity falls under NAICS code 335313, with a response deadline set for November 16, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Pressure Switches (NSN 5930-01-455-1421)This subcontract involves the manufacture or procurement of two specialized pressure switches meeting NSN 5930-01-455-1421 specifications for the DLA Weapons Support Electrical Devices Division. The contractor must ensure strict adherence to the Buy American Act and Berry Amendment, with all items packaged according to DLA standard RP001 and delivered FOB Origin to DLA Distribution San Diego. Compliance requirements include a CMMC Level 2 self-assessment and the proper handling of Covered Defense Information per RD002. The opportunity is categorized under NAICS code 335931, with a response deadline of November 16, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

Military Grade Packaging and Preservation ServicesThis subcontract for Military Grade Packaging and Preservation Services supports the Department of Defense through the DLA Weapons Support Electrical Devices Division. The contractor is responsible for providing specialized packaging, preservation, and marking for six individually packaged rotary switches. All work must be performed in accordance with strict military specifications, specifically MIL-DTL-28786, MIL-STD-2073-1E, and MIL-STD-129, utilizing QUP 001, Preservation Method ZZ, and Cleaning/Drying 1. The project requires the use of military-specification wrapping and cushioning materials to ensure the integrity of the electrical devices. Performance of these services will take place in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, under NAICS code 561910.

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

Rotary Switch Supplier (NSN 5930-00-308-7395)This subcontract involves the supply of six rotary switches, identified by NSN 5930-00-308-7395, for prime contractors working on DLA Weapons Support electrical devices projects. The supplier is responsible for manufacturing or sourcing switches that strictly adhere to MIL-DTL-3786/4P and MIL-DTL-3786K specifications. Quality assurance must be maintained through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, with all units delivered ready for destination inspection in Tracy. To be eligible for this contract, the provider must demonstrate rigorous cybersecurity posture by maintaining CMMC Level 2 and NIST SP 800-171 compliance. The opportunity falls under NAICS code 334419 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 16, 2026.

Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supplier of Thermostatic Switch (NSN 5930-01-435-8137)This subcontract involves the supply of a thermostatic switch, identified by NSN 5930-01-435-8137, for the Department of Defense under the DLA Weapons Support Electrical Devices Division. The selected supplier is responsible for manufacturing or sourcing the component, ensuring it is entirely free of mercury or mercury-containing compounds. Delivery consists of one unit shipped FOB Origin to the DLA Distribution DDSP in New Cumberland, Pennsylvania. Strict adherence to military standards is required, specifically MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking. Additionally, the contractor must maintain full compliance with the Buy American Act and DFARS telecommunications regulations. The opportunity falls under NAICS code 334512, with a response deadline set for November 16, 2026.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 16 hours ago

DEADLINE

Supply of Rotary Switches (NSN 5930015084072)This subcontract involves the procurement of 15 rotary switches, identified by NSN 5930015084072, to support prime contractors delivering to the Department of Defense DLA Weapons Support Electrical Devices Division. The selected supplier is responsible for sourcing or manufacturing the specific parts and ensuring delivery to Tracy, California, by the established deadline. Logistics for this contract are managed through Government-Arranged Transportation under the First Destination Transportation program. To ensure proper payment and tracking, the supplier must submit all receiving reports and invoices electronically via the Wide Area Workflow system.

Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support Electrical Devices Division. The contractor is responsible for providing military-grade packaging, marking, and labeling for 40 units of rotary switches. All work must be performed in strict accordance with MIL-DTL-28786 for packaging, MIL-STD-129 for markings, and MIL-STD-2073-1E for general processes, utilizing specialized military-grade materials and equipment. The project is categorized under NAICS code 561910 and will be executed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, for this specific requirement to ensure the prime contractor meets the delivery standards for these critical electrical device components.

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

Supplier of Rotary Switches (NSN 5930-01-454-2915)This subcontract involves the manufacture or sourcing of 40 rotary switches, specifically NSN 5930-01-454-2915 matching Electro Switch LLC part number 121102LZ, for the Department of Defense DLA Weapons Support Electrical Devices Division. The selected supplier will provide these units to prime contractors, with delivery terms set as FOB Origin and performance based in New Cumberland. The contractor must strictly adhere to the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements. Additionally, the contract explicitly prohibits the use of mercury-containing compounds in the production or sourcing of the switches.

Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

Pressure Switch Component SupplierThis subcontract involves the supply of 35 pressure switches, identified by NSN 5930-00-615-4520, to prime contractors supporting Department of Defense contracts for the DLA Weapons Support Electrical Devices Division. The supplier is responsible for delivering the units FOB Origin to DLA Distribution New Cumberland. Strict adherence to military standards is required, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the supplier must provide hazard warning labels and Material Safety Data Sheets in accordance with 29 CFR 1910.1200 for any hazardous materials included in the shipment.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

Toggle Switch Supply (MS21357-231)This subcontract involves the supply of 175 toggle switches, part number MS21357-231 and NSN 5930010558460, to support prime contractors under DLA Weapons Support supply contracts. The components must meet Critical Application Item quality and reliability standards and be delivered to the designated DLA facility at Hill AFB. Managed by the Department of Defense under the DLA Weapons Support Electrical Devices Division, the contract requires strict adherence to RP001 packaging requirements for all shipments. The procurement falls under NAICS code 334411, with a response deadline set for November 16, 2026.

Electron Tube Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supplier of Liquid Flow Switches (NSN 5930011574553)This subcontract involves the supply of six liquid flow switches for prime contractors supporting Defense Logistics Agency hardware procurements. The supplier is responsible for manufacturing or procuring units that strictly adhere to the specifications for NSN 5930011574553, ensuring all hardware meets DLA Technical/Quality Requirements and DLAD standards. The project is managed under the DLA Weapons Support Electrical Devices Division of the Department of Defense, with performance taking place in New Cumberland. Logistics are handled via the First Destination Transportation program for Government-Arranged Transportation. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 335314.

Relay and Industrial Control Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Thermostatic Switches (NSN 5930-00-0612357)This subcontract involves the supply of 24 thermostatic switches, identified by NSN 5930-00-0612357, for prime contractors working on projects for the Department of Defense DLA Weapons Support Electrical Devices Division. All provided components must strictly adhere to the DLA Master List of Technical and Quality Requirements. The place of performance for this contract is located at Tinker AFB. Materials must be packaged and labeled in accordance with RP001, ASTM D3951, and MIL-STD-129, with specific adherence to TQ requirement IP025 for the handling of hazardous materials. Delivery of the units is designated as FOB Origin. The procurement falls under NAICS code 335312.

Motor and Generator Manufacturing

POSTED

about 16 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

Aerospace Fastener Inspection and Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

First Article Testing and Validation

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Non-Destructive Testing (NDT) - Penetrant Inspection

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Critical Characteristics Inspection Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

CALIBRATION SET, SEC

Solicitation # SPE4A5-26-T-125J

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

First Article Testing (FAT) and Certification

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

First Article Testing (FAT) Laboratory Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

First Article Testing (FAT) for Gate Valves

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

Analytical Laboratory Services

W2SN Endist Honolulu

POSTED

about 21 hours ago

DEADLINE

NDT and Special Process Inspection for Drag Chute Adapters

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Inspection and Testing of F108 Fan Disks/Hubs

Ok DLA Aviation At Oklahoma City

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS