Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

First Article Testing & Reporting (FATR) Services

Active

Federal

Response Deadline08/21/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of comprehensive first article inspection and testing for defense electronics, ensuring 100% verification of all physical and functional characteristics, proper packaging, preservation standards, and full calibration traceability. The contractor must deliver a complete First Article Test Report (FATR) that documentation every aspect of compliance with technical and quality requirements, serving as formal validation that the product meets all specified defense standards prior to production rollout. Performance is mandated at Fort Bliss, Texas, with a response deadline of August 21, 2026, and falls under the NAICS code 334511 for electronic component and product manufacturing. This is a subcontract opportunity managed by the Department of Defense through the Defense Logistics Agency Aviation at Huntsville, with no set-aside classification indicated. All deliverables must adhere strictly to federal defense quality protocols and demonstrate full traceability and documentation integrity to support supply chain assurance for critical defense systems.

General Info

First article inspection and testing for defense electronics at Fort Bliss, Texas, due August 21, 2026, with full traceability and FATR compliance.

Agency

Department Of Defense → Al DLA Aviation At HuntsvilleView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Fort Bliss, TX, 79916, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 09:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Al DLA Aviation At Huntsville

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform full first article inspection and testing of defense electronics, including 100% verification of physical and functional characteristics, packaging, preservation, and calibration traceability. Deliver a complete First Article Test Report (FATR).

Similar Contracts

Same NAICS industry code

Precision Manufacturing of NRP Command ModuleThe contract entails the precision manufacturing of three NRP Command Modules identified by NSN 4120016579196, requiring adherence to strict technical specifications that likely involve advanced electronic and mechanical systems. Work must be performed at the New Cumberland facility with a ZIP code of 17070-5002, under the oversight of the Department of Defense's DDSP New Cumberland Facility. The solicitation is classified as a subcontract with no set-aside designation, and it falls under the NAICS code 334511, which corresponds to the manufacturing of navigation, guidance, control systems, and instrumentation. The opportunity was posted on July 22, 2026, with a firm response deadline of August 3, 2026, indicating a narrow window for qualified vendors to submit proposals. All deliverables must meet exacting military standards, and performance is expected to align with the demanding requirements typical of defense-grade components.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Supply of Interface Units (Automated Components)The contract concerns the manufacture and delivery of 205 automated interface units identified by NSN 7025015869193, with strict adherence to military specifications governing design, performance, and quality. Each unit must be properly packaged and labeled in accordance with defense standards, and any applicable hazardous material handling procedures must be followed throughout production and logistics. The work is to be performed under a subcontract, with the place of performance specified as Tracy, California, at ZIP code 95304-5000. The solicitation was posted on July 22, 2026, and bids must be submitted by August 3, 2026. The NAICS code 334511 confirms the nature of the industry as electronic component and product manufacturing. The contracting entity is the Department of Defense under the office of Construction & Equipment T & IFO EQ, though specific point of contact information is not provided. The official solicitation can be accessed via the DIBBS platform using the provided link.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 16 hours ago

DEADLINE

TRANSDUCER, FORCE LIThis contract, issued under solicitation SPE4A6-26-T-09CB by the Defense Logistics Agency, calls for six units of a force transducer with part number 2586423 and NSN 6615-00-086-7995, supplied by approved vendors including Honeywell International Inc., Aero International LLC, and Moser Screw Machine Products Division. The item is classified as a critical application product and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific packaging, marking, and inspection protocols. All supplies must conform to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special marking code 03-03 Method 50, and palletization in accordance with DLA packaging requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as specified. The contract includes a separate first article test line item requiring one unit to be delivered for testing, with no separate charge assumed unless otherwise cited, and failure to address this line item may result in evaluation under the assumption of no additional cost. Delivery is due within 583 days from contract award, with FOB origin terms, and the item must be shipped to the DLA Distribution Depot at Tinker AFB, Oklahoma. The contract is a total small business set-aside under NAICS code 334511, with cybersecurity requirements governed by CMMC Level 2 self-assessment, though unique identification is waived per customer request. Measuring and test equipment must be calibrated and documented, and all data handling complies with covered defense information rules. The response deadline was July 30, 2026, with award anticipated for delivery starting January 10, 2027, and the original required delivery date set for September 7, 2027.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

RESUSCITATOR, HAND OPERThe contract specifies the procurement of a hand-operated resuscitator designed for infant use, featuring a disposable single-shutter valve system, an integrated handle, and a thin-walled compression bag with a medication port. Each unit is packaged individually in a resealable plastic carrying bag and color-coded for easy identification as infant size, with the entire order consisting of a single package containing twelve units. The device must comply with strict packaging standards, including sealed unit containers that protect against damage and commercial shipping containers suitable for safe delivery by common carriers at the lowest cost to the specified delivery point in APO, 09227-0000. All items must be marked in accordance with Medical Marking Standard No. 1, replacing any prior reference to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The unit of issue is one package containing twelve resuscitators, and the product falls under the NSN 6515-01-610-7720. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, applicable as of the solicitation or award date, whichever controls. Government-specific packaging and identification standards apply, including the removal of government identification from non-accepted supplies, and the contract is subject to RD003, indicating potential defense information coverage. The solicitation was issued under SPE2DS-26-T-260C with a response deadline of July 28, 2026, and requires delivery within 84 days of award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

COMPUTER SUBASSEMBLThis contract pertains to the procurement of computer subassemblies under solicitation SPE8EN-26-T-2652, with a total quantity of 21 units to be delivered FOB origin within 167 days, with a required ship date of January 18, 2027, and an original delivery deadline of November 22, 2026. The item is identified by NSN 7050-01-566-0685 and is associated with specific part numbers from Schneider Electric USA, Inc. and Plainville Electrical Products Company. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional use in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The contractor must also maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance, and covered defense information may apply, requiring adherence to associated security protocols. Delivery is to be made to DLA Distribution San Diego at the specified address, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All markings, labeling, and unit of issue must conform to contract specifications, referencing the DLA unit of issue guidelines.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 16 hours ago

DEADLINE

ARM, POSITION FEEDBAThis contract pertains to the procurement of a single unit of an item identified by NSN 6320013438191 and part number 1819469, designated as ARM, POSITION FEEDBACK, under solicitation SPE4A0-26-T-3991. Delivery is required within five days of contract award, with FOB origin terms and inspection and acceptance performed at the destination. The item must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including the special fragile marking code 01. Packaging and preservation must exclude mercury or mercury-containing compounds entirely, except for specific functional components like batteries or sensors explicitly authorized by NAVSEA, and all preservation methods must adhere to IP056 prohibitions. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03 from August 2016, though item unique identification is not required. The contractor must employ a zero-defect sampling plan consistent with MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery destination is Fort Stewart, Georgia, with shipment to be sent by the fastest traceable method, explicitly excluding parcel post, and must be palletized according to DLA packaging requirements. The contractor must also maintain compliance with CMMC Level 2 self-assessment requirements for cybersecurity. Physical identification of the bare item must be performed in accordance with RQ017, and all technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements accessible via the DLA website, with revisions controlled by the solicitation issue date. The item is governed by the Department of Defense's Aviation Supply Chain ESOC Buys office, with Danita Davis as the point of contact, and a final delivery deadline of July 17, 2026. No quantity variance is permitted, and all documentation and compliance obligations are binding as specified in the contract’s technical and quality provisions.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

MWIR Thermal Imaging Camera SupplyThe Naval Research Laboratory is seeking a subcontract for the procurement of a high-performance FLIR X6983HS mid-wave infrared thermal imaging camera featuring a 640x512 Indium Antimonide detector, a 10GigE/CXP interface, and a 1004Hz frame rate. This system is intended for advanced thermal imaging applications requiring exceptional sensitivity, rapid capture rates, and reliable high-bandwidth data transmission. The contract is classified as a subcontract under NAICS code 334511, which pertains to the manufacturing of commercial and industrial instrumentation, and is aimed at supporting Department of Defense research and development initiatives. Performance of the work is designated for Washington, D.C., with a delivery address of 20375. The solicitation was posted on July 22, 2026, with a tightly constrained response deadline of July 24, 2026, indicating an urgent requirement for qualified vendors capable of delivering certified hardware to precise technical specifications. No set-aside provisions are designated, making the opportunity open to all eligible contractors. The procurement is critical for mission-critical imaging systems, and successful bidders must demonstrate proven capability in supplying high-speed MWIR cameras with the specified detector technology and interface standards. Bidders are required to align their proposals with the technical parameters and delivery expectations outlined in the solicitation to meet the laboratory’s operational and developmental needs.

Naval Research Laboratory

POSTED

about 21 hours ago

DEADLINE

Spacecraft Integration and Environmental TestingThe contract requires the performance of spacecraft-level integration and environmental testing to verify flight readiness in accordance with NASA standards, specifically including thermal vacuum, vibration, and EMI/EMC testing. These tests are critical to ensuring the spacecraft can endure the extreme conditions of launch and space operations, and all activities must meet rigorous technical and procedural requirements set by the National Aeronautics and Space Administration. The work is designated as a subcontract and is being managed by NASA Langley Research Center, with performance expected at the facility in Hampton. The solicitation was posted on July 22, 2026, and responses are due by September 4, 2026, with the North American Industry Classification System code 334511 indicating applicability to communication equipment manufacturing, though the scope is focused on aerospace system integration and test services.

NASA Langley Research Center

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Siren Amplifier and RTU Assembly SupplyThe contract entails the supply of two OEM Siren Amplifier and RTU Assemblies, part number 44169, designed to natively interface with the Motorola APX6500 O5 control head and deliver integrated public address and warning tone functionality alongside remote telemetry unit operations. These assemblies are critical components for emergency communication systems and must meet strict interoperability standards to ensure seamless operation within existing radio infrastructure. The procurement is structured as a subcontract under a Total Small Business Set-Aside, indicating that only certified small businesses are eligible to bid, in accordance with FARS 19.5 and the NAICS code 334511 for communication equipment manufacturing. The solicitation was posted on July 22, 2026, with a response deadline of August 10, 2026, at 5:00 PM, and the place of performance is designated as Luke Air Force Base with a ZIP code of 85309. The contracting agency is listed as FA4887 56 Cons Cc under the Department of Defense, though specific point of contact details are not provided. The contract does not include a solicitation number and is accessible via the SAM.gov platform, reflecting its federal procurement nature. All deliverables must be fulfilled in compliance with defense specifications and delivered to meet operational readiness requirements at the specified location.

FA4887 56 Cons Cc

POSTED

about 21 hours ago

DEADLINE

Supply of FEEDBACK UNIT (P/N 8748-050-OAE, NSN 5998-99-317-5395)The contract requires the manufacture or supply of 15 to 30 mission-critical electronic feedback units with part number 8748-050-OAE and NSN 5998-99-317-5395, under a sole-source justification due to the absence of technical data and the lack of any alternative sources. These units are essential for operational systems with no viable substitutes, making this procurement critical for continued mission readiness. The solicitation is structured as a subcontract with a Total Small Business Set-Aside designation, meaning only small business concerns are eligible to compete, in accordance with FAR 19.5. The North American Industry Classification System code is 334511, indicating the work falls under the manufacturing of electronic components and products. The opportunity was posted on July 22, 2026, with submissions due by August 4, 2026, and performance is to be carried out at Curtis Bay, Maryland, with ZIP code 21226. The contracting office is the SFLC Procurement Branch 3 under the Department of Homeland Security, and while specific contact information is not provided, the opportunity is accessible through the SAM.gov platform. This procurement is time-sensitive and exclusively reserved for small businesses capable of fulfilling the highly specialized technical requirements without access to replacement components or alternative suppliers.

Sflc Procurement Branch 3(00040)

POSTED

about 21 hours ago

DEADLINE

N0038326PR0R696_FMSNAVSUP WSS Philadelphia is proceeding with a sole source procurement to repair six Direction Finder SE units, identified by NSN 7R 5826 014782375 and part number 622-0902-206, under a Foreign Military Sales program. The repair work is designated as FMS REPAIR and must be performed exclusively by ROCKWELL COLLINS, INC. (CAGE 84T51), the original manufacturer, due to the RMC code "3C" which mandates direct manufacturer involvement. The government has determined that competitive sourcing is not feasible because the technical data required for alternative bids is unavailable, not economically obtainable, and cannot be adequately described in specifications. This procurement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302-1, and the sole source designation is formally approved with no alternative suppliers capable of meeting requirement needs. The solicitation is being issued under number N0038326QN124 with a planned issue date of 20 July 2026 and a proposal deadline of 20 August 2026. While this notice is not a formal request for competitive proposals, any responses received within five days of publication will be reviewed to assess potential for competition, though none are expected to satisfy requirements. Only electronic submissions via email to the designated Contract Specialist, Sam Hojnowski, are accepted; no hard copies or phone inquiries will be considered. The procurement is not set aside for small businesses and uses electronic procedures exclusively. Any company not previously approved as a source must submit a Source Approval Request, but the timeline will not be extended to accommodate such submissions. The place of performance is FOB origin, meaning delivery responsibility transfers at the manufacturer’s shipping point.

Navsup Weapon Systems Support

POSTED

about 21 hours ago

DEADLINE

7G--Special Notice of Intent to Sole Source Award The U.S. Fish and Wildlife Service Communications Branch intends to award a sole source firm fixed price contract to Biomark, LLC, under the authority of FAR subpart 13.106-1(b)(1)(i) and (ii), for the procurement of PIT tag interrogation equipment compatible with existing systems in the Columbia River Basin. This requirement, classified under NAICS code 334511 and PSC code 7G22, is justified because Biomark is the sole vendor capable of providing equipment that interoperates with the current proprietary hardware, software, and CPTE-approved PIT tags essential for uninterrupted fish monitoring operations. The acquisition falls within the Simplified Acquisition Threshold of $250,000 and is necessary to maintain compliance with federal and tribal monitoring standards, particularly for tracking Chinook Salmon and Steelhead during critical migration periods from September to October. Performance will involve delivery and on-site installation at Dworshak National Fish Hatchery in Idaho, with full integration into the PTAGIS data reporting system. The notice is not a solicitation, but interested parties may submit a statement of capabilities via email to carter_duke@ios.doi.gov by July 28, 2026, demonstrating that competition would be advantageous to the government; however, any costs incurred in preparing such submissions are the respondent’s sole responsibility, and no telephone inquiries will be honored. The contracting officer for this action is Solmaz Salih, with program oversight by John Erhardt, both based in Falls Church, VA. The procurement is non-competitive, with no formal evaluation factors, pricing details, or line-item breakdowns provided, as the award is grounded in technical exclusivity and operational necessity. No packaging, marking, invoice submission, or payment office details are specified beyond the agency’s location, and no representations, certifications, or socioeconomic status disclosures are required from the vendor. The sole source justification hinges on the irreducible compatibility requirements of the existing infrastructure, which preclude alternative vendors and necessitate continuity in PIT tag data collection across the basin.

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → Al DLA Aviation At Huntsville

Same awarding agency

Military Packaging & Preservation ServicesThe contract requires comprehensive packaging and preservation services for defense electronic components in strict compliance with MIL-STD-2073-1 and MIL-STD-129 standards, ensuring long-term protection against environmental degradation. This includes vacuum sealing components, incorporating appropriate desiccants to control moisture, and using wood packaging materials that meet ISPM-15 international phytosanitary requirements to prevent pest spread during transit. The work is categorized as a subcontract under NAICS code 561910, with performance designated for Fort Bliss, Texas, at the 79916 zip code. The opportunity was posted on July 22, 2026, and responses must be submitted by August 21, 2026, by 9:00 PM Eastern Time. The contracting entity is the Department of Defense, specifically the DLA Aviation office based in Huntsville, though the physical work location is Fort Bliss.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

MIL-STD-130 Marking & Labeling ServicesThe contract requires the application of permanent identification markings to defense components in full compliance with MIL-STD-130 standards, specifically utilizing Unique Item Identification (UID) through direct part marking methods to ensure traceability and durability under operational conditions. All markings must meet the rigorous technical and durability requirements mandated by the Department of Defense to support asset management, logistics, and maintenance throughout the lifecycle of the equipment. Performance is required at Fort Bliss, Texas, with a response deadline of August 21, 2026, and the opportunity is structured as a subcontract under the NAICS code 332999 for Other Miscellaneous Fabricated Metal Product Manufacturing. The agency issuing the solicitation is the Defense Logistics Agency Aviation at Huntsville, operating under the broader authority of the Department of Defense. All work must adhere strictly to federal specifications without exception, and the contractor is expected to demonstrate proven capability in UID implementation, material compatibility, and documentation compliance for defense-grade components.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Calibration Services for Test & Measurement EquipmentThe contract requires the provision of calibration services for test, measurement, and diagnostic equipment utilized in production and inspection processes, with strict adherence to ANSI/NCSL Z540-3-2006 or ISO 10012:2003 standards, ensuring all calibrations maintain traceability to national measurement standards. Services must be performed with precision to support the integrity of equipment used in critical defense operations, and the contractor is expected to demonstrate proven capability in meeting these technical and quality requirements without deviation. The opportunity is designated as a subcontract under NAICS code 811212, with a response deadline of August 21, 2026, and the performance location is specified as Fort Bliss, Texas, with a ZIP code of 79916. The contracting activity is managed by the Department of Defense through the Defense Logistics Agency Aviation at Huntsville, though the specific point of contact information is not provided. The solicitation was posted on July 22, 2026, and is accessible via the SAM.gov portal for eligible subcontractors seeking to participate in the procurement process.

Computer and Office Machine Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

Engineering Change Proposal (ECP) & Deviation ManagementThe contract requires the preparation and submission of Engineering Change Proposals, Requests for Deviation, and Requests for Variance to manage design or process modifications, including comprehensive documentation, technical justification, and coordination of approvals. This work is critical to ensuring compliance with technical specifications and maintaining operational readiness through controlled change management. All submissions must adhere to established procedures and support the integrity of engineering systems under the oversight of the Department of Defense. The performance location is Fort Bliss, Texas, with a zip code of 79916, and the work falls under NAICS code 541330 for engineering services. The opportunity is classified as a subcontract with no set-aside designation, and responses are due by August 21, 2026. The solicitation is issued by the Defense Logistics Agency Aviation at Huntsville, and while no specific point of contact is provided, all activities must align with DoD standards and timelines to ensure timely review and implementation of changes.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

Lead-Free Control Plan (LFCP) Development & ComplianceThe contract requires the development and implementation of a Lead-Free Control Plan to ensure full compliance with environmental regulations and RoHS standards for defense electronics applications. This includes establishing robust processes for material traceability, validating manufacturing and assembly procedures to eliminate lead contamination, and maintaining comprehensive documentation to demonstrate adherence throughout the product lifecycle. The plan must be designed to meet the stringent requirements of defense systems, ensuring that all components and processes remain free from prohibited substances while maintaining performance and reliability. Performance of this work is centered at Fort Bliss, Texas, with a response deadline of August 21, 2026, and the contract is classified as a subcontract under NAICS code 541690. The contracting activity is managed by the Department of Defense through the DLA Aviation office at Huntsville, indicating the critical nature of this effort in supporting defense supply chain integrity. Success requires integration of quality control, supply chain oversight, and regulatory alignment to satisfy both technical and compliance obligations for use in military electronics systems.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Technical Data Package (TDP) DevelopmentThe contract requires the development and delivery of a complete Technical Data Package for defense electronic components, encompassing detailed engineering drawings, specifications, process flows, and all necessary approval documentation to ensure form, fit, function, and interchangeability with existing systems. This effort must meet exacting military standards and is intended to support sustainment, replacement, or upgrade activities within defense platforms managed by the Department of Defense. The work is being procured as a subcontract under the NAICS code 541330, indicating engineering services, and performance is obligated at Fort Bliss, Texas, with the delivery address specified as 79916. The solicitation was posted on July 22, 2026, and responses are due by August 21, 2026, at 9:00 PM Eastern Time. The contracting authority is the Defense Logistics Agency Aviation located at Huntsville, though the physical work site is Fort Bliss. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors. The contract does not include a designated point of contact in the provided data, and all submissions must be made through the official SAM.gov portal. Failure to meet the deadline or deliver a fully compliant TDP may result in rejection or contract termination.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

CABLE ASSEMBLY,SPECThe contract pertains to a cable assembly specification under solicitation number SPRRA126Q0039, with a response deadline extended to August 5th, 2026, at 9:30 PM ET. All other terms and conditions of the original agreement remain unchanged. The procurement is designated as a Total Small Business Set-Aside under FAR 19.5, NAICS code 335311, and is managed by the Department of Defense through the Office of DLA Aviation at Redstone Arsenal, Alabama. The place of performance is Huntsville, Alabama, and the primary point of contact is Rashawn Knox, with Imelda Chagolla available as a secondary contact. The opportunity is publicly posted on SAM.gov, with full details accessible via the provided link, and the solicitation was posted on July 22nd, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 21 hours ago

DEADLINE

MOTOR, IMPELLER ASSEMBLYThe U.S. Government, through the Defense Logistics Agency Aviation at Huntsville, is seeking to award a single Firm Fixed Price, five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the procurement of the Motor, Impeller Assembly, identified by NSN 6105-01-599-6729 and part number 11463449-3, for use in the M-D6 weapon system. The contract will have a minimum guaranteed quantity of 35 units and a maximum of 175 units, with the first delivery order required to include the full minimum quantity, issued at or shortly after contract award. This acquisition is restricted exclusively to LeKtron, Inc., the sole responsible source with CAGE code 0SSP0, under FAR Part 6.103-1, as no other supplier can meet the technical and qualification requirements due to the lack of available government data rights or manufacturing knowledge to support alternative sources. The item falls under NAICS code 335312 and is subject to a small business size standard of 1,250 employees. Government-first-article testing is mandatory, requiring one sample to be submitted for destination inspection and acceptance within 195 days after contract award, with a 90-day government review window. Deliveries must be made FOB destination to Redstone Arsenal, Alabama. Offerors must meet strict prequalification criteria, including submission of detailed company information such as CAGE code, technical POC, and socio-economic status. Export control restrictions apply under the Arms Export Control Act and Export Administration Act, mandating that both the offeror and any manufacturing sources hold an active United States/Canada Joint Certification Program (JCP) registration to access controlled technical data; failure to comply will disqualify proposals without opportunity for extension or waiver. Proposals must be submitted by August 6, 2026, and any offer exceeding $10 million requires certified cost and pricing data per FAR Part 15. Communications must be directed exclusively via email to the designated contract specialists, and no phone inquiries will be accepted. Foreign firms must route requests through their respective embassies.

Motor and Generator Manufacturing

POSTED

about 21 hours ago

DEADLINE

HOLDER, ELECTRICAL CThis requirement is a limited-source procurement exclusively for Woodard Electronics, Inc. and Yulista Integrated Solutions, LLC, authorized under 10 U.S.C. 3204(a)(1) and FAR 6.103-1(b), due to the restricted number of qualified sources capable of fulfilling the agency’s needs. The contract seeks one unit for First Article Testing and two units for production of the Holder, Electrical C, identified by NSN 5998-01-528-1310 and manufacturer part number 13589406, with CAGE code 18876. The item is critical to the Patriot M-D6 weapon system and requires compliance with First Article Test procedures. Technical data associated with the item is subject to export restrictions under the Arms Export Control Act. Proposals must be submitted by 4:00 PM Central Standard Time on August 21, 2026, and the solicitation is issued under SPRAA2-26-Q-0037 by the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, with performance required at Fort Bliss, Texas. All responses must be directed to the primary point of contact, Rodney Haygood.

Bare Printed Circuit Board Manufacturing

POSTED

about 21 hours ago

DEADLINE

SPRRA126Q0025 // STARTER DRIVE, ASSEM // NSN 2840-01-461-9195This solicitation is a sole-source procurement issued to Honeywell Intl, Inc. for the acquisition of seven units of the Starter Drive, Assembly, Part Number 2-160-010-21, with National Stock Number 2840-01-461-9195. The procurement is managed under solicitation number AX6T6055AX and was posted on July 17, 2026, with a response deadline of August 18, 2026, at 7:30 PM Eastern Time. The contract falls under NAICS code 336412, which classifies it within the Aircraft Engine and Engine Parts Manufacturing sector. The issuing agency is the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, operating under the Department of Defense, with Richard Bulson designated as the primary point of contact for inquiries. The place of performance is listed as an unnamed location in Arizona, and the solicitation is accessible through the SAM.gov portal for further details.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

CWS Engineering Services/Contractor Logistics Support (Sole Source to Invariant Corporation)All communication regarding this solicitation must be directed via email to Scott Alexander at scott.alexander@dla.mil, with no telephone requests accepted. Requests must include the solicitation number SPRRA2-26-R-SP01 in the subject line, along with the requester’s full name, title, telephone number, email address, company name, address, and CAGE code. This acquisition is a sole-source procurement under FAR 6.302-1(a)(1) exclusively for Invariant Corporation, CAGE code 1T4T8, due to the unavailability of competitively obtainable technical data, inability to economically source alternatives, and the inability to create adequate specifications for open competition. The contract will be placed under the existing Indefinite Delivery Requirements Type Contract SPRRA2-24-D-0010 to support the Tactical Aviation and Ground Munitions Project Office by providing personnel, support, and services for the Containerized Weapon Support, CWS-Advance Precision Kill Weapon System, and Serenity programs. Only prequalified firms that can produce the specified items may respond, and foreign entities must route all inquiries through their respective embassies. The response deadline is August 1, 2026, though the solicitation date may shift, but will not close before this date. The NAICS code is 541715, and the contracting office is located at Redstone Arsenal, Alabama, under the Department of Defense.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

PANEL,CONTROL, ELECT - RFPThe request for proposal titled PANEL,CONTROL, ELECT - RFP with solicitation number SPRRA2-26-R-0086 was posted on July 17, 2026, and responses are due by August 17, 2026, at 9:00 PM Eastern Time. This solicitation is issued by the Department of Defense through the Defense Logistics Agency Aviation office located at Redstone Arsenal, Alabama, with no set-aside provisions applied, making it open to all eligible contractors. The NAICS code 334290 designates the procurement as related to other electronic component manufacturing, indicating the requirement is for control panels or electrical components supporting aviation systems. Performance of the contract is expected to occur at Redstone Arsenal, Alabama, and all inquiries should be directed to the primary point of contact, Cheyenne Wright, at cheyenne.wright@dla.mil, with Thomas Gunter as the secondary contact. Interested parties can access further details and submit proposals through the official SAM.gov portal linked in the solicitation.

Other Communications Equipment Manufacturing

POSTED

DEADLINE