Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing and Reporting for F110 Seals

Active

Federal

Response Deadline12/02/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Cincinnati, OH, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRTA1-27-R-0012.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

F110 SEAL METALLIC AIR, NSN: 2840-01-308-7046PR, PN: 1441M38G06

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineDec 2

Submission deadline

Response Deadline

12/02/2026, 10:00:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs quality validation and testing for prime contractors on DLA Aviation F110 engine projects. Develops First Article Test Plans (FATP), executes tests on standard and expendable first articles, and generates First Article Test Reports (FATR). Coordinates CDRL submissions via Form 1423-1 and Form 260. Requires AS9100 certification and metrology equipment for four-decimal place verification. Delivers validated first articles and test reports.

Similar Contracts

Same NAICS industry code

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities, under NAICS code 541380. Bidders must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification, proof of insurance, and three professional references by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and incorporates various FAR clauses regarding small business utilization, equal opportunity, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 5 hours ago

DEADLINE

Acceptance Testing and Certification for Electric Starters

Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Sensor & Hardware Testing (Lab and Field)This subcontract involves providing comprehensive laboratory and field testing for weather sensors and data acquisition hardware in support of prime contractors for the NASA Shared Services Center. The scope of work includes executing tests for sensors and peripherals, supporting the verification and validation of integrated hardware and firmware, and providing fabrication support that meets specific quality certifications. The project is based in Orlando, Florida, and requires the delivery of detailed test reports and formal verification and validation certification documentation. Interested parties should note the solicitation timeline, with a response deadline set for October 20, 2026.

NASA Shared Services Center

POSTED

about 9 hours ago

DEADLINE

Avionics Testing and Quality Assurance ServicesThe Avionics Testing and Quality Assurance Services subcontract involves providing independent inspection, environmental testing, and qualification testing for prime contractors supporting Department of the Air Force KC-46 aircraft projects. The scope of work includes conducting functional testing, environmental stress screening, and vibration and thermal testing utilizing spectrum analyzers and environmental chambers. To ensure compliance, the provider must maintain accreditation according to MQR-PSD-1 guidelines and Source Approval Request standards. The final deliverables for this engagement consist of comprehensive test reports and necessary certification documentation. This opportunity is managed through the Department of Defense via the Ok DLA Aviation office in Oklahoma City.

Ok DLA Aviation At Oklahoma City

POSTED

about 9 hours ago

DEADLINE

Ballistic Certification and Product Compliance Testing (PCT)

DLA Weapons Support

POSTED

about 9 hours ago

DEADLINE

in about 1 year

Underground Fuel Storage Tank CalibrationThis subcontract involves the precise measurement and calibration of underground fuel storage tanks for prime contractors working on Pakistan State Oil Company Limited projects. Specifically, the selected provider will perform volumetric or geometric calibration at the PSO 95 Riyasat and Sunshine sites to develop accurate dip-to-volume charts. The process requires the use of precision electronic dip tapes and volumetric pumps to ensure that factors such as tank tilt and shell deformation are fully accounted for in the final certified calibration tables. To be eligible for this engagement, contractors must maintain active NTN and GST registrations and demonstrate a zero-fatality safety record. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026. This technical service falls under NAICS code 541380 and is managed by Pakistan State Oil Company Ltd.

Pakistan State Oil Company Ltd

POSTED

about 13 hours ago

DEADLINE

RFP RF-32061-AS (Calibration of Underground Fuel Storage Tanks at PSO 95 Riyasat and Sunshine in Lahore Division)

Solicitation # Doc341268442

Pakistan State Oil Company Limited is soliciting bids for the calibration of underground fuel storage tanks at two locations, PSO 95 Riyasat and Sunshine, within the Lahore Division. This procurement is conducted in accordance with PPRA Clause 42 b, with all bids and tender document requests required to be submitted electronically through the SAP Ariba portal. The deadline for bid submission is October 22, 2026, at 2:15 PM, with the bid opening scheduled for 2:30 PM on the same day. Eligible bidders must be active taxpayers and provide valid NTN and GST/PST certificates, along with the CNIC of the owner or authorized representative. To be considered, vendors must demonstrate adequate financial capabilities and relevant past experience, certify that they have not been blacklisted by any public or private entity, and confirm they have not been involved in any fatal accidents during project execution within the last two years. Requests for tender documents must include a signed and stamped request on the bidder's official letterhead. Conditional or partial proposals will be rejected.

Pakistan State Oil Company Ltd

POSTED

about 13 hours ago

DEADLINE

Solicitation # CUP 22-001

The French Hotel Project (CUP 22-001) involves the rehabilitation and development of a 70-room boutique luxury hotel on a 1.68-acre site located at 31861-31871 Camino Capistrano in San Juan Capistrano, California. The project consists of six buildings featuring a restaurant, event spaces, a fitness center, a pool area, a public gathering space, and on-site valet parking. A central component of the development is the restoration and rehabilitation of the Domingo Yorba and Casa Manuel Garcia Adobes, both of which are listed on the National Register of Historic Places, to be integrated as guest rooms and dining areas. The scope includes the demolition of existing barns and structural additions to the adobes, with materials intended for salvage and reuse. The project is subject to extensive environmental review under the California Environmental Quality Act (CEQA), with a Draft Environmental Impact Report identifying significant and unavoidable impacts related to transportation and vehicle miles traveled. Other technical assessments have addressed air quality, noise, biological resources, and geotechnical stability, including a Water Quality Management Plan to comply with NPDES Stormwater Program requirements. Construction is anticipated to last approximately 12 months, with demolition and site preparation scheduled for early 2026 and operations expected to begin in 2027. Key compliance requirements include ADA-accessible parking with EV charging, adherence to the California Noise Control Act, and the procurement of Caltrans encroachment permits for work within the right-of-way.

City of San Juan Capistrano

POSTED

about 14 hours ago

DEADLINE

First Article and Production Lot Testing ServicesThis subcontract opportunity is for the provision of First Article Testing and Production Lot Testing services to support prime contractors on DLA Weapons Support ASC projects. The selected provider will be responsible for conducting both destructive and non-destructive validation and verification testing within accredited laboratory facilities. Key requirements include the preparation of reports according to DI-NDTI-80809B and close coordination with DCMA QAR for witnessed testing events. Final deliverables consist of FAT and PLT reports, along with DD Form 1222 and DD Form 250. The project is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance located in Cherry Point. This is a total small business set-aside under NAICS code 541380. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Production Lot Testing and Quality Assurance ServicesThis subcontract for Production Lot Testing and Quality Assurance Services supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform independent quality testing and validation for prime contractors, specifically executing Production Lot Tests using sampling plans aligned with MIL-STD-1916 or ASQ H1331. Key responsibilities include utilizing metrology and inspection equipment to verify material properties and TDP dimensions, with final deliverables consisting of lot acceptance certifications and detailed test reports. The project is based in Cherry Point, North Carolina, and falls under NAICS code 541380. To be eligible, contractors must maintain ISO 9001:2015 certification and meet CMMC Level 2 security requirements. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Critical Item Source Inspection and CertificationThe Critical Item Source Inspection and Certification subcontract involves providing independent quality assurance and source inspection services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on verifying dimensional conformance of threads according to FED-STD-H28/20 and executing sampling plans based on MIL-STD-1916 or ASQ H1331. Additionally, the contractor is responsible for using precision gauging and measurement tools to ensure marking compliance with MIL-STD-129 and MIL-STD-130N, ultimately delivering detailed inspection reports and certificates of conformance. This project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026. The contract is managed by the Department of Defense through the DLA Weapons Support ASC.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) & ValidationThis subcontract involves performing First Article Testing and validation for the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the contractor to conduct in-process verification and final inspections on three units of NSN 4710-01-579-9880, utilizing precision metrology equipment to ensure all Technical Data Package tolerances are met. A formal First Article Test Report must be delivered within 20 calendar days of completion. To be eligible, the contractor must maintain ISO 9001:2015 certification and hold necessary ITAR and EAR authorizations. The opportunity was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Aerospace Electronic Component SupplierThis subcontract opportunity with the Department of Defense, managed by the Oklahoma City DLA Aviation office, seeks a supplier for raw electronic components, circuit boards, and specialized semiconductors to support Department of the Air Force KC-46 aircraft projects. The selected provider will be responsible for sourcing long-lead time parts, delivering component kits or individual items, and providing necessary certificates of conformance. A critical aspect of the role involves mitigating Diminishing Manufacturing Sources and Material Shortages by identifying qualified alternative components. To ensure quality and compliance, the contractor must maintain AS9100 or ISO 9001 certification and guarantee full traceability for all parts supplied. Interested parties must respond by October 24, 2026, under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

KC-46 Special Purpose Computer ManufacturerThis subcontract, managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, involves the manufacture of five Special Purpose Computers (P/N 3R2201B) for prime contractors supporting Department of the Air Force KC-46 aircraft projects. The scope of work includes the integration of component parts, final assembly, and the execution of aerospace-grade testing. To ensure compliance and quality, the contractor must utilize specialized testing rigs for KC-46 avionics and complete a Source Approval Request package in accordance with MQR-PSD-1. The final deliverables consist of five fully manufactured, tested, and certified computers. The response deadline for this opportunity is October 24, 2026.

Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Aerospace-Grade Inconel 718

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 9 hours ago

DEADLINE

in about 2 months

Fabrication of F110 Metallic Air Seals (Inconel 718)

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 2 months

New Manufacture Material, NSN 2840016760196PR (AMC 3R)

Solicitation # SPRTA1-27-R-0062

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 2 months

New Manufacture Material, NSN 2995010074738OK (AMC 4B)

Solicitation # SPRTA1-27-R-0073

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 2 months

COMPUTER,SPECIAL PU_End_Item_KC-46_NSN_1680016548736KT _PN_3R2201B

Solicitation # FD20302700279

The Department of the Air Force, specifically the 424th Supply Chain Management Squadron at Tinker AFB, is conducting market research through a Sources Sought Synopsis to identify potential sources for the procurement of special purpose computers for the KC-46 platform. The requirement involves the new manufacture of five units of part number 3R2201B (NSN 1680-01-654-8736KT). This effort is not a formal solicitation, and no funds are currently available; the government is using this process to determine the best acquisition strategy and evaluate if the requirement can be a small business set-aside. Qualified sources must be capable of providing all labor, materials, facilities, and equipment for the manufacture, inspection, testing, packaging, and shipping of the items. They may also be responsible for supply chain management, logistics planning, and addressing diminishing manufacturing sources and material shortages. Interested businesses under NAICS code 336413, including various small business designations and large businesses, must provide detailed company information and ownership status. Additionally, potential sources are required to complete a Source Approval Request package and submit it electronically via DoD SAFE to be considered qualified.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

F110 SEAL METALLIC AIR, NSN: 2840-01-308-7046PR, PN: 1441M38G06

Solicitation # SPRTA1-27-R-0012

Solicitation SPRTA1-27-R-0012 is a sole source acquisition issued by the Department of Defense, specifically the DLA Aviation office at Tinker AFB, Oklahoma. The contract is for the procurement of F110 Seal Metallic Air components, identified by NSN 2840-01-308-7046PR and Part Number 1441M38G06. The primary requirement consists of a minimum of 9 units, with a range between 3 and 17 units, scheduled for delivery to Tinker AFB by July 27, 2027, though early delivery is acceptable. General Electric Company, Inc. (CAGE 07482) is listed as the qualified source. The scope of work includes the delivery of the hardware along with critical first article requirements, specifically two first articles, one expendable first article, a first article test plan, and a first article test report. Technical specifications for the seal include dimensions of 24.1550 inches in length, 1.5600 inches in width, and 15.6000 inches in height. The procurement is subject to IUID and export control requirements, and qualification requirements are in place. Award decisions will be based on a combination of price, which is a significant factor, and past performance. The solicitation was posted on October 16, 2026, with a response deadline of December 2, 2026. Interested parties may submit capability statements or proposals via SAM.gov. Primary coordination is handled by buyer John Nolan, and an ombudsman is available at 385-591-1672 to address contractor concerns during the proposal phase.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 2 months

Hazardous Materials Packaging and Marking ServicesThis subcontract for Hazardous Materials Packaging and Marking Services supports prime contractors on DLA Aviation projects managed by the Department of Defense in Oklahoma City. The scope of work involves providing specialized packaging and performing packing and marking for units containing residual fuel. To ensure safety and regulatory compliance, the contractor must utilize leak-proof liners and absorbent materials according to SPI FW-117-2012 and apply all markings in accordance with MIL-STD-129, MIL-STD-2073-1, and DAFI 24-602 VOL2. The contractor is required to deliver certified shipping containers and maintain strict adherence to MIL-STD-130. A critical qualification for this role is the possession of a Dangerous Goods Certification specifically for UN3363 Class 9 materials. This opportunity falls under NAICS code 488410, with a response deadline set for November 16, 2026.

Motor Vehicle Towing

POSTED

DEADLINE

in about 1 month

Aerospace Surface Treatment and PlatingThis subcontract for Aerospace Surface Treatment and Plating supports DLA Aviation at Oklahoma City under the Department of Defense. The selected provider will perform specialized surface treatments, plating, and coating for prime contractors to ensure corrosion resistance for fuel control components. Work involves applying aerospace-approved coatings using chemical plating baths and anodizing equipment in strict accordance with technical drawings for Critical Safety Items. To qualify for this engagement, contractors must hold ISO 9001:2000 and NADCAP accreditations. The primary deliverable is the provision of plated and coated components meeting all specified aerospace standards. Interested parties must respond by November 16, 2026, regarding this opportunity categorized under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

in about 1 month

Supply of Certified Aerospace-Grade Raw MaterialsThis subcontract involves the supply of certified aerospace-grade raw metals and alloys to prime contractors supporting DLA Aviation projects for the manufacture of Fuel Control units. The provider is responsible for sourcing and testing materials in strict accordance with Engineering Drawing 441610, ensuring all delivered stock meets rigorous quality standards. Key requirements include full material traceability and the provision of Mill Test Reports to verify compliance. Additionally, the supplier must adhere to the Buy American Act and the Balance of Payments Program. This effort is managed under the Department of Defense for the DLA Aviation office in Oklahoma City.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS