Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing and Reporting Services

Active

Federal

Response Deadline10/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing and Reporting Services, issued by the Department of Defense through DLA Aviation at Huntsville, requires the performance of First Article Testing for prime contractors. The scope of work involves validating the structural integrity, optical clarity, and dimensional accuracy of aircraft canopies using specialized equipment. The selected provider must generate and electronically submit a formal Contractor First Article Test Report to the designated DLA email address in accordance with DoD standards. This opportunity is categorized under NAICS code 541380 and is to be performed in Grand Prairie, Texas, with a response deadline of October 2, 2026.

General Info

DOD subcontract for aircraft canopy first article testing and reporting in Grand Prairie, Texas.

Agency

Department Of Defense → Al DLA Aviation At HuntsvilleView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Grand Prairie, TX, 75050, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRRA2-26-R-0080.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Canopy Fixed

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 4

subcontract

Response DeadlineOct 2

Submission deadline

Response Deadline

10/02/2026, 05:00:00 PM UTCin 24 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Al DLA Aviation At Huntsville

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors delivering DLA supply contracts. Validates aircraft canopy structural integrity, optical clarity, and dimensional accuracy using specialized testing equipment. Generates and electronically submits a formal Contractor First Article Test Report to WARDTEAM@DLA.MIL per DoD standards. Delivers the completed FAT Report.

Similar Contracts

Same NAICS industry code

Non-Project Specific Request For Qualifications UCLA Health Materials Testing And Deputy Inspection Projects

Solicitation # 20260908033

UCLA Health is seeking qualified consultants under solicitation 20260908033 to provide non-project specific materials testing and deputy inspection services. The scope of work covers a wide range of activities, including general and specialized deputy inspections, waterproofing inspections, and destructive or exploratory testing for renovations, infrastructure upgrades, and seismic improvements. Selected consultants will be responsible for the repair or replacement of any building components affected by destructive testing. The contract will be structured as a Professional Services Agreement with an initial term of up to three years, with the possibility of a three-year extension. Services will be performed across various UCLA Health campuses, including Westwood, Santa Monica, West Valley, and the Resnick Mental Health Campus. Interested parties must submit their qualifications by the deadline of September 18, 2026.

POSTED

about 5 hours ago

DEADLINE

Water Quality Analysis and Compliance Testing

250-NETWORK Contract Office 10 (36C250)

POSTED

about 8 hours ago

DEADLINE

Independent Testing and Dimensional Inspection Services

Nswc Indian Head Division

POSTED

about 8 hours ago

DEADLINE

WATER TESTING AT GETTYSBURG NATIONAL MILITARY PARK

Solicitation # 140P4226Q0053

The Department of the Interior, through Ner Services Mabo, is soliciting bids for water testing services at Gettysburg National Military Park in Gettysburg, Pennsylvania. This opportunity is designated as a total set-aside for small businesses under NAICS code 541380. Interested parties must submit their responses by September 21, 2026, at 4:00 PM. The primary point of contact for this solicitation is Deborah Coles, and the administrative office is located in Boston, Massachusetts.

Ner Services Mabo (43000)

POSTED

about 8 hours ago

DEADLINE

IDENTIFY Study Participants – 5-Base Sample Preparation and Whole Genome Multiomic Profiling

Solicitation # 75N98026Q01158

The National Institutes of Health, specifically the Prenatal Genomics and Therapy Section within the National Human Genome Research Institute, is seeking 5-base whole genome sequencing services for plasma-derived cell-free DNA samples from the IDENTIFY study. The project requires 5Base sample preparation and multiomic profiling at 30x coverage to generate high-resolution genomic and epigenomic data from women whose prenatal sequencing suggested maternal malignancy. The primary goal of this acquisition is to produce high-quality data to support computational models for determining the tissue source of incidentally detected maternal cancers. This effort aims to improve the interpretation of prenatal sequencing results, enhance early cancer detection during pregnancy, and advance the broader understanding of circulating cell-free DNA biology. The solicitation is identified as 75N98026Q01158 with a response deadline of September 15, 2026.

National Institutes Of Health

POSTED

about 8 hours ago

DEADLINE

Notice of Intent to Award Sole Source

Solicitation # 1175267

The USDA-ARS is seeking laboratory nutritional analysis services under solicitation 1175267 to support two specific research projects focused on insect nutrition and honey nutrient profiling. The required services involve providing quantitative data on amino acids, fatty acids, vitamins, minerals, sugars, and proximate composition for mono-floral honey samples from Hawaii and enhanced Mediterranean fruit fly diet and insect samples. This data will be utilized to evaluate nutritional quality and support research regarding endangered bird nutrition, insect rearing, and the characterization of Hawaii honeys. This opportunity is listed as a Notice of Intent to Award Sole Source with a response deadline of September 11, 2026. The contract falls under NAICS code 541380 and is managed by the Department of Agriculture, specifically the Csa East 6 Usda-Fs office located in Atlanta, Georgia, with the place of performance situated in Hilo, Hawaii.

Csa East 6 Usda-Fs

POSTED

about 8 hours ago

DEADLINE

New Car Assessment Program (NCAP) Pedestrian Impact Testing

Solicitation # 693JJ926R000073

The National Highway Traffic Safety Administration (NHTSA) is seeking multiple awardees under an indefinite-delivery, indefinite-quantity (IDIQ) contract to perform pedestrian protection impact testing on production motor vehicles. The scope of work includes test-procedure evaluation, impactor qualification, and the execution of headform, Flexible Pedestrian Legform Impactor (Flex-PLI), and upper-legform tests in accordance with US and European NCAP Crashworthiness Pedestrian Protection Test Procedures. Additionally, the contract covers optional cyclist and aPLI testing, as well as active hood sensing tests. Deliverables include detailed NCAP test reports, vehicle condition reports, and quality control packages, with specific timelines for data submission and reporting. Award will be made on a best-value tradeoff basis, where technical factors are deemed more important than price. The evaluation focuses on four equal technical factors: the technical and quality assurance management plan, facilities and equipment, organization and personnel qualifications, and past performance. The contract utilizes firm-fixed-price and cost-reimbursement task orders. Contractors must adhere to strict calibration and qualification standards for test devices and maintain compliance with federal security and privacy protections. Invoicing is processed electronically through the Delphi web-portal, with payments typically issued 30 days after the receipt of a proper voucher.

693JJ9 Nhtsa Office Of Acquistion

POSTED

about 8 hours ago

DEADLINE

Aeration Blower and Silencer Vibration and Shock Fixture Fabrication

Solicitation # N6660426Q0459

Solicitation N66604-26-Q-0459 is a firm-fixed-price request for quotes from the Naval Undersea Warfare Center Division, Newport, for the fabrication and assembly of two specific test fixtures: one CHT Aeration Blower Fixture Assembly and one Discharge Silencer Fixture Assembly. The contractor is responsible for procuring materials, including copper-nickel piping, and performing welding and assembly to replicate a shipboard environment in accordance with Mil-DTL-901E and Mil-Std-167A. The work will be performed at the contractor's facility and at NUWCDIVNPT, where the contractor must provide on-site technical personnel to support government-executed fitment evaluations. Key deliverables include a Fabrication and Inspection Report due within five business days of assembly completion and a final Summary Report detailing fabrication and fitment testing. The desired delivery date for the assemblies is January 15, 2027, with delivery terms set as FOB Destination, Newport, RI. Award is based on the lowest price technically acceptable, with the government reviewing past performance via the Supplier Performance Risk System. Offerors must be registered in SAM, provide a CAGE code for drawing access, and achieve CMMC Level 2 (Self) certification prior to award. Quotes are due by September 11, 2026, and must include all shipping costs within the unit price.

Nuwc Division Newport

POSTED

about 8 hours ago

DEADLINE

(Sole Source) Bode Technology IQAS FB (MA)

Solicitation # SRC0000036068

This sole source master agreement, identified as solicitation SRC0000036068, is established for Bode Technology to provide IQAS FB services to the Alabama Department of Forensic Sciences. The contract is specifically designated for the Mobile Lab 1 facility located in Mobile, Alabama, and remains effective through September 30, 2027. The procurement process requires bid pricing for the specified item lines, with the agency emphasizing that the final award and subsequent purchase orders must remain within the established budget. The solicitation was posted on September 8, 2026, with a response deadline of September 11, 2026, and lists Carla Williams as the primary point of contact.

POSTED

about 18 hours ago

DEADLINE

STE108 SPS Testing

Solicitation # 36C25026Q0904

Solicitation 36C25026Q0904 is a request for quotes for water testing services at the Louis Stokes VA Medical Center and the VA Outpatient Surgery Center in Cleveland, Ohio. This 100 percent small business set-aside is a firm-fixed-price purchase order consisting of a base year starting September 7, 2026, with two potential option years. The scope of work requires the contractor to provide all labor, materials, and equipment to collect and process water samples from the Sterile Processing Service, GI Scope Reprocessing Area, and OSC Scope reprocessing area. Testing must comply with AAMI ST108 and VHA Directive 1116, covering critical and AER water monthly, utility and domestic water quarterly, steam testing quarterly, and dental line testing quarterly. The contractor is also required to provide a handheld resistivity meter, perform monthly calibrations, and deliver a site-specific operation manual and training for staff. Award will be based on the most advantageous offer, considering technical capability, past performance, and price. Submissions must include the offeror's SAM UEI number and a completed price schedule. All written reports must be submitted within five business days of analysis. The deadline for submission is September 10, 2026, at 5:00 pm EST, and all communications should be directed to the contract specialist, Jennifer Nowak.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

B--MICROPLASTICS ANALYSIS SAMPLING BASE

Solicitation # 140G0126Q0283

The Department of the Interior, through the Office of Acquisition Grants, is seeking sources for a contract titled Microplastics Analysis Sampling Base. This opportunity is categorized as a sources-sought notice under NAICS code 541380 and is designated as a total small business set aside. The solicitation, numbered 140G0126Q0283, was posted on September 7, 2026, with a response deadline of September 12, 2026. The contracting office is located in Sacramento, California, and the primary point of contact for this requirement is Joel Berberena.

Office Of Acquisiton Grants

POSTED

DEADLINE

Testing & InspectionsThis subcontract opportunity, titled Testing and Inspections, is issued by Filanc for quality control services on Fallbrook Public Utility District projects. The selected contractor will be responsible for conducting material testing, pressure testing, and compliance inspections of installed pipelines, as well as delivering the necessary inspection reports and installation certifications to prime contractors. The solicitation was posted on September 6, 2026, with a response deadline of September 29, 2026. This opportunity is designated for various small business set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, and Veteran-Owned Small Business certifications, falling under NAICS code 541380.

POSTED

DEADLINE

More opportunities from Department Of Defense → Al DLA Aviation At Huntsville

Same awarding agency

Logistics and Production Forecasting Services

Process, Physical Distribution, and Logistics Consulting Services

POSTED

about 8 hours ago

DEADLINE

Supply of Specialized Electrical Components for Patriot Cable Assemblies

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

Manufacture of Branched Electrical Cable Assemblies (NSN 6150-01-669-6430)

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL BRANCHED-W102

Solicitation # PANRSA-26-P-0000040922

The Department of Defense, through DLA Aviation at Huntsville, is conducting market research via a Sources Sought Notice for the manufacture of the Cable Assembly Special Purpose, Electrical Branched-W102 (NSN 6150-01-669-6430, Part Number 13661634) for the M-D6 Patriot Weapon System. This effort, identified by solicitation number PANRSA-26-P-0000040922 under NAICS 335311, seeks to identify capable offerors for the production, inspection, testing, and packaging of these assemblies. The scope includes comprehensive supply chain management, addressing diminishing manufacturing sources, and ensuring ultra-precision quality control. Performance is centered at Redstone Arsenal, Alabama, with the government retaining final acceptance authority. Due to the sensitive nature of the Patriot Weapon System, this procurement is subject to strict export controls under the Arms Export Control Act and the Export Administration Act. All potential sources must possess an active United States/Canada Joint Certification Program (JCP) certification to access controlled technical data. While the government is currently evaluating the acquisition strategy—including potential small business set-asides or sole-source procurement under FAR 6.302-1(a)(1)—it is specifically encouraging responses from 8(a), HUBZone, and service-disabled veteran-owned small businesses. Responses are voluntary and intended for planning purposes only, with a deadline of September 23, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 8 hours ago

DEADLINE

AC Motor Supplier (Patriot Weapon System)

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Supply of Fixed Canopy Units (NSN 1560-01-309-8314)This subcontract involves the supply of Fixed Canopy Units under NSN 1560-01-309-8314 for prime contractors supporting DLA Aviation at Huntsville. The contractor is responsible for manufacturing or sourcing components based on Manufacturer CAGE 12849 and Part Number 5101580-2, utilizing high-grade polycarbonate or acrylic materials to meet original technical specifications. All deliverables must adhere to MIL-STD-129 standards for marking and packaging. The performance of this contract is centered in Grand Prairie, Texas, with a response deadline of October 2, 2026. The work falls under NAICS code 336413 and is managed by the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPRRA2-26-R-0080

Solicitation SPRRA2-26-R-0080 is a formal request from the Defense Logistics Agency Aviation for a five-year, Firm Fixed Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract to procure Canopy Fixed units (NSN 1560-01-309-8314, Part Number 5101580-2) for the M-DP Avenger weapon system. The contract is restricted to Texstars LLC (doing business as PPG Aerospace) as the only responsible source under FAR Part 6.103-1. The procurement includes a minimum guaranteed quantity of 137 units, with a maximum ceiling of 500 units. Following three amendments, the final closing date for proposals is October 2, 2026, at 12:00 PM CDT. Key technical requirements include mandatory Contractor First Article Testing of one unit, with the test report due within 405 days after receipt of order. Production lead time is 780 days after contract award. The acquisition is subject to strict export controls, requiring an active Joint Certification Program profile for the offeror and manufacturer. Evaluation will be based on technical acceptability and pricing reasonableness, with certified cost and pricing data required for proposals exceeding 2.5 million dollars. Deliveries are designated FOB Origin, with the final shipping destination located in Chambersburg, Pennsylvania.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

SPRRA1-26-Q-A009

Solicitation # SPRRA1-26-Q-A009

The Defense Logistics Agency is conducting market research through a Sources Sought Synopsis to identify qualified manufacturers for shipping and storage components, specifically part number 114E5918-8, to support the CH-47 Chinook weapon system. This effort falls under NAICS code 322211 and is currently managed under limited source procurement because the government does not own the necessary data rights and reverse engineering is deemed uneconomical. The agency is seeking to determine if future requirements can be competed or set aside for small businesses, including 8(a), Hubzone, and service-disabled veteran-owned concerns. Interested contractors must be capable of managing the entire production process, including supply chain management, logistics, and obsolescence issues. They are also responsible for all recurring and nonrecurring engineering costs associated with becoming a qualified source. This announcement is for informational purposes only and does not constitute a formal solicitation or a promise of a future contract. Potential sources are encouraged to seek approval through the AvMC public website to be eligible for future opportunities.

Corrugated and Solid Fiber Box Manufacturing

POSTED

DEADLINE

SPRRA1-27-Q-A001

Solicitation # SPRRA1-27-Q-A001

The Defense Logistics Agency is conducting market research through a Sources Sought Synopsis to identify qualified manufacturers and suppliers for a transmission pump, part number 145DS211-2, used in the Chinook weapon system. This effort, categorized under NAICS code 336413, aims to determine if future acquisitions can be competitive or set aside for small businesses. Because the government does not own the technical data and reverse engineering is deemed uneconomical, the acquisition is currently limited to a small number of responsible sources under FAR 6.302-1(a)(1). Interested firms, including various small business designations, must meet prequalification requirements and are encouraged to seek source approval via the AvMC public website. Selected contractors will be responsible for all recurring and nonrecurring engineering services, supply chain management, material forecasting, and the mitigation of obsolescence issues. This announcement is for informational and planning purposes only and does not constitute a formal solicitation or a commitment to award a contract.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

MOTOR ALTERNATING, CURRENT

Solicitation # SPRRA226R0096

Solicitation SPRRA226R0096 is a firm-fixed-price supply contract issued by the Defense Logistics Agency Aviation at Huntsville for the procurement of alternating current motors supporting the Patriot weapon system and M-D6 system. This requirement is a 100 percent small business set-aside under NAICS code 335312. The government will utilize the Lowest Priced Technically Acceptable evaluation procedure, awarding the contract to the offeror that provides a technically acceptable proposal with the lowest overall price. Key deliverables include a first article unit for government testing at Fort Bliss, Texas, and subsequent production quantities to be delivered to Redstone Arsenal, Alabama. Both the first article and production units are scheduled for delivery within 390 calendar days of the contract award. The contractor must adhere to strict quality standards, including ANSI/ISO/ASQ 9001:2015 or AS 9100, and comply with MIL-STD-129 and MIL-STD-130 for marking and identification. Packaging must meet MIL-STD-2073-1 Appendix J codes and ISPM-15 wood packaging compliance. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and the necessity for an active United States/Canada Joint Certification Program certification to access export-controlled technical data. Proposals must be submitted by October 5, 2026, preferably in PDF format via email or the DOD safe site.

Motor and Generator Manufacturing

POSTED

DEADLINE

Light Assembly Panel Manufacturer/Supplier

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL PURPOSE

Solicitation # RFQ-040933

The Department of Defense, specifically DLA Aviation At Huntsville, is seeking a special purpose cable assembly under solicitation RFQ-040933. This requirement falls under NAICS code 335311 and is managed by the office located in Redstone Arsenal, Alabama. Interested parties must submit their responses by October 5, 2026, at 4:00 PM. Primary coordination for this procurement is handled by Harrison Mayfield, with Michael Romine serving as the secondary point of contact.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS