Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing and Validation for Metal Tube Assemblies

Active

Federal

Response Deadline09/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing technical testing and validation services for prime contractors supporting the Department of Defense Fluid Handling Division. The primary objective is the execution of Contractor First Article Testing for metal tube assemblies to verify that 0.50 inch nominal OD dimensions and corrosion-resistant material properties align with part number 12304800 and CAGE code 19207. The work requires the use of specialized metrology and material analysis equipment and must be performed by certified quality inspectors. The final deliverables for this project include a validated prototype and a comprehensive First Article Test Report. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380.

General Info

Technical testing and validation of metal tube assemblies for DoD fluid handling services.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-407A.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE ASSEMBLY, METAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 13

subcontract

Response DeadlineSep 24

Submission deadline

Response Deadline

09/24/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical testing and validation for prime contractors on DLA Land and Maritime, Fluid Handling Division projects. Executes Contractor First Article Testing (FAT) to verify 0.50 in. nominal OD dimensions and corrosion-resistant material properties against P/N (12304800) and CAGE (19207). Uses metrology and material analysis equipment. Requires certified quality inspectors. Delivers First Article Test Report and validated prototype.

Similar Contracts

Same NAICS industry code

Shock Extension Testing (MIL-S-901)This subcontract opportunity, managed by the Department of Defense under the LSO Combat Vehicles and Armament agency, involves performing specialized shock extension testing for prime contractors on DLA supply contracts. The selected provider will conduct testing on cylinder assemblies in accordance with MIL-S-901 standards using qualified laboratory facilities, with all results reported in the DI-ENVR-80706 format. The final deliverable for this effort is a completed Shock Extension Report. The project is categorized under NAICS code 541380 and is designated as a Total Small Business Set-Aside. Performance will take place in Texarkana, Texas. Interested parties must respond by September 24, 2026, following the posting date of September 13, 2026.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

First Article Testing and Reporting for NSN 2520-01-671-3356This subcontract under the Department of Defense Land Supply Chain involves specialized first article testing and reporting for two units of NSN 2520-01-671-3356. The contractor is responsible for utilizing laboratory equipment to validate manufacturing specifications according to government protocols, documenting all results and deviations to ensure First Article Approval standards are met. The final deliverable for this project is a formal First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 24, 2026, following the posting date of September 13, 2026.

LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract involves performing First Article Testing and quality validation for the Department of Defense Fluid Handling Division. The scope of work requires the testing of one unit of item 4720/15537158 using pressure testing and leak detection systems to validate manufacturing processes. The contractor is responsible for delivering a validated first-article unit along with a comprehensive FAT Test Report. Operational requirements include close coordination with the Contracting Officer and QAR, with a mandatory notification provided 14 days before shipment. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties must respond by September 24, 2026.

FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

First Article Test (FAT) Specialist / Quality LabThis subcontract opportunity with the Department of Defense Electrical Devices Division involves providing First Article Testing services for prime contractors fulfilling DLA supply contracts. The selected specialist will be responsible for verifying the dimensional accuracy and functional performance of initial production units against Drawing 81361 13-12-37, utilizing specialized metrology equipment and electrical testing tools. The final deliverables include a comprehensive FAT Report and a validated first article sample. The project is based in New Cumberland, Pennsylvania, and requires the service provider to maintain ISO 9001 or AS9100 quality management system certifications. Interested parties must respond by September 24, 2026, under NAICS code 541380.

ELECTRICAL DEVICES DIV

POSTED

about 6 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract opportunity for First Article Test (FAT) Services supports prime contractors delivering DLA Land and Maritime supply contracts. The selected provider will be responsible for producing first-article samples and conducting rigorous testing and inspection to ensure full compliance with the DLA Master List of Technical and Quality Requirements. These activities will be performed using quality inspection labs and precision measurement tools, culminating in the delivery of an approved first-article sample and a comprehensive FAT Report. The project is managed by the Department of Defense under the Land Supply Chain agency and is designated as a HUBZone set-aside with NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by September 24, 2026, following the posting date of September 13, 2026.

LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

First Article Testing (FAT) & InspectionThis subcontract for the Department of Defense under Land Supplier Opns Vehicle Spt involves the independent testing and validation of first production units for prime contractors. The selected provider will conduct First Article Tests in accordance with FAR 52.209-3, focusing on material verification, dimensional inspection, and ensuring compliance with MIL-STD-129 marking requirements. These tasks will be executed using precision measurement tools and Coordinate Measuring Machines to ensure all specifications are met. The primary deliverables for this engagement are the First Article Test Report and the Certification of Compliance. The work is slated for performance in New Cumberland, Pennsylvania, under NAICS code 541380. Interested parties must respond by September 24, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

Production Lot Testing (PLT) for Critical ShimsThis subcontract for Production Lot Testing of Critical Shims supports prime contractors under the Department of Defense for ASC Supplier Oper AE and AF Div projects. The primary objective is to perform quality assurance and production lot testing to verify that dimensions, material properties, and tolerances align with Technical Data Package standards. This process involves the use of specialized metrology equipment and material testing laboratories to ensure all requirements are met. The contractor is responsible for delivering formal Production Lot Test Approval and Certification reports. The work is performed in San Diego, California, under NAICS code 541380. Interested parties must respond by September 21, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

First Article Test (FAT) and Quality ValidationThis subcontract involves performing First Article Testing and quality validation for prime contractors on DLA supply contracts to ensure manufacturing processes are properly validated. The scope of work includes conducting sampling, dimensional inspection, and material verification using specialized tools such as CMM, calipers, and micrometers, all in accordance with the DLA Master List of Technical and Quality Requirements. The final deliverables consist of a comprehensive FAT Report and an approved first-article sample. The opportunity is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with the place of performance located in Tracy, California. Classified under NAICS code 541380, the solicitation was posted on September 13, 2026, with a response deadline of September 21, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense Active Devices Division as a total small business set-aside under NAICS code 541380. The contractor is responsible for executing production lot testing for prime contractors specifically for NSN 5935-01-522-0872, utilizing specialized laboratory equipment to meet all technical data requirements. Performance will take place in New Cumberland, Pennsylvania. Key obligations include performing destination inspections in accordance with FAR 52.246-2 and maintaining strict adherence to NIST SP 800-171 standards for the protection of covered defense information. The final deliverables for this engagement consist of detailed test reports and a formal certification of compliance for each production lot.

ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

First Article Test (FAT) ExecutionThis subcontract involves the execution of First Article Testing for the Department of Defense under the Land Supplier Opns Engines project. The contractor is responsible for producing a first article unit separate from the standard production quantity and performing rigorous testing protocols governed by FAR 52.209-3 or 52.209-4. Using precision measurement equipment, the contractor must verify the technical specifications of NSN 3020002256963 and deliver both the validated unit and a comprehensive test report. The project falls under NAICS code 541380 and is scheduled for performance in Tracy, California. Interested parties must respond by September 24, 2026, following the posting date of September 13, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

about 6 hours ago

DEADLINE

First Article Testing and Validation Services

ELECTRICAL DEVICES DIV

POSTED

about 6 hours ago

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract opportunity with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, focuses on First Article Testing and Quality Validation. The selected provider will be responsible for the testing, validation, and certification of the first production unit for prime contractors fulfilling DLA supply contracts. This process involves conducting pre-delivery testing and preparing the necessary documentation for the Government First Article Test to ensure all Critical Application Item standards are strictly met using specialized testing rigs and measurement tools aligned with the technical data package. The final deliverables for this engagement include a certified First Article unit and a comprehensive test report. This is a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must respond by September 21, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Supplier of Hose Assembly Parts Kits (NSN 4720-01-714-6016)This subcontract involves the supply of two specialized hose assembly parts kits for the Department of Defense Fluid Handling Division. The provided kits must strictly adhere to the specifications of NSN 4720-01-714-6016 and comply with government packaging standards and FAR 52.223-3 regarding hazardous material identification. The contract is categorized under NAICS code 326220 and specifies delivery via FOB Origin to Jacksonville. Interested parties must submit their responses by September 24, 2026, following the solicitation posted on September 13, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Nonmetallic Hose Manufacturer/SupplierThis subcontract involves the manufacture and supply of nonmetallic hoses, specifically those identified by NSN 4720016421024, for prime contractors supporting the Department of Defense Fluid Handling Division. The supplier is responsible for delivering the products FOB Origin to Lewis McChord, ensuring all items meet DLA Packaging Requirements RP001 and adhere to FAR 52.204-24 and DFARS 252.204-7016 standards. The opportunity is categorized under NAICS code 339999 and requires full disclosure regarding the use of non-domestic materials. Interested parties must submit their responses by September 24, 2026, to be considered for this procurement effort.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

Polyethylene Nonmetallic Hose SupplierThis subcontract with the Department of Defense Fluid Handling Division involves the supply of 60 units of 23-inch polyethylene nonmetallic hoses. The supplier is responsible for manufacturing or sourcing materials that meet ASTM D4976 standards and utilize the specific material identified by NSN 4720012653237. All deliverables must adhere to MIL-STD-129 marking requirements and RP001 DLA packaging standards for palletization. The work is categorized under NAICS code 339999 and will be performed in Tracy, California. The solicitation was posted on September 13, 2026, with a response deadline of September 24, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Marine Scuttles (NSN 2040-01-423-7013)This subcontract involves the supply of marine scuttles for prime contractors under the Department of Defense Fluid Handling Division. The contractor is responsible for manufacturing or sourcing hardware according to NSN 2040-01-423-7013 using marine-grade materials. All deliverables must adhere to specific military standards, including MIL-STD-2073-1E for packaging, RP001 for palletization, and MIL-STD-129 for marking. The contract is categorized under NAICS code 332999 and specifies that delivery of the physical goods will be handled as FOB Origin. Performance of the contract is centered in Bremerton, Washington. Interested parties must respond by September 24, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of O-Rings (NSN 5331004985755)This subcontract involves the supply of commercial O-rings (NSN 5331004985755) for prime contractors delivering to the Department of Defense Fluid Handling Division. The manufacturer must produce items according to current Military Part Standards or consensus non-government standards, ensuring all products are delivered FOB Origin with a non-extendable shelf life of 240 months. Items must be packaged in quantities of 100 per package in compliance with MIL-STD-2073-1E, MIL-STD-129, and RP001, with hazardous materials labeled according to 29 CFR 1910.1200. The performance location is specified as Tinker AFB, and the response deadline for this opportunity is September 24, 2026.

Other Fabricated Wire Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Black PVC Nonmetallic TubingThis subcontract involves the supply of 1,744 units of black PVC nonmetallic tubing for prime contractors supporting the Department of Defense Fluid Handling Division. The provider must manufacture or source tubing that adheres to NSN 4710013710322 specifications, with performance taking place in Texarkana, Texas. Compliance requires strict adherence to RP001 packaging standards and IP025 hazardous materials shipping protocols. Eligible bidders must possess a valid CAGE code and UEI. The solicitation was posted on September 13, 2026, with a response deadline of September 24, 2026, under NAICS code 326121.

Unlaminated Plastics Profile Shape Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supplier of Nonmetallic Tubing (NSN 4720014640400)This subcontract with the Department of Defense Fluid Handling Division involves the supply of 797 units of nonmetallic tubing, specifically NSN 4720-01-464-0400, for 2KW Tactical Quiet systems. The supplier is responsible for manufacturing or sourcing the tubing according to strict NSN technical specifications, ensuring all items are marked per MIL-STD-129 and packaged in accordance with RP001 and MIL-STD-2073-1E. Additionally, the provider must supply Material Safety Data Sheets for any hazardous materials as required by 29 CFR 1910.1200. The project falls under NAICS code 325211 and is to be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 13, 2026, with a response deadline of September 24, 2026.

Plastics Material and Resin Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Tygothane Nonmetallic TubingThis subcontract, issued by the Department of Defense Fluid Handling Division, involves the procurement and supply of 16,130 feet of Saint-Gobain Performance Plastics 61501 Tygothane nonmetallic tubing with a .625ID x .750 OD. The contractor is responsible for ensuring the tubing meets NSN 4720011766328 specifications and adheres to RP001 DLA Packaging Requirements for Procurement and RQ011 identification standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 326122, with the place of performance located in New Cumberland, Pennsylvania. The solicitation was posted on September 13, 2026, with a response deadline of September 24, 2026.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Fluid Filter Elements (NSN 2940-01-614-6256)

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Sediment Strainer Element (NSN 4730017134869)This subcontract involves the supply of one sediment strainer element, identified by NSN 4730017134869, for prime contractors supporting the Department of Defense Fluid Handling Division. The contractor is required to package the material according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements, while providing Safety Data Sheets for any hazardous materials. The delivery of the physical strainer element must be completed within 10 days of the contract award. Performance for this requirement is centered at Fort Bliss, Texas, under NAICS code 326122.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Brass Pipe Nipples (NSN 4730-00-537-9890)This subcontract involves the supply of 139 brass pipe nipples with a 1.00-inch nominal pipe size and center hex wrenching facilities for prime contractors supporting the Department of Defense Fluid Handling Division. The items must be packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129. The completed order is to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The solicitation was posted on September 13, 2026, with a response deadline of September 24, 2026, under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supplier of Compressed Gas Cylinder Caps (NSN 8120004028435)This subcontract involves the supply of seven compressed gas cylinder caps, specifically Mission Systems Davenport Inc. part number 1610647-1 with NSN 8120004028435, to support prime contractors for the Department of Defense Fluid Handling Division. The items must be packaged according to ASTM D3951 and labeled in compliance with MIL-STD-129 and the Hazard Communication Standard 29 CFR 1910.1200. The contract is categorized under NAICS code 332999 and specifies a place of performance in Tracy, California. Prospective suppliers should be aware that a CMMC Level 2 Self-Assessment may be required. The response deadline for this opportunity is September 24, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS