This Government Contract opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

First Article Testing and Validation Services

Closed

Federal

Submission Closed09/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps Center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material floor tiles in the Gymnasium (approximately 600 square feet) and the Warehouse and Storage areas (approximately 3,600 square feet combined). All activities must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested offerors must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification form, proof of insurance, and three references for similar projects by October 21, 2026, at 3:00 PM CT. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination SCA 2015-5019 Rev 31, and includes various FAR clauses regarding small business utilization, labor standards, and information security. Invoicing is to be submitted on a weekly or bi-weekly basis.

POSTED

DEADLINE

Electronic Functional Testing and ValidationThis subcontract for Electronic Functional Testing and Validation supports Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves performing final operational and functional testing of repaired Circuit Card Assemblies for prime contractors. This process requires the use of specialized test benches and simulators to replicate engine control environments, ensuring all test procedures are executed according to specific Cage Code requirements. Key deliverables include the verification of physical identification in compliance with MIL-STD-130 and the generation of essential validation data for Government Source Inspection. The final requirement for the contractor is the delivery of a certified Test Report. The opportunity is categorized under NAICS code 541380, with a response deadline set for October 19, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality ValidationThis subcontract for Non-Destructive Testing (NDT) and Quality Validation supports Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves performing First Article and Production Lot testing to validate the structural integrity of clamping rings using Ultrasonic, Radiographic, Magnetic Particle, or Dye Penetrant methods. To ensure technical compliance, all work must be performed by technicians holding NAS 410 or ISO 9712 certifications. The selected contractor is responsible for delivering detailed NDT Inspection Reports and Certifications of Conformance for every lot processed. This opportunity falls under NAICS code 541380, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Acceptance Testing and Quality Conformance InspectionThis subcontract for Acceptance Testing and Quality Conformance Inspection involves performing independent testing and inspection of repaired Cylinder Assembly A for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider will execute test protocols based on approved repair manuals and conduct random repair assessment testing using calibrated test stands that comply with ANSI/NCSL Z540.3 or ISO-10012-1 standards. To qualify, the contractor must maintain ISO 9001 or SAE AS9100 certification and is responsible for delivering certified test reports and inspection data for every serial number processed. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Materials TestingThis subcontract for Non-Destructive Testing (NDT) and Materials Testing involves providing specialized material testing services to evaluate internal bridge conditions for prime contractors working on Montana Department of Transportation projects. The scope of work includes performing ground penetrating radar, ultrasonic testing, and concrete core sampling to ensure structural integrity. The selected provider will be responsible for delivering detailed NDT test results and comprehensive material condition reports. The opportunity is categorized under NAICS code 541380 and was posted on October 7, 2026, with a response deadline of November 4, 2026. Interested parties can find further details and submission guidelines through the State of Montana's procurement portal.

POSTED

DEADLINE

CSA Certified Geotechnical Testing Laboratory

MPE a division of Englobe

POSTED

DEADLINE

Pipeline Testing and DisinfectionThis subcontract for the City of Shafter involves providing specialized pipeline testing and disinfection services for new water mains. The selected contractor will be responsible for performing hydrostatic pressure testing, flushing, and chemical chlorination in strict accordance with AWWA standards. Key deliverables include the provision of water quality certification for all disinfection processes and the submission of certified test reports and disinfection clearances. The project is located in Shafter, California, and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of October 30, 2026. This role serves as a support function for prime contractors managing the city's pipeline infrastructure projects.

POSTED

DEADLINE

Water Quality Testing & Laboratory AnalysisThis subcontract opportunity involves providing technical sampling and laboratory analysis of water sources for prime contractors working on California Department of Veterans Affairs facility projects in Ventura. The selected provider will be responsible for collecting water samples, ensuring secure transport under a strict chain-of-custody, and conducting comprehensive chemical and biological analyses to ensure compliance with regulatory thresholds. A critical requirement for this engagement is that the testing laboratory must hold ELAP certification to deliver valid, certified laboratory test reports. Interested parties should note that the response deadline is October 27, 2026, and the work falls under NAICS code 541380.

California Department of Veterans Affairs

POSTED

DEADLINE

Soils Engineer / Geotechnical ConsultantThis subcontract opportunity is for a Soils Engineer or Geotechnical Consultant to provide testing and certification of fill materials for prime contractors working on City of Fresno demolition projects. The primary scope of work involves testing imported fill material used in septic tank backfilling to verify that materials achieve a minimum of 90 percent maximum dry density. The selected consultant will utilize specialized soil compaction equipment, such as nuclear gauges, and is responsible for delivering detailed compaction test reports and density certifications. Qualified candidates must hold a valid California Professional Engineer license to perform these services in Fresno, California. The solicitation was posted on October 7, 2026, with a response deadline of November 3, 2026. This project falls under NAICS code 541380 and is focused on ensuring structural integrity and regulatory compliance for municipal demolition and backfilling activities.

POSTED

DEADLINE

RFP #26-1027 - SPECIAL INSPECTIONS AND CONSTRUCTION MATERIAL TESTING SERVICES (BHHES)

Solicitation # PE-62910-NONST-2027-000000096

The Clarke County Board of Education is soliciting competitive sealed proposals under RFP 26-1027 for special inspections and construction material testing services for the Bettye Henderson Holston Elementary School project in Georgia. This solicitation, identified by event number PE-62910-NONST-2027-000000096, was posted on October 7, 2026. The selected contractor will be responsible for providing specialized testing and inspection services as outlined in the Request for Proposal and Bid Specifications. Interested parties must submit their proposals to the Clarke County School District SPLOST Office at 145 Paradise Blvd., Athens, Georgia, 30607, no later than 11:00 AM on October 27, 2026. Bidding documents are available via email from Troy Bassett. Once submitted, bids cannot be withdrawn for sixty days. The school district maintains the right to reject any submittals and waive technicalities or informalities during the selection process.

Clarke County Board of Education

POSTED

DEADLINE

Soil Density Testing and ReportingThis subcontract for Soil Density Testing and Reporting involves performing compaction testing on backfill materials for prime contractors working on Hernando County Utilities Department projects. The scope of work specifically requires conducting density tests for roadway open cut backfill using nuclear density gauges, with a minimum requirement of one test per six-inch lift per travel lane. The selected provider must be a certified geotechnical testing laboratory or technician capable of providing comprehensive laboratory services and formal reporting. The primary deliverable is the submission of passing density test reports. Interested parties should note the response deadline of November 9, 2026.

POSTED

DEADLINE

Environmental Testing and InspectionThis subcontract for Environmental Testing and Inspection involves providing quality assurance testing for prime contractors working on Texas Department of Transportation bridge replacement projects. The scope of work includes conducting soil compaction testing, concrete cylinder testing, and SWPPP inspections to ensure project standards are met. The selected provider is responsible for delivering all necessary compliance documentation and certified test reports. To qualify for this engagement, the contractor must operate a certified testing laboratory and possess a Professional Engineering license. Interested parties should note that the response deadline is November 4, 2026, and the project falls under NAICS code 541380.

Texas Department of Transportation

POSTED

1 day ago

DEADLINE

in 27 days

AI Contract Overview

This subcontract for First Article Testing and Validation Services supports prime contractors delivering DLA supply contracts for the Department of Defense at the New Cumberland facility. The scope of work involves executing the First Article Test protocol for Item 9330 / 15021530, which includes verifying part dimensions, material properties, and overall performance against the technical data package using material analysis labs and precision measurement tools. The final deliverable for this engagement is a comprehensive FAT Test Report. The project falls under NAICS code 541380 and requires strict adherence to ITAR and EAR regulations, as well as CMMC Level 2 certification. Interested parties must respond by September 14, 2026, to the solicitation posted on September 2, 2026.

General Info

Subcontract for First Article Testing and Validation Services for DoD supply contracts.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E5-26-T-4187.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLASTIC MATERIAL, CELLU

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 2

subcontract

Response DeadlineSep 14

Deadline has passed

Submission Closed

09/14/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressN/A

ContactsNo contact information available

Full Description

Performs technical testing and validation for prime contractors delivering DLA supply contracts. Executes the First Article Test (FAT) protocol for Item 9330 / 15021530, verifying part dimensions, material properties, and performance against the technical data package using precision measurement tools and material analysis labs. Requires CMMC Level 2 and ITAR/EAR compliance. Delivers a FAT Test Report.