Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing and Validation Services

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing and Validation Services supports the DLA Weapons Support Fluid Handling Division. The selected contractor will perform testing on four units of NSN 4710-01-069-5938 in accordance with government technical data and specifications. Performance will take place in Tracy, California, and requires the contractor to maintain JCP certification for export-controlled data access and adhere to either SAE AS9003 or ISO 9001 quality standards. The project mandates the delivery of a formal First Article Test Report within 20 calendar days of the award. Interested parties must respond by November 9, 2026, for this effort categorized under NAICS code 541380.

General Info

Testing and validation of four NSN 4710-01-069-5938 units in Tracy, California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-1924.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE ASSEMBLY, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs first article testing for prime contractors on DLA Weapons Support Fluid Handling Division projects. Tests four units of NSN 4710-01-069-5938 per government technical data and specifications. Requires JCP certification for access to export-controlled data and adherence to SAE AS9003 or ISO 9001 quality standards. Delivers a formal First Article Test Report within 20 calendar days of award.

Similar Contracts

Same NAICS industry code

Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.

California Department of Transportation

POSTED

about 13 hours ago

DEADLINE

Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.

Gwinnett County Government

POSTED

about 14 hours ago

DEADLINE

Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.

OC Waste & Recycling

POSTED

about 15 hours ago

DEADLINE

Certified Independent Concrete Testing Laboratory ServicesThis subcontract for Certified Independent Concrete Testing Laboratory Services involves providing independent quality control testing for prime contractors working on Maryland Transit Administration light rail projects. The scope of work requires the securing of samples according to ASTM C 172, the curing of specimens per ASTM C 31, and the execution of compressive strength tests on cylinders to ensure a design strength of 7,000 psi. The selected provider is responsible for delivering all necessary certified test reports and comprehensive QA/QC documentation. This opportunity falls under NAICS code 541380, with a response deadline set for November 17, 2026.

Maryland Transit Administration

POSTED

about 16 hours ago

DEADLINE

Environmental & Material Testing ServicesThis subcontract opportunity for Environmental and Material Testing Services supports prime contractors working on historic facility projects within Warren County, Virginia, specifically in Front Royal. The selected provider will be responsible for conducting comprehensive material testing and identifying hazardous substances, including lead and asbestos, while performing necessary environmental reviews. To qualify, contractors must possess the required certifications for environmental sampling and laboratory analysis. Key deliverables for this engagement include detailed material testing reports and the provision of environmental clearance or remediation plans. Interested parties must submit their responses by November 19, 2026.

POSTED

about 16 hours ago

DEADLINE

Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.

University of Massachusetts System

POSTED

about 17 hours ago

DEADLINE

West Garage Modernization - 3rd Party Testing

Solicitation # BD-27-1109-UMMS-UMMS-134854

The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.

University of Massachusetts System

POSTED

about 17 hours ago

DEADLINE

Site Investigation and Field TestingThis subcontract opportunity for the City of Virginia Beach involves providing site investigation and field testing services for stormwater projects. The selected contractor will be responsible for conducting site visits, field reconnaissance, and technical testing to determine soil and site conditions using soil boring rigs and specialized equipment. Key deliverables include the provision of comprehensive site investigation reports and detailed field testing data. To qualify for this engagement, the contractor must employ a Professional Geologist or a Professional Engineer. The work will be performed within Virginia Beach under NAICS code 541380. Interested parties must submit their responses by the deadline of December 11, 2026.

City of Virginia Beach

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.

DAS Procurement

POSTED

about 18 hours ago

DEADLINE

Environmental Testing & Sampling LaboratoryThis subcontract opportunity is for an Environmental Testing and Sampling Laboratory to provide specialized analysis and sampling services for prime contractors working on New York State Education Department and Office of General Services projects. The selected provider will be responsible for sampling and analyzing suspect materials, specifically focusing on lead-based paint and PCB-containing caulk, to determine if abatement is necessary. The scope of work includes the use of laboratory equipment for the detection of asbestos and PCBs, culminating in the delivery of comprehensive Hazardous Materials Survey Reports. To be eligible, the laboratory must hold certifications that meet all applicable EPA and New York State standards. This procurement falls under NAICS code 541380 and is managed through the NYS OGS Design and Construction agency. Interested parties must submit their responses by the deadline of December 9, 2026.

NYS OGS Design & Construction - Construction Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Medical Device Sterilization and PackagingThis subcontract for the Department of Defense Medical Supply Chain involves providing final sterile sealing and packaging services for prime contractors fulfilling DLA medical supply contracts. The scope of work requires the sealing of kits and the execution of EtO or Gamma radiation sterilization within a cleanroom environment, strictly adhering to ASTM D3951 and MIL-STD-129 standards. All deliverables must be provided as individually sealed, sterile boxes containing ten units each. To ensure quality and safety, the contractor must maintain sterilization validation according to ISO 11135 or 11137 and comply with Medical Marking Standard No. 1. The performance of this contract will take place in San Antonio, Texas. Interested parties should note the response deadline of November 2, 2026, for this specialized medical device sterilization and packaging requirement.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

First Article Test (FAT) and CertificationThis subcontract involves performing First Article Testing for prime contractors supporting the Department of Defense DLA Weapons Support Aviation Supply Chain. The scope of work focuses on the dimensional inspection and material verification of units for NSN 5315-01-609-5305, utilizing CMM and calibrated aerospace gauges to ensure compliance with technical data packages. The final deliverables for this project include a comprehensive FAT report and an approved sample. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain JCP certification to ensure full ITAR and EAR compliance. The work is designated under NAICS code 541380 and will be performed at Joint Base Lewis McChord. Interested parties must respond by November 4, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Marine Metal Door Manufacturer/Supplier

Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Quick Disconnect Reducers (Wastewater)This subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the supply of four specialized quick disconnect reducers for wastewater applications. The hardware must be 4 inch female by 2 inch male, tan with a purple stripe, and match Echelon Supply and Service part number 3020269-3 and NSN 4730015586897. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Additionally, the supplier must ensure full compliance with the Buy American Act and the Berry Amendment. Performance for this contract is designated for APO 96213-2166.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and CratingThis subcontract involves providing specialized packaging and crating services for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the packaging of sensitive defense hardware, specifically tube assemblies, ensuring all materials and processes adhere to ASTM D3951 standards. Additionally, the contractor is responsible for all labeling and marking in strict accordance with MIL-STD-129. The final deliverable is a shipment-ready packaged assembly to be delivered to the Naval Sea Logistics Center in Keyport, Washington. This opportunity is categorized under NAICS code 488510, with a response deadline set for November 9, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Fueling Tube Assembly ManufacturingThis subcontract involves the manufacture of a high-precision metal fueling tube assembly for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating one completed assembly under NSN 4710-01-348-1989, adhering strictly to technical drawings 53711 5547826, 53711 5547818, and 53711 5547815, as well as the DLA Master List of Technical and Quality Requirements. Performance of the contract will take place in Keyport. To be eligible, the provider must meet rigorous security and quality standards, including CMMC Level 2 compliance and ITAR/EAR authorization. Additionally, certification under the US/Canada Joint Certification Program is required. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026, falling under NAICS code 332710.

POSTED

about 19 hours ago

DEADLINE

Supply of Raw Materials for Drainage Traps

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 19 hours ago

DEADLINE

Manufacture of Drainage Pipe Traps (NSN 4730-01-191-4109)

Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Mortise Latches (NSN 5340-00-794-0722)

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Aerospace-Grade Raw Material SupplyThis subcontract involves the supply of aerospace-grade certified raw materials for prime contractors working on projects for the DLA Weapons Support Fluid Handling Division. The materials must strictly adhere to the chemical and physical properties outlined in Basic Drawing NR 80064 4684164, Revision D, and must be delivered with comprehensive Mill Test Reports. Compliance with the Buy American Act is mandatory, and the use of Class I ozone-depleting chemicals is strictly prohibited. The performance of this contract is centered in Kings Bay, and the solicitation is categorized under NAICS code 331210.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 19 hours ago

DEADLINE

Precision Machining and Fabrication of Actuator HousingThis subcontract involves the precision machining and fabrication of one Actuator Housing for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is required to manufacture the part in strict accordance with Basic Drawing NR 80064 4684164, Revision D, while ensuring full adherence to MIL-STD-2073-1E and MIL-STD-129 standards. The final deliverable is a single, marked, and packaged Critical Application Item to be performed in Kings Bay. Due to the nature of the project, the contractor must maintain ITAR/EAR compliance and hold CMMC Level 2 certification. The opportunity was posted on October 27, 2026, with a response deadline of November 9, 2026. This procurement falls under NAICS code 332710 for machining services.

POSTED

about 19 hours ago

DEADLINE

Supply of Air Duct Hose (NSN 4720008221257)This subcontract involves the sourcing and manufacture of air duct hose, identified by NSN 4720008221257, for prime contractors serving the Department of Defense DLA Weapons Support Fluid Handling Division. The selected provider must ensure all materials strictly adhere to the required technical specifications and coordinate logistics through the First Destination Transportation program. The contract requires the delivery of 41,500 PG of air duct hose to Robins Air Force Base by March 2, 2027. Operating under NAICS code 423830, the agreement focuses on the precise procurement and timely distribution of these specialized components to support military fluid handling operations.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Supplier of Straight Tube-to-Hose AdaptersThis subcontract involves the supply of straight tube-to-hose adapters for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or procuring two units that strictly adhere to NSN 4730011738344 and PN 80152 specifications, while ensuring full compliance with the DLA Master List of Technical and Quality Requirements and established packaging standards. The project falls under NAICS code 332710 and is designated for performance at Little Rock AFB. Interested parties must submit their responses by November 9, 2026, following the solicitation posted on October 27, 2026.

POSTED

about 19 hours ago

DEADLINE

Metal Tube Assembly Supplier (NSN 4710-00-703-2850)This subcontract involves the fabrication and supply of 16 Metal Tube Assemblies for prime contractors supporting DLA and Army supply contracts. The assemblies must be manufactured according to Basic Drawing NR 81205 35-4382 Revision G and require a chemical conversion coating compliant with MIL-C-5541, Class 1A. Due to the critical nature of these items, the supplier must possess precision metal tubing equipment and specialized chemical processing tanks. The project falls under NAICS code 332710 and is managed by the DLA Weapons Support Fluid Handling Division of the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. All deliverables must strictly adhere to FASCSA and DFARS 252.225-7059 regulations. The response deadline for this requirement is November 2, 2026.

POSTED

about 19 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Third-Party Quality Assurance and Airworthiness Certification

POSTED

about 19 hours ago

DEADLINE

FAA Airworthiness Certification & Traceability Audit

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

SURCH, EXPEDITED SVC, 3 BUSINESS DAYS

Solicitation # SP450026F6679

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

TUS and SAT Thermal Validation

POSTED

about 24 hours ago

DEADLINE

Third-Party Quality Inspection and Certification

Navsup Weapon Systems Support Mech

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Systems Integration & Qualification Testing

Naval Air Warfare Center Air Division

POSTED

about 24 hours ago

DEADLINE

CSI Testing and Quality Inspection for Naval Pressure Vessels

Pa DLA Aviation At Philadelphia

POSTED

about 24 hours ago

DEADLINE

in about 1 month

ISO 17025 Materials Testing and Certification

Pnnl Contracts - DOE Contractor

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Critical Safety Item (CSI) Inspection and Certification

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality Inspection

Ok DLA Aviation At Oklahoma City

POSTED

about 24 hours ago

DEADLINE

NDT Inspection Services

W071 Endist Portland

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS