Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

NDT Inspection Services

Active

Federal

Response Deadline11/30/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity for NDT Inspection Services is issued by the Department of Defense under the W071 Endist Portland agency. The selected contractor will provide critical non-destructive testing for prime contractors working on USACE projects, specifically focusing on the inspection of welds and base metal. Utilizing ultrasonic, magnetic particle, or dye penetrant methods, the contractor is responsible for identifying cracks and defects through both pre-repair and post-repair evaluations to ensure overall structural integrity. The scope of work requires the delivery of comprehensive inspection reports verifying the results of all testing phases. This requirement falls under NAICS code 541380 and is associated with a place of performance in zip code 98635. Interested parties must submit their responses by the deadline of November 30, 2026.

General Info

Agency

Department Of Defense → W071 Endist Portland

NAICS

541380 - Testing Laboratories and Services

Place of Performance

OR, 98635

Set-Aside

NONE

Documents

This scope was carved out of W9127N27BA010.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NAVIGATION LOCK TAINTER VALVE (TV) REPAIR, TV1

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W071 Endist Portland

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W071 Endist Portland

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs pre-repair and post-repair non-destructive testing (NDT) for prime contractors on USACE projects. Inspects welds and base metal for cracks and defects using ultrasonic, magnetic particle, or dye penetrant methods. Delivers detailed pre- and post-repair inspection reports verifying structural integrity.

Similar Contracts

Same NAICS industry code

Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.

California Department of Transportation

POSTED

about 12 hours ago

DEADLINE

Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.

Gwinnett County Government

POSTED

about 13 hours ago

DEADLINE

Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.

OC Waste & Recycling

POSTED

about 14 hours ago

DEADLINE

Certified Independent Concrete Testing Laboratory Services

Maryland Transit Administration

POSTED

about 15 hours ago

DEADLINE

Environmental & Material Testing ServicesThis subcontract opportunity for Environmental and Material Testing Services supports prime contractors working on historic facility projects within Warren County, Virginia, specifically in Front Royal. The selected provider will be responsible for conducting comprehensive material testing and identifying hazardous substances, including lead and asbestos, while performing necessary environmental reviews. To qualify, contractors must possess the required certifications for environmental sampling and laboratory analysis. Key deliverables for this engagement include detailed material testing reports and the provision of environmental clearance or remediation plans. Interested parties must submit their responses by November 19, 2026.

POSTED

about 15 hours ago

DEADLINE

Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.

University of Massachusetts System

POSTED

about 16 hours ago

DEADLINE

West Garage Modernization - 3rd Party Testing

Solicitation # BD-27-1109-UMMS-UMMS-134854

The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.

University of Massachusetts System

POSTED

about 16 hours ago

DEADLINE

Site Investigation and Field TestingThis subcontract opportunity for the City of Virginia Beach involves providing site investigation and field testing services for stormwater projects. The selected contractor will be responsible for conducting site visits, field reconnaissance, and technical testing to determine soil and site conditions using soil boring rigs and specialized equipment. Key deliverables include the provision of comprehensive site investigation reports and detailed field testing data. To qualify for this engagement, the contractor must employ a Professional Geologist or a Professional Engineer. The work will be performed within Virginia Beach under NAICS code 541380. Interested parties must submit their responses by the deadline of December 11, 2026.

City of Virginia Beach

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.

DAS Procurement

POSTED

about 17 hours ago

DEADLINE

Environmental Testing & Sampling Laboratory

NYS OGS Design & Construction - Construction Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Medical Device Sterilization and PackagingThis subcontract for the Department of Defense Medical Supply Chain involves providing final sterile sealing and packaging services for prime contractors fulfilling DLA medical supply contracts. The scope of work requires the sealing of kits and the execution of EtO or Gamma radiation sterilization within a cleanroom environment, strictly adhering to ASTM D3951 and MIL-STD-129 standards. All deliverables must be provided as individually sealed, sterile boxes containing ten units each. To ensure quality and safety, the contractor must maintain sterilization validation according to ISO 11135 or 11137 and comply with Medical Marking Standard No. 1. The performance of this contract will take place in San Antonio, Texas. Interested parties should note the response deadline of November 2, 2026, for this specialized medical device sterilization and packaging requirement.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

First Article Test (FAT) and CertificationThis subcontract involves performing First Article Testing for prime contractors supporting the Department of Defense DLA Weapons Support Aviation Supply Chain. The scope of work focuses on the dimensional inspection and material verification of units for NSN 5315-01-609-5305, utilizing CMM and calibrated aerospace gauges to ensure compliance with technical data packages. The final deliverables for this project include a comprehensive FAT report and an approved sample. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain JCP certification to ensure full ITAR and EAR compliance. The work is designated under NAICS code 541380 and will be performed at Joint Base Lewis McChord. Interested parties must respond by November 4, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → W071 Endist Portland

Same awarding agency

Fluorocarbon Clay Rubber Seal SupplyThis subcontract opportunity involves the supply of high-performance fluorocarbon clay rubber seals designed for Tainter Valve assemblies on USACE projects. The materials must strictly comply with ISO 15.D1 standards to ensure operational integrity. The selected provider will be responsible for delivering completed seal kits directly to the designated repair facility. Managed by the Department of Defense under the W071 Endist Portland agency, the contract falls under NAICS code 326299. The performance location is situated in zip code 98635. Interested parties must submit their responses by the deadline of November 30, 2026.

All Other Rubber Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Industrial Coatings for Hydraulic StructuresThis subcontract for Industrial Coatings for Hydraulic Structures involves performing surface preparation and applying protective coatings for prime contractors on USACE projects managed by the Department of Defense, specifically the W071 Endist Portland. The scope of work focuses on cleaning and painting hydraulic steel surfaces, culminating in the delivery of a fully coated and protected Tainter Valve. All work must be executed in accordance with Section 09 97 02.50, utilizing industrial-grade coatings. Strict environmental controls are required, specifically maintaining a minimum temperature of 5 degrees Fahrenheit above the dew point. The project falls under NAICS code 238320 and is located in zip code 98635.

Painting and Wall Covering Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Self-Lubricated Bearing and Bushing FabricationThis subcontract involves the supply and fabrication of self-lubricated bushings and thrust washers for prime contractors working on USACE projects under the Department of Defense, specifically the W071 Endist Portland. The scope of work requires the fabrication of components using fabric-reinforced polymer that adheres to ASTM D149, D570, D695, and D3846 standards. The contractor is responsible for delivering finished trunnion bushings and thrust washers along with necessary material certifications and a manufacturer's warranty. The opportunity is categorized under NAICS code 335212 and is associated with a place of performance in zip code 98635. Interested parties should note that the response deadline is November 30, 2026.

Household Vacuum Cleaner Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Hydraulic Steel Repair and FabricationThe Hydraulic Steel Repair and Fabrication subcontract involves providing specialized structural repairs, welding, and machining services for a Tainter Valve on USACE projects. The scope of work includes executing crack and weld repairs on carbon and stainless steel in accordance with AWS D1.6/D1.6M standards, as well as fabricating stainless steel components following ASTM A240/A693 specifications. Additionally, the contractor must perform precision machining to tolerances of plus or minus 0.030 inches to deliver a fully refurbished Tainter Valve assembly. This opportunity is issued under the Department of Defense via the W071 Endist Portland, with the place of performance located in zip code 98635. Interested parties must meet CMMC Level 1 requirements to be eligible. The response deadline for this subcontract is November 30, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Heavy Hauling and Rigging ServicesThis subcontract for Heavy Hauling and Rigging Services involves the specialized transport of a Tainter Valve for prime contractors working on USACE projects at The Dalles Lock and Dam. The selected provider is responsible for all labor, equipment, and materials necessary to securely load, transport, and unload the valve between the dam site and the repair facility. Due to the nature of the hydraulic structure, the project requires the use of heavy-lift cranes, oversized load trailers, and specialized rigging gear to ensure safe delivery to all designated sites. Managed under the Department of Defense via the W071 Endist Portland, the contract falls under NAICS code 484220. The performance of work is located in zip code 98635. Interested parties must note the response deadline of November 30, 2026, following the posting date of October 27, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

in about 1 month

USCG Station at Cape Disappointment

Solicitation # W9127N27R2184

The Department of Defense is conducting market research through a Sources Sought notice for the USCG Station at Cape Disappointment to identify qualified industry partners for critical infrastructure repairs and upgrades. The project, estimated between 50 million and 100 million dollars, focuses on restoring mission readiness by addressing unstable terrain and failing facilities. Key requirements include implementing rockfall slope instability corrective measures, replacing failing dock structures and the vessel haul-out facility, and developing permanent coastal resilience solutions to manage massive sediment migration using modern engineering and nature-based solutions. This is not a request for proposal but an informational inquiry open to both large and small businesses, including various socio-economic categories. Interested parties must submit their capabilities and responses to specific technical questions regarding design-build experience and construction methods by November 15, 2026. Submissions must be sent via the designated MSForms link and email to the provided points of contact, with responses limited to six pages. All firms must be registered in the System for Award Management to be considered.

Other Heavy and Civil Engineering Construction

POSTED

about 23 hours ago

DEADLINE

NAVIGATION LOCK TAINTER VALVE (TV) REPAIR, TV1

Solicitation # W9127N27BA010

The U.S. Army Corps of Engineers Portland District is soliciting firm-fixed-price bids for the repair and rehabilitation of Tainter Valve 1 (TV1) at The Dalles Lock and Dam in Lyle, Washington. The scope of work includes the inspection, transport, and repair of the valve, specifically focusing on crack, weld, and seal repairs, as well as the replacement of bushings. The project also requires the salvage and on-site storage of the retired valve. The estimated construction magnitude is between 1,000,000 and 5,000,000 dollars, with a total performance period of 323 calendar days from the receipt of the Notice to Proceed. This is a full and open procurement under NAICS code 237990, featuring a HUBZone 10 percent price evaluation. Award will be made to the lowest responsive and responsible bidder. Key requirements include CMMC Level 1 (Self) certification, a bid guarantee, and a subcontracting plan for large businesses. Bidders must be U.S. citizens with a REAL ID to attend the mandatory site visit on November 3, 2026. All bids must be submitted in English via PDF email to the designated contracting personnel by November 30, 2026. Performance and payment bonds are required at 100 percent of the original contract price.

Other Heavy and Civil Engineering Construction

POSTED

about 23 hours ago

DEADLINE

in about 1 month

TDA Isolated Phase Bus and Duct Inspection

Solicitation # W9127N27QA002

Solicitation W9127N27QA002 is a Request for Quote issued by the U.S. Army Corps of Engineers, Portland District, for commercial services at The Dalles Lock and Dam. The project scope involves testing the condition of the Isolated Phase Bus and Duct System and the abatement and off-site disposal of approximately 100 to 150 lbs of asbestos-containing material from hatch panel doors. This requirement is a 100 percent small business set-aside under NAICS code 541380, with a size standard of 19 million dollars. The period of performance is scheduled from February 1, 2027, to April 16, 2027. The procurement is conducted under Simplified Acquisition Procedures and requires offerors to be registered in the System for Award Management. Due to the nature of the work, contractors must meet CMMC Level 2 self-verification requirements to access reference drawings and comply with strict safety and security protocols, including OPSEC and CUI training. Technical requirements specify that IR Thermography technicians must hold a minimum Level II certification, and all work must adhere to IEEE C37.23 and NFPA 70E standards. Following several amendments, the closing date for quotes has been extended to November 9, 2027, at 2:00 PM PST.

Testing Laboratories and Services

POSTED

DEADLINE

JOHN DAY DAM NAVIGATION LOCK TAINTER VALVE (TV) REPAIRS TV3 AND TV4

Solicitation # W9127N27BA009

The U.S. Army Corps of Engineers Portland District is soliciting firm-fixed-price bids for the repair and rehabilitation of Tainter Valves TV3 and TV4 at the John Day Lock and Dam in Klickitat County, Washington. The project scope includes crack and weld repair, seal replacement, and the procurement of spare bushings, with an estimated construction magnitude between $1,000,000 and $5,000,000. The work is categorized under NAICS 237990 and is a full and open competition. Mandatory requirements include adherence to EM 385-1-1 safety standards, CMMC Level 1 certification, and the provision of performance and payment bonds. Bidders must also comply with the Davis-Bacon Act and Buy American requirements. The solicitation includes mandatory price items for mobilization and the removal, transport, and repair of TV3, with optional line items for the same services for TV4. Evaluation will include a 10 percent price preference for HUBZone small business concerns and a review of subcontracting plans to ensure goals for small businesses and HUBZone firms are met. Bids must be submitted in PDF format to the designated contracting personnel by 11:00 A.M. PDT on November 19, 2026. Site visits were scheduled for November 3, 2026, requiring attendees to be U.S. citizens with a REAL ID. Performance is expected to begin within 10 calendar days of award, with specific completion timelines of 143 to 233 calendar days depending on the line item.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Marine Safety Equipment Supply & InstallationThis subcontract opportunity involves the supply and installation of marine safety equipment for prime contractors working on USACE pier projects located in Coos Bay, Oregon. The scope of work specifically includes the removal and installation of ladder access systems and life ring enclosures, ensuring all delivered equipment and installation processes comply with USACE safety requirements. Managed by the Department of Defense under the W07 Endist Portland agency, this project is designated as a total Small Business Set Aside. Interested parties must submit their responses by November 23, 2026, for work categorized under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Marine Carpentry & Structural Timber WorkThis subcontract opportunity involves providing specialized marine carpentry services for prime contractors working on USACE pier projects located in Coos Bay, Oregon. The scope of work includes the removal and installation of structural timbers, wooden railings, and plastic lumber, all of which must be secured using marine-grade fasteners. All operations must strictly adhere to EM 385-1-1 safety standards to ensure compliance with Department of Defense requirements. Managed by the W071 Endist Portland under the Department of Defense, this project is designated as a total Small Business Set Aside under NAICS code 238130. The solicitation was posted on October 21, 2026, with a response deadline set for November 23, 2026. The primary deliverable for the selected subcontractor is the successful installation of safety railings and structural timbers at the designated performance site.

Framing Contractors

POSTED

DEADLINE

Potable Water Utility InstallationThis small business set-aside subcontract involves the installation of a potable water distribution line for USACE pier projects located in Coos Bay, Oregon. The scope of work requires the installation of 300 feet of potable water grade piping along with all necessary fittings, valves, elbows, pipe supports, and drain plugs. The contractor is responsible for the installation and pressure testing of a backflow preventer in strict accordance with USACE quality standards. The final deliverable is a fully pressure-tested and operational potable water distribution system. This project is managed under the Department of Defense through the W071 Endist Portland agency.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

MIL-STD Environmental Testing Services

POSTED

about 23 hours ago

DEADLINE

First Article Test (FAT) for Aircraft Support Assembly

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Specialized Aerospace Quality Inspection/Certification

Ok DLA Aviation At Oklahoma City

POSTED

about 23 hours ago

DEADLINE

in about 9 hours

AMS Designated Laboratory Meat Testing Services (ADL)

Solicitation # 12-1NTS-26-R-0002

POSTED

about 23 hours ago

DEADLINE

Granite Surface Plate Calibration and lapping - with Q&As

Solicitation # W519TC27QA007

POSTED

about 23 hours ago

DEADLINE

B--METAGENOMICS & TRANSCRIPTOMIC SERVICES

Solicitation # 140G0226Q0145

Ofc Of Acquisition Grants-Denver

POSTED

about 23 hours ago

DEADLINE

Radiological and Chemical Laboratory Analysis

Contracting Operations Division

POSTED

DEADLINE

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Quality Inspection and Certification

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Quality Assurance and Sampling Inspection for Critical Valve Components

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

NETA Certified Testing Agency

W072 Endist Chicago

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS