Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Assurance and Sampling Inspection for Critical Valve Components

Active

Federal

Response Deadline11/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing independent inspection and verification services for critical valve components on projects for the DLA Weapons Support ASC Commodities Division. The selected provider will execute sampling methods according to MIL-STD-1916 or ASQ H1331 Table 1 to verify critical, major, and minor attributes. Using precision measurement tools, the contractor must ensure zero-defect acceptance and deliver comprehensive inspection reports and certifications of conformance. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 541380. Due to the nature of the technical data involved, strict adherence to ITAR and EAR compliance is required. Interested parties must respond by November 3, 2026.

General Info

Inspection and verification of DLA valve components in Pennsylvania, requiring ITAR/EAR compliance.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-6922.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LEVER AND INSERT, VALVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineNov 3

Submission deadline

Response Deadline

11/03/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent inspection and verification for prime contractors on DLA Weapons Support ASC projects. Executes sampling methods per MIL-STD-1916 or ASQ H1331, Table 1, verifying critical, major, and minor attributes. Utilizes precision measurement tools to ensure zero-defect acceptance. Requires ITAR/EAR compliance for technical data handling. Delivers inspection reports and certifications of conformance.

Similar Contracts

Same NAICS industry code

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 4 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves providing specialized validation for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will use high-precision metrology equipment, such as optical comparators or CMM, to verify that the dimensions and tolerances of a first-article sample for NSN 5305-01-470-6044 align with required technical data. To qualify, the contractor must maintain an inspection system compliant with ISO 9001 or SAE AS9003 standards. The final deliverables for this engagement include the tested first article unit and a completed FAT certification report. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 541380.

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing third-party quality conformance and critical source inspections for prime contractors. The selected provider will conduct inspections at the point of origin, utilizing precision measurement tools and sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to ensure all technical requirements of the DLA Master List RA001 are met. Key deliverables include the submission of detailed inspection reports and formal quality certification documents. The project is managed by the Department of Defense under NAICS code 541380, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 9, 2026, regarding this requirement for specialized quality assurance services.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) and Thread Gaging ServicesThis subcontract opportunity is for the provision of independent laboratory testing and certification services to support prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on conducting First Article Testing and thread gaging for Class 3A and 3B threads to ensure strict compliance with SAE AS8879 Category 1 or MIL-S-7742 standards. The successful provider must deliver a certified First Article Test Report and maintain professional accreditation through either ISO/IEC 17025 or AS9100. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The place of performance is located at Robins Air Force Base. Interested parties must submit their responses by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Insulation Sleeving (NSN 5970-01-218-2102)This subcontract involves the supply of seven units of specialized insulation sleeving, identified by NSN 5970-01-218-2102, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and falls under NAICS code 326199. The contractor is responsible for ensuring all items meet strict military specifications, including packaging to Packing Level B and palletization according to RP001 DLA Packaging Requirements. Additionally, all shipments must be marked in compliance with MIL-STD-129 to ensure proper delivery and handling of the insulation sleeving.

All Other Plastics Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Aerospace Alloy/Bar Stock SupplyThis subcontract for Aerospace Alloy/Bar Stock Supply involves the provision of raw metal bar stock to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for delivering certified raw material that strictly adheres to the chemical and physical properties specified in TDP Rev A Gen 1. To ensure aerospace standard compliance and full material traceability, the contractor must provide detailed Mill Test Reports with all deliveries. The agreement mandates strict adherence to the Buy American and Balance of Payments Program. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 423510. Interested parties must note the response deadline of November 5, 2026, for this Department of Defense requirement.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Close Tolerance Screw Manufacturing (NAS7802U3)This subcontract involves the manufacture of 116 close tolerance screws, part number NAS7802U3, for the DLA Weapons Support ASC Commodities Division. The fabrication process requires precision CNC machining in strict accordance with National Aerospace Standard 80205 and TDP Rev A Gen 1. Quality control must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the final products must adhere to Buy American requirements and MIL-STD-2073-1E packaging standards. The project is categorized under NAICS code 332722 and will be performed in New Cumberland. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supplier of Hamilton Sundstrand Weight ComponentsThis subcontract involves the supply of 19 units of Hamilton Sundstrand Corporation part number 968C593-3, identified by NSN 6115-01-503-8400, to support prime contractors on DLA Weapons Support ASC projects. The selected supplier is responsible for the delivery of these components to designated locations within the United States and Japan. Strict adherence to technical and security standards is required, including packaging and marking according to ASTM D3951 and MIL-STD-129, and palletization per RP001. Additionally, the contractor must maintain compliance with DLA RA001 and NIST SP 800-171 cybersecurity standards. The procurement is managed under NAICS code 423840 for the Department of Defense.

Industrial Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Supply of Insulating Flat Washers (NSN 5970-01-310-1298)This subcontract involves the manufacture or sourcing of five insulating flat washers, identified by NSN 5970-01-310-1298, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires strict adherence to RP001 DLA Packaging Requirements and MIL-STD-129 marking and labeling standards, with performance taking place in Keyport. The contractor must ensure full compliance with the Buy American Act and the Berry Amendment regarding sourcing. Additionally, the provider is required to maintain ITAR and EAR compliance and hold certification under the US/Canada Joint Certification Program. Responses for this requirement are due by November 5, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305-01-406-9165)This subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement and delivery of machine screws identified by NSN 5305-01-406-9165. The contractor is responsible for supplying these fasteners to prime contractors for various defense projects, with physical delivery to designated government locations, including Cherry Point. Logistics for the delivery of these parts are handled through the First Destination Transportation program. Strict manufacturing and sourcing compliance is required for this contract. All parts must be produced without the use of additive manufacturing processes and must adhere to the domestic material restrictions set forth by the Berry Amendment and the Buy American Act. The opportunity is categorized under NAICS code 332722, with a response deadline of November 5, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supplier of Self-Locking Plate Nuts (NSN 5310-01-669-4613)This subcontract involves the supply of 155 self-locking plate nuts, identified by NSN 5310-01-669-4613, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing components that strictly adhere to Boeing part number BACN10TL3A6 and DLA Master List requirements. Performance will take place at Tinker AFB, with all units required to be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and demonstrate compliance with NIST SP 800-171. All delivered hardware must undergo sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Special Purpose Branched Electrical Cable Assembly ManufacturerThis subcontract opportunity is for the manufacture of a single special purpose branched electrical cable assembly for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating NSN 5995-01-474-0591 according to drawing 12983322, ensuring full adherence to MIL-STD-129 and MIL-STD-2073-1E standards. Performance will take place in Fort Bragg, with a response deadline of November 5, 2026. Strict compliance requirements are in place, including ISO 9001:2015 certification, CMMC Level 2, and ITAR/EAR regulations. Additionally, all materials used in the fabrication process must comply with the Berry Amendment and the Buy American Act. The final deliverable consists of one completed, inspected, and packaged cable assembly.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Insulator Plate (NSN 5970004232896)This subcontract involves the manufacture and supply of insulator plates under NSN 5970004232896 for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The contractor is responsible for sourcing or producing the hardware components in strict accordance with specified technical requirements, with a critical prohibition against the use of additive manufacturing or 3D printing. The agreement requires the delivery of physical components FOB Destination within a 20-day window. This procurement falls under NAICS code 334413 and is managed through the DLA, with performance associated with FPO 09514.

Semiconductor and Related Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized packaging, preservation, marking, and palletization services to ensure shipments are ready for delivery. All work must be executed in strict accordance with MIL-DTL-197M for packaging, MIL-STD-129 for marking, and MIL-STD-2073-1E for general standards. The contractor is required to use MIL-SPEC anti-corrosive materials and industrial palletization equipment that meets DLA requirement RP001. The final deliverable is a shipment-ready, palletized bearing delivered FOB Destination. This opportunity falls under NAICS code 488510, with a response deadline set for November 16, 2026.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Annular Ball Bearing Fabrication (PN: 3110-01-034-7002)This subcontract involves the fabrication of one critical application annular ball bearing, part number 3110-01-034-7002, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturing process must strictly adhere to TDP Rev A Gen 1 and Basic QAP 13873 QAP-B02 Revision B. To ensure quality and precision, the contractor is required to utilize precision machining equipment and maintain ISO 9001:2015 certification. The project mandates full compliance with DFARS 252.225-7016 domestic sourcing requirements. The final deliverable is a single finished bearing that meets all specified technical data package requirements. Interested parties must respond by November 16, 2026, under NAICS code 333241.

Food Product Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

HazMat Freight Forwarding and DeliveryThis subcontract opportunity, titled HazMat Freight Forwarding and Delivery, is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The project involves the transportation and delivery of DOT Class 3 flammable chemical liquids, specifically varnish, to various CONUS stock locations. All deliveries must be completed within 85 days after the receipt of an order and must be handled at designated inspection and acceptance points. To qualify, contractors must possess DOT Hazardous Materials certification and licensing, utilizing HazMat-certified transport vehicles and containment equipment. This is a Total Small Business Set-Aside under NAICS code 484220. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 4 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Production Lot Test (PLT) Services

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

NETA Certified Testing Agency

W072 Endist Chicago

POSTED

DEADLINE

Diagnostic Medical Physicist Services

244-NETWORK Contract Office 4 (36C244)

POSTED

DEADLINE

Inspection and Testing Services for B-52 Structural Components

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Aerospace Component Inspection and NDT Services

FA8122 Afsc Pzaab

POSTED

DEADLINE

Electronic Component Testing and Traceability Verification

Ut DLA Aviation At Ogden

POSTED

DEADLINE

Quality Assurance and Testing Services

POSTED

DEADLINE

Testing, Commissioning & Field Services

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

in about 1 month

NRTL Certification & Field Evaluation Services

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

in about 1 month

NDE and Inspection Services

Battelle Energy Alliance–doe Cntr

POSTED

DEADLINE

High-Pressure Hydraulic Testing Services

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

in about 7 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS