Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing and Validation Services

Active

Federal

Response Deadline09/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing and Validation Services involves performing First Article Testing for prime contractors delivering DLA Aviation supply contracts. The scope of work focuses on validating one unit of lot/item 2935 / 12516346 by utilizing inspection equipment to verify the seals and tolerances of aviation filler caps. The contractor is responsible for coordinating approval notifications with the Contracting Officer and delivering the validated test unit and accompanying test report to Tinker AFB. The project is managed by the ASC Supplier Oper OEM Division within the Department of Defense and is categorized under NAICS code 541380. Performance of the services will take place at Hill AFB. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

General Info

Subcontract for First Article Testing of aviation filler caps at Hill AFB.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-26-T-429V.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GOVERNMENT FIRST ARTIC

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 23

Submission deadline

Response Deadline

09/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors delivering DLA Aviation supply contracts. Validates one unit of lot/item 2935 / 12516346 using inspection equipment to verify aviation filler cap tolerances and seals. Coordinates with the Contracting Officer for approval notification and delivers the test unit to Tinker AFB. Delivers a validated First Article unit and associated test report.

Similar Contracts

Same NAICS industry code

Precision Thread Gauging and Inspection ServicesThe Precision Thread Gauging and Inspection Services subcontract, issued by the Department of Defense ASC Commodities Division, involves performing dimensional conformance testing and quality assurance inspections for prime contractors delivering DLA supply contracts. The scope of work focuses on inspecting Class 3A and 3B threads using System 22 of FED-STD-H28/20 and verifying inspection results according to MIL-STD-1916. The service provider is required to use calibrated thread gauges and measurement tools compliant with FED-STD-H28/20 to deliver detailed inspection reports and certifications of conformance. This project falls under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Quality Assurance / Third-Party TestingThis subcontract with the Department of Defense ASC Commodities Division involves providing independent testing and certification of fasteners for prime contractors fulfilling DLA supply contracts. The scope of work includes performing material analysis, hardness testing, and dimensional inspections utilizing precision calipers and metallurgical equipment. To ensure compliance, the provider must maintain ISO/IEC 17025 certification or an equivalent quality standard and is responsible for delivering detailed test reports and Certificates of Conformance. The opportunity is categorized under NAICS code 541380 and is based in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026.

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test (FAT) Services supports Depot Oklahoma projects by performing initial testing and validation of the first production unit for prime contractors. The scope of work involves validating material properties, dimensions, and overall performance against the technical data package specified in CLIN 0002, utilizing specialized material testing labs and metrology equipment. The final deliverable is a FAT Report and certification confirming that the item adheres to all government specifications. The project is managed by the Department of Defense for Depot Oklahoma, with the place of performance located at Tinker AFB. Interested parties must respond by September 28, 2026, under NAICS code 541380.

POSTED

about 7 hours ago

DEADLINE

Production Lot Testing and Quality Validation ServicesThis subcontract for Production Lot Testing and Quality Validation Services involves performing specialized quality conformance testing on aircraft engine parts for prime contractors supporting ASC Supplier Oper AE and AF Div projects. The scope of work includes conducting tests on random samples to validate technical and quality requirements following First Article approval, coordinating sample selection with the Quality Assurance Representative, and delivering comprehensive test results and validation reports. The project is managed by the Department of Defense and will be performed in Jacksonville, Florida. Under NAICS code 541380, the contract requires the delivery of verified quality conformance data to ensure all production lots meet the necessary technical specifications.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Quality Assurance and Certification ServicesThis subcontract for Quality Assurance and Certification Services supports the Department of Defense Nuclear Reactor Program in San Diego. The selected provider will perform independent testing, inspection, and certification for prime contractors, specifically conducting Contractor First Article Testing and generating Production Test and Inspection Reports. The scope includes executing visual inspections according to written procedures to ensure full QAP compliance, with the final delivery consisting of KFAT reports, PTI reports, and signed Certificates of Quality Compliance. The opportunity is a total small business set-aside under NAICS code 541380. Qualified candidates must provide certified quality inspectors and maintain Level III Certification. Interested parties must respond by September 23, 2026, to provide these specialized technical services.

NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking qualified small and disadvantaged business firms to serve as subconsultants for the Oakland and Santa Fe Waterline Replacement project (CIP 5661) in Hemet, California. The scope of work involves providing geotechnical and materials inspection and testing services over an estimated 210 construction working days. Key responsibilities include material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottoms, as well as initial sampling and acceptance testing of proposed materials. The subconsultant must provide a certification memorandum signed by a professional engineer to identify any non-complying materials. This project is funded in whole or in part by a U.S. Environmental Protection Agency Community Grant, requiring strict adherence to federal flow-down provisions, including the Build America, Buy America Act and EPA Disadvantaged Business Enterprise (DBE) requirements under 40 CFR Part 33. Selected firms must comply with California prevailing wage laws, register with the Department of Industrial Relations, and maintain general liability insurance of at least $2,000,000 per occurrence. Interested firms must submit a technical proposal, a firm-fixed fee proposal, and documentation of their small or disadvantaged business certifications. Award is contingent upon the selection of Albert A. Webb Associates by the City of Hemet.

Albert A. Webb Associates

POSTED

about 8 hours ago

DEADLINE

Genomic Sequencing Services (AVITI Platform)This subcontract for the Department of Agriculture's Region 3 Southwestern Regional Office involves providing high-throughput genomic sequencing services for wheat DNA libraries on USDA Agricultural Research Service projects. Utilizing the AVITI Genomic Sequencing system, the contractor is responsible for the entire workflow from sample receipt to the delivery of raw sequence data files, including the execution of both Paired End and Single End sequencing runs. The opportunity is designated as a total Small Business Set Aside under NAICS code 541380. Performance will take place in Raleigh, North Carolina, with a response deadline of September 21, 2026.

Region 3 Southwestern Regional Office

POSTED

about 12 hours ago

DEADLINE

DNA Library Quality Control (QC) ServicesThis small business set-aside subcontract with the Department of Agriculture, Region 3 Southwestern Regional Office, involves providing quality control validation for government-constructed wheat DNA library pools. The contractor will support prime contractors on USDA Agricultural Research Service projects by performing fluorometric quantification via Qubit, Tapestation analysis for purity and size distribution, and qPCR validation. These processes ensure that 22 DNA library pools meet minimum industry sequencing-library quality control standards. The work will be performed in Raleigh, North Carolina, utilizing specialized equipment including Qubit fluorometers, Agilent TapeStation, and qPCR thermal cyclers. The final deliverable for this engagement consists of comprehensive QC validation reports for all processed library pools.

Region 3 Southwestern Regional Office

POSTED

about 12 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports prime contractors on Air Force aircraft component projects. The selected provider will develop First Article Test Plans and perform rigorous testing on samples to ensure full compliance with government qualification standards. This process involves the use of precision measurement and material testing equipment to conduct essential tensile, thermal, and chemical analyses. The primary deliverables for this engagement include a comprehensive First Article Test Plan and three validated samples. Managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, the opportunity falls under NAICS code 541380. Interested parties must submit their responses by October 15, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 12 hours ago

DEADLINE

Board Testing and Quality AssuranceThe Board Testing and Quality Assurance subcontract supports NAVSUP Weapon Systems Support projects within the Department of Defense. The selected provider will perform independent verification, testing, and validation of assembled cards for prime contractors, utilizing specialized processes such as in-circuit testing, flying probe testing, environmental stress screening, and X-ray inspection for BGA solder joints. The scope of work requires the delivery of detailed test reports and formal certifications of compliance to ensure all components meet necessary standards. This opportunity is categorized under NAICS code 541380, with a response deadline of October 19, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Wheat DNA Library Sequencing

Solicitation # 127EAV26Q0125

Region 3 Southwestern Regional Office

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Dial Indicator Pressure GaugesThis subcontract with the Department of Defense ASC Supplier Oper OEM Division involves the supply of 28 dial indicator pressure gauges for prime contractors fulfilling DLA supply contracts. The contractor is responsible for manufacturing or sourcing units that adhere to NSN 6685 requirements and RA001 technical and quality standards. The scope of work includes physical identification and bare item marking according to RQ017 and MIL-STD-129, with packaging performed in accordance with RP001. Performance of this contract will take place in New Cumberland, Pennsylvania, under NAICS code 334517.

Irradiation Apparatus Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Recessed Washers (NSN 5310014476251)This subcontract with the ASC Supplier Oper OEM Division of the Department of Defense involves the supply of 89 recessed washers for aerospace projects. The hardware must match Bell Textron Inc part number 140-007-41S34-2 and national stock number 5310014476251. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The contractor is required to adhere to strict quality and packaging standards, including sampling per MIL-STD-1916 or ASQ H1331 and packaging according to ASTM D3951 and MIL-STD-129. Additionally, the supplier must comply with DFARS 252.225-7001 Buy American requirements. The response deadline for this solicitation is September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Connector, Receptacle (NSN 4920015654253)This subcontract involves the procurement of Connector, Receptacle units under NSN 4920015654253 for the Department of Defense. The selected provider is responsible for sourcing or manufacturing the parts in strict accordance with the DLA Master List of Technical and Quality Requirements to support prime contractors delivering to the DLA Distribution DDSP New Cumberland Facility. The contract requires the delivery of the specified physical quantity of units by the need ship date of March 14, 2027. All packaging and shipping protocols must be adhered to for delivery to the performance site in New Cumberland, Pennsylvania. This requirement falls under NAICS code 423610 and is managed by the ASC Supplier Oper OEM Division.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Component Supply (Sub-Tier Materials)This subcontract under the ASC Supplier Oper OEM Division of the Department of Defense involves the sourcing and delivery of high-grade alloys, polymers, and precision-turned components. The primary objective is to supply raw materials and sub-components, including seals, springs, and housings, specifically required for part number 7018343120 to support prime contractors. The contract requires strict adherence to domestic origin requirements for all delivered materials. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 331210. Interested parties must respond by September 23, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 7 hours ago

DEADLINE

Specialized Packaging and LogisticsThis subcontract with the Department of Defense ASC Supplier Oper OEM Division focuses on providing specialized packaging and marking services for regulator assemblies. The contractor is responsible for applying bare item markings and packaging assemblies for transport and long-term storage using industrial equipment and DLA-compliant materials, ensuring strict adherence to RP001 DLA Packaging Requirements and RQ017 Physical Identification standards. The work is performed at Hill AFB, Utah, under NAICS code 488991. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Packing and Crating

POSTED

about 7 hours ago

DEADLINE

Regulator Assembly ManufacturingThis subcontract with the Department of Defense ASC Supplier Oper OEM Division involves the manufacture and supply of two Regulator Assemblies, part number 7018343120, and associated actuators. The scope of work includes precision machining, unit assembly, and quality assurance testing conducted at Hill AFB. The contractor must adhere to RT001 standards for testing and comply with RC001 Source Approval Requests and RQ017 Bare Item Marking requirements. All production must be carried out using calibrated testing equipment and precision machining tools to ensure full compliance with the technical specifications.

POSTED

about 7 hours ago

DEADLINE

Aircraft Pressure Relief Valve SupplierThis subcontract with the Department of Defense ASC Supplier Oper OEM Division involves the supply of 10 aircraft pressure relief valves for prime contractors on DLA supply contracts. The supplier is responsible for manufacturing or sourcing components that meet NSN 4920015016764 specifications, ensuring all parts are free of Government Identification according to RQ011. Quality control must be performed using calibrated M&TE per RT001, and all packaging and marking must adhere to MIL-STD-129. The contract is categorized under NAICS code 336413 and specifies the place of performance in New Cumberland, Pennsylvania. The response deadline for this opportunity is September 23, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Fuel Management Panel Supply (NSN 6610-01-549-4960)This subcontract involves the manufacture and supply of one Fuel Management Panel meeting NSN 6610-01-549-4960 specifications for prime contractors on DLA supply contracts. The selected provider must ensure all hardware is marked according to MIL-STD-129 and maintain strict supply chain traceability in compliance with DLAD Procurement Notes C03. Additionally, the contractor is responsible for providing all necessary documentation to support a Source Approval Request. The project is managed by the Department of Defense under the ASC Supplier OEM Division, with performance taking place in New Cumberland, Pennsylvania. The contract falls under NAICS code 334511 and requires the delivery of the completed panel alongside all required traceability and SAR documentation. Interested parties must respond by September 23, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Retaining Ring Sets (NSN 5365-01-676-3358)

Sporting and Recreational Goods and Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Supply of Switch Levers (NSN 2835005488161)This subcontract, issued by the Department of Defense ASC Supplier Oper OEM Division, involves the procurement and delivery of three switch levers under NSN 2835005488161. The items are intended for prime contractors supporting DLA Aviation supply contracts, with the place of performance located at Hill AFB. The contractor must ensure all deliveries comply with Federal Standard No. 313 and 29 CFR 1910.1200(g) regarding Hazard Warning Labels and Safety Data Sheets. The response deadline for this requirement is September 23, 2026, and the contract falls under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Supply of Dial Indicating Pressure Gages

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 7 hours ago

DEADLINE

High-Temperature Alloy/Material SupplierThis subcontract, titled High-Temperature Alloy/Material Supplier, involves the sourcing and delivery of certified aerospace-grade metals and tubing, including Inconel, stainless steel, and specialized heat-resistant alloys. These materials are supplied to prime contractors for the production of engine exhaust systems for the ASC Supplier Oper OEM Division under the Department of Defense. The place of performance is located in New Cumberland, Pennsylvania. The supplier is responsible for delivering either certified raw materials or semi-finished components and must provide comprehensive Mill test reports to ensure quality. Due to the nature of the materials, strict compliance with ITAR and EAR regulations for controlled materials is required. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026, under NAICS code 331221.

Rolled Steel Shape Manufacturing

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS