Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing and Validation Services

Active

Federal

Response Deadline11/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing and Validation Services supports prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work involves the testing and validation of five units for first article approval to ensure critical application items meet the specific dimensions, material properties, and performance requirements outlined in Drawing 19200 12996821. All verification must be conducted using metrology equipment and CMM, with final deliverables consisting of five approved units and a comprehensive First Article Test report. The project is governed by NAICS code 541380 and requires strict adherence to ISO 9001/AS9100 standards and FAR 52.209-3 compliance. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 4, 2026, to provide these specialized quality assurance services for the Department of Defense.

General Info

Testing and validation of five units per Drawing 19200 12996821 for DLA Weapons.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-7232.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN, SPRING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs testing and validation for prime contractors on DLA Weapons Support critical application items. Tests 5 units for first article approval, verifying dimensions, material properties, and performance against Drawing 19200 12996821 using CMM and metrology equipment. Ensures compliance with FAR 52.209-3 and ISO 9001/AS9100 standards. Delivers a First Article Test (FAT) report and 5 approved units.

Similar Contracts

Same NAICS industry code

Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Structural Steel, Bolting, and Welding InspectionThis subcontract opportunity, managed by the California Department of General Services, involves providing specialized visual and technical inspections for structural steel, welding, and high-strength bolting on CALFIRE facility projects located in San Diego. The selected contractor will be responsible for utilizing welding gauges and torque wrenches to ensure structural integrity, ultimately delivering detailed welding inspection reports and bolting torque logs to the prime contractor. To qualify for this engagement, personnel must hold both AWS Certified Welding Inspector and ICC Structural Steel and Welding Inspector certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 24, 2026.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Concrete and Reinforcing Steel Special InspectionThis subcontract for Concrete and Reinforcing Steel Special Inspection involves providing specialized inspection and testing services for prime contractors on CALFIRE facility projects in San Diego. The scope of work includes inspecting reinforcing steel placement and performing concrete sampling and testing for structures such as barracks, apparatus bays, and generator buildings. Required deliverables include concrete strength reports and reinforcing steel inspection checklists, utilizing tools such as concrete cylinders, slump cones, and compression testing machines. Qualified providers must hold ICC Reinforced Concrete Special Inspector and ACI certifications to ensure compliance with project standards. This opportunity is managed through the California Department of General Services under NAICS code 541380. The response deadline for this solicitation is November 24, 2026.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Soils Inspection and Density TestingThis subcontract, managed by the California Department of General Services, involves providing specialized soils inspection and density testing for a CALFIRE facility project, specifically a fire station replacement in Potrero, California. The selected contractor will perform both field and laboratory testing of soils to support prime contractors during critical phases of construction, including clearing, grading, and foundation preparation. All work must be conducted in accordance with ASTM D 3740 standards, utilizing nuclear gauges and laboratory soil testing apparatus to ensure structural integrity. The contractor is responsible for delivering detailed soil density test reports and comprehensive inspection logs. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 24, 2026. While the project is located in Potrero, the place of performance is listed within San Diego.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Environmental Analytical Testing ServicesThis subcontract for Environmental Analytical Testing Services supports prime contractors working on research and enforcement projects for the California Department of Fish & Wildlife. The scope of work involves performing specialized analytical testing on water and waste samples, specifically focusing on nutrient analysis, turbidity, BOD, COD, and low-level cleanups for pesticides, PAHs, and SVOCs. All work must be performed in accordance with EPA and SW-846 standards, and the provider is required to maintain ELAP certification to deliver Level II and Level IV analytical reports. The project is categorized under NAICS code 541380 and is designated for performance in Amador. Interested parties should note that the response deadline is November 17, 2026. This opportunity is managed through the Cal eProcure system for the state of California.

California Department of Fish & Wildlife

POSTED

about 7 hours ago

DEADLINE

MT&IS POTRERO FIRE STATION- FACILITY REPLACEMENT

Solicitation # RESD-PMDB 2026-12

The California Department of General Services, Real Estate Services Division, is soliciting professional Materials Testing and Inspection Services (MT&IS) for the replacement of the Potrero Fire Station for CALFIRE in San Diego County. The project involves the construction of a standard two-engine fire station on a site of approximately seven acres, with a total estimated construction cost of $23,587,800.00. The selected contractor will be responsible for providing all labor, equipment, and insurance for field laboratory testing, including inspections of soils, reinforcing steel, structural steel, aggregate, and concrete. All services must be managed through CIMB's Procore software and comply with LEED standards and specific technical certifications, such as ASTM D 3740 for soil testing and ASNT CP-189 for nondestructive testing. The contract is estimated to last twenty-four months, with a ten percent retention held for all progress payments. Selection is based on a two-step process involving a written Statement of Qualifications (SOQ) and oral interviews for a short list of typically three firms. Evaluation criteria focus on the experience of the firm, principals, and key personnel, as well as quality control and testing methodologies. Interested firms must submit their SOQ in PDF format via the designated DGS Box.com site by November 23, 2026. Required documentation includes Federal Form SF330, a letter of interest with a Federal Identification Number, and proof of California professional licensing and DIR registration. The final contract will be based on negotiated fixed rates for specific employee classifications and services.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Invitation For Bid P2675010, Analytical Testing Services

Solicitation # P2675010

The California Department of Fish and Wildlife (CDFW) is seeking a contractor to provide analytical testing services to support the Office of Spill Prevention Response Laboratory Program. The primary objective is to establish contingency capacity for water quality and nutrient analysis, ensuring continuity of services during catastrophic instrument failures or providing testing capabilities not available in-house. These services support research studies with partner state agencies and enforcement actions aimed at protecting state waters and identifying pollutants that impact wildlife. The contract has a maximum value of 31,000.00 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible contractors must possess California Environmental Laboratory Accreditation Program (ELAP) certification, particularly for wastewater and hazardous waste testing. Bidders are required to provide a Quality Assurance Manual, Method Detection Limits, and reporting limits for all parameters. The submission process requires several certifications, including the Darfur Contracting Act and the Bidder Declaration Form, with a deadline of November 16, 2026. Preferences and incentives are available for certified Small Businesses and Disabled Veteran Business Enterprises (DVBE), including a 5% bidding preference for small businesses and specific incentive rates for DVBE participation. The contractor is responsible for providing all pre-cleaned sample containers and preservatives, with these costs included in the quoted price.

California Department of Fish & Wildlife

POSTED

about 7 hours ago

DEADLINE

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

First Article Testing and Material Certification ServicesThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, to provide independent testing and validation services for prime contractors. The selected provider will perform First Article Testing on three initial units to verify compliance with Drawing 77445 specifications using specialized metrology and materials testing equipment. The scope of work includes coordinating with a Quality Assurance Representative for point-of-origin inspections and delivering a certified First Article Test Report. The project is a total small business set-aside under NAICS code 541380 and will be performed at Tinker AFB. To be eligible, the contractor must hold ISO/IEC 17025 accreditation. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 12 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Insulation Sleeving (NSN 5970-01-218-2102)This subcontract involves the supply of seven units of specialized insulation sleeving, identified by NSN 5970-01-218-2102, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and falls under NAICS code 326199. The contractor is responsible for ensuring all items meet strict military specifications, including packaging to Packing Level B and palletization according to RP001 DLA Packaging Requirements. Additionally, all shipments must be marked in compliance with MIL-STD-129 to ensure proper delivery and handling of the insulation sleeving.

All Other Plastics Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Aerospace Alloy/Bar Stock SupplyThis subcontract for Aerospace Alloy/Bar Stock Supply involves the provision of raw metal bar stock to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for delivering certified raw material that strictly adheres to the chemical and physical properties specified in TDP Rev A Gen 1. To ensure aerospace standard compliance and full material traceability, the contractor must provide detailed Mill Test Reports with all deliveries. The agreement mandates strict adherence to the Buy American and Balance of Payments Program. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 423510. Interested parties must note the response deadline of November 5, 2026, for this Department of Defense requirement.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Close Tolerance Screw Manufacturing (NAS7802U3)This subcontract involves the manufacture of 116 close tolerance screws, part number NAS7802U3, for the DLA Weapons Support ASC Commodities Division. The fabrication process requires precision CNC machining in strict accordance with National Aerospace Standard 80205 and TDP Rev A Gen 1. Quality control must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the final products must adhere to Buy American requirements and MIL-STD-2073-1E packaging standards. The project is categorized under NAICS code 332722 and will be performed in New Cumberland. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supplier of Hamilton Sundstrand Weight ComponentsThis subcontract involves the supply of 19 units of Hamilton Sundstrand Corporation part number 968C593-3, identified by NSN 6115-01-503-8400, to support prime contractors on DLA Weapons Support ASC projects. The selected supplier is responsible for the delivery of these components to designated locations within the United States and Japan. Strict adherence to technical and security standards is required, including packaging and marking according to ASTM D3951 and MIL-STD-129, and palletization per RP001. Additionally, the contractor must maintain compliance with DLA RA001 and NIST SP 800-171 cybersecurity standards. The procurement is managed under NAICS code 423840 for the Department of Defense.

Industrial Supplies Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Supply of Insulating Flat Washers (NSN 5970-01-310-1298)This subcontract involves the manufacture or sourcing of five insulating flat washers, identified by NSN 5970-01-310-1298, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires strict adherence to RP001 DLA Packaging Requirements and MIL-STD-129 marking and labeling standards, with performance taking place in Keyport. The contractor must ensure full compliance with the Buy American Act and the Berry Amendment regarding sourcing. Additionally, the provider is required to maintain ITAR and EAR compliance and hold certification under the US/Canada Joint Certification Program. Responses for this requirement are due by November 5, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305-01-406-9165)This subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement and delivery of machine screws identified by NSN 5305-01-406-9165. The contractor is responsible for supplying these fasteners to prime contractors for various defense projects, with physical delivery to designated government locations, including Cherry Point. Logistics for the delivery of these parts are handled through the First Destination Transportation program. Strict manufacturing and sourcing compliance is required for this contract. All parts must be produced without the use of additive manufacturing processes and must adhere to the domestic material restrictions set forth by the Berry Amendment and the Buy American Act. The opportunity is categorized under NAICS code 332722, with a response deadline of November 5, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supplier of Self-Locking Plate Nuts (NSN 5310-01-669-4613)This subcontract involves the supply of 155 self-locking plate nuts, identified by NSN 5310-01-669-4613, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing components that strictly adhere to Boeing part number BACN10TL3A6 and DLA Master List requirements. Performance will take place at Tinker AFB, with all units required to be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and demonstrate compliance with NIST SP 800-171. All delivered hardware must undergo sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Special Purpose Branched Electrical Cable Assembly ManufacturerThis subcontract opportunity is for the manufacture of a single special purpose branched electrical cable assembly for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating NSN 5995-01-474-0591 according to drawing 12983322, ensuring full adherence to MIL-STD-129 and MIL-STD-2073-1E standards. Performance will take place in Fort Bragg, with a response deadline of November 5, 2026. Strict compliance requirements are in place, including ISO 9001:2015 certification, CMMC Level 2, and ITAR/EAR regulations. Additionally, all materials used in the fabrication process must comply with the Berry Amendment and the Buy American Act. The final deliverable consists of one completed, inspected, and packaged cable assembly.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Insulator Plate (NSN 5970004232896)This subcontract involves the manufacture and supply of insulator plates under NSN 5970004232896 for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The contractor is responsible for sourcing or producing the hardware components in strict accordance with specified technical requirements, with a critical prohibition against the use of additive manufacturing or 3D printing. The agreement requires the delivery of physical components FOB Destination within a 20-day window. This procurement falls under NAICS code 334413 and is managed through the DLA, with performance associated with FPO 09514.

Semiconductor and Related Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized packaging, preservation, marking, and palletization services to ensure shipments are ready for delivery. All work must be executed in strict accordance with MIL-DTL-197M for packaging, MIL-STD-129 for marking, and MIL-STD-2073-1E for general standards. The contractor is required to use MIL-SPEC anti-corrosive materials and industrial palletization equipment that meets DLA requirement RP001. The final deliverable is a shipment-ready, palletized bearing delivered FOB Destination. This opportunity falls under NAICS code 488510, with a response deadline set for November 16, 2026.

Freight Transportation Arrangement

POSTED

about 12 hours ago

DEADLINE

Annular Ball Bearing Fabrication (PN: 3110-01-034-7002)This subcontract involves the fabrication of one critical application annular ball bearing, part number 3110-01-034-7002, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturing process must strictly adhere to TDP Rev A Gen 1 and Basic QAP 13873 QAP-B02 Revision B. To ensure quality and precision, the contractor is required to utilize precision machining equipment and maintain ISO 9001:2015 certification. The project mandates full compliance with DFARS 252.225-7016 domestic sourcing requirements. The final deliverable is a single finished bearing that meets all specified technical data package requirements. Interested parties must respond by November 16, 2026, under NAICS code 333241.

Food Product Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Specialized Insulation Raw MaterialsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of raw polymers, resins, and specialized insulating materials. These materials must strictly adhere to the chemical and physical properties outlined in Basic Drawing NR 06090 202D211 and are intended for prime contractors fulfilling DLA supply contracts. The provider is responsible for delivering shipments directly to the prime manufacturer and must provide Safety Data Sheets for all hazardous materials. Compliance with the Berry Amendment and the Buy American Act is mandatory for this engagement. The performance of the contract is centered in New Cumberland, Pennsylvania, under NAICS code 325211. Interested parties should note the response deadline of November 5, 2026.

Plastics Material and Resin Manufacturing

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Electrical Cable Assembly Quality Validation and PLT

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) Specialist

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Inspection and Certification Services for Landing Gear Components

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Critical Application Quality Assurance and Certification

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Electrical Component Testing Services (PLT)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Quality Assurance and Sampling Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Production Lot Testing (PLT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Critical Application Quality Assurance & Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Quality Inspection and Certification

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) and Quality Validation

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Production Lot Testing (PLT) Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Inspection Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS