Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) and Qualification Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves independent testing and validation of M98 filter designs and their suppliers to ensure full compliance with military standards for performance, durability, and CBRN filtration efficiency. The work is conducted under the First Article Testing (FAT) and Qualification Services framework, requiring rigorous evaluation of prototype filters to confirm they meet stringent defense requirements before production adoption. Testing protocols will assess filtration effectiveness against chemical, biological, radiological, nuclear, and explosive threats, as well as structural integrity under extreme environmental and operational conditions. This subcontract is managed by the Nswc Indian Head Division under the Department of Defense, with performance centered at the Indian Head, Maryland facility with ZIP code 20640. The work falls under NAICS code 541380, which classifies it as other scientific and technical consulting services, indicating a specialized technical evaluation role rather than manufacturing. The solicitation was posted on July 28, 2026, and is not subject to any set-aside provisions, signifying open competition. Successful bidders must demonstrate expertise in military-grade filtration validation and be prepared to deliver detailed technical reports verifying every performance metric against established military specifications.

General Info

Independent testing of M98 filter designs to verify military CBRN compliance under FAT framework at Indian Head, Maryland.

Agency

Department Of Defense → Nswc Indian Head Division

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Indian Head, MD, 20640, USA

Set-Aside

NONE

Documents

This scope was carved out of N00174-25-RFPREQ-W16-0001.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

M98 Filters

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 28

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Indian Head Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Nswc Indian Head Division

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent testing and validation of M98 filter designs or suppliers to meet military performance, durability, and CBRN filtration efficiency requirements.

Similar Contracts

Same NAICS industry code

Transient Condition & Pressure TestingThis subcontract opportunity, titled Transient Condition and Pressure Testing, is issued by Garney Companies, Inc. for specialized testing services on Charles County Government projects. The selected contractor will be responsible for performing pressure and transient testing for prime contractors, specifically focusing on pump shutdowns and monitoring pressure at the flowmeter vault to ensure levels remain above 15 psig. The final deliverable for this engagement is a comprehensive testing and commissioning report that verifies transient stability. This opportunity is specifically set aside for SBA certified Women-Owned Small Businesses and Disadvantaged Business Enterprises under NAICS code 541380. Interested parties must submit their responses by the deadline of November 9, 2026.

Garney Companies, Inc.

POSTED

about 4 hours ago

DEADLINE

Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.

California Department of General Services

POSTED

about 12 hours ago

DEADLINE

Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.

California Department of General Services

POSTED

about 12 hours ago

DEADLINE

Structural Steel, Bolting, and Welding InspectionThis subcontract opportunity, managed by the California Department of General Services, involves providing specialized visual and technical inspections for structural steel, welding, and high-strength bolting on CALFIRE facility projects located in San Diego. The selected contractor will be responsible for utilizing welding gauges and torque wrenches to ensure structural integrity, ultimately delivering detailed welding inspection reports and bolting torque logs to the prime contractor. To qualify for this engagement, personnel must hold both AWS Certified Welding Inspector and ICC Structural Steel and Welding Inspector certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 24, 2026.

California Department of General Services

POSTED

about 12 hours ago

DEADLINE

Concrete and Reinforcing Steel Special InspectionThis subcontract for Concrete and Reinforcing Steel Special Inspection involves providing specialized inspection and testing services for prime contractors on CALFIRE facility projects in San Diego. The scope of work includes inspecting reinforcing steel placement and performing concrete sampling and testing for structures such as barracks, apparatus bays, and generator buildings. Required deliverables include concrete strength reports and reinforcing steel inspection checklists, utilizing tools such as concrete cylinders, slump cones, and compression testing machines. Qualified providers must hold ICC Reinforced Concrete Special Inspector and ACI certifications to ensure compliance with project standards. This opportunity is managed through the California Department of General Services under NAICS code 541380. The response deadline for this solicitation is November 24, 2026.

California Department of General Services

POSTED

about 12 hours ago

DEADLINE

Soils Inspection and Density TestingThis subcontract, managed by the California Department of General Services, involves providing specialized soils inspection and density testing for a CALFIRE facility project, specifically a fire station replacement in Potrero, California. The selected contractor will perform both field and laboratory testing of soils to support prime contractors during critical phases of construction, including clearing, grading, and foundation preparation. All work must be conducted in accordance with ASTM D 3740 standards, utilizing nuclear gauges and laboratory soil testing apparatus to ensure structural integrity. The contractor is responsible for delivering detailed soil density test reports and comprehensive inspection logs. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 24, 2026. While the project is located in Potrero, the place of performance is listed within San Diego.

California Department of General Services

POSTED

about 12 hours ago

DEADLINE

Environmental Analytical Testing ServicesThis subcontract for Environmental Analytical Testing Services supports prime contractors working on research and enforcement projects for the California Department of Fish & Wildlife. The scope of work involves performing specialized analytical testing on water and waste samples, specifically focusing on nutrient analysis, turbidity, BOD, COD, and low-level cleanups for pesticides, PAHs, and SVOCs. All work must be performed in accordance with EPA and SW-846 standards, and the provider is required to maintain ELAP certification to deliver Level II and Level IV analytical reports. The project is categorized under NAICS code 541380 and is designated for performance in Amador. Interested parties should note that the response deadline is November 17, 2026. This opportunity is managed through the Cal eProcure system for the state of California.

California Department of Fish & Wildlife

POSTED

about 12 hours ago

DEADLINE

MT&IS POTRERO FIRE STATION- FACILITY REPLACEMENT

Solicitation # RESD-PMDB 2026-12

The California Department of General Services, Real Estate Services Division, is soliciting professional Materials Testing and Inspection Services (MT&IS) for the replacement of the Potrero Fire Station for CALFIRE in San Diego County. The project involves the construction of a standard two-engine fire station on a site of approximately seven acres, with a total estimated construction cost of $23,587,800.00. The selected contractor will be responsible for providing all labor, equipment, and insurance for field laboratory testing, including inspections of soils, reinforcing steel, structural steel, aggregate, and concrete. All services must be managed through CIMB's Procore software and comply with LEED standards and specific technical certifications, such as ASTM D 3740 for soil testing and ASNT CP-189 for nondestructive testing. The contract is estimated to last twenty-four months, with a ten percent retention held for all progress payments. Selection is based on a two-step process involving a written Statement of Qualifications (SOQ) and oral interviews for a short list of typically three firms. Evaluation criteria focus on the experience of the firm, principals, and key personnel, as well as quality control and testing methodologies. Interested firms must submit their SOQ in PDF format via the designated DGS Box.com site by November 23, 2026. Required documentation includes Federal Form SF330, a letter of interest with a Federal Identification Number, and proof of California professional licensing and DIR registration. The final contract will be based on negotiated fixed rates for specific employee classifications and services.

California Department of General Services

POSTED

about 12 hours ago

DEADLINE

Invitation For Bid P2675010, Analytical Testing Services

Solicitation # P2675010

The California Department of Fish and Wildlife (CDFW) is seeking a contractor to provide analytical testing services to support the Office of Spill Prevention Response Laboratory Program. The primary objective is to establish contingency capacity for water quality and nutrient analysis, ensuring continuity of services during catastrophic instrument failures or providing testing capabilities not available in-house. These services support research studies with partner state agencies and enforcement actions aimed at protecting state waters and identifying pollutants that impact wildlife. The contract has a maximum value of 31,000.00 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible contractors must possess California Environmental Laboratory Accreditation Program (ELAP) certification, particularly for wastewater and hazardous waste testing. Bidders are required to provide a Quality Assurance Manual, Method Detection Limits, and reporting limits for all parameters. The submission process requires several certifications, including the Darfur Contracting Act and the Bidder Declaration Form, with a deadline of November 16, 2026. Preferences and incentives are available for certified Small Businesses and Disabled Veteran Business Enterprises (DVBE), including a 5% bidding preference for small businesses and specific incentive rates for DVBE participation. The contractor is responsible for providing all pre-cleaned sample containers and preservatives, with these costs included in the quoted price.

California Department of Fish & Wildlife

POSTED

about 12 hours ago

DEADLINE

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

First Article Testing and Material Certification ServicesThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, to provide independent testing and validation services for prime contractors. The selected provider will perform First Article Testing on three initial units to verify compliance with Drawing 77445 specifications using specialized metrology and materials testing equipment. The scope of work includes coordinating with a Quality Assurance Representative for point-of-origin inspections and delivering a certified First Article Test Report. The project is a total small business set-aside under NAICS code 541380 and will be performed at Tinker AFB. To be eligible, the contractor must hold ISO/IEC 17025 accreditation. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Nswc Indian Head Division

Same awarding agency

MIL-Spec Wood Crates IAW ASTM D6880/PPP-B-621

Solicitation # N0017427Q0001

The Naval Surface Warfare Center Indian Head Division is soliciting quotes for a firm-fixed-price purchase order to manufacture 1,200 MIL-Spec wood shipping crates, specifically Container Assembly Drawing 1516298 Rev N, measuring approximately 81 x 8 x 8 inches. This procurement is a total small business set-aside under NAICS code 321920. The crates are intended for use in fleet-deliverable Aviation Critical Safety Items and must adhere to strict technical specifications, including ASTM D6880, PPP-B-621, and MIL-STD-129. Delivery is required by November 27, 2026, to the Indian Head, Maryland facility. Award will be based on the Lowest Price Technically Acceptable (LPTA) basis, evaluating both technical specifications and total price, including shipping. To be deemed technically acceptable, offerors must provide documentation of an active CMMC Level 1 Self-Assessment in the Supplier Performance Risk System (SPRS), though separate contract clauses mandate CMMC Level 2 compliance and NIST SP 800-171 R2 adherence for handling Controlled Unclassified Information. Additionally, contractors must maintain an ISO 9001:2015 quality management system and provide a Final Dimensional Inspection Report for each deliverable. Interested parties must request technical drawings via email by November 9, 2026, and provide ITAR certification prior to the release of these documents. Final quote packages, including the company name, point of contact, UEI, and CAGE code, are due by November 12, 2026, at 8:00 AM EST. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system.

Wood Container and Pallet Manufacturing

POSTED

about 22 hours ago

DEADLINE

MK 38 FY27 Conversion Kits

Solicitation # N00174-26-RFPREQ-W82-0028

The Naval Surface Warfare Center, Indian Head Division intends to negotiate a firm fixed price delivery order under Basic Ordering Agreement N0017423G0001 for the procurement of MK38 Conversion Kits. This sole source action, conducted under the authority of FAR 6.302, is designated for BAE Systems Land and Armaments L.P. due to their unique technical qualifications and facilities. The scope of work includes the manufacture, assembly, inspection, preservation, packaging, and shipping of the kits as detailed in Statement of Work 23-0001-0001-02. This presolicitation, identified by solicitation number N00174-26-RFPREQ-W82-0028, was posted on October 27, 2026, with a response deadline of November 12, 2026. The project falls under NAICS code 332994 and is managed by the Department of Defense. Inquiries regarding this action are directed to the primary point of contact, MacKenzie Martin.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Yorkie Pro cell phone detector

Solicitation # N00174-27-SIMACQ-105-0003

The Naval Surface Warfare Center Indian Head Division intends to award a noncompetitive, firm fixed price contract to Berkeley Varitronics Systems, Inc. for the procurement of Yorkie Pro cell phone detectors. This action is being conducted as a single-source procurement under FAR 13.106-1(b)(1) and 41 U.S.C 1901, as the vendor is identified as the only known source capable of meeting the government's specific requirements. The procurement falls under NAICS code 334220 and FSC code 6350. While this notice is not a request for quotes, interested parties may submit evidence of their capabilities to demonstrate that competition would be advantageous to the government. All responses must be submitted via email to Shannon Wooten by November 10, 2026, at 10:00 AM EST. Vendors must be registered in the System for Award Management to be considered, and the final decision to compete the procurement remains at the sole discretion of the government.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Fingerprint Services

Solicitation # N00174-26-SIMACQ-105-0004

The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to FieldPrint, Inc. for electronic fingerprint collection, processing, and SWFT transmission services. This sole-source acquisition is based on FieldPrint, Inc. being the only known source capable of meeting government requirements as an approved DCSA SWFT Third-Party Service Provider. The requirement is categorized under NAICS code 561611 and Product Service Code R423. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Shannon Wooten by November 16, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is necessary, though the final decision remains at the government's discretion.

Investigation and Personal Background Check Services

POSTED

DEADLINE

Compressor Units and Spares

Solicitation # N00174-26-RFPREQ-M3-0021

The Naval Surface Warfare Center Indian Head Division seeks to acquire Trane Original Equipment Manufacturer compressor units and spare components to serve as direct replacements for existing HVAC systems. This requirement is being pursued as a sole source procurement under the statutory authority of 10 USC 3204(a)(1), with the intent to award a Firm Fixed Price Indefinite Delivery Indefinite Quantity contract to Boland Trane Services, Inc. located in Gaithersburg, Maryland. The procurement is categorized under NAICS code 333415 and PSC code 4120. While this notice is not a request for competitive proposals, the government will consider responses submitted to Bridget Taylor-Shackelford by 3:00 p.m. EST on November 9, 2026. The final determination to compete the requirement remains at the sole discretion of the government.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

MATLAB Software Subscription Renewal

Solicitation # N00174-27-SIMACQ-W1-0006

The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to The MathWorks, Inc. for MATLAB software subscriptions and associated proprietary toolboxes. This sole source procurement is based on the determination that The MathWorks, Inc. is the only source capable of meeting the government requirements as the sole owner and distributor of the software for Department of Defense acquisitions. The requirement is classified under NAICS code 513210 and Product Service Code DA10. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Shannon Wooten by November 04, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is necessary, though the final decision remains at the discretion of the government.

Software Publishers

POSTED

DEADLINE

Squibs for Fire Sprinkler Valves

Solicitation # N00174-27-SIMACQ-102-0051

The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to Cartridge Actuated Devices, Inc. for the procurement of 50 squibs for fire sprinkler valves, specifically part number 074080-3. This action is being pursued as a sole source acquisition under FAR 13.106-1(b)(1) and 41 U.S.C. 1901, as the company is identified as the only source capable of meeting the government's requirements. The procurement falls under NAICS code 325920 for explosives manufacturing and FSC 1377 for cartridge and propellant actuated devices. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Contract Specialist Shannon Wooten by November 03, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is warranted, though the final decision remains at the government's discretion.

Explosives Manufacturing

POSTED

DEADLINE

Gyrus Qual Cert Tracking & Training Platform

Solicitation # N00174-27-SIMACQ-IHD-M-Dept-0004

The Naval Surface Warfare Center Indian Head Division intends to award a noncompetitive, firm fixed price purchase order to Manan LLC dba Gyrus Systems for the Gyrus Qual Cert Tracking and Training Platform. As the original equipment manufacturer and sole owner of the GyrusAim software, Manan LLC is identified as the only source capable of providing the proprietary licenses, source code packages, and certified technical support necessary for implementation within the government's IL5 environment. This procurement is being conducted under FAR 13.106 (b) and 10 U.S.C. 3204 (C) (1) due to the proprietary nature of the required materials. This notice serves as an intent to sole source rather than a request for quotes. Interested parties wishing to challenge this determination must provide clear and convincing evidence of their capability to respond to the requirement by November 3, 2026, at 10:00 AM EST. All responses must be submitted via email to the designated point of contact and the vendor must be registered in the System for Award Management. The government maintains full discretion on whether to proceed with a competitive procurement based on the information received.

Software Publishers

POSTED

DEADLINE

Body, Retainer, and Gasket

Solicitation # N0017426Q1120

The Naval Surface Warfare Center Indian Head Division (NSWC IHD) is soliciting quotes under RFQ N0017426Q1120 for the fabrication, inspection, and delivery of Aviation Critical Safety Items (ACSIs), specifically Delay Bodies, Ignition Device Retainers, and Aluminum Gaskets. This is a total small business set-aside under NAICS code 332710, intended to be awarded as a firm-fixed-price purchase order. The government will utilize a Lowest Price Technically Acceptable (LPTA) basis for award, evaluating quotes based on technical adherence to specifications and total price, including shipping and handling. All deliverables must be delivered FOB Destination to Indian Head, Maryland, with an overall delivery deadline of April 30, 2027. Prospective contractors must meet stringent technical and security requirements. ITAR certification is required to receive technical drawings, which must be requested by October 23, 2026. A critical requirement for technical acceptability is the verification of a current CMMC Level 2 status (Conditional or Final) recorded in the Supplier Performance Risk System (SPRS). Additionally, the contractor must maintain a quality management system adhering to ASQ/ANSI/ISO 9001:2015 and submit an Inspection Test Plan and First Article Testing (FAT) samples where applicable. Quote packages, including the company name, point of contact, UEI, and CAGE code, must be submitted via email by November 6, 2026, at 10:00 AM EST.

POSTED

DEADLINE

Loaded Cartridge Assembly (MC91) for MK 5 Mod ) Explosive Bolt

Solicitation # N00174-26-RFPREQ-W71-0030

The Naval Surface Warfare Center, Indian Head Division is conducting market research to identify capable vendors for the Loaded Cartridge Assembly, DODIC MC91. This assembly must be compatible with the MK 5 MOD 0 Explosive Bolt used in the AN/BST-1 Buoy system and adhere to specific technical criteria including WS6061 and WS6052. The anticipated procurement involves 100 production units plus all necessary destructive test samples, encompassing the full process of manufacture, nondestructive testing, packaging, and delivery. Interested vendors must demonstrate the ability to establish a manufacturing line and complete all deliveries within one year of award. Requirements include possessing necessary ATF licensing, specific storage capacities, and advanced inspection capabilities such as helium leak rate and real-time radiography testing. To access the restricted Technical Data Package, applicants must provide an approved DD Form 2345, a signed NDA, and an active CAGE code. Responses to the detailed capability questionnaire must be submitted in PDF format by November 9, 2026.

Explosives Manufacturing

POSTED

DEADLINE

Precision Instrument CalibrationThis small business set-aside subcontract, titled Precision Instrument Calibration, seeks a qualified provider to perform calibration services for tools, instruments, and test equipment supporting prime contractors at the Naval Surface Warfare Center Indian Head Division. The selected provider must adhere to NAVSEA Calibration System Requirements H-246-H001 and utilize certified calibration standards to ensure all measurement and diagnostic equipment is accurately serviced. Additionally, the contractor must meet the Commercial Service Provider definitions outlined in OPNAVINST3960.16 and is responsible for delivering both certified equipment and official calibration certificates. Managed by the Department of Defense under NAICS code 541380, the opportunity was posted on October 6, 2026, with a response deadline of November 5, 2026. This procurement is specifically designated as a total set-aside for small businesses to support critical technical operations within the Nswc Indian Head Division.

Testing Laboratories and Services

POSTED

DEADLINE

Chemical Conversion and Anodizing ServicesThis small business set-aside subcontract for the Department of Defense involves providing chemical conversion and anodizing services for the Naval Surface Warfare Center Indian Head Division. The selected contractor will perform surface treatments on machined hardware for prime contractors, utilizing anodizing tanks and chemical baths to apply coatings in strict accordance with MIL-A-8625 standards. Due to the nature of the work, which involves handling controlled unclassified information drawings and parts, the contractor must maintain CMMC Level 2 certification. The project falls under NAICS code 332813, with a response deadline of November 5, 2026. The final deliverable for this engagement is the provision of properly surface-treated hardware components.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacturer’s Certification & Compliance Documentation (CDRLs)

Portsmouth Naval Shipyard Gf

POSTED

CLOSED

Radiation Safety Compliance and Shielding Design

W6QK Acc-Apg Adelphi

POSTED

CLOSED

Material Certification and Traceability Services

POSTED

CLOSED

NIST-Traceable Calibration Services for Radiation Detection Instruments

245-NETWORK Contract Office 5 (36C245)

POSTED

CLOSED

Mechanical Testing and Validation (Tensile, Fatigue)

NASA Shared Services Center

POSTED

CLOSED

High-Resolution X-ray Computed Tomography (XCT) for Defect Characterization

NASA Shared Services Center

POSTED

CLOSED

Counterfeit Electronic Parts Detection and Supply Chain Screening

Ok DLA Aviation At Oklahoma City

POSTED

CLOSED

Aerospace Quality Assurance and Inspection Services

Ok DLA Aviation At Oklahoma City

POSTED

CLOSED

Analytical Testing and Quality Control for Clinical Study Medication

246-NETWORK Contracting Office 6 (36C246)

POSTED

CLOSED

Hydrostatic Testing (6-Year Testing)

Network Contract Office 23 (36C263)

POSTED

CLOSED

Fire Extinguisher Annual Inspections and Monthly Visual Checks

Network Contract Office 23 (36C263)

POSTED

CLOSED

Environmental and Safety Compliance Testing

FA8205 Aflcmc Wauk

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS