Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Radiation Safety Compliance and Shielding Design

Active

Federal

Response Deadline08/03/2026, 02:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of engineering services to ensure radiation safety compliance for cabinet X-ray systems in accordance with 21 CFR 1020.40, focusing on shielding design, interlock validation, and comprehensive documentation. The work is critical to maintaining regulatory standards for radiation-emitting equipment, ensuring that safety controls are effectively engineered and verified to protect users and the surrounding environment from unnecessary exposure. Deliverables must align precisely with federal guidelines, emphasizing technical accuracy and thorough recordkeeping to demonstrate adherence during inspections or audits. The contract is a subcontract issued under the Department of Defense through the agency W6QK Acc-Apg Adelphi, with performance required at Aberdeen Proving Ground, Maryland, ZIP 21005. It is classified under NAICS code 541380, which corresponds to other scientific and technical consulting services. The solicitation was posted on July 28, 2026, with a firm deadline for responses on August 3, 2026, at 2:30 PM Eastern Time. The effort is not subject to any specific small business set-aside and is intended for qualified engineering contractors capable of delivering precise, compliant solutions for defense-related radiation-emitting systems.

General Info

Engineering services for radiation safety compliance of cabinet X-ray systems at Aberdeen Proving Ground under DoD contract.

Agency

Department Of Defense → W6QK Acc-Apg AdelphiView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Aberdeen Proving Ground, MD, 21005, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 02:30:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg Adelphi

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Apg Adelphi

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide engineering services for radiation safety compliance, including shielding design, interlock validation, and documentation per 21 CFR 1020.40 for cabinet X-ray systems.

Similar Contracts

Same NAICS industry code

Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.

LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Counterfeit Electronic Parts Detection & Avoidance System ImplementationThe contract seeks the implementation of a comprehensive counterfeit electronic parts prevention and detection system to safeguard the integrity of components used in defense applications. This includes establishing rigorous supplier screening procedures, standardized part authentication protocols, and validated testing methods to identify and isolate suspect components. The contractor will be responsible for developing and maintaining a system that ensures consistent detection of counterfeit electronics throughout the supply chain, with clear processes for documenting, reporting, and escalating suspected nonconforming items. The system must comply with industry best practices and government standards for electronic parts reliability and supply chain security. This is a small business set-aside subcontract under NAICS code 541380, issued by the ASC Commodities Division of the Department of Defense, with proposals due by August 11, 2026. The work is intended to support defense logistics and procurement integrity, requiring the contractor to demonstrate technical capability in electronics verification, supply chain risk management, and reporting mechanisms. Although the place of performance and point of contact details are unspecified, the effort is expected to involve coordination across multiple tiers of suppliers and internal quality assurance teams to ensure end-to-end visibility and accountability. All activities must align with federal acquisition regulations governing small business participation and defense supply chain resilience.

ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Thermal Protection System (TPS) Fiber Trade Studies and Material EvaluationThe contract involves conducting comprehensive trade studies to evaluate fiber diameter, carbon-to-phenolic composition, and performance characteristics of materials intended for NASA’s Thermal Protection System applications. These studies require detailed analysis of material behavior under extreme thermal and mechanical conditions to identify optimal formulations and configurations that enhance performance, durability, and mass efficiency for spacecraft re-entry environments. The work includes collecting, interpreting, and correlating experimental data to support decision-making in material selection and system design, with a strong emphasis on technical documentation and reporting to communicate findings clearly to NASA engineering teams. The subcontract is open for response until August 1, 2026, and falls under NAICS code 541380, indicating it is for other scientific and technical consulting services. It is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, and while the place of performance is unspecified, the work is expected to support critical TPS development efforts for future space missions. The solicitation, posted on July 29, 2026, targets specialized contractors with expertise in advanced composite materials and aerospace thermal protection systems, requiring precision in testing methodologies and analytical rigor to meet NASA’s high-performance standards.

NASA Shared Services Center

POSTED

about 7 hours ago

DEADLINE

C26651005 Water Testing and Analyses ServicesThe contractor is required to provide comprehensive water testing and analytical services for public use water systems located in State Parks across western Sonoma County, California, including the collection and analysis of water samples gathered by park staff. This contract involves furnishing all necessary materials, tools, equipment, and labor to perform the testing, with results to be submitted to both the State Water Resources Control Board’s Division of Drinking Water and the California Department of Parks and Recreation. The scope of work is a re-bid of solicitation C25651009 and follows the detailed specifications outlined in the standard state agreement. The contract is being issued under solicitation number 0000039900, posted on July 28, 2026, with responses due by August 11, 2026, and the work will be performed within Sonoma County. Point of contact for inquiries is Leigia Nunez, reachable via phone or email provided.

California Department of Parks & Recreation

POSTED

about 21 hours ago

DEADLINE

Materials Testing & Laboratory ServicesThe contract titled Materials Testing & Laboratory Services requires the performance of comprehensive soil, concrete, and construction materials testing to verify adherence to ASTM, AASHTO, and specific project standards. The work is intended to support infrastructure and construction projects under the oversight of the River Valley Regional Commission in Georgia, ensuring that all materials meet required engineering and safety benchmarks before and during implementation. Testing services must be conducted with precision and documented thoroughly to maintain regulatory compliance and project integrity. This is a subcontract opportunity with a NAICS code of 541380, indicating it falls under the category of architectural, engineering, and related services. The solicitation was posted on July 28, 2026, with a firm deadline for responses set for August 31, 2026, at 3:00 PM. The place of performance and specific location details are not provided, suggesting the scope may cover multiple sites within Georgia under the commission's jurisdiction. Bidders are expected to demonstrate established laboratory capabilities, qualified personnel, and familiarity with federal and state testing protocols to be considered for award.

River Valley Regional Commission

POSTED

DEADLINE

in about 1 month

Mill Certification and Quality Documentation ServicesThe contract requires the provision of comprehensive mill certification and quality documentation services for pipe shipments, with a focus on generating and submitting accurate mill test reports, heat numbers, tally sheets, and stenciled compliance data. All documentation must fully comply with the technical specifications of API 5L, ASTM A53B, and API 5LI standards to ensure the integrity and traceability of materials used in pipeline systems. The contractor is responsible for maintaining rigorous quality control throughout the documentation process to meet industry regulatory requirements and client expectations. This subcontract opportunity is issued by Philadelphia Gas Works under the NAICS code 541380 and is open for response until August 5, 2026. While no set-aside designation is specified, the work is expected to be performed in support of Pennsylvania-based infrastructure projects, though the exact performance location is not detailed. Bidders must ensure their capabilities align with the demanding documentation and compliance requirements and submit their proposals through the designated portal by the stated deadline.

Philadelphia Gas Works

POSTED

DEADLINE

Bid Solicitation for Annual Calibration of instruments and equipment for all branches of MS Forensic LaboratoryThe Mississippi Department of Public Safety is soliciting bids for the annual calibration of instruments and equipment across all branches of the MS Forensic Laboratory, under solicitation number 1711-27-R-IFBD-00001. The solicitation, posted on July 28, 2026, requires responders to submit proposals by August 27, 2026, to ensure timely and accurate calibration services vital to forensic operations statewide. The work must be performed throughout Mississippi, with all equipment calibrated in accordance with industry standards to maintain the integrity of forensic analysis and legal proceedings. The contract is managed by the State and Local Government (SLED) agency, with Sonya Williams serving as the primary point of contact for all inquiries, reachable via phone or email. While no specific set-aside or NAICS code is indicated, the procurement is open to qualified vendors capable of delivering comprehensive, reliable, and compliant calibration services across multiple laboratory sites. Proposals must demonstrate technical capability, experience with forensic instrumentation, and adherence to quality assurance protocols to meet the rigorous demands of the state’s forensic infrastructure.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

Quality Inspection and Conformance TestingThe contract requires execution of first-article or batch inspections to verify quality attributes classified as critical, major, and minor, using MIL-STD-1916 or ASQ Z1.4 sampling plans to ensure conformance with specified standards. Inspections must be carried out in accordance with zero-based sampling methodologies to validate product quality at predefined stages of production, ensuring compliance with rigorous defense-related quality expectations. The work is scoped under the NAICS code 541380, indicating a focus on engineering services, and is structured as a subcontract under the Department of Defense’s Land Supply Chain organization. Performance is designated to occur at Chambersburg, Pennsylvania, with a 17201-4150 zip code, and the submission window for proposals closes on August 10, 2026, following a July 28, 2026 posting date. The solicitation is managed through the DIBBS system under reference SPE7L126T884E, and bidders must be prepared to meet DoD quality assurance protocols with no flexibility in sampling methodology. While no set-aside type is specified, the contract requires full compliance with federal and military standards for inspection processes, and all work must be completed in alignment with the precise technical requirements outlined in the referenced standards.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The contract mandates radiological screening of filter assemblies to detect and notify the government if any radioactive materials exceed established regulatory thresholds, in full compliance with FAR 52.223-7 and MIL-STD-129 requirements. All filter assemblies must be inspected and documented to ensure they do not contain radioactive contaminants above permissible levels, and any discovery of such materials must trigger an immediate and formal notification to the contracting agency. This requirement applies to all deliveries under the subcontract and is intended to safeguard personnel, facilities, and the supply chain from potential radiological hazards. The solicitation is classified as a subcontract under NAICS code 541380 and is administered by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at San Diego, CA 92135-5000. Responses must be submitted by August 10, 2026, with the opportunity posted on July 28, 2026. While no set-aside designation is specified, the contract emphasizes strict adherence to federal and military standards for radiological safety, and all participants must be prepared to provide verifiable testing documentation and notification protocols as part of compliance. No point of contact is listed, and all inquiries must be directed through the official DIBBS platform linked in the solicitation.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Radioactive Materials Notification & Labeling (If Applicable)The contract requires the detection and reporting of radioactive materials that exceed established regulatory thresholds, ensuring compliance with federal safety and handling standards. All identified materials must be properly labeled according to MIL-STD-129 specifications, which dictate uniform marking and identification protocols for military shipments and inventory. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance obligated at Cherry Point, North Carolina, under the NAICS code 541380, indicating it pertains to other scientific and technical consulting services. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, with no set-aside provisions specified, meaning it is open to all eligible contractors regardless of business size or status.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

First Article Testing (FAT) and Qualification ServicesThe contract calls for comprehensive First Article Testing (FAT) and qualification services in accordance with MIL-STD requirements, encompassing dimensional, material, and functional evaluations to ensure compliance with specified performance and quality standards. All testing outcomes must be documented and reported in full alignment with DI-NDTI-80809B guidelines, ensuring standardized, auditable deliverables that meet Department of Defense expectations for reliability and traceability. This subcontract supports critical sourcing efforts under the NAICS code 541380 and is managed by the LAND SUPPLIER OPNS VEHICLE SPT activity within the Department of Defense. Responses are due by August 7, 2026, and the solicitation remains open for qualified subcontractors ready to execute precise, standards-driven testing services. The work is expected to be performed wherever the supplier is located, with no specific geographic restrictions noted. This opportunity is not designated for any particular set-aside classification and is accessible to all eligible vendors capable of fulfilling the technical and reporting obligations outlined in the requirements.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)If nonmetallic tubing is utilized in any system that contains licensed radioactive materials, immediate written notification must be provided to the Contracting Officer in accordance with 10 CFR regulations and established radiological safety protocols. This requirement is mandatory and applies to all subcontract activities under this agreement, ensuring compliance with federal standards for handling radioactive substances and maintaining the integrity of radiological controls. The obligation to notify is triggered solely by the presence of nonmetallic tubing in such systems, regardless of the volume or concentration of radioactive material involved. This contract is a subcontract under the Department of Defense’s MARITIME SUPPLY CHAIN ESOC BUYS, classified under NAICS code 541380, and was posted on July 28, 2026, with responses due by August 10, 2026. While specific performance location and point of contact details are not provided, the requirement is enforceable across all relevant work sites where contracted activities involve systems containing licensed radioactive materials. Failure to provide timely notification may result in noncompliance penalties and operational restrictions under federal radiological safety guidelines.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg Adelphi

Same awarding agency

Notice of Intent to Solicit From Only One Source for a Siemens Altair Enterprise Suite Software Scription.The U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, has issued a notice of intent to solicit exclusively from a single source for a Siemens Altair Enterprise Suite Software Subscription under solicitation number W911QX26QA145. This action is classified as a combined solicitation with no set-aside, indicating that the procurement is open to any eligible vendor, though intended for direct award to Siemens due to the proprietary and specialized nature of the software. The solicitation is posted with a response deadline of August 1, 2026, at 2:00 PM Eastern Time, and the associated NAICS code 513210 confirms the procurement as a software publisher activity. Performance will occur at Aberdeen Proving Ground, Maryland, with the contract administered from the office located in Adelphi, Maryland. Primary point of contact for inquiries is Nyshaun Greene, reachable via phone at 520-691-5586 or email at nyshaun.s.greene.civ@army.mil, with Eddie Lee Kemp listed as a secondary contact. Interested parties must refer to the attached solicitation document for detailed technical and contractual requirements, as the notice itself does not contain full procurement specifications. The official solicitation page can be accessed through the SAM.gov link provided. This procurement is essential for sustaining critical engineering and simulation capabilities within the Department of Defense's operational and testing environments.

Software Publishers

POSTED

about 7 hours ago

DEADLINE

Supply of Compatible Rotors and BottlesThe contract solicits the supply of 8x2000 mL swinging bucket rotor sets and 1L round bucket sets specifically designed for use with centrifuge systems, ensuring full compatibility and operational reliability in high-throughput laboratory environments. This subcontract is focused on delivering precision-engineered rotor and bottle components that meet stringent performance and safety standards required for sensitive centrifugation tasks, likely supporting research or production activities within a defense-related laboratory setting. The opportunity is posted under NAICS code 339113 for medical equipment and supplies manufacturing, indicating the specialized nature of the components being procured. The place of performance is designated as Adelphi, Maryland, with a response deadline of August 12, 2026, and the contracting organization is the Department of Defense through the W6QK Acc-Apg Adelphi office. The order will be executed under a subcontract arrangement, suggesting that the awarded vendor will fulfill requirements on behalf of a prime contractor or directly support a DoD facility engaged in advanced scientific operations. All delivered items must conform to unspoken but critical technical specifications for use in federally funded, high-security, or regulated laboratory conditions.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Centrifuge Installation & Start-Up ServicesThe contract entails on-site installation, calibration, operational validation, and comprehensive user training for the BIOS 16 centrifuge system at the designated location in Adelphi, Maryland, with a zip code of 20783. All services must be performed physically at the site to ensure proper integration, functionality, and safe operation of the equipment by end users. The work is classified under NAICS code 541715, indicating it falls within scientific research and development services, and is issued as a subcontract under the Department of Defense, specifically through the W6QK Acc-Apg Adelphi office. Prospective providers must submit their proposals by the deadline of August 12, 2026, at 7:00 PM, with the solicitation posted on July 28, 2026, allowing approximately two weeks for response preparation. No set-aside provisions are specified, meaning the opportunity is open to any eligible subcontractor regardless of business size or demographic classification.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Laboratory Centrifuge Supply (OEM Equipment)The contract entails the supply of a Thermo Scientific BIOS 16 large-capacity bioprocessing centrifuge, a high-performance laboratory instrument designed for demanding bioprocessing applications. The equipment must be delivered as original equipment manufacturer product, fully assembled and operational, accompanied by comprehensive technical documentation including operation manuals, maintenance guides, and calibration certificates. A standard warranty covering parts and labor for a minimum of one year from date of acceptance is required, ensuring reliability and support during initial deployment. The centrifuge is intended for use at the Department of Defense facility in Adelphi, Maryland, with delivery and installation to be completed in accordance with federal procurement standards. This is a subcontract under the NAICS code 334516, classified under laboratory equipment manufacturing, and is managed by the W6QK Acc-Apg Adelphi office. The solicitation was posted on July 28, 2026, with responses due by August 12, 2026, at 7:00 PM Eastern Time. All submissions must comply with applicable federal regulations governing defense contracting, including documentation of manufacturing origin, quality assurance protocols, and supply chain transparency. The equipment must meet or exceed specified performance thresholds for speed, capacity, temperature control, and safety features to ensure interoperability with existing bioprocessing workflows within the facility.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

On-Site Installation, Training, and CommissioningThe contract requires comprehensive on-site services for an X-ray system at Aberdeen Proving Ground in Maryland, including installation, calibration, mandatory safety inspections, operator training, and formal system handover. All work must be performed at the designated location, with the contractor responsible for ensuring the system is fully functional, safe, and operational upon completion. The task is classified as a subcontract under NAICS code 811212 and is linked to the Department of Defense through the W6QK Acc-Apg Adelphi agency. The solicitation was posted on July 28, 2026, with a strict response deadline of August 3, 2026, at 2:30 PM Eastern Time, leaving limited time for proposal submission. No set-aside preferences or organizational type restrictions are specified, making it open to qualified subcontractors capable of delivering technical service and training in a secure federal environment.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Software Development for Image Processing and AnalysisThe contract requires the development and integration of specialized software for real-time X-ray image processing with capabilities including frame averaging, contrast adjustment, and on-screen measurement tools to enhance image clarity and analytical utility. The system must support output in multiple formats—.jpg, .tif, and .avi—to ensure compatibility with various reporting, archival, and playback systems used in military and defense applications. The software must be optimized for performance in live imaging environments, with emphasis on speed, accuracy, and reliability under operational conditions. This subcontract is issued under the NAICS code 541512 for computer systems design services and is tied to the Department of Defense through the Aberdeen Proving Ground location in Maryland. The solicitation was posted on July 28, 2026, with a response deadline of August 3, 2026, indicating a tight turnaround for proposal submission. Performance of the work is expected to occur at or in support of the designated federal facility, and the contract's focus on real-time medical and industrial imaging suggests it will support critical defense, diagnostic, or equipment inspection functions. All deliverables must meet strict technical requirements without specified set-aside provisions, making it open to eligible contractors regardless of business size or status.

Computer Systems Design Services

POSTED

DEADLINE

X-ray Tube and Detector Supply (Critical Component Supplier)The contract requires the supply of high-resolution micro-focus X-ray tubes and digital detectors with precise technical specifications, including a focal spot size of no more than 10 micrometers, an anode voltage of 80 kilovolts, and the ability to support real-time imaging. These components are critical for advanced imaging applications and must meet stringent performance standards to ensure accuracy, reliability, and operational readiness in demanding environments. The equipment is intended for use by the U.S. Department of Defense at Aberdeen Proving Ground, Maryland, with delivery and performance expected to align with the defense sector’s technical and logistical requirements. The solicitation is categorized as a subcontract under NAICS code 334516, which pertains to the manufacturing of medical, dental, and laboratory equipment. The response deadline is August 3, 2026, at 2:30 PM, with the opportunity posted on July 28, 2026, providing a limited window for qualified suppliers to submit proposals. The contracting activity is under the W6QK Acc-Apg Adelphi office, indicating direct involvement with military research or testing facilities at Aberdeen Proving Ground. Suppliers must be prepared to demonstrate compliance with technical specifications, manufacturing quality controls, and the capability to deliver these specialized components within the required timeline without delays.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Micro-Focus X-ray System Integration and DeliveryThe contract calls for the supply, configuration, and delivery of a turnkey real-time micro-focus X-ray inspection system designed specifically for printed circuit board (PCB) analysis, with a focus on evaluating BGA solder joints and internal voids. The system must be fully operational at Aberdeen Proving Ground in Adelphi, MD, within 18 weeks of contract award, requiring rapid integration, commissioning, and validation to meet strict deployment timelines. The solution must be self-contained, fully configured, and ready for immediate use without requiring extensive on-site customization or additional components. This is a subcontract under the Department of Defense, with performance located at the Aberdeen Proving Ground facility identified by zip code 21005. The North American Industry Classification System code 334517 indicates the work pertains to the manufacturing of search, detection, navigation, guidance, and controlling instruments. The solicitation was posted on July 28, 2026, with responses due by August 3, 2026, at 2:30 PM Eastern Time. The contracting activity is designated as W6QK Acc-Apg Adelphi, and the deliverable must meet rigorous military-grade standards for reliability, precision, and operational readiness in a defense-centric environment.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

100% Small Business Set-Aside for Single Girder underhung Bridge CraneThis solicitation, identified as W911QX26QA123, is a Sources Sought Notice issued by the Department of Defense through the W6QK Acc-Apg Adelphi office for the procurement of a Single Girder underhung Bridge Crane system to be installed at Aberdeen Proving Ground, Maryland. The system must be a 5-ton capacity crane with a 20-foot span and 50-foot length, constructed to CMAA Class C specifications, and equipped with a 460-volt, three-phase motor, a chain hoist (as updated in Amendment 0002), variable frequency drive controls, an electronic overload limiter, and a ten-foot factory lift. The crane will include a radio control system with two transmitters and one receiver, a backup push button pendant, and a freestanding runway system supported by eight columns with a clearance of nine feet six inches underneath. The contract requires the removal and disposal of an existing three-ton bridge crane, full installation with rigging and freight, on-site operator training for shop personnel, and compliance with OSHA load testing standards per 1910.179(K)(2), 1926.251(A)(4), and 1926.251(C)(15)(II). Warranty requirements include a one-year coverage for all equipment, a two-year warranty on installation labor, and a five-year warranty specifically for the hoist motor. Responses are due by August 7, 2026, and must be submitted via email to the primary point of contact, Keturah Moore, with attachments excluding .zip and .exe file formats. The action is a 100% Small Business Set-Aside under NAICS code 333923, requiring respondents to certify their business size as small or large based on the 1,250-employee threshold, and small businesses must disclose any additional socioeconomic status such as HUBZone, 8(a), SDVOSB, WOSB, or EDWOSB. Offerors must also demonstrate technical capability to meet all specifications and provide descriptions of past performance on comparable projects. This notice serves only as a market research tool and is not a formal request for proposals, bids, or quotations.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

Sources Sought for Real-Time Micro-Focus X-ray Inspection SystemThe U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, is seeking information on potential sources capable of providing a real-time micro-focus X-ray inspection system. This solicitation, identified by number W911QX26QA189, is posted on July 28, 2026, with responses due by August 3, 2026, at 2:30 PM Eastern Time. The requirement falls under NAICS code 334517, which pertains to other electromagnetic and optical instrument manufacturing, and the system is intended for use at Aberdeen Proving Ground in Maryland. No set-aside designation is specified, meaning the opportunity is open to all eligible vendors. The point of contact for questions and submissions is Stency Steephan, with Shanna Dellinger as the secondary contact, both reachable via their official Army email addresses. Additional details regarding technical specifications and evaluation criteria are contained in the attached “Salient Characteristics” and “Sources Sought” documents, which are essential for respondents to review prior to submission.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

NOTICE OF INTENT TO SOLE SOURCE – The Government requires a five (5) year (base year plus four (4) option years) service maintenance contract for maintenance of a Government-owned Location of Miss and Hit (LOMAH) system.The Government is seeking a five-year service maintenance contract for the ongoing upkeep of a Government-owned Location of Miss and Hit (LOMAH) system, consisting of a base year and four optional years, to ensure system reliability and operational readiness. This solicitation is being issued as a sole source action under solicitation number W911QX26QA147, with no set-aside requirements, and is classified under NAICS code 811210 for repair and maintenance services. The contract will be managed by the Office of W6QK Acc-Apg Adelphi within the Department of Defense, with performance required at Aberdeen Proving Ground, Maryland. Responses must be submitted by July 31, 2026, with the opportunity posted on July 28, 2026. Primary point of contact is Douglas Dennard, reachable at 520-672-9560 or douglas.c.dennard.civ@army.mil, with Morgan Evans as secondary contact at 520-672-9578 or morgan.j.evans6.civ@army.mil. All necessary documentation, including the Combination Synopsis-Solicitation, Adelphi Instructions, and Provision and Clauses Final, are referenced and must be reviewed by prospective offerors.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Thermo Scientific BIOS 16 Centrifuge, Components, and Start-Up ServiceThe U.S. Army is soliciting proposals for the Thermo Scientific BIOS 16 Centrifuge, including its components and start-up service under solicitation number W911QX26QA169, which was posted on July 28, 2026, with a response deadline of August 12, 2026, at 7:00 PM Eastern Time. This is a presolicitation notice indicating the government’s intention to procure a single unit of the centrifuge along with necessary accessories and professional installation and startup services, with no set-aside reserved for small businesses or other categories. The contract falls under NAICS code 334516 for Laboratory Analytical Instrument Manufacturing and is being managed by the Department of Defense through the W6QK Acc-Apg Adelphi office located in Adelphi, Maryland, with all performance expected to occur at the same location. The primary point of contact for questions and further information is Benjamin Krein, reachable at benjamin.l.krein.civ@army.mil, with Joseph M. Dellinger listed as the secondary point of contact. Interested vendors should prepare detailed responses outlining their capability to supply the specified equipment, ensure full compatibility with existing laboratory systems, and provide comprehensive start-up support including on-site installation, calibration, training, and validation documentation. All submissions must comply with federal procurement guidelines and meet technical requirements established by the Army’s laboratory operations team in Adelphi, Maryland. Further details and submission instructions are available through the provided SAM.gov link.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE