Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) for Hardware Component

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the ASC Commodities Division of the Department of Defense involves the production and delivery of First Article Testing for hardware components. The contractor is responsible for producing three initial units of Lot/Item 5306 / 1217912 and validating these parts against the Technical Data Package using specialized inspection equipment. The final deliverables include the test units and a comprehensive test and acceptance report, which must be delivered to Tinker AFB within 180 calendar days for government testing. This project falls under NAICS code 541380 and is intended to support prime contractors on DLA Aviation projects.

General Info

Contract for producing three hardware test units and reports for DoD within 180 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-33EQ.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GOVERNMENT FIRST ARTIC

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 21

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs and delivers initial test units for prime contractors on DLA Aviation, ASC Commodities Division projects. Produces 3 initial units of Lot/Item 5306 / 1217912 and validates parts against the Technical Data Package (TDP) using specialized inspection equipment. Delivers test units to Tinker AFB within 180 calendar days for government testing. Delivers the units and the resulting test/acceptance report.

Similar Contracts

Same NAICS industry code

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking qualified small and disadvantaged business firms to serve as a subconsultant for the City of Hemet's Oakland and Santa Fe Waterline Replacement project (CIP 5661). The scope of work involves providing geotechnical and materials inspection and testing services over an anticipated 210 construction working days. Key responsibilities include material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottoms, as well as initial sampling, acceptance testing, and the preparation of a certification memorandum signed by a professional engineer to identify any non-complying materials. The project is funded in whole or in part by a U.S. Environmental Protection Agency Community Grant, requiring strict adherence to federal flow-down provisions, including 40 CFR Part 33 Disadvantaged Business Enterprise (DBE) requirements, 2 CFR Section 200.321 procurement standards, and the Build America, Buy America Act. Selected firms must comply with California prevailing wage laws under Labor Code Section 1770 and maintain registration with the Department of Industrial Relations. Subcontract award is contingent upon the selection of Albert A. Webb Associates by the City of Hemet. Interested firms must provide a technical proposal, fee proposal, and proof of small or disadvantaged business certifications.

Albert A. Webb Associates

POSTED

about 8 hours ago

DEADLINE

Chemical Analytical Services For Wastewater Treatment Plant and Environmental Monitoring Programs

Solicitation # 26-0369

The Greater Vancouver Regional District, operating under Metro Vancouver in the Province of British Columbia, is seeking chemical analytical services to support its wastewater treatment plant and environmental monitoring programs. This solicitation, identified by number 26-0369, is designed to secure professional laboratory services necessary for maintaining environmental compliance and operational efficiency within the region. Interested parties must submit their responses by the deadline of October 19, 2026. The contract is focused on performance within British Columbia, and further details regarding the submission process can be accessed through the BC Bid portal.

Greater Vancouver Regional District (Metro Vancouver)

POSTED

about 14 hours ago

DEADLINE

Pipeline Pressure Testing and InspectionThis subcontract for Pipeline Pressure Testing and Inspection involves performing hydrostatic pressure testing and weld and joint inspections for prime contractors on Jackson County Port Authority projects. The scope of work includes executing pressure testing and leak detection on 24 inch and 42 inch lines, as well as certifying the interconnection using high pressure pumps, gauges, and testing manifolds. The selected provider must be a certified pipeline inspector or hold a Professional Engineering certification to deliver the required pressure test reports and certification of interconnection integrity. This opportunity is managed by the Mississippi Department of Finance and Administration under NAICS code 541380, with a response deadline of September 22, 2026.

POSTED

about 18 hours ago

DEADLINE

in about 6 hours

First Article Testing (FAT) and Ballistic CertificationThis subcontract opportunity is for the performance of Contractor-Performed First Article Testing and ballistic certification to support prime contractors on DLA Land and Maritime supply contracts. The scope of work involves executing ballistic impact testing and quality assurance validation utilizing a specialized testing range and standardized munitions. All deliverables must include formal test reports adhering to the DI-NDTI-80809B format and FAR 52.209-3 standards. The project is designated as a Total Small Business Set-Aside under NAICS code 541380 and is managed by the Department of Defense Land Supply Chain agency. Performance will take place in Tracy, California. Interested parties must submit their responses by October 21, 2026.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

First Article Testing (FAT) and Certification ServicesThis subcontract, titled First Article Testing (FAT) and Certification Services, is issued by the Department of Defense Land Supply Chain as a total small business set-aside under NAICS code 541380. The contractor is responsible for performing ballistic and quality testing for prime contractors on DLA and Army armor projects to certify manufacturing processes. This involves conducting Contractor First Article Tests in accordance with FAR 52.209-3 using standardized projectiles and ballistic testing ranges. The contractor must document all findings using the DI-NDTI-80809B report format. Final deliverables include signed FAT reports and system of record receiving reports, which are to be submitted via WAWF or DD Form 250. The solicitation was posted on September 21, 2026, with a response deadline of October 20, 2026.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Asbestos Bulk Material Sampling and TestingThe Asbestos Bulk Material Sampling and Testing subcontract involves performing environmental sampling and laboratory analysis of bulk materials for prime contractors working on Worcester Housing Authority projects. The scope of work requires conducting sampling of various building components and utilizing certified laboratory facilities to identify asbestos content. Upon completion of the testing, the contractor is responsible for delivering detailed environmental reports that outline the specific results of the bulk material analysis. This subcontracting opportunity is managed by the Worcester Housing Authority Purchasing department in Massachusetts. Interested parties must submit their responses by the deadline of October 6, 2026. The contract is classified under NAICS code 541380 and involves performance at the Worcester location. All technical procedures must be executed using appropriate environmental sampling tools to ensure accurate identification and reporting of hazardous materials.

WHAPURCHASING - Purchasing

POSTED

about 19 hours ago

DEADLINE

IFB#26-24 Asbestos Testing Services

Solicitation # BD-27-1610-WHAPU-WHAPU-133447

The Worcester Housing Authority is soliciting sealed bids under IFB#26-24 (Solicitation Number BD-27-1610-WHAPU-WHAPU-133447) for asbestos testing on bulk material sampling services. This open market procurement, categorized under NAICS code 541380, seeks a provider to deliver environmental reporting services specifically for the testing of bulk materials for asbestos. The solicitation was posted on September 21, 2026, with a response deadline and bid opening scheduled for October 6, 2026, at 2:00 PM. Administrative oversight for this contract is managed by Purchaser David Coderre and Michelle Ngo within the Purchasing Department located at 660 Lincoln Street, Worcester, Massachusetts. Electronic quotes are permitted for submission. While the scope of work focuses on bulk material sampling, specific performance periods and contract values are not defined in the provided documentation. All billing and shipping activities are directed to the Purchasing Department in Worcester.

WHAPURCHASING - Purchasing

POSTED

about 19 hours ago

DEADLINE

PFAS Analysis and Method Development for Food Contact Materials (FCMs)This subcontract involves providing high-precision analytical chemistry testing for prime contractors supporting Food Standards Agency projects. The primary focus is the development and validation of analytical methods to measure PFAS in food matrices and food contact materials utilizing LC-MS/MS mass spectrometry. The scope of work includes conducting monitoring programs and migration studies in accordance with international standards. The successful provider will be responsible for delivering technical reports, occurrence and migration data sets, and fully validated analytical methods. This opportunity falls under NAICS code 541380 and has a response deadline of October 19, 2026.

Food Standards Agency

POSTED

about 21 hours ago

DEADLINE

Backflow Prevention Assembly Testing and Certification ServicesThis subcontract for Backflow Prevention Assembly Testing and Certification Services involves performing field testing, inspection, and certification of backflow prevention assemblies for prime contractors on Lynn Water and Sewer Commission projects. The selected provider will test RPZ valves and Double Check Valve Assemblies using calibrated gauges and kits to ensure compliance with municipal and state water quality standards. The contractor must hold a Certified Backflow Tester certification and is responsible for delivering certified test reports for each device along with a final program compliance report. The work is located in Lynn, Massachusetts, with a response deadline of October 20, 2026.

LWS1 - Lynn Water & Sewer

POSTED

about 23 hours ago

DEADLINE

Cross Connection Control & Back Flow Device Testing Program

Solicitation # BD-27-1784-LWS1-LWS1-133622

The Lynn Water and Sewer commission in Massachusetts is seeking bids for the Cross Connection Control and Back Flow Device Testing Program under solicitation number BD-27-1784-LWS1-LWS1-133622. This project will be performed at their location on Parkland Avenue in Lynn, Massachusetts. Interested parties can obtain the full specifications electronically through the official commission website. The deadline for bid submissions is October 20, 2026, by 11:00 a.m. April Lozzi serves as the primary point of contact for this procurement process.

LWS1 - Lynn Water & Sewer

POSTED

about 23 hours ago

DEADLINE

Geotechnical, Materials Testing & Environmental ServicesThis subcontract for Geotechnical, Materials Testing and Environmental Services supports the City of Conroe Engineering Department by providing essential soil analysis, material testing, and environmental assessments for prime contractors. The scope of work includes conducting geotechnical boring and soil stability testing using specialized drilling rigs and laboratory equipment to ensure structural integrity and compliance. Qualified providers must hold Professional Geologist or Professional Engineer certifications to deliver the required geotechnical reports and material test certifications. This opportunity is categorized under NAICS code 541380, with a response deadline of October 8, 2026.

POSTED

about 23 hours ago

DEADLINE

Chemical and Mechanical Testing ServicesThis subcontract for Chemical and Mechanical Testing Services supports prime contractors on US Army Watervliet Arsenal spindle projects. The selected provider will perform chemical analysis and mechanical testing using spectrometers and tensile or hardness testing equipment, ensuring all work complies with MIL-C-13931, drawing specifications, QAP-APPX-WVA paragraph 4.6, and relevant Data Item Descriptions. The primary deliverable for this effort is a certified Contractor Test Report for each batch. Managed by the Department of Defense under agency W6QK Acc Wva, this opportunity is a total Small Business Set Aside under NAICS code 541380. The work is to be performed in Watervliet, New York. Interested parties must submit their responses by October 5, 2026.

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Specialized Cable Assembly FabricationThis subcontract involves the manufacture and supply of six units of specialized cable assemblies, identified by NSN 5995-01-186-6439, for prime contractors supporting the DLA ASC Commodities Division. The fabrication process must strictly adhere to Basic Drawing 49956 996703 Rev H, Reference Drawing 49956 996747 Rev U, and Reference Drawing 49956 G125720 Rev A, all following TDP Rev B Gen 2 standards. The project falls under NAICS code 334419 and requires packaging in accordance with ASTM D3951. Performance of the contract will take place in Greensboro, North Carolina, with a response deadline of September 28, 2026.

Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Fluid Pressure Filter Elements (NSN 1650050410462)This subcontract with the ASC Commodities Division of the Department of Defense involves the supply of 94 fluid pressure filter elements, specifically PTI Technologies Inc. part number 37820 (NSN 1650050410462). These components are designated as Critical Application Items and are intended for prime contractors on ASC projects. Performance will take place at Tinker AFB. The supplier must maintain ISO 9001:2015 certification and ensure full compliance with the Buy American Act. All items must be packaged according to ASTM D3951 standards and shipments must be marked in accordance with MIL-STD-129. The solicitation was posted on September 21, 2026, with a response deadline of September 28, 2026.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Shoulder Screws (NSN 5305012259639)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture or sourcing of 582 shoulder screws meeting NSN 5305-01-225-9639 technical specifications. The contractor is responsible for ensuring all items are packaged according to ASTM D3951, marked and labeled per MIL-STD-129, and palletized in accordance with RP001 DLA Packaging Requirements. The total quantity of 582 units must be delivered to the designated agency location in New Cumberland, Pennsylvania, within 169 days of the contract award. This requirement falls under NAICS code 332722 and is intended to support prime contractors on DLA supply contracts.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Cable Assembly (NSN 6150-01-701-2165)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture or sourcing of 60 cable assemblies under NSN 6150-01-701-2165. The contractor must ensure all units are marked according to MIL-STD-129 and palletized per RP001, with a strict prohibition on the use of mercury compounds in preservation or packaging. Performance will take place in New Cumberland, Pennsylvania. The agreement requires full compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. This opportunity falls under NAICS code 335999 and was posted on September 21, 2026, with a response deadline of September 28, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Flow Control Thermostats (NSN 6685010502086)This subcontract involves the supply of 59 flow control thermostats, identified by NSN 6685010502086, for prime contractors working on projects for the Department of Defense ASC Commodities Division. The contractor is responsible for sourcing or manufacturing the units and ensuring all items are marked and labeled in accordance with MIL-STD-129. The scope of work includes palletization following RP001 DLA Packaging Requirements to ensure delivery meets all established DLA standards. Performance for this contract is located in Anniston, Alabama, under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Aerospace Shear Bolt SupplyThis subcontract with the Department of Defense ASC Commodities Division involves the supply of 14 specialized shear bolts, identified by NSN 5306004850818. The contractor is responsible for manufacturing or sourcing bolts that strictly adhere to Reference Drawing 200415485 Cage 98752 Rev E and part standard NAS674V34H, while ensuring compliance with non-government standards NAS673 through NAS678 Revision B. A certification of conformance to the referenced Cage 98752 drawing is required for delivery. The project is categorized under NAICS code 332722 and is designated for performance at Robins Air Force Base. The solicitation was posted on September 21, 2026, with a response deadline of September 28, 2026. This agreement serves to provide critical aerospace hardware to prime contractors supporting DLA supply contracts.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Military Specification Packaging and FreightThis subcontract for Military Specification Packaging and Freight supports the Department of Defense ASC Commodities Division by providing specialized packaging, marking, and palletization services for prime contractors. The scope of work involves processing machine bolts according to ASTM D3951 and MIL-STD-129 standards, utilizing MIL-SPEC materials and industrial labeling equipment to ensure compliance with RP001 DLA Packaging Requirements. The project is categorized under NAICS code 561910 and requires the final delivery of packaged goods to DLA Distribution Cherry Point, North Carolina. Interested parties must respond by September 28, 2026, to meet the requirements of this specialized logistics and packaging operation.

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Machine Bolt SupplyThis subcontract involves the supply of machine bolts for prime contractors supporting the Department of Defense ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing bolts that meet all technical specifications, conducting quality inspections at the point of origin, and adhering to strict packaging, marking, and palletization standards including ASTM D3951, MIL-STD-129, and RP001. The contract falls under NAICS code 332721 and requires the final delivery of all completed machine bolts to DLA Distribution in Cherry Point, North Carolina. Interested parties must respond by September 28, 2026, to be considered for this requirement.

Precision Turned Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Military-Standard Packaging and LabelingThis subcontract for the Department of Defense ASC Commodities Division involves providing specialized packaging, marking, and labeling services for retaining rings to support DLA supply contracts. The contractor is responsible for ensuring all items are packaged according to ASTM D3951 and marked in compliance with MIL-STD-129 using approved labeling systems to ensure shipments are ready for government acceptance. The project is categorized under NAICS code 561910 and will be performed at Fort Stewart, Georgia. Interested parties must respond by September 28, 2026, to meet the requirements of this military-standard packaging and labeling initiative.

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Retaining Rings (MS16631-1102)This subcontract involves the manufacture and supply of precision retaining rings, specifically part number MS16631-1102, for prime contractors supporting DLA supply contracts. The work is performed under the authority of the Department of Defense through the ASC Commodities Division, with the place of performance located at Fort Stewart. The fabrication process must strictly adhere to Basic Specification MS16631F, MIL-DTL-21248F, and ASME B18.23.3, while following the DLA Master List of Technical and Quality Requirements RA001. Quality control measures are required to verify all parts against ASME and MIL-STD tolerances using specialized equipment. The opportunity falls under NAICS code 332510 and was posted on September 21, 2026, with a response deadline of September 28, 2026.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Key Washers (NSN 5310015896743)This subcontract involves the manufacture or sourcing of 96 specialized key washers conforming to NSN 5310015896743 for prime contractors supporting DLA Aviation supply contracts. The selected provider must ensure all items are prepared for shipment under the First Destination Transportation program and maintain strict compliance with FAR 52.223-3 and FAR 52.223-23 standards. Managed by the ASC Commodities Division of the Department of Defense under NAICS code 332722, the contract is based in San Diego, California. The solicitation was posted on September 21, 2026, with a response deadline of September 28, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Annular Ball Bearings (NSN 3110-00-822-5325)This subcontract involves the supply of 37 high-precision annular ball bearings, identified by NSN 3110-00-822-5325, for prime contractors working on ASC Commodities Division projects under the Department of Defense. The performance location for this contract is Tinker AFB. The supplier is responsible for manufacturing or sourcing bearings that strictly comply with TDP Rev A Gen 1 and Basic Drawing NR X4F3 AMSCBDOC, ensuring they match approved part numbers from Timken, Schatz Bearing, or MPB Corp. Due to the nature of the components, all deliverables must adhere to Critical Application Item quality standards.

Ball and Roller Bearing Manufacturing

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS