Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) for Special Purpose Cable Assembly

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves performing First Article Testing for prime contractors supporting DLA Weapons Support ASC projects to validate manufacturing processes. The scope of work requires the execution of test protocols for specific cable assemblies according to drawings 13499 310-0044, 13499 621-8047, and 13499 608-5412. The final deliverables consist of one FAT unit and a corresponding test report. To be eligible, contractors must hold ISO 9001:2015, CMMC Level 2, and JCP certifications to ensure authorized access to technical data. The project falls under NAICS code 541380 and will be performed in Fallon, Nevada. Responses are due by November 9, 2026.

General Info

First Article Testing for DLA cable assemblies in Fallon, Nevada, due November 9, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

FALLON, NV, 89496-0001, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-7907.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPECIAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 1

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors on DLA Weapons Support ASC projects to validate manufacturing processes. Executes test protocols for cable assemblies per drawings 13499 310-0044, 13499 621-8047, and 13499 608-5412. Requires ISO 9001:2015, CMMC Level 2, and JCP certification for access to technical data. Delivers one FAT unit and associated test report.

Similar Contracts

Same NAICS industry code

Aerospace Component First Article Testing (FAT)This subcontract involves performing First Article Testing for prime contractors supporting the Department of Defense DLA Weapons Support Aviation Supply Chain. The selected provider will be responsible for verifying the structural integrity, conductivity, insulation, and dimensions of components against Drawing NR 19207 12546439. These evaluations must be conducted using insulation resistance and continuity testers, culminating in the delivery of a formal First Article Test Report. Performance will take place in Fort Bliss, Texas, under NAICS code 541380. To be eligible, contractors must maintain ISO 9001 or SAE AS9003 certification and ensure full compliance with ITAR and EAR regulations for the handling of technical data. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

AS9003/ISO 9001 Quality Certification and Inspection ServicesThis subcontract for the Department of Defense DLA Weapons Support ASC Commodities Division involves providing third-party quality auditing and inspection services for prime contractors. The scope of work focuses on verifying manufacturer inspection systems for compliance with SAE AS9003 or ISO 9001 standards, validating critical application status, and ensuring adherence to mercury-free and DFARS 252.225-7016 domestic content requirements. Technical execution requires the use of micrometers and CMM for tolerance verification, with final deliverables consisting of detailed inspection reports and Certificates of Conformance. The project is categorized under NAICS code 541380 and is performed at a location in FPO 96629. Interested parties should note the response deadline of November 9, 2026, following the posting date of November 1, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electronics Testing and Inspection ServicesThis subcontract for Electronics Testing and Inspection Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will perform independent verification and testing, specifically executing sampling plans according to MIL-STD-1916 or ASQ H1331 and ensuring lead finish compliance per IPC/JEDEC J-STD-609. All work must be conducted using calibrated Measuring and Test Equipment in accordance with requirement RT001, with final deliverables consisting of detailed inspection reports and certifications of conformance. To be eligible for this engagement, the contractor must hold ISO 9001:2015 and JCP certifications to ensure proper technical data access. The opportunity falls under NAICS code 541380 and was posted on November 1, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Quality Inspection and FAT ValidationThe Aerospace Quality Inspection and FAT Validation subcontract involves providing independent dimensional inspection and First Article Test validation for prime contractors supporting DLA Weapons Support projects. Based in Jacksonville, the scope of work requires the use of CMM equipment to ensure strict compliance with RT001 M&TE and ASME Y14.5 standards, culminating in the delivery of certified inspection reports and validation documentation. To be eligible for this engagement, contractors must hold CMMC Level 2 and JCP certifications to ensure secure access to Technical Data Packages. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt agency.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article and Production Lot Testing Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing and Certification Services

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Electrical Component Testing and CertificationThis subcontract for Electrical Component Testing and Certification involves performing specialized testing and validation for electrical cable assemblies supporting prime contractors on DLA Weapons Support projects. The scope of work includes conducting First Article Tests and quality assurance sampling in accordance with MIL-STD-1916 or ASQ H1331 standards. The selected provider must utilize calibrated electrical measurement equipment and maintain ISO 9001:2015 certification to ensure all deliverables, including test reports and certifications of compliance for first articles and production lots, meet strict quality requirements. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the work is to be performed at Robins Air Force Base. Interested parties must note the response deadline of November 9, 2026. The project falls under NAICS code 541380, focusing on the technical certification and validation of critical electrical components.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract involves providing specialized testing and quality validation services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on executing First Article Testing protocols and performing sampling and inspections in accordance with MIL-STD-1916 or ASQ H1331 standards. These tasks require the use of precision metrology and environmental stress testing to ensure technical compliance. The selected provider must hold US/Canada Joint Certification Program certification and possess the capability to coordinate operations at Robins Air Force Base. Final deliverables for the contract include the submission of detailed FAT reports and the delivery of two validated units.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Production Lot Testing (PLT) and Quality AssuranceThis subcontract involves providing specialized Production Lot Testing and Quality Assurance services for prime contractors under Defense Logistics Agency supply contracts. The scope of work focuses on executing Production Lot Test requirements and coordinating Government Testing in accordance with procurement note E04 and Army Drawing 18876 Table I. The selected provider will utilize signal generators, RF testing equipment, and various measurement tools to verify the performance of attenuators, ultimately delivering comprehensive test reports and production lot certifications. Managed by the DLA Weapons Support Active Devices Division within the Department of Defense, the work is performed in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense under the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for validating manufactured brackets for prime contractors by verifying dimensions, material properties, and tolerances against the technical data package. These evaluations must be conducted using precision measurement tools and material analysis equipment, with the final deliverables being a FAT Certification and a detailed Test Report. Performance will take place at Tinker AFB, and the service provider must maintain ISO/IEC 17025 certification or an equivalent DLA-approved standard. The opportunity was posted on November 1, 2026, with a response deadline of November 9, 2026. The work falls under NAICS code 541380.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) for Wiring HarnessesThis subcontract involves performing first article testing and validation for wiring harnesses on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work requires verifying assemblies against Drawing NR 19200 13020436 and associated technical data packages through the application of insulation resistance and electrical continuity testing. The final deliverables for this project include validated units and comprehensive FAT test reports. To be eligible, contractors must maintain ISO 9001:2015 certification and possess the necessary capabilities to handle hardware restricted by ITAR and EAR regulations. This opportunity falls under NAICS code 541380 and was posted on November 1, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Radio Frequency Cable Assembly (P/N 530R057G01)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the supply of five Radio Frequency Cable Assemblies, part number 530R057G01. The project is a total small business set-aside under NAICS code 334418, with performance taking place at Tinker AFB. The supplier must ensure all units adhere to RQ017 Physical Identification and Bare Item Marking requirements and meet Critical Application Item quality standards. Additionally, the contractor is required to maintain CMMC Level 2 cybersecurity certification to ensure the security of sensitive information throughout the procurement process.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Refrigerant Gas Mixture Cylinder SupplierThis subcontract opportunity is for the supply of specialized compressed gas cylinders containing refrigerant gas mixtures to support prime contractors for the DLA Weapons Support ASC Commodities Division. The required cylinders must be DOT-4BW400 compliant and delivered in original manufacturer unit packaging, as repackaging is strictly prohibited. To be eligible, the supplier must be an Original Equipment Manufacturer or an authorized distributor capable of delivering one compressed gas cylinder that meets all specified DOT standards. The project is associated with NAICS code 325180 and will be performed at Camp Pendleton, California. Interested parties must submit their responses by November 9, 2026, following the posting date of November 1, 2026. This procurement is managed under the Department of Defense to ensure the delivery of critical refrigerant materials for weapons support operations.

Other Basic Inorganic Chemical Manufacturing

POSTED

DEADLINE

MIL-SPEC Electronic Packaging ServicesThis subcontract for MIL-SPEC Electronic Packaging Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized packaging and marking for electronic assemblies to ensure they are shipment-ready and fully compliant with military specifications. Key technical requirements include packaging ESD-sensitive electronics according to MIL-STD-2073-1E and utilizing DOD-qualified materials per MIL-PRF-81705 for both Electrostatic Discharge and Electromagnetic Interference protection. Shipments must be marked in accordance with MIL-STD-129, specifically including Special Marking Code 39. The performance of these services will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 488510.

Freight Transportation Arrangement

POSTED

DEADLINE

Shipboard Alarm Panel Supplier (NSN 6320-01-452-9514)This subcontract involves the supply of four Shipboard Alarm Panel assemblies for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or procuring commercial off-the-shelf items that strictly adhere to NSN 6320-01-452-9514 specifications. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 334220. The contract mandates strict compliance with NAVSEA 5100-003D to ensure materials are mercury-free and meet Critical Application Item standards. Additionally, the provider must adhere to the Buy American Act and DFARS 252.204-7012 regulations. The response deadline for this requirement is November 9, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Manufacture of Front Mounting Plates (NSN 6680-00-075-4106)This subcontract involves the precision machining and supply of 10 front mounting plates, identified by part number 397531 and NSN 6680-00-075-4106, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must strictly adhere to MIL-STD-1916 or ASQ H1331 sampling methods and MIL-STD-129 marking requirements. Notably, the use of additive manufacturing is prohibited for this project. The finished and packaged units are to be delivered FOB Origin to Dulles, Virginia. This requirement falls under NAICS code 332710 and is managed by the Department of Defense.

POSTED

DEADLINE

Military-Spec Packaging and Logistics ProviderThis subcontract with the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, involves providing specialized military packaging, marking, and palletization services for prime contractors delivering to DLA Distribution San Diego. The scope of work requires the processing of 456 machine bolts for FOB Origin shipment, ensuring all hardware is handled using military-grade materials and barcoding equipment. Compliance is mandatory across several strict military standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N for packaging and marking, as well as DLA requirement RP001 for palletization. The performance of these services will take place in San Diego, California, under NAICS code 493110.

General Warehousing and Storage

POSTED

DEADLINE

Precision Machine Bolt ManufacturerThis subcontract involves the manufacture of 456 machine bolts under NSN 5306001801934 for prime contractors supporting DLA Weapons Support ASC projects. The selected manufacturer must fabricate the bolts to exact NSN specifications and the most current part standard revisions, with a strict prohibition on the use of additive manufacturing. The contractor is required to utilize precision machining equipment and maintain a quality system that complies with either SAE AS9003 or ISO 9001 standards. Performance will take place in San Diego, California, with the final deliverable being 456 finished machine bolts that meet all established technical specifications.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Plate Insulator (NSN 5970123149332) SupplierThis subcontract involves the manufacture or procurement of one Plate Insulator, identified by NSN 5970123149332, to support prime contractors for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for ensuring strict adherence to quality assurance standards per MIL-STD-1916 or ASQ H1331, while following MIL-STD-129 for marking and labeling and ASTM D3951 and DLA Master List requirements for packaging. Additionally, the provider must guarantee full compliance with the Buy American Act. The completed item is to be delivered FOB Origin to the Letterkenny Army Depot in Chambersburg. This opportunity falls under NAICS code 335932 and was posted on November 1, 2026, with a response deadline of November 9, 2026.

Noncurrent-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Supplier of Turnlock Fastener Receptacle (NSN 5325013393252)This subcontract, issued by the DLA Weapons Support ASC Commodities Division, requires the procurement or manufacture of one Turnlock Fastener Receptacle, specifically Sikorsky Aircraft Corporation part number SS7001-8A. The delivery is designated as FOB Origin and must be performed in San Diego, California. The supplier must ensure strict adherence to MIL-STD-129 marking and RP001 palletization standards, with quality assurance verified through Sikorsky QAP 1201 or ASQ H1331/MIL-STD-1916. Additionally, the contractor is required to maintain Buy American Act compliance and provide a CMMC Level 2 self-assessment.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Critical Application Annular Ball BearingsThis subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement and delivery of one SKF USA INC. 52676 P/N 608-2Z Annular Ball Bearing. The item is designated for a critical application and must strictly adhere to the provided Technical Data Package requirements. As part of the delivery, the contractor must submit a formal declaration regarding the domestic or foreign origin of the material to ensure compliance with established sourcing restrictions. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423830, with the place of performance located at Tinker AFB. Interested parties must respond by November 9, 2026, to provide the specified bearing and the necessary origin documentation to support prime contractors delivering on DLA supply contracts.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Set Screws (NSN 5305-01-363-6074)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the procurement or manufacture of a specific set screw identified by NSN 5305-01-363-6074. The contractor is responsible for delivering one unit that meets all technical specifications, ensuring it is packaged according to RP001 DLA Packaging Requirements and marked and labeled in compliance with MIL-STD 129. Additionally, a Safety Data Sheet must be submitted for any hazardous materials associated with the item. The performance of this contract will take place in Fort Campbell, Kentucky, under NAICS code 332722. Interested parties must submit their responses by November 9, 2026, to support prime contractors fulfilling DLA supply contracts.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supply of Self-Locking Hexagonal Nuts (NSN 5310015683086)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing for Electrical Insulation Tape

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) for Aerospace Electrical Components

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Source Inspection and Certification for Critical Safety Items (CSI)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Battery Testing and Certification Services

Defense Logistics Agency

POSTED

DEADLINE

in about 23 hours

Critical Component Inspection and Certification

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Bearing Testing and Inspection Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

TEST, CHARACTERISTICS, D001-D003, 5D

Solicitation # SP450027F0659

Defense Logistics Agency

POSTED

DEADLINE

Wastewater Sample Testing and Analysis

Jacobs Creek Job Corps Ccc

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS