Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing for Electrical Insulation Tape

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing technical validation and First Article Testing for electrical insulation tape to support prime contractors under DLA Weapons Support ASC supply contracts. The selected provider must utilize a certified quality control department or a qualified laboratory to verify material properties, thickness between 0.015 and 0.020 inches, and sample dimensions in strict accordance with MIL-I-22444C using precision measurement equipment. The scope of work culminates in the delivery of a formal FAT Report and a certification of compliance. Performance will take place at Kirtland AFB, and the opportunity is categorized under NAICS code 541380 for the Department of Defense.

General Info

Technical validation and First Article Testing for electrical insulation tape at Kirtland AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

KIRTLAND AFB, NM, 87117-0001, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-2464.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TAPE, INSULATION, ELE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 1

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical validation and First Article Testing (FAT) for prime contractors on DLA Weapons Support ASC supply contracts. Verifies sample dimensions, thickness (0.015" - 0.020"), and material properties against MIL-I-22444C using precision laboratory measurement equipment. Requires a qualified laboratory or certified quality control department. Delivers a FAT Report and certification of compliance.

Similar Contracts

Same NAICS industry code

Aerospace Component First Article Testing (FAT)This subcontract involves performing First Article Testing for prime contractors supporting the Department of Defense DLA Weapons Support Aviation Supply Chain. The selected provider will be responsible for verifying the structural integrity, conductivity, insulation, and dimensions of components against Drawing NR 19207 12546439. These evaluations must be conducted using insulation resistance and continuity testers, culminating in the delivery of a formal First Article Test Report. Performance will take place in Fort Bliss, Texas, under NAICS code 541380. To be eligible, contractors must maintain ISO 9001 or SAE AS9003 certification and ensure full compliance with ITAR and EAR regulations for the handling of technical data. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

AS9003/ISO 9001 Quality Certification and Inspection ServicesThis subcontract for the Department of Defense DLA Weapons Support ASC Commodities Division involves providing third-party quality auditing and inspection services for prime contractors. The scope of work focuses on verifying manufacturer inspection systems for compliance with SAE AS9003 or ISO 9001 standards, validating critical application status, and ensuring adherence to mercury-free and DFARS 252.225-7016 domestic content requirements. Technical execution requires the use of micrometers and CMM for tolerance verification, with final deliverables consisting of detailed inspection reports and Certificates of Conformance. The project is categorized under NAICS code 541380 and is performed at a location in FPO 96629. Interested parties should note the response deadline of November 9, 2026, following the posting date of November 1, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electronics Testing and Inspection ServicesThis subcontract for Electronics Testing and Inspection Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will perform independent verification and testing, specifically executing sampling plans according to MIL-STD-1916 or ASQ H1331 and ensuring lead finish compliance per IPC/JEDEC J-STD-609. All work must be conducted using calibrated Measuring and Test Equipment in accordance with requirement RT001, with final deliverables consisting of detailed inspection reports and certifications of conformance. To be eligible for this engagement, the contractor must hold ISO 9001:2015 and JCP certifications to ensure proper technical data access. The opportunity falls under NAICS code 541380 and was posted on November 1, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Quality Inspection and FAT ValidationThe Aerospace Quality Inspection and FAT Validation subcontract involves providing independent dimensional inspection and First Article Test validation for prime contractors supporting DLA Weapons Support projects. Based in Jacksonville, the scope of work requires the use of CMM equipment to ensure strict compliance with RT001 M&TE and ASME Y14.5 standards, culminating in the delivery of certified inspection reports and validation documentation. To be eligible for this engagement, contractors must hold CMMC Level 2 and JCP certifications to ensure secure access to Technical Data Packages. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt agency.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article and Production Lot Testing Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing and Certification Services

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Electrical Component Testing and CertificationThis subcontract for Electrical Component Testing and Certification involves performing specialized testing and validation for electrical cable assemblies supporting prime contractors on DLA Weapons Support projects. The scope of work includes conducting First Article Tests and quality assurance sampling in accordance with MIL-STD-1916 or ASQ H1331 standards. The selected provider must utilize calibrated electrical measurement equipment and maintain ISO 9001:2015 certification to ensure all deliverables, including test reports and certifications of compliance for first articles and production lots, meet strict quality requirements. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the work is to be performed at Robins Air Force Base. Interested parties must note the response deadline of November 9, 2026. The project falls under NAICS code 541380, focusing on the technical certification and validation of critical electrical components.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) for Special Purpose Cable AssemblyThis subcontract involves performing First Article Testing for prime contractors supporting DLA Weapons Support ASC projects to validate manufacturing processes. The scope of work requires the execution of test protocols for specific cable assemblies according to drawings 13499 310-0044, 13499 621-8047, and 13499 608-5412. The final deliverables consist of one FAT unit and a corresponding test report. To be eligible, contractors must hold ISO 9001:2015, CMMC Level 2, and JCP certifications to ensure authorized access to technical data. The project falls under NAICS code 541380 and will be performed in Fallon, Nevada. Responses are due by November 9, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract involves providing specialized testing and quality validation services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on executing First Article Testing protocols and performing sampling and inspections in accordance with MIL-STD-1916 or ASQ H1331 standards. These tasks require the use of precision metrology and environmental stress testing to ensure technical compliance. The selected provider must hold US/Canada Joint Certification Program certification and possess the capability to coordinate operations at Robins Air Force Base. Final deliverables for the contract include the submission of detailed FAT reports and the delivery of two validated units.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Production Lot Testing (PLT) and Quality AssuranceThis subcontract involves providing specialized Production Lot Testing and Quality Assurance services for prime contractors under Defense Logistics Agency supply contracts. The scope of work focuses on executing Production Lot Test requirements and coordinating Government Testing in accordance with procurement note E04 and Army Drawing 18876 Table I. The selected provider will utilize signal generators, RF testing equipment, and various measurement tools to verify the performance of attenuators, ultimately delivering comprehensive test reports and production lot certifications. Managed by the DLA Weapons Support Active Devices Division within the Department of Defense, the work is performed in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense under the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for validating manufactured brackets for prime contractors by verifying dimensions, material properties, and tolerances against the technical data package. These evaluations must be conducted using precision measurement tools and material analysis equipment, with the final deliverables being a FAT Certification and a detailed Test Report. Performance will take place at Tinker AFB, and the service provider must maintain ISO/IEC 17025 certification or an equivalent DLA-approved standard. The opportunity was posted on November 1, 2026, with a response deadline of November 9, 2026. The work falls under NAICS code 541380.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Lens Caps (NSN 5855-01-689-4160)This subcontract involves the manufacture or sourcing of 42 lens caps identified by NSN 5855016894160 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div. The contractor is required to adhere to the DLA Master List of Technical and Quality Requirements (RA001) and must follow fixed-price line item invoicing and receiving report standards to support prime contractors delivering DLA supply contracts. The project falls under NAICS code 326199 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on November 1, 2026, with a response deadline of November 9, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Precision Electronic Component SupplierThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves the supply of precision electronic tools and measuring instruments. The supplier is responsible for providing OEM-certified electronic components and hand tools to a prime integrator, specifically focusing on the components needed to populate NSN 5180-01-501-2408. All items must be packaged according to individual NSN requirements to ensure compliance with delivery standards. The contract falls under NAICS code 333998 and specifies New Cumberland as the place of performance. Interested parties should note the response deadline of November 9, 2026, following the posting date of November 1, 2026. This agreement ensures that prime contractors delivering DLA supply contracts receive exact part numbers and certified equipment necessary for their operations.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Electronic System Tool Kit SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, requires the provision of two complete Electronic System Tool Kits for prime contractors. The supplier is responsible for assembling components for NSN 5180-01-501-2408 into single boxes, ensuring each kit includes cushioning and a detailed contents list. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333249. Strict adherence to military standards is required, specifically MIL-STD-2073-1 Appendix D and MIL-STD-129 for packaging and marking. Additionally, the contractor must guarantee that no mercury or mercury compounds are utilized during the preservation process. The solicitation was posted on November 1, 2026, with a response deadline of November 9, 2026.

Other Industrial Machinery Manufacturing

POSTED

DEADLINE

Defense-Compliant Packaging and Marking ServicesThis subcontract for Defense-Compliant Packaging and Marking Services involves providing specialized preparation for prime contractors supporting the DLA Weapons Support ASC. The scope of work requires the packaging of 404 Ring Spacers in accordance with ASTM D3951 and marking items per MIL-STD-129 and DLA requirement RP001. All operations must utilize military-grade materials and labeling equipment that comply with the DLA Master List of Technical and Quality Requirements. The project is managed under NAICS code 561910 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. Final deliverables are to be prepared for shipment to DLA Distribution San Diego, with the place of performance located in San Diego, California. The solicitation period opens on November 1, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

DEADLINE

Manufacturing of Nylon Ring Spacers (NSN 5365-00-171-8725)This subcontract involves the manufacture and delivery of 404 Nylon Ring Spacers under NSN 5365-00-171-8725 for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The spacers must be fabricated using MIL-P-17091, ASTM STD D4066, or L-P-410 6/6 Nylon, with quality assurance sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. Finished products are to be delivered FOB Origin to DLA Distribution San Diego. To be eligible for this contract, the provider must maintain CMMC Level 2 Certification and ensure full compliance with DFARS 252.204-7012. The project falls under NAICS code 326199, with a response deadline set for November 9, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Supply of Sleeve Bushings for USS GERALD R FORD (CVN 78)This subcontract involves the procurement and delivery of a specific sleeve bushing for prime contractors supporting the Department of Defense for the USS GERALD R FORD (CVN 78). The requirement is for one unit of NSN 5365-01-669-7734, which must match Dynac Corp part number 11-058-JA or part number 17493 ITEM 81. All items must be packaged according to MIL-STD-2073-1E standards and delivered to the designated location in FPO 09523. Managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 332999. The solicitation was posted on November 1, 2026, with a response deadline of November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Aerospace-Grade Metals/Textiles for Buckle Assembly

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Manufacturing of Pad Assembly, Buckle (CSI)

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Specialized Polymer/Material Supply for Lens CapsThis subcontract involves the supply of certified raw polymers and plastics for prime contractors working on DLA Weapons Support ASC projects, specifically for the production of lens caps. The materials must strictly adhere to the technical specifications of NSN 5855-01-6894160 and the DLA Master List of Technical and Quality Requirements. To ensure full compliance with the Berry Amendment and the Buy American Act, the provider is required to furnish comprehensive Material Certifications and Mill Test Reports with all shipments. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 325211. Performance of the contract is centered in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 9, 2026, for this specialized material procurement effort.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

Lens Cap Fabrication and AssemblyThis subcontract involves the fabrication and assembly of 44 precision lens caps for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer is required to produce the caps according to NSN 5855-01-6894160 specifications and DLA Master List requirements using either precision molding or machining. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710. Strict quality and security standards are mandated for this project, including inspection systems compliant with SAE AS9003 or ISO 9001. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129. Additionally, the contractor must maintain CMMC Level 2 and DFARS 252.204-7012 compliance to ensure the protection of sensitive information.

POSTED

DEADLINE

Supply of Weapon Mounts (NSN 5342007638950)This subcontract involves the procurement or manufacture of three weapon mounts under NSN 5342007638950 for the Defense Logistics Agency Weapons Support ASC Supplier Oper AE and AF Div. The selected provider is responsible for delivering the units to Grayling, Michigan, ensuring that all items are packaged in accordance with ASTM D3951 and MIL-STD-129 and shipped using traceable methods. To ensure quality and compliance, the deliverables must adhere to MIL-STD-1916 or ASQ H1331 sampling standards and successfully pass a destination inspection. The contract falls under NAICS code 332994 and requires a response by November 9, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

DLA Compliant Packaging and Traceable Shipping ServicesThis subcontract for DLA Compliant Packaging and Traceable Shipping Services involves providing specialized military packaging and traceable shipping for prime contractors fulfilling DLA supply contracts. The scope of work requires palletizing goods according to RP001 DLA Packaging Requirements and ensuring all shipment and storage markings comply with MIL-STD-129. To maintain these standards, the provider must utilize MIL-STD compliant marking equipment and RP001 palletization materials to deliver components via the fastest traceable means. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. The opportunity is categorized under NAICS code 488510. Interested parties should note the posted date of November 1, 2026, with a response deadline of November 9, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing (FAT) for Aerospace Electrical Components

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Source Inspection and Certification for Critical Safety Items (CSI)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Battery Testing and Certification Services

Defense Logistics Agency

POSTED

DEADLINE

in about 23 hours

Critical Component Inspection and Certification

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Bearing Testing and Inspection Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

TEST, CHARACTERISTICS, D001-D003, 5D

Solicitation # SP450027F0659

Defense Logistics Agency

POSTED

DEADLINE

Wastewater Sample Testing and Analysis

Jacobs Creek Job Corps Ccc

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Inspection Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

VAV Box Sealing and Airflow Optimization

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

Boiler Inspection and Safety Testing

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Specialized Laboratory Research and Testing

FDA Office Of Acq Grant Svcs

POSTED

DEADLINE

Eddy Current Testing (ECT)

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS