Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

First Article Testing (FAT) Services for NSN 3040015276865

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of First Article Testing on two units of NSN 3040015276865 to verify compliance with specified technical requirements. All testing activities must be documented and reported in strict accordance with FAR 52.209-3, ensuring full transparency and adherence to federal acquisition standards. The successful contractor is obligated to complete all testing, submit final reports, and deliver the tested units within 120 days of contract award. The work is classified as a subcontract under NAICS code 541380, and the place of performance is identified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted by the Department of Defense under the organization Land Supplier Ops Wheeled Vehicles, and responses are due by July 30, 2026.

General Info

Perform first article testing on two units by July 30, 2026, in New Cumberland, PA, within 120 days.

Agency

Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLESView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct First Article Testing on 2 units of NSN 3040015276865, including test reporting in compliance with FAR 52.209-3 and delivery within 120 days of award.

Similar Contracts

Same NAICS industry code

Technical Data Packaging and Marking ComplianceThe contract requires technical and quality assurance support to ensure all items meet military packaging and marking standards, specifically MIL-STD-129, MIL-STD-130N, and MIL-STD-2073-1E, to guarantee proper identification, handling, and logistics tracking throughout the supply chain. This subcontract is focused on compliance with Department of Defense requirements and will be executed at the place of performance in Greensboro, North Carolina, with a zip code of 27409. The work involves verifying that all materials are labeled, packaged, and documented in full accordance with the specified military standards to maintain operational readiness and supply chain integrity. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a narrow window for proposers to submit their qualifications. The NAICS code 541380 classifies this as a professional, scientific, and technical services contract, emphasizing technical expertise over general labor or manufacturing. The agency responsible is the Department of Defense under the Land Supply Chain organization, and the contract is specifically designated as a subcontract, meaning it supports a larger procurement effort. All work must be completed with precision and traceability to meet the stringent demands of military logistics and inventory systems.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) and Engineering Documentation ServicesThe contract encompasses independent testing and validation of initial production samples to ensure compliance with stringent aerospace and defense standards, specifically AS9102 and MIL-STD-1916. This includes comprehensive dimensional inspections, material certification, and the generation of a full First Article Testing report, all critical to verifying that production processes consistently yield conforming components. The work is scoped under a subcontract classified under NAICS code 541380, indicating engineering services related to research and development in the physical sciences, and is managed by the Defense Logistics Agency under the Department of Defense. The contract is titled First Article Testing and Engineering Documentation Services, and while no solicitation number is provided, it is linked to an active award record through the DIBBS portal. The place of performance and point of contact details remain unspecified, and the work is expected to support defense supply chain integrity by delivering verified documentation and validated production samples prior to full-scale manufacturing. The posting date of July 20, 2026, suggests this is a forward-looking procurement initiative, likely tied to upcoming production cycles or new system integrations requiring certified first articles.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Quality Assurance & Production Lot Test Waiver SupportThe contract requires the provision of internal quality assurance and comprehensive technical documentation to support the waiver of Government Production Lot Testing, ensuring that all products continue to meet or exceed the standards established through prior approval processes. This involves implementing rigorous internal controls, documenting verification activities, and maintaining traceability of compliance measures to demonstrate to the Government that production outcomes remain consistently reliable without the need for traditional lot-level testing. The work must be executed with full alignment to Defense Logistics Agency requirements and the overarching compliance framework of the Department of Defense. The effort is classified under NAICS code 541380, indicating a focus on scientific and technical consulting services, and is structured as a subcontract under the DLA’s procurement framework. The performance location and specific point of contact details are not provided, but all activities must be coordinated to satisfy federal oversight standards and support the Government’s objective of streamlining logistics while preserving product integrity. The contract posting date indicates it is anticipated to be active in 2026, and all deliverables must be designed to sustain long-term acceptance of process waivers without compromising mission-critical performance or regulatory adherence.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Aerospace Quality Inspection and Acceptance SupportThe contract titled Aerospace Quality Inspection and Acceptance Support is a subcontract under the Defense Logistics Agency, part of the Department of Defense, aimed at providing inspection services to ensure government acceptance of aerospace components. The work involves verifying conformance to C-5 tolerances, conducting detailed documentation reviews, and operating under the oversight of the Defense Contract Management Agency. The services are critical to maintaining quality standards and regulatory compliance within defense aerospace supply chains. The NAICS code 541380 classifies this as an engineering services contract, indicating the technical nature of the inspection and assurance activities required. Although the specific location of performance and point of contact are not provided, the contract is scheduled for posting on July 20, 2026, and can be accessed through the DIBBS system using the contract number SPE4A725P4923. The subcontract is not subject to any specified set-aside provisions, meaning it is open to all eligible offerors without restrictions based on business size or demographics.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Contractor First Article Test (FAT) ExecutionThe contract requires the execution of a First Article Inspection and associated testing for the 4F75700-145A access panel, identified by NSN 0001S00000053, to ensure full compliance with technical specifications before full-scale production. This includes all necessary physical inspections, dimensional verifications, material validations, and performance tests as defined by government requirements, along with the complete documentation of results in the prescribed format for official submission and review. The work is performed under a subcontract arranged through the Defense Logistics Agency, under the Department of Defense, with the NAICS code 541380 indicating engineering services related to technical testing and analysis. The inspection and testing must be conducted precisely to meet military standards, and all outputs must be formally documented and submitted to government authorities for approval prior to any production release. The contract was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to the DLA’s award reference SPE4A725P4923.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Quality Testing & Inspection ServicesThe contract requires third-party verification of flat washers to stringent quality standards, focusing on dimensional accuracy, material composition, plating thickness, and legibility of markings. Inspection must be conducted per Level VII criteria with an Acceptable Quality Level of 0.1 and zero-defect sampling, meaning no defects are allowable and every unit must meet exact specifications. This high-bar inspection protocol ensures only flawless components are accepted, reflecting the mission-critical nature of the parts involved. The work is to be performed at the designated place of performance in Tracy, California, with the final delivery and verification outcomes subject to strict compliance with Department of Defense requirements. This subcontract falls under NAICS code 541380, indicating it is for other scientific and technical consulting services, and is sponsored by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, leaving a tight eight-day window for qualified vendors to submit proposals. The vendor must be prepared to deliver precise, documented verification results adhering to zero-tolerance standards, and the performance location and inspection protocol are non-negotiable. All work must be completed in alignment with DOD’s quality assurance expectations, and the contract is being issued through the DIBBS procurement platform, requiring digital submission and full regulatory compliance.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance and documentation of First Article Testing for an extractor component, ensuring compliance with engineering specifications through dimensional inspection, material verification, and functional testing. All testing activities must be thoroughly documented to demonstrate conformance and quality assurance before production proceeds. The work is classified as a subcontract under NAICS code 541380 and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 20, 2026, and the place of performance and specific location details are not provided, though the contractual obligations must be fulfilled in alignment with federal defense procurement standards. The contract reference is listed as SPE7L725P0178 and is accessible through the DIBBS system.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) Services for Water Purification ComponentsThe contract requires the performance of accredited First Article Testing on water purification components to ensure full compliance with applicable military specifications before transitioning to full-scale production. This testing is critical for verifying that design, materials, and manufacturing processes meet the stringent performance, durability, and safety standards mandated by the Department of Defense. The work is subcontracted under the oversight of the Defense Logistics Agency and falls under NAICS code 541380, indicating it involves scientific and technical consulting services. The testing must be conducted by a qualified and accredited laboratory and must document all results to demonstrate conformance prior to any production authorization. The contract supports critical defense infrastructure by ensuring reliable water purification systems are deployed under operational conditions.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Prohibited Substances Compliance TestingThe contract pertains to testing and certification services required to ensure that all deliverables comply with strict regulations prohibiting the presence of hazardous substances, specifically mercury and hexavalent chromium, as mandated by DFARS 252.223-7008 and MIL-DTL-24560. This subcontract is part of a broader procurement effort by the Defense Logistics Agency under the Department of Defense to maintain military supply chain integrity by enforcing environmental and safety standards. The work involves rigorous analytical procedures to verify material composition and出具 formal compliance documentation, ensuring that components and systems meet stringent DoD requirements for safe handling, use, and disposal. The contract falls under NAICS code 541380, indicating it is tied to technical testing and analytical services, and is scheduled to be active beginning in July 2026. Performance location details are not specified, suggesting the work may be conducted at multiple facilities or remotely by the contractor. The contract award link points to the DIBBS system, confirming it is a formally documented acquisition under U.S. defense procurement protocols. Compliance is not optional; failure to meet the prohibited substances standards could result in rejection of deliverables, financial penalties, or termination of contractual obligations.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Product Verification Testing (PVT) ServicesThe contract involves independent testing of rivet samples to verify compliance with MIL-SPEC standards, focusing on mechanical strength, corrosion resistance, and dimensional accuracy. This testing is critical to ensure the rivets meet the rigorous performance and durability requirements mandated by the Department of Defense for military applications. The work is classified under NAICS code 541380 and is structured as a subcontract under the Defense Logistics Agency’s Product Verification Testing Services program. The solicitation was posted on July 20, 2026, and the place of performance and organizational details are not specified, indicating that the testing may be conducted at accredited third-party laboratories or facilities chosen by the subcontractor. The contract leverages the DLA’s procurement infrastructure, with the official record accessible via the DIBBS portal under contract number SPE4A626PY310. Compliance with military specifications is the primary objective, and all testing procedures must be documented and validated to support quality assurance and supply chain integrity for defense-related hardware.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Packaging & Labeling ServicesThe contract requires compliant packaging, preservation, and hazard labeling services for electrical connectors classified as hazardous materials, ensuring adherence to all applicable regulatory standards for transport and handling. The work is tied to a subcontract under the Department of Defense’s Maritime Supply Chain ESOC Buys and must be performed at Robins AFB, Georgia, with a delivery deadline of July 31, 2026. The solicitation, posted on July 20, 2026, falls under NAICS code 541380, indicating specialized technical services, and targets providers capable of meeting DoD hazardous materials protocols without specifying set-aside status or small business preferences. All packaging and labeling must align with federal hazardous materials regulations, and the contractor is obligated to ensure full traceability and documentation throughout the process.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 11 hours ago

DEADLINE

Counterfeit Detection & Traceability ServicesThe contract involves independent verification, testing, and documentation services to ensure the authenticity and compliance of components with Department of Defense anti-counterfeiting requirements under the Counterfeit Deterrence and Assessment Program. This includes rigorous chain-of-custody protocols and lot traceability measures to safeguard against the introduction of counterfeit parts into the defense supply chain. The work is designed to provide auditable evidence of part integrity and provenance throughout procurement and delivery cycles. The contract is classified as a subcontract under NAICS code 541380 and is awarded under the Defense Logistics Agency, a component of the Department of Defense. It was posted on July 20, 2026, and is associated with contract SPE7M026P1290, with performance obligations tied to DoD-wide supply chain security standards. No specific place of performance or point of contact is provided, indicating the service scope is likely distributed across multiple defense logistics locations. The focus remains on technical validation and traceability systems that meet federal mandates for hardware authenticity and supply chain resilience.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES

Same awarding agency

Specialized Freight Shipping (FOB Origin to DLA Anniston)The contract requires the specialized transport of finished transmission cradles from the manufacturer’s location to DLA Anniston, Alabama, with strict adherence to U.S.-flag vessel requirements for ocean transport, though compliant foreign-flag vessels may be used if authorized under applicable regulations. All shipping must comply with FOB Origin terms, meaning the responsibility for logistics, documentation, and risk transfers to the carrier once goods leave the manufacturer’s facility. The NAICS code 484220 indicates this is a contract for specialized freight shipping, specifically targeting heavy or sensitive cargo movement that demands precision and regulatory compliance. Performance is anchored at the Anniston location with the zip code 36201-4199, and the contract is issued under the Department of Defense’s Land Supplier Operations for Wheeled Vehicles, reflecting its importance to defense logistics. This is a subcontract solicitation posted on July 19, 2026, with responses due by July 30, 2026. There is no set-aside designation specified, meaning it is open to all eligible parties without preference for small businesses or other categories. The solicitation number SPE7L226T0568 serves as the primary reference for submissions, and all potential bidders must ensure full alignment with transportation compliance standards, particularly regarding vessel flagging and end-point delivery to the designated defense location. The opportunity is accessible via the DIBBS portal, and proposers are expected to demonstrate proven capability in handling high-value defense-related freight under strict regulatory frameworks.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Materials Packaging and MarkingThe contract requires the packaging and labeling of coated components in full compliance with FED-STD-313 and IP025 hazardous material standards, ensuring all materials are properly identified and handled according to federal and industry safety regulations. It mandates the application of MIL-STD-129 barcoding for accurate tracking and inventory management, along with RP001-compliant palletization to guarantee secure and standardized transport logistics. The work is categorized as a subcontract under NAICS code 493190 and is being issued by the Department of Defense through the LAND SUPPLIER OPNS WHEELED VEHICLES office, with performance required at a facility in Anniston, Alabama, ZIP 36201-4199. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with no set-aside provisions specified.

Other Warehousing and Storage

POSTED

DEADLINE

High-Temperature and Chemical Agent Resistant Coating ApplicationThe contract requires the application of specialized chemical agent and high-temperature resistant coatings to transmission cradles in strict adherence to DCSC Drawing 16236, ensuring all performance and specification requirements are met. The work must comply with environmental regulations that explicitly prohibit the use of Class I ozone-depleting substances, mandating the use of approved, environmentally compliant materials and processes. The coatings must provide durable protection under extreme operational conditions while maintaining structural integrity and functional performance of the components. This subcontract is issued under the North American Industry Classification System code 332813 and is associated with the Department of Defense through its Land Supplier Operations Wheeled Vehicles office. Performance is mandated at the location in Anniston, Alabama, with a zip code of 36201-4199. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with all submissions required to meet deadlines and technical compliance without exception. The work is part of a broader effort to maintain readiness and sustainment of military vehicle systems under stringent quality and environmental standards.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Manufacturing of Transmission Cradles for Combat TanksThe contract involves the precision manufacture of transmission cradles for M1-series combat tanks based on official Army engineering drawings and technical data packages, requiring full-scale machining, welding, and comprehensive quality inspection to meet military specifications. The work must be performed at the designated place of performance in Anniston, Alabama, with strict adherence to technical standards and quality control protocols to ensure operational readiness and survivability in combat environments. This is a subcontract solicitation issued under the NAICS code 332999 for other fabricated metal product manufacturing, with a response deadline of July 30, 2026, and a posting date of July 19, 2026. The contracting activity falls under the Department of Defense, specifically the Land Supplier Operations Wheeled Vehicles organization, and no set-aside provisions are indicated. All proposers must be prepared to meet rigorous defense manufacturing requirements without specification of small business preferences or geographic restrictions beyond the mandatory performance location.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense Information (CDI)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect Controlled Unclassified Information on contractor systems, in full alignment with DFARS 252.204-7012 requirements. This subcontract is focused on ensuring cybersecurity compliance for Covered Defense Information as part of the Department of Defense’s broader effort to secure sensitive data within the supply chain. The work must be performed at the specified location in New Cumberland, Pennsylvania, with a response deadline of July 30, 2026, and the solicitation was posted on July 19, 2026. The North American Industry Classification System code 541512 identifies the nature of the work as encompassing computer systems design and related services, indicating the contractor is expected to provide technical expertise in cybersecurity implementation and support. All activities must adhere strictly to federal cybersecurity standards without deviation, with emphasis on continuous monitoring, documentation, and system integrity to meet DoD compliance obligations.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract titled Hazardous Materials Compliance and Labeling requires strict adherence to OSHA and DFARS standards for the proper labeling, documentation, and management of hazardous materials used in manufacturing or cleaning processes, with a specific emphasis on Safety Data Sheet (SDS) management to ensure regulatory compliance. All activities must be performed at the place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work is structured as a subcontract under the NAICS code 541620, indicating services related to environmental and other scientific and technical consulting. The contract is managed by the Department of Defense through its Land Supplier Operations Wheeled Vehicles office, and all submissions must be received by the deadline of July 30, 2026, with the solicitation originally posted on July 19, 2026. Compliance with federal regulations regarding hazardous material handling is mandatory and critical to the fulfillment of this agreement.

Environmental Consulting Services

POSTED

DEADLINE

Packaging and Preservation Services for Defense ShipmentThe contract requires certified packaging, preservation, and marking of military engine hoods in strict adherence to Defense Logistics Agency standards. Tasks include thorough cleaning and drying of components, application of protective cushioning to prevent damage during transit, and application of labeling that meets all regulatory and operational requirements for military shipments. All work must ensure the integrity and readiness of the engine hoods throughout the supply chain, from processing to delivery. Performance is mandated to occur at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation falls under NAICS code 493190 for other support activities for transportation and is structured as a subcontract under the Department of Defense’s Land Supplier Opns Wheeled Vehicles organization. The opportunity was posted on July 19, 2026, with a response deadline of July 30, 2026, leaving a narrow window for qualified vendors to submit proposals. Compliance with all technical, procedural, and regulatory requirements is essential for award consideration.

Other Warehousing and Storage

POSTED

DEADLINE

Manufacturing of Engine Compartment Hoods (NSN: 2510017278748)The contract calls for the fabrication, assembly, and delivery of military-grade engine compartment hoods designated by NSN 2510017278748, adhering strictly to Defense Logistics Agency specifications. All components must meet rigorous material, preservation, and packaging standards required for military use, ensuring durability and readiness under austere operational conditions. The work is to be performed under a subcontract structure with a designated place of performance in New Cumberland, Pennsylvania, at the ZIP code 17070-5002, indicating that final delivery and inspection will occur at this military supply location. The solicitation was posted on July 19, 2026, with a firm response deadline of July 30, 2026, providing suppliers with approximately eleven days to submit proposals. The NAICS code 336390 classifies this procurement under Other Transportation Equipment Manufacturing, signaling that the effort involves specialized fabrication beyond standard automotive production. While no set-aside preferences or point of contact details are specified, the procurement is managed by the Department of Defense under the Land Supplier Operations Wheeled Vehicles organization, underscoring its importance to vehicle maintenance and readiness across the military fleet.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Packaging & Preservation Services (Specialized)The contract demands specialized packaging, preservation, and palletization services strictly in accordance with MIL-STD-2073-1E, Special Packaging Instruction AM11581549, and DLA RP001, ensuring full military compliance for all handled materials. These standards require exacting procedures for protective packaging, environmental safeguarding, and secure pallet assembly to maintain equipment readiness during storage and transit, particularly for wheeled vehicles and related military assets. All work must adhere to rigorous defense logistics protocols to meet operational readiness requirements. Performed under a subcontract arrangement, the services are designated for the Department of Defense’s Land Supplier Ops Wheeled Vehicles program with performance centered in New Cumberland, Pennsylvania, at the zip code 17070-5002. The solicitation, posted on July 19, 2026, requires proposals to be submitted by July 30, 2026, and falls under NAICS code 561910 for other support services. The contract underscores the need for precise execution of defense-grade packaging methods to ensure the integrity, longevity, and deployability of military equipment throughout its lifecycle.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract seeks regulatory compliance support for hazardous materials, focusing on the preparation of Safety Data Sheets (SDS) and the application of hazard warning labels in accordance with OSHA’s Hazard Communication Standard and MIL-STD-129. These deliverables must be completed and submitted prior to contract award to ensure full compliance with federal safety and labeling requirements for defense-related shipments. The work is classified as a subcontract under NAICS code 541690, indicating professional, scientific, and technical services, and is being managed by the Department of Defense under the organization name LAND SUPPLIER OPNS WHEELED VEHICLES. Performance is designated for NEW CUMBERLAND, PA, with a zip code of 17070-5002, and the solicitation opened on July 19, 2026, with responses due by July 30, 2026. All submissions must meet the technical and regulatory standards outlined by the government prior to any award being made.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of NSN 3040015276865 (Wheeled Vehicle Component)The contract requires the manufacture or supply of 61 units of a military wheeled vehicle component identified by NSN 3040015276865, with full compliance to federal packaging, marking, and documentation standards. The work is being procured under a subcontract arrangement by the Department of Defense through the Land Supplier Operations for Wheeled Vehicles, and the performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, indicating a short turnaround for proposals. The North American Industry Classification System code 336340 confirms the scope relates to military vehicle manufacturing. All deliverables must meet exacting military specifications, and failure to adhere to packaging or documentation guidelines could result in rejection. The contract is part of a broader effort to support the maintenance and readiness of wheeled vehicle fleets within the Defense infrastructure.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThis contract is for independent inspection services at the origin to ensure conformance to Department of Defense Logistics Agency standards, encompassing dimensional verification, material certification review, and comprehensive documentation evaluation. The work is required to support quality assurance efforts for land supplier operations involving wheeled vehicles, with inspections conducted before shipment to confirm compliance with specified technical and regulatory criteria. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and is tied to the NAICS code 541330 for engineering services. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and the place of performance is designated as Anniston, Alabama, with a zip code of 36201-4199. The contracting activity falls under the Department of Defense, specifically the Land Supplier Operations Wheeled Vehicles office, though no point of contact or specific office address is provided. The contract opportunity is listed on the DIBBS platform, allowing qualified small businesses to submit proposals through the official solicitation link. All work must align with stringent DLA quality benchmarks to ensure mission readiness and supply chain integrity.

Engineering Services

POSTED

DEADLINE