Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) Services

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A subcontract has been issued by the ASC COMMODITIES DIVISION under the Department of Defense to perform First Article Testing on a single bearing unit to verify conformance with all specified technical requirements, including dimensional accuracy, material composition, load capacity, and stress performance characteristics. The contractor is required to execute the testing in accordance with established engineering standards and deliver a comprehensive formal report documenting the results within 120 days of task initiation. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and the work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contract falls under NAICS code 541380, categorizing it as engineering services, and is structured as a subcontract without a specific set-aside classification. All activities are to be conducted in alignment with the technical expectations set forth by the agency, and compliance is mandatory for contract acceptance.

General Info

Subcontract for First Article Testing of bearing unit per DoD specs, due in 120 days at New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform First Article Testing on one bearing unit to validate compliance with technical specs including dimensions, materials, load capacity, and stress performance; submit formal report within 120 days.

Similar Contracts

Same NAICS industry code

Technical Verification and Compliance TestingThe University of Southern Mississippi is seeking a subcontractor to perform independent technical verification and compliance testing on an umbilical cable prior to or upon delivery. The testing must evaluate critical performance parameters including tensile strength to ensure mechanical durability under operational loads, voltage rating to confirm electrical safety and functionality, optical signal integrity to guarantee reliable data transmission, and winch compatibility to verify seamless integration with deployment and retrieval systems. All tests must adhere to established industry standards and documented performance criteria to validate full operational readiness. The solicitation is open for responses until August 26, 2026, and is classified under NAICS code 541380, indicating it relates to other scientific and technical consulting services. Subcontractors are expected to deliver detailed test reports confirming compliance with all specified requirements.

UNIVERSITY of SOUTHERN MISSISSIPPI

POSTED

about 10 hours ago

DEADLINE

Production Lot Testing (PLT)The contract titled Production Lot Testing (PLT) requires the execution of destructive and non-destructive testing on samples taken from a production run to verify consistency and adherence to defense quality standards. The work must ensure that all manufactured items meet stringent performance and reliability criteria expected by the Department of Defense, with testing procedures designed to validate structural integrity, material properties, and functional compliance. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the physical location where the testing activities must be conducted. This subcontract falls under the NAICS code 541380, which encompasses engineering services related to scientific and technical testing, positioning the contractor as a specialized partner supporting defense production assurance. The solicitation was posted on August 9, 2026, with a strict response deadline of August 17, 2026, emphasizing the time-sensitive nature of the procurement process. The contracting entity is the ASC Commodities Division within the Department of Defense, which manages logistics and supply chain readiness for defense systems. There is no set-aside designation listed, meaning the opportunity is open to all eligible subcontractors regardless of business size or status. Contractors must be prepared to deliver technically rigorous test results under strict quality control protocols, and all submissions must be made through the provided DIBBS platform link to be considered valid. Failure to meet the deadline or test specifications could result in disqualification or compromise mission-critical defense material reliability.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance and documentation of First Article Testing for valve assemblies in full compliance with military and contractual specifications, with the successful submission of detailed test reports and physical samples as part of the delivery requirements. This work is critical to validating that the valve assemblies meet all design, performance, and quality criteria prior to full-scale production, ensuring readiness for military use. The testing must adhere to established standards and be thoroughly documented to provide traceability and confirmation of conformance. The opportunity is classified as a subcontract under NAICS code 541380, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Hill Air Force Base, Utah, ZIP 84056-5734. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026. All applicants must be prepared to meet rigorous defense procurement protocols, delivering not only technical accuracy but also strict adherence to timelines and documentation standards mandated by the federal defense supply chain.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract involves providing quality assurance and inspection services aligned with MIL-STD-1916 or ASQ Z1.4 standards to ensure product conformance, along with the preparation of a Certificate of Quality Compliance to verify that delivered items meet required specifications. Support is also included for origin acceptance activities, ensuring that the source and authenticity of materials or components are validated in accordance with defense procurement protocols. The work is designated as a subcontract under NAICS code 541380 and is associated with the Department of Defense’s Land Supplier Operations Vehicle Support organization, with performance required at the designated location in Texarkana, Texas, zip code 75507-5000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with all technical and contractual obligations centered on delivering certified quality documentation and inspection support for military equipment and supply chains.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 11 hours ago

DEADLINE

Specialized Packaging and Marking ServicesThe contract requires specialized packaging, labeling, and marking services for connector assemblies to meet military compliance standards, including the application of hazardous material warnings and unique identification (UID) markings as mandated by defense requirements. All work must adhere strictly to federal and military specifications to ensure proper handling, traceability, and safety throughout the supply chain, with a focus on durability and clarity under operational conditions. The place of performance is designated as Cherry Point, North Carolina, with the deliverables intended for use within Department of Defense systems. The solicitation is issued as a subcontract under NAICS code 541380, with a response deadline of August 20, 2026, and was posted on August 9, 2026. The contract is managed by the Active Devices Division under the Department of Defense, though no set-aside provisions are specified, and the opportunity is open to qualified subcontractors capable of meeting the technical and regulatory demands of military-grade packaging and identification. All submissions must align with the requirements outlined in the DIBBS procurement system under reference number SPE7M526T398Q.

ACTIVE DEVICES DIVISION

POSTED

about 11 hours ago

DEADLINE

Statistical Sampling and Quality Inspection ServicesThe contract awards statistical sampling and quality inspection services to a small business under a total small business set-aside, focusing on conducting quality conformance inspections using MIL-STD-1916 or ASQ Z1.4 sampling plans. These inspections include evaluating entire lots, identifying and reporting non-conformances, and supporting government acceptance processes to ensure product compliance with established military and industry standards. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and is classified under NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is structured as a subcontract under the Department of Defense’s Maritime Supply Chain ESOC Buys organization.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 11 hours ago

DEADLINE

First Article Testing and Qualification Support

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Quality Testing and Inspection Services

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling Compliance ServicesThe contract requires comprehensive packaging engineering, labeling, and regulatory compliance services for hazardous materials shipments in accordance with military and federal standards. The work involves ensuring all hazardous materials are properly packaged, marked, labeled, and documented to meet stringent safety and transport regulations applicable to defense logistics operations. Services must align with Department of Defense requirements and include adherence to applicable hazardous materials handling protocols, transportation rules, and international shipping guidelines where relevant. The subcontract is issued under NAICS code 541380 and is managed by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. The place of performance is designated as FPO with ZIP code 96672, indicating service delivery to military postal locations. The solicitation was posted on August 9, 2026, with a firm response deadline of August 17, 2026. The contract is designated as a subcontract and does not specify a set-aside type, making it open to eligible subcontractors capable of meeting the technical and regulatory demands of hazardous materials compliance for defense operations.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Metal Certification and Quality Documentation ServicesThis contract requires the provision of Certificate of Quality Compliance, also known as Mill or Material Certification, for every shipment to ensure full traceability and strict adherence to Department of Defense Logistics Agency and ASTM standards. The focus is on delivering accurate, verifiable documentation that confirms material specifications and regulatory compliance with each delivery. The solicitation, titled Metal Certification and Quality Documentation Services, is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by NAICS code 541380. Performance is required at Tracy, California, with a zip code of 95304-5000, and the response deadline is set for August 20, 2026. The contract is issued under the Department of Defense through DLA Dist San Joaquin, emphasizing the critical nature of documentation integrity in defense supply chain operations.

DLA DIST SAN JOAQUIN

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance and documentation of First Article Testing for butterfly valves, encompassing dimensional, material, and functional testing to ensure compliance with specified requirements. The successful bidder must deliver a detailed test report documenting all results, confirming that the valves meet all applicable standards and specifications before proceeding with full production. Testing must be conducted according to established protocols, with complete traceability and rigorous documentation to support validation. The solicitation is classified as a subcontract under NAICS code 541380 and is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at a location in NEW CUMBERLAND, Pennsylvania, with zip code 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. All submissions must be completed through the designated DIBBS platform prior to the deadline to be considered for award.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Quality Inspection & AQL Verification ServicesThe contract requires third-party inspection and AQL verification services for pin-rivet collars, adhering to specified acceptance quality levels from VII down to II with AQLs ranging between 0.1 and 4.0. These inspections must be performed by qualified external vendors to ensure compliance with stringent defense standards, with comprehensive documentation prepared to support government acceptance at the designated destination. The work is tied to a subcontract under the Department of Defense’s ASC Commodities Division, with performance focused at NEW CUMBERLAND, PA 17070-5002, where final acceptance will occur. The solicitation is open under NAICS code 541380 for other professional, scientific, and technical services, with responses due by August 17, 2026. There is no set-aside designation, meaning the opportunity is open to all eligible contractors. All inspections must be conducted with precision and thoroughness to meet government requirements, and the resulting documentation must be complete, accurate, and traceable to facilitate official approval. The contract underscores the critical need for reliable quality control in the supply chain of defense-related components.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic and Export-Controlled Materials ComplianceThis contract requires strict adherence to DFARS regulations governing the use of prohibited materials, specifically mandating compliance around hexavalent chromium, radioactive content reporting, and the exclusion of banned telecommunications equipment. All subcontracted deliverables must be evaluated and documented to ensure no restricted substances are present and that supply chain integrity is maintained in alignment with federal defense standards. The contract applies to materials used both domestically and in export contexts, with full transparency required for sourcing and composition verification. The opportunity is listed as a subcontract under NAICS code 541690, issued by the ASC Commodities Division under the Department of Defense, with performance tied to Tracy, California, ZIP 95304-5000. Interested parties must respond by August 17, 2026, and are directed to the official DIBBS portal for full solicitation details. While no specific set-aside status is indicated, compliance with defense-specific material restrictions and reporting obligations is non-negotiable and critical for award consideration.

Other Scientific and Technical Consulting Services

POSTED

about 11 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of NIST SP 800-171 cybersecurity controls to safeguard Covered Defense Information within contractor systems that handle classified or sensitive contract data. This effort is mandatory for ensuring compliance with federal cybersecurity standards applicable to defense contractors and involves a full assessment and record-keeping of all required security controls across systems processing protected information. The work must be completed in alignment with the NIST framework and demonstrated through formal documentation to meet contractual obligations. The contract is classified as a subcontract under the NAICS code 541512, associated with computer systems design services, and is issued by the ASC Commodities Division of the Department of Defense with performance required in Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, indicating a tight turnaround for submission. Although no set-aside type is specified, the contract is governed by DoD cybersecurity regulations and demands strict adherence to NIST guidelines to protect national defense information, making compliance non-negotiable for award consideration.

Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of all hazardous materials utilized in manufacturing or coating operations and the ongoing maintenance of Safety Data Sheets that comply with OSHA regulations as well as Department of Defense federal requirements. Responsibility includes ensuring accurate, up-to-date documentation for every chemical or substance involved in production processes, with strict adherence to federal standards for hazard communication and worker safety. All SDS must be systematically managed, accessible, and aligned with current regulatory frameworks to support compliance during inspections and operational audits. Performance is based in Tracy, California, with a response deadline of August 17, 2026, and the contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The procuring entity is the ASC Commodities Division within the Department of Defense, indicating the work supports defense-related manufacturing or supply chain activities. Full compliance with both OSHA and DoD mandates is non-negotiable, and the contractor must demonstrate proven capability in hazardous materials management, documentation accuracy, and regulatory vigilance to meet the obligations of this engagement.

Environmental Consulting Services

POSTED

about 11 hours ago

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, palletization, and labeling services for lock washers in accordance with MIL-STD-129 standards and DLA RP001 requirements, ensuring all units meet military specifications for identification, handling, and shipment. The work must be completed such that each item is properly labeled, packaged at the unit level, and palletized for efficient transport and inventory management, with the final delivery destination being Tracy, CA, and the zip code 95304-5000. All activities must align strictly with the defined military packaging protocols to guarantee compliance and seamless integration into the Defense Logistics Agency’s supply chain. The solicitation is classified as a subcontract under the NAICS code 493190, which pertains to other warehousing and storage, indicating the scope focuses on logistics and handling rather than manufacturing. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While no specific point of contact or set-aside details are provided, performance is exclusively tied to the Tracy, CA location, and the winning party will be responsible for full adherence to all labeling, packaging, and palletization directives without deviation.

Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

Precision Lock Washer ManufacturingThe contract calls for the manufacture of precision lock washers in full compliance with military specifications, ensuring adherence to strict material composition, dimensional tolerances, and performance criteria. The product must meet all technical and quality standards required for military-grade applications and is destined for delivery to Tracy, CA, specifically to a facility with the ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 332722, which classifies the activity as forging and stamping operations, and is managed by the ASC Commodity Division under the Department of Defense. All responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026, providing a window of eight days for interested parties to prepare and submit proposals. The place of performance is fixed at Tracy, CA, and full compliance with the military standards is mandatory for award consideration.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires compliance with MIL-STD-2073-1E and DLA RP001 for the packaging and marking of fasteners, encompassing all aspects of labeling, palletization, and hazardous materials documentation to ensure full adherence to military standards. All work must be performed at Robins AFB, Georgia, with strict attention to the specified technical requirements to meet Department of Defense supply chain protocols. The solicitation is restricted to HUBZone-certified small businesses under a HUBZone Set-Aside designation, and the NAICS code 493190 indicates the focus on warehousing and storage services. Offers must be submitted by the deadline of August 17, 2026, with the procurement managed by the ASC Commodities Division under the Department of Defense.

Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

First Article Testing and Engineering Compliance ServicesThe contract requires the performance of First Article Testing on three units designated as Lot/Item 5306/1218846, with all testing activities strictly aligned to AS9102 standards and applicable engineering change controls. The deliverable is a formal test report that documents compliance with technical specifications and ensures that the first production units meet all required quality and performance criteria. This engagement is classified as a subcontract under a HUBZone Set-Aside, intended to support small businesses located in historically underutilized business zones. The work is to be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887, and falls under the NAICS code 541330 for engineering services. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense. All testing procedures must adhere to rigorous aerospace quality standards, and the contractor must demonstrate full compliance with technical documentation and change management protocols throughout the process.

Engineering Services

POSTED

about 11 hours ago

DEADLINE

Self-Retaining Bolt SupplyThe contract calls for the supply of 330 self-retaining bolts identified by NSN 5306001218846, with all packaging required to meet Defense Logistics Agency compliance standards and delivery coordinated to Robins Air Force Base at the specified zip code. Terms are FOB Origin, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. This subcontract is designated as a HUBZone Set-Aside, reserved for businesses certified in Historically Underutilized Business Zones, under NAICS code 332722 which classifies the work as forging and stamping. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense under its official procurement portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Precision Fastener Supply (Close Tolerance Bolts)The contract requires the supply of 5,500 close tolerance bolts with the National Stock Number 5306001218846, all of which must comply with military specifications for quality, dimensions, and performance. The vendor is responsible for proper packaging and labeling in accordance with government standards to ensure traceability and handling integrity during transit. Delivery is mandated to Robins Air Force Base, specifically at the ZIP code 31098-1887, with all obligations tied to the contract’s performance requirements and timelines. The solicitation is structured as a subcontract under a HUBZone Set-Aside designation, meaning only qualified small businesses located in historically underutilized business zones are eligible to compete, promoting economic development in targeted areas. The North American Industry Classification System code 332722 identifies the category as machine shops and precision turning centers, indicating the specialized manufacturing capability needed to meet the tight tolerances required. The opportunity was posted on August 9, 2026, and responses are due by August 17, 2026, managed by the ASC Commodities Division under the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Electronic Invoice and Payment Processing (WAWF Support)The contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow (WAWF) system in full alignment with Department of Defense payment protocols. All documentation must be processed electronically via WAWF to ensure timely and accurate payment, adhering strictly to DoD standards for invoice verification and receipt acknowledgment. The work is to be performed in support of the ASC Commodities Division, with the primary place of performance located at Hill AFB, Utah, 84056-5734, and is classified as a subcontract under NAICS code 541512 for custom computer programming services. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026, with no set-aside designation specified. Participation requires full technical capability to interface with WAWF and maintain compliance with all federal government electronic transaction requirements.

Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

Domestic Content and Regulatory Compliance SupportThe contract requires comprehensive documentation and verification services to ensure full compliance with the Buy American Act, the Berry Amendment, and U.S.-flag vessel shipping regulations, all critical for maintaining domestic sourcing and transportation standards in defense-related procurement. Services must confirm that all materials, components, and finished goods meet the stringent domestic content thresholds and manufacturing requirements mandated by these statutes, with rigorous audit trails and supporting evidence provided to demonstrate adherence. Performance is centered at Hill Air Force Base, Utah, with a focus on delivering verifiable records and certifications to the Department of Defense’s Commodity Division. The solicitation is structured as a subcontract with a NAICS code of 541611, indicating that the work involves management, scientific, and technical consulting services dedicated to regulatory compliance. Proposals must be submitted by August 17, 2026, and interested parties are directed to the DIBBS portal for formal submission details. The effort underscores the federal government’s emphasis on enforcing Made in America policies within its supply chain.

Administrative Management and General Management Consulting Services

POSTED

about 11 hours ago

DEADLINE