Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

First Article Testing of IFBAM Squib

Active
N00174-26-RFPREQ-E24-0014Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Nswc Indian Head DivisionView Agency

NAICS

325920 - Explosives ManufacturingView NAICS

Place of Performance

14224, AZ, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Indian Head Division
Contacts1 person available
OfficeINDIAN HEAD, MD, 20640-1533, USA
Organization / Agency
Department Of Defense → Nswc Indian Head Division
View Agency Profile
Office AddressINDIAN HEAD, MD, 20640-1533, USA

Full Description

Show more

This Sources Sought notice is being posted to satisfy the requirement of Defense Federal Acquisition Regulation Supplement 206.302-1(d). The Naval Surface Warfare Center, Indian Head Division (NSWC IHD), Contracts Department intends to award a contract for the First Article Testing (FAT) and procurement of Squib P/N 3703-1 and Refurbishment Kits P/N 2896387 for the Inadvertent Fire Brake Actuator Mechanism (IFBAM) on a sole source basis to Pacific Scientific Energetic Materials Co California LLC (PacSci), CAGE Code: 54181 PacSci owns the proprietary technical data package and has specialized tooling, equipment, and subject matter expertise for manufacturing and testing. 


THIS NOTICE IS NOT A REQUEST FOR PROPOSAL.  This acquisition is being pursued on a sole source basis under the statutory authority of 10 USC 3204(a)(1), as implemented in FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements.  This notice of intent is not a request for competitive proposals nor does it restrict the Government from an ultimate acquisition approach; however, the Government will consider all responses received to this notice. A determination by the Government not to compete this requirement is solely within the discretion of the Government. This sources sought should not be construed as a commitment by the Government for any purpose. Requests for solicitation will not receive a response. All information is to be submitted at no cost or obligation to the U.S. Government. The U.S. Government reserves the right to reject, in whole or in part, any input as a result of this market survey. The U.S. Government is not obligated to notify respondents of the results of this survey. If a formal solicitation is generated at a later date, a solicitation notice will be published.


All interested sources shall provide the organization name, address, point of contact, phone number, fax number, e-mail address, business size, taxpayer identification number, DUNS number, and CAGE Code.  In addition, all interested sources shall provide a summary of their company’s capabilities.


All responding sources must email their response submissions no later than 5:00 pm EST, 22 July 2026 to:


NSWC IHD 022 Erika Cabot, Contract Specialist


4081 North Jackson Road, Bldg. 841


Indian Head, MD 20640-5116


Erika.n.cabot.civ@us.navy.mil

Similar Contracts

Same NAICS industry code

NAICS: 325920
New
Federal
B1 Parts IDIQThis solicitation, identified as FA8213-26-R-3022 for the B1 CAD/PAD Parts IDIQ, is a five-year indefinite delivery indefinite quantity contract with an estimated total ceiling value of $23 million, issued by the Department of the Air Force, AFLCMC EBHK, located at Hill Air Force Base, Utah. The procurement is anticipated to be awarded as a sole source to Chemring Energetic Devices under FAR 6.302-1 due to the highly specialized nature of the parts, which no other source can satisfy. Although the solicitation permits responsible sources to submit capability statements, proposals, or quotations, the award is expected to remain with the sole designated vendor. The solicitation has been extended to allow additional time for proposal development, and administrative clarifications have been made to CLINs 0017, 0019, and 0020 regarding part numbers. Deliveries will be made FOB origin at the contractor’s facility to the designated shipping code B FV2037 at Hill Air Force Base, with delivery timelines specified per line item including 18 months ARO for key components. Detailed specifications, packaging, and marking requirements are governed by MIL-STD-2073-1, MIL-STD-130, MIL-STD-129, and AFMC Form 158, necessitating compliance with National Stock Number, Configuration Item Identifier, serial number, and Federal Supply Code for Manufacturers marking standards. All items require Unique Item Identification and physical serial number markings, and shipments must comply with stringent military packaging, handling, and documentation standards including DD Forms 1574 and 1574-1. The contract incorporates extensive clauses covering government property, pass-through charges, cost or pricing data, child labor, equal opportunity for veterans, liability limitation, and performance-based payments, with invoicing and payment strictly required through Wide Area WorkFlow. Offerors must complete current annual representations in SAM, including certifications for Buy American, trade agreements, and foreign ownership disclosure. Quality assurance is governed by higher-level contract requirements and final government inspection, with government access to contractor facilities permitted upon ten days’ notice. Supporting documentation totaling over 150 pages includes the Statement of Work, item descriptions, packaging guidelines, CDRLs, JQRs, SPIs, and pricing schedules, all critical to proposal submission which must be received by 23:00 UTC on
FA8213 Aflcmc Ebhk

POSTED

about 22 hours ago

DEADLINE

in 26 days
View Details
NAICS: 325920
New
Federal
Radford Army Ammunition Plant - DRAFT SolicitationThe Draft Request for Proposal #3, identified as W519TC-26-R-A046, seeks industry proposals for the production of propellants and the operation and modernization of the Radford Army Ammunition Plant under a single Indefinite Delivery, Indefinite Quantity (IDIQ) contract structured with a five-year base period, a five-year evaluated option exercised at award, and two additional unevaluated 10-year options that could extend the maximum performance period to 30 years. The contract encompasses a broad scope of mission-critical services, including environmental management, facility operations, fire protection, security and antiterrorism, maintenance, safety and industrial hygiene, utilities, technology and cybersecurity, and ground water monitoring, with certain functional areas merged or eliminated to streamline requirements. Direct-funded performance work statements drive the day-to-day operations, while separately funded Production Base Support initiatives enable modernization, rehabilitation, demolition, or relocation of government-owned production facilities through the Army Corps of Engineers. The contract also includes a firm, non-negotiable ceiling of $560 million for NC Fines Disposal Modernization, with the total estimated contract value projected at $20.144 billion, and pricing structured around plant-wide production volume tiers. Offerors must maintain a SECRET-level facility security clearance and comply with stringent NISPOM, AR 380-5, and OSHA standards, with full flow-down of safety and regulatory obligations to subcontractors and tenants, for which the prime contractor remains solely responsible. All proposals must be submitted electronically via PIEE by July 20, 2026, in specified formats—PDF for technical volumes and Excel for pricing—with no password protection and full compliance with SAM registration, FAR, DFARS, and unique deviations including the System for Award Management-Registration clause under Deviation 2026-00038 and Security Prohibitions under FAR 52.240-90. Evaluation will follow a best-value trade-off approach, prioritizing Technical (significantly more important than Past Performance, which in turn is significantly more important than Price) and requiring all non-price factors to achieve at least an Acceptable rating, with Other-than-Small Business offerors mandatorily submitting an acceptable Small Business Subcontracting Plan. Deliverables are governed by CDRLs, and production and packaging must adhere to MIL-DTL-244, MIL-STD-129, MIL-STD-1
W6QK Acc-Ri

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 325920
New
Federal
1356 - 1356-00-415-6713-TW58 and 1356-01-123-4744 YW09The solicitation N0010426RK066 seeks the procurement of two specialized pressure cylinder assemblies for U.S. Navy torpedo systems: 155 units of TW58 (Cylinder, Pressure CO2 Bottle, Modified for Torpedo MK46 and MK54 All Mods, Exercise Only) and 635 units of YW09 (Cylinder Assembly, Torpedo Pressure, CO2 Bottle, Extended for Torpedo MK46 and MK54 All Mods, Warshot Only), identified by NSNs 4T-1356-00-415-6713-TW58 and 4T-1356-01-123-4744-YW09 respectively. Both items must be manufactured in strict compliance with designated drawings—DWG 7021666 Rev B for TW58 and DWG 7021661 Rev C for YW09—and adhere to the Assembly Level Baseline - Sequential process. Technical approvals for any variances or engineering changes are controlled exclusively by NUWC Keyport Code N321, with a 45-day response expectation, and serial numbers are only valid upon explicit approval by this authority. The contract is anticipated to be awarded as a Firm Fixed Price contract with a DPAS rating of DO-A6, under the Department of Defense, with performance and delivery directed primarily to NUWC Division Keyport, WA. Delivery schedules are phased, beginning with a single set of technical data within 30 days of award, followed by first article testing units delivered within 150 days of contract issuance, and production quantities delivered within 180 days after First Article Test approval. An option exists for the Government to exercise a one-year extension for TW58 up to 110% of the base quantity and for YW09 up to 100% of the base quantity. All supplies must comply with stringent quality, identification, and packaging standards. Quality assurance requires adherence to ANSI/ISO/ASQ Q9001-2008 and ISO-9001:2015, with inspections conducted by Government representatives at the contractor’s or subcontractor’s facility using MIL-STD-105 (MIL-STD-1916) Inspection Level II and specified AQLs: 100% inspection for critical characteristics,
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 325920
New
Federal
C17 FEC PartThe solicitation FA8213-26-R-3054 for the C17 FEC Part is issued by the Air Force Sustainment Center at Hill Air Force Base, Utah, with a response deadline of August 14, 2026, and a posted date of July 15, 2026. Offers must be submitted electronically to Tyson Tharp at tyson.tharp@us.af.mil, with proposals exceeding 10MB requiring either multiple emails or a pre-requested DoD SAFE link at least 24 hours prior to the deadline. Offerors are responsible for ensuring successful delivery and are strongly encouraged to obtain an email receipt acknowledgment. The contract has no set-aside and falls under NAICS code 325920, with performance required at Hill Air Force Base, Utah. Technical evaluation is the primary factor in award determination, assessed through adjectival ratings for Qualified Vendor and Schedule, with technical merit significantly outweighing price in the best value trade-off. Price is evaluated for reasonableness but does not drive the decision; the award will follow FAR best value procedures, not lowest price technically acceptable. Packaging and marking must strictly comply with MIL-STD-2073-1E, MIL-STD-129R, MIL-STD-130 for Unique Item Identification, and MIL-STD-147E, with hazardous materials governed by DOT, IATA, IMDG, and AFMAN 24-604 standards. Wood packaging must meet ISPM 15 with the IPPC mark. All items must carry Human Readable Information and Machine Readable Data Matrix codes per MIL-STD-130, including CAGE code, lot number, and serial number. ESD-sensitive items require compliant packaging per ANSI/ESD S20.20 and MIL-HDBK-773B. Inspection and acceptance are conducted by government personnel at the delivery point, with rework governed by Clause ES7034. The contractor must provide a Work Breakdown Structure, milestones, and monthly performance reports, aligned with the Statement of Objectives for aircraft egress system components. No contract value, CLIN pricing, or contract type is specified. Payment office, accounting codes, invoicing method, and COR information are not provided. Offerors must complete required representations and certifications per Section K, including CAGE code for item traceability. Compliance with AS9100 or
FA8213 Aflcmc Ebhk

POSTED

2 days ago

DEADLINE

in 27 days
View Details
NAICS: 325920
New
Federal
1355 - 01-620-4752 CWRT DISPENSER ASSEMBLY, WIRE, MK8 MOD 3The contract solicitation N0010426RK028 seeks the provision of the CWRT Dispenser Assembly, Wire, MK8 Mod 3, identified by NSN 1355-01-620-4752, under a Firm Fixed Price arrangement. The item must be manufactured and delivered in strict compliance with a detailed set of technical drawings and specifications including 8555076, 2500838, 2642742, and others, with specific revisions designated. Deliverables are divided into multiple line items: technical data due 30 days after award, five first article test units due 120 days after award, 90 production units due upon completion of first article approval, and an additional 60 units for the Navy Submarine Torpedo Facility 360 days after first article approval. The packaging, marking, and identification of each unit must adhere to MIL-STD-130 and MIL-STD-129 for unique item identification and shipment labeling, with machine-readable markings verified against Appendix A of MIL-STD-130. Serial numbers are required and must be recorded using an authorized form, while hazardous materials must comply fully with Title 49 CFR. All items are designated as Controlled Inventory Item Code 7, and the contractor must ensure preservation and packaging per associated drawings and applicable standards such as ASTM-D5486, MIL-PRF-131, A-A-208, and SAE-AS478. The contract mandates compliance with extensive Federal Acquisition Regulation clauses related to ethics, fraud, and cybersecurity, including 52.203-3, 52.203-5, 52.203-7, 52.203-8, 52.211-2, 52.242-15, 52.242-17, and 252.204-7008, 252.204-7020 for NIST SP 800-171 cybersecurity and safeguarding of covered defense information. Offerors must validate their SAM registration, complete required representations including those on foreign ownership, Buy American compliance, and secondary Arab boycott, and submit a detailed proposal in four volumes—introductory, past performance, small
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 325920
New
Federal
Solicitation B2 Ctg Cad/Pad PartThis solicitation, FA8213-26-R-3052, issued by the Department of Defense through the FA8213 Aflcmc Ebhk office at Hill Air Force Base, Utah, seeks suppliers for Cartridge Actuated Devices and Propellant Actuated Devices (CAD/PAD), classified as Critical Safety Items, to support aircraft egress systems. The contract requires full compliance with stringent military packaging and marking standards including MIL-STD-2073-1, MIL-STD-129, MIL-STD-130, and AFMCI 24-201, with specific requirements for Unique Item Identification using Data Matrix ECC 200 barcodes and mandatory inclusion of Manufacturer’s Part Number, Serial Number, Lot Number, and Julian Date of Manufacture. All items must be packaged to protect electrostatic sensitive devices using ANSI/ESD S20.20 compliant materials and labeled accordingly, while hazardous materials such as Line Item 0001 (NSN 1377-01-521-3457 ES) must adhere to DOT Class 1.4S and UN0173 shipping regulations under 49 CFR Parts 100-185. The acquisition is unrestricted with NAICS code 325920 and requires offerors to be pre-qualified sources, with new applicants submitting detailed qualification packages prior to award. Proposals must be submitted by July 7, 2026, and are subject to evaluation under a best value source selection process where technical merit significantly outweighs price, though both factors are integral. The technical evaluation focuses on the offeror’s qualified vendor status, technical approach, quality control procedures, work breakdown structure, and realistic scheduling with defined milestones, all to be submitted in searchable digital formats compliant with Adobe Acrobat, Microsoft Word, and Excel. Pricing must be reasonable and supported by cost or pricing data per FAR provisions, with payment processing mandated through the Wide Area Workflow (WAWF) system using designated DoDAACs and document types based on CLIN structure. Contract administration requires adherence to numerous FAR and DFARS clauses, including provisions for changes, termination, bankruptcy, disputes, and liability limitations, with additional compliance obligations under NIST SP 800-171 for cybersecurity and CUI protection, Buy American Act requirements, Defense Priorities and Allocations System, and Organizational Conflict of Interest rules. All deliverables
FA8213 Aflcmc Ebhk

POSTED

3 days ago

DEADLINE

in 24 days
View Details
NAICS: 325920
New
Federal
6135-01-339-8064 CWRG Battery Thermal CrossoverThe contract solicitation N0010426RK070 is for 6135-01-339-8064 CWRG Battery Thermal Crossover components, issued as a total small business set-aside under FAR 19.5, requiring all offerors to qualify as small businesses under NAICS code 325920. The base quantity is 1,100 units with an optional one-year extension that may increase the total to 1,320 units, delivered in tiered ranges under a stepladder pricing structure, though actual unit prices are not provided and all line items are marked as Not Separately Priced. The item is classified as explosive, necessitating a Safety Survey and compliance with specified explosive weight and classification criteria outlined in the solicitation. Delivery is governed by FOB Origin or FOB Destination depending on the line item, with specific delivery points including Yorktown, VA; Newport, RI; and Keyport, WA, each tied to DoDAAC codes and designated government facilities. Performance is milestone-driven, using terms like DADC and DAFATA rather than calendar dates, and requires adherence to strict configuration management, quality control, and documentation standards including ANSI/EIA-649, MIL-HDBK-61, and ISO-9001:2015. All deliveries must comply with MIL-STD-2073-1 and MIL-STD-1669 packaging standards, including reusable shipping boxes per PPP-B-1672E and hazardous material guidelines from 49 CFR. Marking must meet MIL-STD-129R and MIL-STD-130 requirements, employing machine-readable Data Matrix barcodes with Unique Item Identification (UID) verified through Automatic Identification Technology. Invoicing and receiving reports are exclusively processed through Wide Area WorkFlow (WAWF), with mandatory submission of WAWF-RR documents within 24 hours of shipment, complete with carrier, tracking number, and shipment date in the comment field. Physical documentation must be affixed to shipments appropriately based on volume and type. Evaluation is based on a best-value trade-off, where past performance—specifically quality and timeliness of delivery—is significantly more important than price, with offerors required to achieve at least a “Limited Confidence” rating to be eligible. Proposals must be submitted electronically in three separate volumes (Introductory, Past Performance, Price),
Navsup Weapon Systems Support Mech

POSTED

5 days ago

DEADLINE

in 26 days
View Details

More opportunities from Department Of Defense → Nswc Indian Head Division

Same awarding agency

NAICS: 561920
New
Federal
Technical Collaboriation Initiative (TCI)The Technical Collaboration Initiative (TCI) is a sources-sought opportunity issued by the NSWC Indian Head Division to secure a comprehensive suite of collaborative workspace and expert support services in close proximity to its main gate. The contract seeks facilities located within ten miles of Indian Head, Maryland, that are accredited for Secret-level classification and include classrooms, laboratories, office space, and conference rooms designed to enable secure collaboration, training, planning, testing, and operational support. These facilities must accommodate mission-critical activities related to energetics, ordnance systems, research and development, test and evaluation, engineering, explosive ordnance disposal, and counter-improvised explosive device operations. On-demand access to qualified Subject Matter Experts across these technical disciplines is a core requirement to ensure continuous support for the division’s full-spectrum energetics mission. The solicitation, identified as N00174-26-RFPREQ-10-0081, was posted on July 15, 2026, with a deadline for responses set for July 30, 2026. This effort falls under NAICS code 561920 and is managed by the Department of Defense through the NSWC Indian Head Division office located in Indian Head, Maryland. Melinda Blaine serves as the point of contact for inquiries and submissions. Proposals must demonstrate the ability to meet stringent security protocols, provide physically secure and classified environments, and ensure seamless integration with the division’s existing operations. The goal is to establish a responsive, secure, and technically robust collaboration platform to enhance the effectiveness and efficiency of NSWC IHD’s technical missions.
Convention and Trade Show Organizers

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 333248
New
Federal
Special Industrial Manufacturing Equipment and Parts (Vacuum, Mixing, and Grinding)The Naval Surface Warfare Center Indian Head Division seeks to establish Blanket Purchase Agreements with small businesses capable of supplying commercial-grade parts and services for specialized industrial machinery, including vacuum pumps, mixers, grinders, and vacuum filters, all under NAICS code 333248. These BPAs will support procurement needs for parts such as mixer components, grinder parts, and vacuum filter assemblies across multiple PSC/FSC classifications, with all individual call orders capped below the Simplified Acquisition Threshold. Vendors must submit a cover sheet with official company details, demonstrate technical expertise, and provide a current price list to facilitate direct awards under $10,000. Past performance is a critical evaluation factor, requiring at least three verified references that include contract numbers, award amounts, point of contact information, and descriptions of delivered items, assessed on customer satisfaction, timeliness, technical success, program management, and quality. All interested parties must maintain active registrations in both the System for Award Management and the Procurement Integrated Enterprise Environment to enable invoice submission and payment processing. This solicitation is a total small business set-aside, and firms holding a GSA contract are encouraged to include their contract number in their submission. Successful vendors will receive a Master BPA, granting them eligibility to compete for future task orders under this program. Responses are due by November 11, 2028, and all submissions should be directed to the designated point of contact at NSWC IHD in Indian Head, Maryland.
All Other Industrial Machinery Manufacturing

POSTED

3 days ago

DEADLINE

in over 2 years
View Details
NAICS: 334519
New
Federal
CIP Mechanical Props Suite ReplacementThe Naval Surface Warfare Center, Indian Head Division is seeking to procure a comprehensive suite of mechanical testing system upgrades and associated equipment under a sole-source Firm Fixed Price contract awarded to Illinois Tool Works, Inc. The requirement includes five retrofit packages for 6800 Series Instron EM systems, each corresponding to a specific System ID, along with a torsion add-on for one of those systems. The scope further encompasses five environmental chambers from the 3119-606 and 3119-610 series, five AVE3 video extensometers, a 3621-002 hydraulic power unit, a CP139996 closed-loop water chiller, and a CP141000 remote start/stop system. Comprehensive on-site installation, verification, and training services are required for all five retrofits, the environmental chambers, and the AVE3 devices, as well as separate on-site installation and commissioning for the hydraulic power unit, chiller, and remote start/stop system. The acquisition is being pursued under 10 USC 3204(a)(1) and FAR 6.302-1 due to the uniqueness of the equipment and the absence of alternative suppliers that can satisfy the government’s specific technical needs. All responses must be submitted via email to Melinda Blaine no later than 4:00 p.m. EST on July 30, 2026, with large files required to be compressed in ZIP format. This is not a competitive solicitation, and while responses are accepted, no obligation is incurred by the government to award a contract.
Other Measuring and Controlling Device Manufacturing

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 332710
New
Federal
Manufacturing & Services Acquisition (MASA) Manufacturing SupportThis contract is a multiple award, Firm Fixed Price, Indefinite Delivery Indefinite Quantity (IDIQ) vehicle issued by the Naval Surface Warfare Center Indian Head Division to procure manufacturing parts and assemblies in support of military projects under the Manufacturing and Services Acquisition (MASA) Manufacturing Support program. The purpose is to establish a contractual framework for build-to-print fabrication using machine shop processes across five task areas: Production Hardware, Research and Development Hardware (small business set-aside), Plating (small business set-aside), Electronics Assembly, and Advanced Machining. The North American Industry Classification System (NAICS) code for all tasks is 332710, and the total estimated contract value is $40 million, with individual task ceilings of $15 million, $10 million, $1 million, $9.5 million, and $4.5 million respectively, to be shared among all awardees. The period of performance spans from December 16, 2026, to December 15, 2031, with deliveries and task orders to be issued as needed, governed by F.O.B. Destination terms per FAR 52.247-34. The award will be made to all responsible offerors who meet pass/fail gates, including proposing for at least one task area, demonstrating that at least 50% of the work is performed by the offeror’s own personnel or first-tier subcontractors, and meeting acceptable ratings in technical approach, past performance, and small business subcontracting plan compliance. Contract performance requires strict adherence to quality standards including ANSI/ASQC Q9000–Q9004, MIL-STD-130 for unique item identification, and MIL-STD-129 for shipping and storage labeling, with all items subject to machine-readable verification per Appendix A of MIL-STD-130. Inspection and acceptance follow zero-defect tolerance for most items, with sampling plans based on ASQ Z1.4 or MIL-STD-1916, depending on criticality. Offerors must comply with cybersecurity requirements under CMMC Level 2 (Self-Certification) and DFARS 252.204-7012 for systems handling Controlled Unclassified Information or Federal Contract Information, and must submit System Security Plans and Plans of Action and Milestones within 30 days of award. Packaging and data handling follow best commercial practices for unclassified data and
Machine Shops

POSTED

4 days ago

DEADLINE

in 17 days
View Details
NAICS: 324122
New
Federal
ASPHALTIC COMPOUNDThe U.S. Navy’s Naval Surface Warfare Center Indian Head Division is soliciting quotes for an asphalting compound under a firm-fixed-price purchase order using Simplified Acquisition Procedures, with the solicitation number N0017426Q1056. The requirement is unrestricted and targets commercial products aligned with NAICS code 324122, with a small business size standard of 1,000 employees. All quotations must strictly adhere to the technical specifications and brand requirements outlined in the Statement of Work, and must include all costs such as shipping and handling. Evaluation will be conducted on a Lowest Price Technically Acceptable basis, with no discussions anticipated, and award will go to the responsible offeror whose quote is technically acceptable and offers the lowest price. Quotes must be submitted via email to Francine L. Keys by 10:00 AM EST on July 23, 2026, and must include a cover sheet with the company’s official name, point of contact details, Unique Entity Identifier, and CAGE Code. Late submissions will not be accepted. Questions must be submitted by July 17, 2026, with responses provided by July 20, 2026. The contract will be awarded in Indian Head, Maryland, and all provisions and clauses in effect under FAR/RFO, FAC 2026-01, and DFARS DPN 20260507 apply. The solicitation is the sole source of information and no additional written documents will be issued.
Asphalt Shingle and Coating Materials Manufacturing

POSTED

5 days ago

DEADLINE

in 13 days
View Details
NAICS: 332710
New
Federal
GRAIN SPACERThe Naval Surface Warfare Center Indian Head Division is soliciting quotes for a Grain Spacer under RFQ N0017426Q1071, issued as a total small business set-aside with a NAICS code of 332710 and a size standard of 500 employees. The contract will be awarded on a firm-fixed-price basis using Simplified Acquisition Procedures, with evaluation conducted on a Lowest Price Technically Acceptable basis without discussions. Vendors must submit quotes that strictly adhere to the specified brand and technical requirements in the Statement of Work, and all pricing must include shipping and handling costs. The solicitation incorporates the latest FAR/RFO provisions and DFARS DPN 20260507, and only quotes received by 08:00 AM EST on July 20, 2026, will be considered. Late submissions will be rejected outright. Quotes must be emailed to francine.l.keys.civ@us.navy.mil and include a cover sheet with the company’s official name, point of contact information including name, email, and phone number, and the Unique Entity Identifier and CAGE Code. Questions about the requirement must be submitted by July 20, 2026, and all clarifications will be provided by the same deadline. The primary point of contact is Francine Keys, with Marlene Ridgell also listed for support. The place of performance is Indian Head, Maryland, and the award will go to the responsible small business offering the most advantageous value based on technical compliance and lowest price, with no negotiations permitted after submission.
Machine Shops

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
Federal
LEAD CUPSThe U.S. Navy’s Naval Surface Warfare Center Indian Head Division is seeking quotes for Lead Cups under a firm-fixed-price purchase order using Simplified Acquisition Procedures, with the solicitation limited to small businesses as a total small business set-aside. The NAICS code 332710 applies, with a size standard of 500 employees, and the solicitation number is N0017426Q11103. Evaluation will follow the Lowest Price Technically Acceptable method, where technical compliance is mandatory—quotes must strictly adhere to the specified brand and requirements in the Statement of Work—and price must include all costs such as shipping and handling. Technical drawings are available only upon request via email to designated Navy contacts by 24 July 2026, and ITAR certification is required before access is granted. All quotes must be submitted by 10:00 AM EST on 24 July 2026 via email to the designated address and include a cover sheet with the official company name, point of contact details, Unique Entity Identifier, and CAGE Code. Late submissions will be rejected without exception. Questions must be submitted by 19 July 2026, with responses provided by 21 July 2026. The award will be made without discussions, and only eligible, responsive offers meeting the technical and pricing criteria will be considered. The place of performance is Indian Head, Maryland, and the solicitation incorporates all applicable provisions and clauses under the FAR/RFO, FAC 2026-01, and DFARS DPN 20260507.
Machine Shops

POSTED

5 days ago

DEADLINE

in 12 days
View Details