Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Explosive Application Foam Segments (Canceled)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract was for the manufacture and delivery of 14 specialized foam segments designated by NSN 1560-01-560-2998, intended for use in explosive applications and requiring the application of a burn barrier coating. The work was classified under NAICS code 325920 and issued as a subcontract by the Defense Logistics Agency under the Department of Defense. Despite the technical specifications and delivery requirements being established, the project was canceled due to the unavailability of the specific burn barrier coating material necessary to meet performance standards. No performance location or point of contact was provided, and the solicitation number was not assigned, indicating the contract was likely a direct award or internal action. The contract was posted on July 20, 2026, but no further activity or completion occurred beyond the cancellation notice.

General Info

Contract canceled for 14 foam segments due to unavailable burn barrier coating, no delivery or points of contact provided.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325920 - Explosives ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 14 specialized foam segments (NSN 1560-01-560-2998) for explosive applications, requiring burn barrier coating application. Work canceled due to unavailability of coating material.

Similar Contracts

Same NAICS industry code

1355-01-580-4509 CWQC Flex Hose and Leader Assembly (Improved) with encapsulated lead tape

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month

1356-01-272-2372 5W20 Gas Generator AssemblyThe contract solicitation N0010426RK053 seeks the procurement of 5W20 Gas Generator Assemblies, a classified explosive item designated as a Critical Safety Item, with a base order of 70 units and an option to purchase up to 121% of the FY27 requirement using stepladder pricing structures across quantity ranges of 38–53, 54–69, and 70–85 units. The item, identified by NSN 1356012722372 and NAICS code 325920, is subject to stringent safety and handling protocols requiring a mandatory Safety Survey and full compliance with MIL-STD-1168 for ammunition lot numbering and data card preparation, MIL-STD-130 for unique item identification including enterprise identifiers and serial numbers, and MIL-STD-129 for shipment labeling. All materials must be transported and marked in strict adherence to Title 49 CFR for hazardous and explosive substances, with transportation data updated within 30 days of marking. The contract is a Firm Fixed Price arrangement with a required Cybersecurity Maturity Model Certification (CMMC) compliance and annual affirmation in the Supplier Performance Risk System, alongside flow-down obligations to subcontractors for cybersecurity, quality, and safety standards. The contractor must adhere to ISO-9001:2015 for quality management and implement specific test procedures approved by the government, including first article and production lot testing as detailed in WS26374 and WS256374, with mandatory submission of test plans per DD Form 1423. Deliverables include 7 test samples for production lot verification and a full production lot of 70 units to be shipped to NUWC Division Keyport, WA, under a Government Origin FOB term. All proposals must be submitted electronically in four structured volumes by the deadline of August 26, 2026, and remain valid for 120 days thereafter. The award will be made on a best-value basis, prioritizing past performance—evaluated for quality, timeliness, and small business utilization—over price, which is assessed for reasonableness but not competitively ranked. Offerors must meet a minimum "limited confidence" rating in past performance and comply with extensive representations and certifications via SAM.gov, including those covering defense telecommunications, foreign ownership, and tax exemptions. Invoicing

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

1355-01-387-7738 T107 Suspension Band Set MK89 MOD 1The contract solicitation for the T107 Suspension Band Set MK89 MOD1 with a base quantity of 750 units includes a one-year option to increase the total procurement by up to 80 percent, allowing for potential expansion without requiring a new solicitation. The item is categorized under NAICS code 325920 and is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with performance and administrative responsibilities centered in Mechanicsburg, Pennsylvania. All documentation must be accessed electronically as paper copies will not be provided, and while technical drawings are available for reference, they are not distributed on CD. The solicitation was posted on July 20, 2026, with responses due by August 20, 2026, and no set-aside provisions are in effect, making it open to all qualified offerors. Primary point of contact for inquiries is Alison Maine, reachable via email or phone at the provided office details.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

B1 Parts IDIQThis solicitation, FA8213-26-R-3022, is for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract to procure B1 CAD/PAD parts with an estimated total ceiling value of $23 million. The effort is anticipated to be awarded as a sole source to Chemring Energetic Devices under FAR 6.302-1, citing the specialized nature of the components and the absence of alternative suppliers capable of meeting the technical requirements, though other responsible sources may submit capability statements for consideration. The solicitation has been extended to August 12, 2026, to provide vendors additional time to develop a comprehensive proposal, and administrative clarifications have been made to CLINs 0017, 0019, and 0020. Performance is required at Hill Air Force Base, Utah, with delivery terms set at FOB Origin, Contractor’s Facility, and the contract includes precise requirements for item identification, marking, and packaging in accordance with MIL-STD-130, MIL-STD-129, MIL-STD-2073-1, and other DoD and industry standards, including mandatory application of NSNs, CII, serial numbers, and FSCM codes. All shipments must comply with DD Form 1574/1574-1 labeling, barcoding, and hazardous materials handling protocols, and delivery schedules are defined by line item, with some items requiring delivery 18 months after receipt of order. The contract encompasses extensive technical documentation including over a dozen attachments such as the Statement of Work, Item Descriptions, CDRLs, Packaging Specifications, and Combined SPI, all detailing compliance obligations for ammunition data cards, quality assurance procedures, and production validation. Offerors must meet stringent qualification criteria, submit annual representations and certifications via SAM, and adhere to applicable DFARS clauses related to the Buy American Act, trade agreements, foreign ownership disclosure, and combating trafficking in persons. The contractor is required to implement a qualified quality assurance system, document test and inspection procedures, and facilitate government inspections of production facilities with ten days’ notice. Payment and invoicing must occur through Wide Area WorkFlow (WAWF) with receiving reports compliant with DFARS Appendix F, and clauses addressing government property, pass-through charges, liability limitations, and default are incorporated. The contract includes non-separately priced CLINs for data and CDRL deliverables,

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

First Article Testing of IFBAM SquibThe Naval Surface Warfare Center, Indian Head Division, intends to award a sole source contract to Pacific Scientific Energetic Materials Co California LLC for First Article Testing and procurement of Squib P/N 3703-1 and Refurbishment Kits P/N 2896387 for the Inadvertent Fire Brake Actuator Mechanism, citing proprietary technical data, specialized tooling, and unique expertise held exclusively by PacSci. This action is authorized under 10 USC 3204(a)(1) and FAR 6.302-1 due to the absence of alternative sources capable of meeting the government’s requirements. This notice is not a solicitation, nor does it obligate the government to proceed with a contract; however, all responses will be considered in making the final acquisition decision. The government retains full discretion to determine whether competition is warranted and will not notify respondents of the outcome of this market survey. Interested parties must submit organization details including name, address, point of contact, phone, fax, email, business size, taxpayer identification number, DUNS, and CAGE Code, along with a summary of their capabilities. Responses must be emailed no later than 5:00 pm EST on July 22, 2026, to Erika Cabot, Contract Specialist at NSWC IHD. This acquisition is classified under NAICS code 325920 with no set-aside designation. The office is located in Indian Head, Maryland, and the notice was posted on July 17, 2026, with no commitment or obligation implied by its issuance.

Nswc Indian Head Division

POSTED

DEADLINE

in about 14 hours

MT20 and TY60 Fire Extinguisher CartridgesAmendment 0002 to Solicitation W519TC-26-R-0025 modifies the structure of CLIN 0001 for MT20 fire extinguisher cartridges by splitting it into two separate production lots to better manage manufacturing and delivery timelines. It also authorizes a 26-unit Replacement In Kind shipment to replenish Navy inventory, ensuring operational readiness without introducing new designs. The amendment updates key documentation, replacing the original Price Matrix and Proposed Delivery Schedule with revised versions labeled Rev 1 to reflect adjusted pricing and updated delivery expectations. Formal responses to contractor inquiries are included to clarify requirements and reduce ambiguity. All other terms and conditions of the original solicitation remain in effect. The solicitation pertains to MT20 and TY60 fire extinguisher cartridges under NAICS code 325920, with inquiries directed to Alyson Bigham and Caitlyn Smith at the U.S. Army’s Rock Island, Illinois office, and responses are due by July 22, 2026.

POSTED

DEADLINE

in about 12 hours

1356 - 1356-00-415-6713-TW58 and 1356-01-123-4744 YW09The contract solicitation N0010426RK066 from the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks firm fixed price contracts for two specialized CO2 pressure cylinder assemblies used in Mk46 and Mk54 torpedo systems: TW58 and YW09. The base quantities are 155 units for TW58 and 635 units for YW09, each with a one-year option to increase the order by up to 110% and 100% respectively. Items must be manufactured per specific engineering drawings—7021666 Rev B for TW58 and 7021661 Rev C for YW09—with strict compliance to all associated technical specifications and mandatory identification standards including MIL-STD-130 for unique item identification and MIL-STD-1168 for ammunition lot numbering. All items are designated as critical safety items and must comply with DoD Manual 5100.76 for arms, ammunition, and explosives, requiring DCSA facility access and subcontractor notification within ten days of award. Technical approval authority for any variances or engineering changes rests solely with NUWC Keyport Code N321, and serial numbers are only valid upon its explicit approval. Delivery is structured across multiple contract line items with phased milestones tied to first article test approval, including 12 units for first article testing, followed by incremental production deliveries totaling 700 units across several lots within 180 days of test approval, with a single set of technical data due within 30 days of award. Shipments are directed to NUWC Division Keyport, Washington, under specific FOB terms varying by line item. The contract requires full adherence to ISO-9001:2015 and ANSI/ISO/ASQ Q9001-2008 quality systems, with 100% inspection for critical characteristics and defined AQLs for major and minor characteristics under MIL-STD-105/MIL-STD-1916. Electronic invoicing must be performed via Wide Area WorkFlow (WAWF), and the contractor must maintain CMMC Level 2 compliance for handling controlled unclassified information. Evaluation for award prioritizes past performance as a mandatory pass/fail gate requiring at least limited confidence, followed by small business participation, with price being the least weighted factor. All proposals must be submitted

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Flexible Confined Detonating Cords (MS91/MS92)The contract seeks to procure Flexible Confined Detonating Cords designated as MS91 and MS92 under a two-year, Firm Fixed Price Indefinite Delivery/Indefinite Quantity (IDIQ) agreement, with specific National Stock Numbers and part numbers identified for compliance. This procurement is limited to qualified sources authorized under 10 U.S.C. 3204(a)(1) and corresponding FAR provisions, requiring offerors to submit a valid Qualification Acceptance Letter or government-approved equivalent verified by an authorized Government engineer to be considered for award. The solicitation number is W519TC26R0026, posted on July 16, 2026, with responses due by August 17, 2026, and is governed under NAICS code 325920. The responsible agency is the Department of Defense, specifically the W6QK Acc-Ri office located in Rock Island, Illinois, and all performance will be managed under its oversight. Primary and secondary points of contact are provided for inquiries, with email and phone details listed for Caitlyn Smith and Aly Bigham. The contract will be awarded through a restricted competition process, ensuring only pre-qualified vendors can respond, in alignment with national security and supply chain control protocols.

POSTED

DEADLINE

C17 FEC PartThe solicitation FA8213-26-R-3054, titled "C17 FEC Part," is a streamlined trade-off competition conducted under FAR Part 13, utilizing the structure of Sections L and M for organizational clarity but not adhering to full competitive procedures of higher acquisition thresholds. The contract aims to establish a reliable source for the supply and sustainment of Cartridge Actuated Devices and Propellant Actuated Devices, classified as Critical Safety Items, to support military aircraft emergency egress systems at Hill Air Force Base, Utah. Offers must be submitted electronically via email to Tyson Tharp at tyson.tharp@us.af.mil by 9:00 PM on August 14, 2026, with submissions exceeding 10MB requiring either multiple emails or a pre-requested DoD SAFE link. The evaluation is based on a best-value trade-off approach, where the Technical factor—comprising qualified vendor status and schedule performance—is significantly more important than price, with technical risk assessed using Low, Moderate, High, and Unacceptable ratings. Award will go to the most advantageous offer after integrated assessment of technical merit and cost, not the lowest price technically acceptable. Performance requirements include strict compliance with military packaging and marking standards such as MIL-STD-2073-1, MIL-STD-129R, MIL-STD-130 for UID labeling, and adherence to DOT, IATA, ICAO, and ISPM 15 regulations for hazardous materials and wood packaging. Delivery must occur at Hill Air Force Base, Utah, with the contractor responsible for proper labeling, hazardous material documentation, and submission of electronic schedules and reports in editable MS Office formats. All proposals must include a Work Breakdown Structure, realistic schedule, and compliance evidence, limited to no more than 10 pages for the schedule component. While the solicitation references mandatory clauses and attachments such as SF-1447 and SAM-linked documents, specific contract clauses, pricing line items, accounting codes, payment details, and completed representations are not fully provided and are presumed to be contained in supplementary documentation not accessible through the public posting. Offerors are solely responsible for ensuring timely delivery of submissions and are strongly encouraged to request email acknowledgment from the Contracting Officer.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

1355 - 01-620-4752 CWRT DISPENSER ASSEMBLY, WIRE, MK8 MOD 3The solicitation N0010426RK028 seeks the procurement of the CWRT Dispenser Assembly, Wire, MK8 Mod 3 with NSN 1355-01-620-4752-CWRT, a specialized component for military use, to be manufactured per detailed technical specifications including drawings such as 8555076, 2500838, 2642742, and others. The contract is structured as a Firm Fixed Price arrangement encompassing technical data, first article testing, production lot testing, and production units of the dispenser assembly, with delivery schedules ranging from 30 to 360 calendar days post-award or first article approval, depending on the line item. Deliveries are directed to NUWC Division Newport and the Navy Submarine Torpedo Facility in Yorktown, VA, with FOB terms varying between contractor destination and government origin. The item is classified with a Controlled Inventory Item Code of 7 and must comply with Title 49 CFR for hazardous materials, MIL-STD-130 and MIL-STD-129 for unique item identification and shipment markings, and ASTM-D5486 and MIL-PRF-131 for packaging materials. Serial numbers are mandatory, and all items must be machine-readable and verified using standards aligned with Appendix A of MIL-STD-130. The contract imposes stringent compliance and quality requirements, mandating adherence to ISO-9001:2015 and flow-down of these standards to subcontractors for critical items. Quality assurance is government-led at the contractor’s facility, with inspection and testing governed by MIL-STD-1916 at Inspection Level II and defined AQLs: 100% for critical characteristics, 1.0 for major, and 2.5 for other characteristics. A test plan must be submitted within 30 days of award for government approval, and configuration non-conformances must follow EIA-649-B with approvals routed through NUWC-NPT Code 8554. Cybersecurity obligations align with NIST SP 800-171, requiring protection against malicious code, regular system scanning, and timely correction of system flaws. The contractor must use Wide Area Workflow (WAWF) for invoicing, report Unique Item Identifiers at delivery, and comply with multiple federal regulations including Buy American, anti-k

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Engine Starter CartridgeThe United States Government is seeking to acquire Engine Starter Cartridges under a firm-fixed price contract for use in USAF AGM-86 Air Launched Cruise Missiles, with the solicitation numbered FA821326R3047 issued by the Department of Defense through the FA8213 Aflcmc Ebhk office located at Hill AFB, Utah. The solicitation was posted on July 15, 2026, and responses are due by August 15, 2026, with the North American Industry Classification System code 325920 indicating the relevant manufacturing category. Prospective vendors must meet specific qualification requirements outlined in the JQR documents attached to the solicitation to be considered a technically acceptable source for award; failure to comply with these qualifications will disqualify a bid regardless of price competitiveness. The contract is open to interested parties, though the government retains the right to withhold solicitation issuance without notice. All inquiries should be directed to the primary point of contact, Jesse Whinham, or secondary contact Linna Wu, using the provided phone numbers and email addresses. Performance is expected to be fulfilled under the ZIP code 95023, though the exact location is unspecified.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

Solicitation B2 Ctg Cad/Pad PartThis solicitation, FA8213-26-R-3052, issued by the Department of Defense through the FA8213 Aflcmc Ebhk office at Hill Air Force Base, Utah, seeks suppliers for Cartridge Actuated Devices and Propellant Actuated Devices (CAD/PAD), classified as Critical Safety Items, to support aircraft egress systems. The contract requires full compliance with stringent military packaging and marking standards including MIL-STD-2073-1, MIL-STD-129, MIL-STD-130, and AFMCI 24-201, with specific requirements for Unique Item Identification using Data Matrix ECC 200 barcodes and mandatory inclusion of Manufacturer’s Part Number, Serial Number, Lot Number, and Julian Date of Manufacture. All items must be packaged to protect electrostatic sensitive devices using ANSI/ESD S20.20 compliant materials and labeled accordingly, while hazardous materials such as Line Item 0001 (NSN 1377-01-521-3457 ES) must adhere to DOT Class 1.4S and UN0173 shipping regulations under 49 CFR Parts 100-185. The acquisition is unrestricted with NAICS code 325920 and requires offerors to be pre-qualified sources, with new applicants submitting detailed qualification packages prior to award. Proposals must be submitted by July 7, 2026, and are subject to evaluation under a best value source selection process where technical merit significantly outweighs price, though both factors are integral. The technical evaluation focuses on the offeror’s qualified vendor status, technical approach, quality control procedures, work breakdown structure, and realistic scheduling with defined milestones, all to be submitted in searchable digital formats compliant with Adobe Acrobat, Microsoft Word, and Excel. Pricing must be reasonable and supported by cost or pricing data per FAR provisions, with payment processing mandated through the Wide Area Workflow (WAWF) system using designated DoDAACs and document types based on CLIN structure. Contract administration requires adherence to numerous FAR and DFARS clauses, including provisions for changes, termination, bankruptcy, disputes, and liability limitations, with additional compliance obligations under NIST SP 800-171 for cybersecurity and CUI protection, Buy American Act requirements, Defense Priorities and Allocations System, and Organizational Conflict of Interest rules. All deliverables

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

CAP, AIRThis contract, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-3638, pertains to the procurement of one unit of material identified by NSN 3433-01-158-0436, with a required delivery within five days of award. The item is to be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including specific hazardous material handling per FED-STD-313 and TQ requirement IP025 if applicable. Mercury and mercury-containing compounds are strictly prohibited except for defined functional uses such as batteries, fluorescent lights, sensors, or reagents approved by NAVSEA, with additional containment requirements for portable devices. The shipment is to be sent to a designated SSA location in Kaiserslautern, Germany, with transportation governed by DLA procedural notes C19 and C20. The contract includes restrictions on covered defense information and mandates compliance with supplier documentation standards including Source Approval Requests and removal of government identification from non-accepted items. The original required delivery date is June 11, 2025, and the point of contact is Ira Hedgepeth at DLA.

Welding and Soldering Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

HEATER, FLUID, INDUSTThis contract is for the procurement of one fluid heater, industrial model, identified by NSN 4420014299920 and part number 5-131-08-030-002 from Fluid Handling LLC, with a total quantity of ten units to be delivered within five days of award. The item is covered under solicitation SPE8E8-26-T-4771, which is a total small business set-aside under NAICS code 332410, and is managed by the Defense Logistics Agency. Delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all packaging must be marked and labeled appropriately with the specified unit of issue and quantity per unit pack. The contract explicitly prohibits intentional addition of mercury or mercury-containing compounds to the hardware or its components, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and maintain a secondary containment barrier per NAVSEA 5100-003D. Shipment is directed to the U.S. Army SSA W58MKR facility in Zaczernie, Poland, and must follow DLA procedures C19 and C20 for transportation and first destination transfer. The item must be delivered by July 22, 2026, and is associated with RDD code E and project code 3BI TP 1. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Contract data indicates the primary point of contact is Alexis Selby, with the solicitation posted on July 21, 2026, and responses due by August 3, 2026. The purchase request number 7017559823 references this line item, with unit price and total cost not itemized but implied through total quantity and contractual obligations. Government use identifiers and distribution codes are provided for internal tracking purposes.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 14 hours ago

DEADLINE

PLATE, INSTRUCTIONThe contract pertains to the procurement of two instructional plates identified by NSN 9905-01-515-8353 under solicitation SPE8E6-26-Q-0579, with a firm delivery deadline of 90 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. Drawings associated with this item are accessible only during the open solicitation period via the DIBBS portal. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless otherwise directed. Compliance with zero defect acceptance is mandatory unless explicitly waived. Technical data associated with this item is subject to export control under ITAR or EAR, and its disclosure to foreign persons, including within the United States, is strictly prohibited without prior authorization. Access to controlled technical data is restricted to contractors with valid US/Canada Joint Certification Program certification, completed DOD export control training, and explicit approval from DLA. The point of contact for the solicitation is Kathleen Selover, reachable via email and phone listed in the contract data.

Plate Work Manufacturing

POSTED

about 14 hours ago

DEADLINE

MARKER, IDENTIFICATIONThe contract pertains to the procurement of identification markers, specifically for a Type I shelf-life item with a 12-month non-extendable shelf life, under the Defense Logistics Agency’s procurement requirements. The item must be supplied by either LABELMASTER CO. or AMERICAN LABELMARK COMPANY with the respective part numbers PL-18 or HML13, and must comply with MIL-STD-129 for labeling, including shelf-life markings in calendar quarter and year format, with the expiration date set exactly one year from the cure date. At least 85% of the item’s shelf life must remain at the time of delivery. Packaging must conform to MIL-STD-2073-1E, with clear marking specifications and avoidance of plastic materials for wrapping, cushioning, or dunnage whenever feasible. The unit of issue is RO (1,666 feet), with a total quantity of one RO required, and delivery is due within 20 days of contract award, FOB origin. Inspection and acceptance occur at destination, and no variance in quantity is permitted. The item is destined for W8002F, a military facility located in Comayagua, Honduras, and must be shipped via traceable means, with parcel post prohibited. The delivery address, mark for address, and freight shipping address are identical, and the point of contact is Jennifer Roome of the Defense Logistics Agency. The solicitation number is SPE8E6-26-T-3765, with an original required delivery date of July 17, 2026, and responses are due by August 3, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, and compliance with all applicable codes and standards including MIL-STD-129 is mandatory. The contract includes government use codes, project information, and a National Stock Number of 7690-01-242-4556, with the North American Industry Classification System code 323117 identifying the industry standard for the item.

POSTED

about 14 hours ago

DEADLINE

TANK, OIL DRAIN, COMPThe contract is for one oil drain tank, part number 366-20263 and NSN 4130-01-230-8549, under solicitation SPE8E8-26-T-4770, issued by the Defense Logistics Agency. Delivery is required within five days of award, with shipment destined for the Carrier Outfitting Material Support Center in Suffolk, Virginia. The item must be furnished FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, with strict instructions to avoid plastics where possible. The item must not contain intentional mercury or mercury compounds except in specific permitted applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents, and any portable mercury-containing devices must be shock-proof with secondary containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation or award date. A unique shipment identifier RDD 777 requires tracking via the fastest traceable means and prohibits parcel post. The technical data package is not approved by DLA Troop Support, and no request for it should be submitted. The contract includes specific freight and parcel post addresses, a government-only identification code, and a required delivery date of July 20, 2026, with a response deadline of August 3, 2026.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

BRACKET, LIGHT RETENThe contract pertains to the procurement of 40 units and 140 units of a light retention bracket, identified by NSN 6220-01-631-4413 and part number 2614833C1, under solicitation SPE8E7-26-T-3370. Delivery is required within five days of shipment, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, with all packaging and labeling strictly governed by MIL-STD-129 and DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, while hazardous materials must comply with TQ requirement IP025 per FED-STD-313. Palletization must adhere to RP001 DLA Packaging Requirements, and each unit pack must contain exactly one item. The items are to be delivered to the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment tracked via RDD E and referenced DLA procedural notes. The first delivery is due by July 21, 2026, and the second by July 22, 2026, with unit prices of $40.00 and $140.00 respectively, totaling $2,000 and $19,600. The contract references mandatory technical and quality standards from the DLA Master List accessible online, and all documentation and unit of issue compliance must align with DoD standards as defined in official DLA resources.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

DECONTAMINATING APPThis contract is for the procurement of one unit of a decontaminating apparatus identified by NSN 4230-01-593-2297 and part number T00416-5083, classified as a commercial item with a non-extendable shelf life of 12 months as a Type I (Code H) item. The item must comply with strict material restrictions including the absolute prohibition of asbestos per FED-STD-313 and the intentional exclusion of mercury or mercury-containing compounds, except in specified functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and certain chemical reagents defined by NAVSEA, with portable mercury-containing devices required to have shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. The item is designated as a critical application item and must be packaged in compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, including the special marking code 32 for shelf life, with palletization adhering to DLA packaging requirements. Delivery is required FOB origin within 20 days of contract award, with zero tolerance for quantity variance, inspection and acceptance occurring at the destination. The item must be delivered to the Distribution Management Office at Building 1710, Iwakuni, Japan, under contract SPE8E6-26-T-3774, with the original required delivery date set for July 17, 2026. Compliance with DLA’s Master List of Technical and Quality Requirements, including specific references such as RP001, RQ011, RD003, and RC001, is mandatory, along with adherence to all documentation and source approval protocols. Transportation is governed by DLAD procedural notes C19 and C20, and all markings, packaging, and unit of issue must conform to specified DoD and ANSI X12 standards. The contract is managed under a federal procurement system with government-only access details and is part of a larger expeditionary system requirement supported by HDT Expeditionary Systems Inc.

Plate Work Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGEThis contract specifies the procurement of six calcium maintenance-free shelf-life Type I batteries with a non-extendable 12-month shelf life, supplied by East Penn Manufacturing Co. under part number 11U1L and NSN 6140017178541. The batteries must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including MIL-STD-129 marking and palletization standards. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned verification levels or AQLs as defined. Mercury or mercury-containing compounds are strictly prohibited except in functional applications like batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents. The items will be delivered FOB destination within 20 days of contract award to Camp Pendleton, California, with no quantity variance allowed and inspection and acceptance also occurring at destination. Shipment must use traceable freight methods, not parcel post, and special marking codes are not required. The contract is issued under solicitation SPE7L7-26-T-4391 with a required delivery date of July 13, 2026, and response deadline August 3, 2026, under NAICS code 335910 and managed by the Defense Logistics Agency.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

INNER TUBE, PNEUMATIThis contract is for the procurement of four pneumatic inner tubes, part number 323111, with NSN 2610-01-611-7825, supplied by Carlisle Tire & Wheel Co under solicitation SPE7L7-26-T-4385. The item is classified as TYPE I with a non-extendable 60-month shelf life, and the use of any Class I ozone-depleting chemicals is strictly prohibited, requiring approved substitutes if necessary. Delivery is required within 20 days to Ellsworth Air Force Base, South Dakota, FOB destination, with inspection and acceptance occurring upon arrival and no quantity variance allowed. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special marking indicating Type I shelf-life status, and palletization adhering to DLA packaging requirements. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with zero non-conformances required unless otherwise specified. The contract references DLA’s Master List of Technical and Quality Requirements for all applicable technical and quality standards. Shipment must be sent via the fastest traceable means, excluding parcel post, and all documentation aligns with DoD unit of issue and procurement protocols. The original required delivery date is July 17, 2026, and the point of contact is Molly Teegarden of the Defense Logistics Agency.

Tire Manufacturing (except Retreading)

POSTED

about 14 hours ago

DEADLINE

BATTERY POWER SUPPLYThis contract specifies the procurement of a sealed lead acid battery with a Type I shelf life of 12 months, non-extendable, classified as a commercial off-the-shelf item with available catalog data for evaluation of alternatives. The battery must comply with strict hazardous material regulations, prohibiting intentional addition or direct contact of mercury or mercury-containing compounds, except for functional use in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a second boundary of containment as defined by NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise stated. Packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating Type I shelf life, and palletization governed by DLA packaging requirements. The item is to be delivered FOB origin within 10 days, with no quantity variance allowed, inspected and accepted at destination. Shipment must use the fastest traceable means, excluding parcel post, to the designated military address in Carlisle, PA, with no delivery date earlier than July 10, 2026. The contract is issued under solicitation SPE7L7-26-T-4383 by the Defense Logistics Agency and identifies the NSN 6130-01-418-5230 for a single unit at a total price of one dollar.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 14 hours ago

DEADLINE

FLOODLIGHT, ELECTRICThe contract is for the procurement of 10 electric floodlights with NSN 6230-01-717-5158, sourced from BAYCO PRODUCTS INCORPORATED DBA 3GLY4 under part number NSR-2166R. Delivery is required within 20 days of contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s mandatory packaging requirements, specifically RP001 and MIL-STD-129, superseding ASTM D3951 if applicable. Hazardous material handling follows FED-STD-313 and TQ requirement IP025 if applicable. Items must be shipped via traceable means, excluding parcel post, to the specified delivery point at 7105 NW 70th Ave, Johnston IA 50131-1824, with clear labeling per government directives including traceable markings and the designated military freight code. The product must meet all technical and quality standards enumerated in the DLA Master List of Technical and Quality Requirements, referenced in the solicitation, and documentation requirements for source approval are integral to compliance. The solicitation number is SPE8E7-26-T-3368, with a response deadline of August 3, 2026, and the original required delivery date is July 17, 2026. Contract administration is managed by the Defense Logistics Agency, with Kelly Mitchell as the primary point of contact.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGEThe contract specifies the procurement of 6140-01-457-4206, a 12-volt wet-charged lead acid battery classified as corrosive by the Department of Transportation and shipped under the name "Battery, Wet, Filled with Acid." It is a Type I shelf-life item with a strict non-extendable 3-month shelf life, requiring packaging and marking in compliance with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for shelf-life designation. All shipments must adhere to DLA packaging requirements RP001 and hazardous materials packaging standard IP025, using only U.S. Department of Transportation-compliant 4G UN-certified fiberboard containers; commercial packaging is strictly prohibited. The contractor must ensure staff are trained and certified per Title 49 CFR for handling, marking, labeling, and documenting hazardous materials, and must include valid Safety Data Sheets confirming regulatory compliance. The product must not contain intentionally added mercury except for functional uses in batteries, and portable fluorescent lamps or instruments containing mercury must have shockproof design and secondary containment per NAVSEA standards. The contract mandates a Firm Fixed Price structure with zero tolerance for quantity variance, delivery within 60 days after award, and inspection and acceptance occurring at the destination. Three separate deliveries of two batteries each are required, shipped to distinct U.S. military addresses in Pennsylvania and Puerto Rico, with shipments traceable and never via parcel post. Each delivery has an associated RDD and project code with unique routing identifiers, and the batteries are sourced from East Penn Manufacturing Co. under part number 7T31. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and verification levels for attributes are fixed as VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract explicitly excludes any non-compliant materials or packaging, enforcing full adherence to federal hazardous materials regulations and government-specific logistics protocols.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE