Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing Services for Electron Tubes

Active

Federal

Response Deadline09/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the performance of First Article Testing for electron tubes under NSN 5960-01-472-9115 to support prime contractors delivering DLA supply contracts. The selected provider will use specialized electronic performance validation equipment to ensure the first unit meets all technical specifications and the DLA Master List of Technical and Quality Requirements. The scope of work requires the delivery of a comprehensive First Article Test Report and one validated test unit. This project is managed by the Department of Defense under the Maritime Supply Chain agency, with performance taking place in Tracy, California. The opportunity falls under NAICS code 541380.

General Info

Subcontract for First Article Testing of electron tubes in Tracy, California for DLA.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-26-Q-1499.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ELECTRON TUBE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 21

subcontract

Response DeadlineSep 24

Submission deadline

Response Deadline

09/24/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors delivering DLA supply contracts. Conducts testing on the first unit of NSN 5960-01-472-9115 to validate performance against technical specifications and the DLA Master List of Technical and Quality Requirements. Utilizes specialized electronic performance validation equipment. Delivers a First Article Test Report and one validated test unit.

Similar Contracts

Same NAICS industry code

AMD 001-Questions and Responses 36C25626Q1337- Heterotrophic Plate Count (HPC) Waterline Testing Services, Biloxi, MS, Pensacola, FL and Panama City Beach, FL

Solicitation # 36C25626Q1337

The Department of Veterans Affairs is conducting market research to identify qualified firms for routine and surge Heterotrophic Plate Count testing of potable waterlines at facilities along the Gulf Coast, specifically in Biloxi, Mississippi, and Pensacola and Panama City Beach, Florida. The goal is to ensure water quality monitoring adheres to Standard Methods 9215 and CDC and EPA guidelines. Selected contractors must hold relevant state certifications and ISO/IEC 17025 accreditation, provide all necessary sampling logistics, and maintain strict hold times of 24 hours or less for analysis. The government is seeking capability statements from small businesses, including SDVOSB and VOSB, as well as GSA Multiple Award Schedule holders under SIN 541380. Requirements include a 48-hour reporting turnaround, the ability to handle emergency surge capacities, and consistent methodology to ensure trend comparability. Interested parties must submit their capability statements, including certification and pricing information, by September 23, 2026.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 2 hours ago

DEADLINE

New Car Assessment Program (NCAP) Pedestrian Impact Testing

Solicitation # 693JJ926R000073

The National Highway Traffic Safety Administration (NHTSA) is seeking multiple awardees under an indefinite-delivery, indefinite-quantity (IDIQ) contract to perform pedestrian protection impact testing on production motor vehicles. The scope of work includes test-procedure evaluation, impactor qualification, and the execution of headform, Flexible Pedestrian Legform Impactor (Flex-PLI), and upper-legform tests in accordance with US and European NCAP Crashworthiness Pedestrian Protection Test Procedures. Additionally, the contract covers optional cyclist and aPLI testing, as well as active hood sensing tests. Deliverables include detailed NCAP test reports, vehicle condition reports, and quality control packages, with specific timelines for data submission and reporting. Award will be made on a best-value tradeoff basis, where technical factors are deemed more important than price. The evaluation focuses on four equal technical factors: the technical and quality assurance management plan, facilities and equipment, organization and personnel qualifications, and past performance. The contract utilizes firm-fixed-price and cost-reimbursement task orders. Contractors must adhere to strict calibration and qualification standards for test devices and maintain compliance with federal security and privacy protections. Invoicing is processed electronically through the Delphi web-portal, with payments typically issued 30 days after the receipt of a proper voucher.

693JJ9 Nhtsa Office Of Acquistion

POSTED

about 2 hours ago

DEADLINE

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking qualified small and disadvantaged business firms to serve as a subconsultant for the City of Hemet's Oakland and Santa Fe Waterline Replacement project (CIP 5661). The scope of work involves providing geotechnical and materials inspection and testing services over an anticipated 210 construction working days. Key responsibilities include material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottoms, as well as initial sampling, acceptance testing, and the preparation of a certification memorandum signed by a professional engineer to identify any non-complying materials. The project is funded in whole or in part by a U.S. Environmental Protection Agency Community Grant, requiring strict adherence to federal flow-down provisions, including 40 CFR Part 33 Disadvantaged Business Enterprise (DBE) requirements, 2 CFR Section 200.321 procurement standards, and the Build America, Buy America Act. Selected firms must comply with California prevailing wage laws under Labor Code Section 1770 and maintain registration with the Department of Industrial Relations. Subcontract award is contingent upon the selection of Albert A. Webb Associates by the City of Hemet. Interested firms must provide a technical proposal, fee proposal, and proof of small or disadvantaged business certifications.

Albert A. Webb Associates

POSTED

about 10 hours ago

DEADLINE

Chemical Analytical Services For Wastewater Treatment Plant and Environmental Monitoring Programs

Solicitation # 26-0369

The Greater Vancouver Regional District, operating under Metro Vancouver in the Province of British Columbia, is seeking chemical analytical services to support its wastewater treatment plant and environmental monitoring programs. This solicitation, identified by number 26-0369, is designed to secure professional laboratory services necessary for maintaining environmental compliance and operational efficiency within the region. Interested parties must submit their responses by the deadline of October 19, 2026. The contract is focused on performance within British Columbia, and further details regarding the submission process can be accessed through the BC Bid portal.

Greater Vancouver Regional District (Metro Vancouver)

POSTED

about 16 hours ago

DEADLINE

Pipeline Pressure Testing and InspectionThis subcontract for Pipeline Pressure Testing and Inspection involves performing hydrostatic pressure testing and weld and joint inspections for prime contractors on Jackson County Port Authority projects. The scope of work includes executing pressure testing and leak detection on 24 inch and 42 inch lines, as well as certifying the interconnection using high pressure pumps, gauges, and testing manifolds. The selected provider must be a certified pipeline inspector or hold a Professional Engineering certification to deliver the required pressure test reports and certification of interconnection integrity. This opportunity is managed by the Mississippi Department of Finance and Administration under NAICS code 541380, with a response deadline of September 22, 2026.

POSTED

about 20 hours ago

DEADLINE

in about 4 hours

First Article Testing (FAT) and Ballistic CertificationThis subcontract opportunity is for the performance of Contractor-Performed First Article Testing and ballistic certification to support prime contractors on DLA Land and Maritime supply contracts. The scope of work involves executing ballistic impact testing and quality assurance validation utilizing a specialized testing range and standardized munitions. All deliverables must include formal test reports adhering to the DI-NDTI-80809B format and FAR 52.209-3 standards. The project is designated as a Total Small Business Set-Aside under NAICS code 541380 and is managed by the Department of Defense Land Supply Chain agency. Performance will take place in Tracy, California. Interested parties must submit their responses by October 21, 2026.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services supports prime contractors on projects for the Department of Defense ASC Commodities Division. The selected provider will perform specialized testing on production lot samples using multimeters, continuity testers, and insulation resistance testers to ensure results meet specific TDP tolerances. The scope of work includes the generation of formal test reports signed by a Quality Assurance Representative and the delivery of both the tested samples and comprehensive reports. The performance of these services is located in Texarkana, Texas, under NAICS code 541380, with a response deadline of September 28, 2026.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

First Article Testing (FAT) and Certification ServicesThis subcontract, titled First Article Testing (FAT) and Certification Services, is issued by the Department of Defense Land Supply Chain as a total small business set-aside under NAICS code 541380. The contractor is responsible for performing ballistic and quality testing for prime contractors on DLA and Army armor projects to certify manufacturing processes. This involves conducting Contractor First Article Tests in accordance with FAR 52.209-3 using standardized projectiles and ballistic testing ranges. The contractor must document all findings using the DI-NDTI-80809B report format. Final deliverables include signed FAT reports and system of record receiving reports, which are to be submitted via WAWF or DD Form 250. The solicitation was posted on September 21, 2026, with a response deadline of October 20, 2026.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

First Article Testing and Quality ValidationThis subcontract for the Department of Defense ASC Commodities Division involves performing independent testing and quality validation of first production units for prime contractors on DLA supply contracts. The selected provider will conduct First Article Tests per CLIN 0002 and execute zero-based sampling plan inspections against the DLA Master List of Technical and Quality Requirements using precision electronic measurement equipment. The performance of these services will take place at Tinker AFB. To be eligible, the contractor must hold ISO 9001 or SAE AS9003 certification and is responsible for delivering all certified test reports and validation documentation. The response deadline for this opportunity is September 28, 2026.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test (FAT) Services involves the initial testing and validation of cartridge lamps for prime contractors under DLA Aviation supply contracts. The selected provider must coordinate testing in accordance with FAR 52.209-4 using specialized laboratory equipment to validate lamp specifications, ultimately delivering a certified First Article Test report and an approved sample unit for government approval. The opportunity is issued by the Department of Defense under the ASC Commodities Division with a performance location in Greensboro, North Carolina. It falls under NAICS code 541380, with a response deadline set for September 28, 2026.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Third-Party Quality Assurance and Source Inspection

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Asbestos Bulk Material Sampling and TestingThe Asbestos Bulk Material Sampling and Testing subcontract involves performing environmental sampling and laboratory analysis of bulk materials for prime contractors working on Worcester Housing Authority projects. The scope of work requires conducting sampling of various building components and utilizing certified laboratory facilities to identify asbestos content. Upon completion of the testing, the contractor is responsible for delivering detailed environmental reports that outline the specific results of the bulk material analysis. This subcontracting opportunity is managed by the Worcester Housing Authority Purchasing department in Massachusetts. Interested parties must submit their responses by the deadline of October 6, 2026. The contract is classified under NAICS code 541380 and involves performance at the Worcester location. All technical procedures must be executed using appropriate environmental sampling tools to ensure accurate identification and reporting of hazardous materials.

WHAPURCHASING - Purchasing

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Supply of JANTX1N2829B Semiconductor DiodesThis subcontract involves the supply of 50 JANTX1N2829B semiconductor diodes for prime contractors supporting Defense Logistics Agency supply contracts. The components must align with NSN 5961010239458 and require full supply chain traceability in accordance with DLAD Procurement Note C03. Performance is based in New Cumberland, Pennsylvania, under the oversight of the Department of Defense Maritime Supply Chain. The provider must adhere to several rigorous technical and quality standards, including MIL-STD-129, IPC/JEDEC J-STD-609, MIL-DTL-19491, and MIL-STD-2073-1E. Additionally, a CMMC Level 2 self-assessment is required to ensure cybersecurity compliance. The final delivery must include all 50 units along with comprehensive traceability and quality documentation.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of Electron Tubes (NSN 5960-01-472-9115)This subcontract involves the supply of 13 electron tubes, identified by NSN 5960-01-472-9115, for prime contractors fulfilling DLA supply contracts under the Department of Defense Maritime Supply Chain. The provider must ensure all units adhere to the DLA Master List of Technical and Quality Requirements and comply with Federal Standard No. 313 regarding hazardous materials. To be eligible, the contractor must possess a valid CAGE code and maintain compliance with NIST SP 800-171. Delivery of the items is to be managed through the Vendor Shipment Module, with the place of performance located in Tracy, California. The response deadline for this opportunity is September 24, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of Specialized Knobs (NSN 5355003214678)This subcontract with the Maritime Supply Chain under the Department of Defense involves the delivery of 130 units of specialized knobs, identified by NSN 5355003214678. The items must be manufactured or procured in strict accordance with the current Source Control Drawing and Engineering Support Activity technical specifications. Performance will take place at Robins Air Force Base, and the contractor may utilize additive manufacturing to meet the requirements. To ensure quality and compliance, any non-approved sources must receive OEM source approval. The contract falls under NAICS code 332999 and was posted on September 21, 2026, with a response deadline of September 24, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE7M1-26-U-6590

Fluid Power Pump and Motor Manufacturing

POSTED

about 21 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M1-26-U-6268

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

HOLDER, ELEMENT, FILTER-

Solicitation # SPE7M1-26-U-6635

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE7M1-26-U-6257

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

PUMP UNIT, ROTARY

Solicitation # SPE7M1-26-U-6238

Fluid Power Pump and Motor Manufacturing

POSTED

about 21 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M1-26-U-6496

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

ROTOR, AIR COMPRESSOR

Solicitation # SPE7M1-26-U-6325

Air and Gas Compressor Manufacturing

POSTED

about 21 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE7M1-26-U-6668

Welding and Soldering Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

ANODE, CORROSION PREVEN

Solicitation # SPE7M1-26-U-6832

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS