This Solicitation opportunity from Department Of Defense was posted on July 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

FITTING

Closed

N0040626Q0399Federal

Submission Closed08/07/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332919

New

SLED

Butterfly Valves & Fittings

Solicitation # 8936

The City of Waterbury is seeking sealed bids for the procurement of butterfly valves and fittings under bid number 8936. This invitation to bid is currently open, with a clarification deadline set for September 18, 2026, at 2:00 PM. All bids must be submitted to the office of the Director of Purchasing at City Hall, 235 Grand Street, Waterbury, CT 06702, by the deadline of 11:30 AM on September 29, 2026. Bids will be publicly opened and read aloud at that time, and no submissions will be accepted after the specified cutoff. For further inquiries, the primary point of contact is mmccauley@waterburyct.org.

POSTED

DEADLINE

47--REPAIR KIT,PIPE,EME

Solicitation # SPE7M3-26-T-9062

This contract is for the procurement of 128 emergency damage control pipe repair kits, identified by NSN 4730-01-414-6976 and part number BV-USA-2. The order is a total small business set-aside issued by the Department of Defense Fluid Handling Division, with a required delivery date of September 17, 2026, and a delivery window of 57 days after order. Shipping is FOB origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Suppliers must adhere to strict packaging and marking standards, including MIL-STD-2073-1 and MIL-STD-129. Because the materials are classified as hazardous, contractors are required to submit Safety Data Sheets and Hazardous Communication Standard labels for approval prior to the award. Additionally, the supplier must ensure employees are trained on the current OSHA hazard communication requirements and comply with DLA packaging requirements for procurement.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010426QFF42

This solicitation is for the procurement of a Straight Tailpiece (piece 73), designated as Special Emphasis material due to its critical role in shipboard systems where failure could result in serious injury or loss of the vessel. The contract requires the use of ASTM-B369 UNS C96400 material and mandates rigorous quality controls, including hydrostatic testing, dye penetrant inspection, and radiography. All internal threads must be cut rather than cold-formed, and the contractor must adhere to strict DPAS DO-rated priority and Buy American standards. The delivery process involves a phased schedule including the submission of Radiographic Shooting Sketches and Production Radiography for approval prior to final delivery, which must occur within 365 days of the contract effective date. Documentation and certifications must be submitted via Wide Area Workflow (WAWF) to Portsmouth Naval Shipyard. The contract emphasizes strict configuration control, requiring formal Engineering Change Proposals for any modifications and a comprehensive certificate of compliance for all delivered items.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-6631

This contract, solicitation number SPE7M8-26-T-6631, is issued by the Department of Defense Electrical Devices Division for the procurement of 46 pressure switches, identified by NSN 5930-01-410-9221 and Detroit Switch Inc part number 222-10NB16-2223676. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is January 11, 2027, with a delivery window of 75 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific prohibitions against the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Configuration change management and engineering change proposals are required for any variances, and the contract specifies that government identification must be removed from any non-accepted supplies.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Solicitation # N0010426QFD90

This firm fixed price solicitation is for the refurbishment of a control valve, designated as Special Emphasis SUBSAFE/Non-Level I material due to its critical role in shipboard systems. The contract requires the prime contractor to be the original equipment manufacturer and mandates that all work be performed according to specific NAVSEA approved procedures and technical data packages. Key requirements include strict adherence to quality systems such as ISO-9001, the application of unique serial numbers for traceability, and the submission of comprehensive certificates of compliance and test reports for non-destructive and hydrostatic testing. The agreement emphasizes rigorous quality assurance, requiring government source inspection and the approval of all welding and brazing procedures prior to execution. It establishes a strict configuration control process where any waivers, deviations, or engineering change proposals must be reviewed and approved by the contracting officer. All certification data and final documentation must be submitted via Wide Area Workflow for review and acceptance by the Portsmouth Naval Shipyard before any material is shipped.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

FPAIC AUGMENTATION PARTS

Solicitation # FA527026QA058

POSTED

DEADLINE

VACUUM BREAKER ASSY — 4820015535794 — SPRMM126QGF68

Solicitation # SPRMM126QGF68

This solicitation, issued by DLA Mechanicsburg, seeks the manufacture and supply of a Vacuum Breaker Assembly. The contract will be awarded based on the Lowest Price Technically Acceptable criteria. Requirements include strict adherence to marking standards under MIL-STD-130 and packaging guidelines per MIL-STD 2073. Contractors must provide the Original Equipment Manufacturer details if they are not the manufacturer and must use the PIEE-WAWF system for electronic invoicing and receiving reports. The agreement mandates that any changes in production facilities be approved in writing by the Contracting Officer and may require a price reduction to cover administrative costs. Quality assurance is the responsibility of the contractor, who must maintain inspection records for 365 days following final delivery. Additionally, the contract specifies a strict protocol for design or part number substitutions, requiring specific code notifications and government approval for any changes beyond simple part number updates.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Supply of Pipe Cross Assemblies (NSN 4730-01-541-8067)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Hose Elbows (NSN 4730015085468)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Strip Seals (NSN 5330005881051)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Check Valves (NSN 4820016177314)

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Fluid Filter Elements (P/N ACB856F2)

MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The U.S. Navy’s Fleet Logistics Center Puget Sound is soliciting brass piping fittings under solicitation number N0040626Q0399, with an anticipated award date in August 2026 and a response deadline of August 7, 2026. The contract requires delivery of specific fittings including elbows, tees, couplings, unions, and adapters in 3/8” and 1/4” IPS sizes, all compliant with ANSI B16.11, Class 6000 pressure rating, and CUNI 70/30 material specifications. Items valued at $5,000 or more must be uniquely identified per MIL-STD-130 and tracked through the Wide Area WorkFlow system. All deliveries are FOB origin, meaning the Government arranges and pays for transportation via NAVSUP WSS Transportation at no cost to the contractor, while the contractor assumes responsibility for all tariffs, duties, taxes, and customs fees. Deliveries must be completed by specified dates, with the final destination being SRF AND JRMC YOKOSUKA in Japan, where Government representatives will conduct inspection and formal acceptance. The solicitation will evaluate offers based on technical capability—including delivery date—price, and past performance, with no single factor given priority, signaling a trade-off selection process rather than a lowest-price technically acceptable approach. Proposals must comply with multiple FAR/DFARS clauses related to cybersecurity, supply chain integrity, and contractor responsibilities, including safeguarding covered defense information under NIST SP 800-171, prohibitions on acquiring equipment from sanctioned foreign vendors, and mandatory reporting of cyber incidents. Packaging must adhere to ASTM-D-3951 with strict restrictions on materials such as asbestos, loose-fill polystyrene, and untreated wood; all packaging must be heat-treated and certified per ALSC standards. Markings must include NSN, part number, contract number, origin, and destination, with traceable shipping via commercial carriers and unique tracking numbers. Contractors must be registered in SAM, possess a valid CAGE code, and provide UEI information if supplying covered defense telecommunications equipment. Invoicing is exclusively through WAWF, and the government will verify actual receipt. No contract value is specified due to blank pricing fields in the solicitation.

General Info

U.S. Navy seeks ANSI B16.11 brass fittings for Yokosuka, Japan, with MIL-STD-130 tracking, FOB origin, and strict compliance on cybersecurity, materials, and packaging.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget SoundView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

NONE

Documents

(1)

Solicitation N0040626Q0399 for Fittings

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 21

Solicitation

Response DeadlineAug 7

Deadline has passed

Submission Closed

08/07/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound

Contacts1 person available

OfficeBREMERTON, WA, 98314-5100, USA

Organization / Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

View Agency Profile

Office AddressBREMERTON, WA, 98314-5100, USA

Contacts

HALEY AUSTIN

contact@example.gov

Full Description

Fleet Logistics Center Puget Sound (FLCPS) intends to solicit for FITTING.

The Government will evaluate the offeror's price for reasonableness and past performance as part of the responsibility determination in accordance with RFO 12.203.

All responsible sources may submit a quotation, bid, or proposal, as appropriate, which will be considered by the agency.

Quotes will be evaluated in accordance with RFO 12.203, the Government will select the most advantageous offer based on the following evaluation factors: technical including delivery date, price, and past performance in no order of relative importance.

NAVSUP WSS Transportation is provided at no cost to the Contractor and is mandatory in accordance with the solicitation. Any additional costs, including tariffs, duties, taxes, or customs fees, shall be included by the offeror in the applicable line item(s) of the proposal.

Anticipated Award Date: AUGUST / 2026

Contracting Officer: HALEY AUSTIN / HALEY.M.AUSTIN3.CIV@US.NAVY.MIL