Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Metal Hose Assembly Supply and Delivery

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply, packaging, labeling, and delivery of two metal hose assemblies identified by NSN 4720-01-115-9803, fully compliant with military specifications and Defense Logistics Agency requirements. The work falls under the NAICS code 332919 and is structured as a subcontract within the Department of Defense procurement framework, with the Defense Logistics Agency serving as the overseeing agency. All deliverables must adhere strictly to technical and logistical standards mandated by DLA, including proper documentation, packaging protocols, and labeling for military use. The contract was posted on July 20, 2026, and is associated with the award number SPE7M126P8914, indicating it is a finalized procurement action. The place of performance and specific office location are not provided, suggesting the work may be performed at any qualified vendor facility, with delivery directed to designated military locations. While the point of contact and set-aside details are not specified, the contract emphasizes full compliance with federal defense logistics protocols, ensuring timely and accurate fulfillment of mission-critical components.

General Info

Supply and delivery of two military-compliant metal hose assemblies under DLA oversight with strict packaging and labeling requirements.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply, packaging, labeling, and delivery of two metal hose assemblies (NSN: 4720-01-115-9803) in compliance with military specifications and DLA requirements.

Similar Contracts

Same NAICS industry code

Supply of TEE, BOSS (NSN 4730-01-708-1342) Metal FittingThe contract entails the manufacture, packaging, and delivery of three military-specification fabricated metal fittings designated as TEE, BOSS with National Stock Number 4730-01-708-1342, produced to meet stringent defense standards including MIL-STD-129, ASTM D3951, and DLA packaging requirements. These components are critical for military logistics and must be fabricated with precision to ensure compatibility and durability under operational conditions. The work is being executed under a subcontract issued by the Defense Logistics Agency on behalf of the Department of Defense, with all items required to comply fully with federal packaging and labeling mandates to enable seamless integration into the military supply chain. The contract was posted on July 20, 2026, and falls under NAICS code 332919, which classifies it within the Other Fabricated Metal Product Manufacturing sector. While specific performance locations and point of contact details are not provided, the delivery and packaging must adhere strictly to DLA regulations to satisfy audit and inventory control protocols. The subcontract is managed through the DIBBS system with a reference ID of SPE7M426P4122, indicating its formal placement within the Department of Defense procurement framework. Compliance with all technical and procedural specifications is mandatory, as deviations could result in rejection of the units and disruption of critical supply operations.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

VALVE, FLOATThe contract specifies the procurement of a single float valve with NSN 4820016078750 and part number 207957-01D from Griswold Industries, to be delivered in one unit under FOB Destination terms with a 20-day delivery window from the as-directed order. All packaging and labeling must strictly comply with ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence over any conflicting standards; palletization must adhere to RP001 requirements, and each unit pack must be marked with the correct Unit of Issue and Quantity per Unit Pack as defined in the contract. The delivery destination is the USS ZUMWALT DDG 1000 at FPO AP 96693, and shipments must use traceable transportation methods with no parcel post allowed; all hazardous materials, including mercury or mercury-containing compounds, are prohibited except in specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, and portable mercury-containing devices must have shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the destination under FAR 52.246-2, and the contractor must comply with multiple security, cybersecurity, and supply chain integrity clauses, including 252.204-7012 for safeguarding defense information, 252.204-7018 prohibiting acquisition of covered telecommunication equipment, and 252.223-7006 and 252.223-7008 prohibiting toxic chemicals and hexavalent chromium. The contractor must provide a Unique Entity Identifier and CAGE code, represent size and socioeconomic status, and comply with trafficking in persons, equal opportunity, employment eligibility verification, and sustainable product requirements. Electronic invoicing via WAWF is mandatory, and all submissions must conform to DLA’s technical and quality requirements from their master list, with the solicitation issued under SPE7MC-26-T-131W and managed by the Defense Logistics Agency’s Federal procurement system.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

THREAD PIECE, UNIONThis contract is for the procurement of 35 units of a thread piece, union with NSN 4730-01-473-4659, under solicitation SPE7M2-26-T-5580, issued by the Department of Defense’s Nuclear Reactor Program. The item must be delivered FOB origin within 168 days, with zero variance permitted in quantity, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and unit packaging codes, while marking follows MIL-STD-129 without special identifiers. The item is designated as a critical application, with approved suppliers listed, and mercury or mercury-containing compounds are strictly prohibited unless exempted for functional uses in batteries, lamps, instruments, weapon systems, or chemical reagents specified by NAVSEA, with additional containment requirements for portable mercury devices. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition size. The contract enforces DLA packaging requirements and transportation protocols per DLAD notes C19 and C20, with the original delivery deadline set for March 6, 2027, and a need ship date of January 5, 2027. Unit of issue is each (EA) at a price of $35.00, totaling a contract value of $1,225.00.

NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

CLAMP, PIPE, ANCHOR AThe contract specifies the procurement of 17 units of CLAMP, PIPE, ANCHOR A with NSN 4730-01-565-2664 under solicitation SPE7M3-26-T-7401, requiring delivery within 315 days from the need ship date of June 1, 2027, with an original required delivery date of June 7, 2027. All items must be delivered FOB origin with zero variance in quantity and are subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization aligned to DLA Packaging Requirements for Procurement, and all DLA Master List of Technical and Quality Requirements supersede any conflicting standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. The unit of issue is each, priced at $17.00 per unit, totaling $289.00. Delivery must be sent to DLA Distribution Warner Robins at Robins AFB, Georgia, with transportation governed by DLAD Proc Notes C19 and C20. Only authorized units of issue per DLA guidelines apply, and all markings and labeling must adhere to federal standards. The primary point of contact for the contract is William Cain of the Fluid Handling Division, Department of Defense.

FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

NOZZLE, FIRE EQUIPMEThe contract specifies the procurement of a fire hose nozzle identified by part number M24408-T1-2 and NSN 4210006010986, with a required quantity of 500 units to be delivered within 244 days. Manufacturing must follow a metal casting process requiring specialized tooling, and all items must comply with MIL-N-24408E specifications, including first article testing involving four samples witnessed by a Government Quality Assurance Representative. The first article test report must be submitted within 90 days of contract award, and approved test samples may be delivered as part of the final shipment. Quality conformance inspections are mandatory and must adhere to MIL-STD-1916 or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels or AQLs of VII, IV, and II respectively. All items must be marked per MIL-STD-130N and packaged in compliance with MIL-STD-2073-1E and DLA packaging requirements, with shipping and delivery addressed to the DDSP New Cumberland Facility in Pennsylvania under FOB origin terms. The item is designated as a critical application, subject to cybersecurity maturity model certification level 2 self-assessment, and must not contain intentionally added mercury except in limited, approved exceptions such as functional components in batteries or instruments, with portable mercury-containing devices requiring dual containment per NAVSEA standards. The contract is a service-disabled veteran-owned small business set-aside under NAICS code 332919, with a separate line item for the first article test requiring one unit priced at $1.00, though no separate charge is assumed unless otherwise cited.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

HEAT GUN, ELECTRICThe contract is for the procurement of 58 electric heat guns under the NSN 4940-00-438-1606, with a delivery requirement of 168 days after award. The solicitation, identified as SPE7M4-26-T-242X, was posted on July 20, 2026, and responses are due by July 23, 2026. Full and open competition is authorized, and the product must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date. The specification prohibits the use of Class I ozone-depleting chemicals in any component or packaging, overriding any conflicting specification language while maintaining all product performance standards. Substitute chemicals require prior approval unless explicitly authorized. Acceptable part numbers include EP-7 from CAGE 59164 and HG-751B from CAGE 83284. The contractor must also provide one copy of the manufacturer’s commercial manual covering operation, service, maintenance, and repairs with each unit. The place of performance is New Cumberland, Pennsylvania, with the contract managed by the Department of Defense’s Fluid Handling Division, and primary point of contact is Rory O’Reilly.

FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

MANIFOLD, HYDRAULICThe contract is for the procurement of a hydraulic manifold, part number 22948-900 with NSN 4730015692161, under solicitation SPE7M3-26-T-7390, issued as a total small business set-aside by the Department of Defense’s Fluid Handling Division. A total of 14 units are required, each priced at $14.00, with delivery due in 227 days from the award date, FOB origin, and inspection and acceptance to occur at the destination. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements, and the unit of issue is each. The item must be delivered to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with a required ship date of March 5, 2027, and original delivery date of March 21, 2027. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and the contract incorporates federal technical and quality specifications referenced in the DLA Master List. The point of contact is William Cain, and the solicitation response deadline was July 20, 2026, with posting on July 9, 2026.

FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

ELBOW, TUBE TO BOSSThe contract specifies the procurement of a steel elbow fitting with a 3/8 inch nominal tube outside diameter, designated as a commercial item and identified by NSN 4730-01-054-6023, with a total quantity of 374 units. The item must conform to the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, specifically referencing SAE AS1040G Revision G and SAE AS4841 Revision D, and is subject to Class 3 threads and critical application standards. Manufacturing and assembly must be performed exclusively by accredited entities listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, accessible via eAuditNet. The product is prohibited from containing mercury or mercury-containing compounds except under narrowly defined exceptions for functional components like batteries, sensors, or instruments, and portable mercury-containing devices must include a secondary containment and be shockproof in compliance with NAVSEA 5100-003D. Ozone-depleting chemicals are strictly banned, and any substitute materials require prior approval. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging protocols. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the shipment must be delivered within 173 days to the DLA Distribution Depot Hill in Hill AFB, Utah. The contract includes a zero variance tolerance on quantity, and the required delivery date is August 3, 2027, with a need ship date of January 10, 2027.

FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

VALVE,REGULATING,FLThis contract pertains to the repair and refurbishment of a regulating valve critical to a shipboard system, designated as SPECIAL EMPHASIS material due to its direct impact on safety, reliability, and operational integrity of naval vessels. The work requires strict adherence to referenced military and commercial specifications including ASTM-A581, ASTM-A582, SAE AMS 5643, MIL-STD-2035, MIL-STD-792, and multiple NAVSEA and S9074 series standards for welding, brazing, material certification, and nondestructive testing. All components must be refurbished to comply with specific drawings including V3D10233 and WI-S1E10035, with traceability maintained from raw material through final assembly using approved markings, heat lot codes, and validated certifications. The contract mandates that all materials be traceable to chemical and mechanical test reports, and any processed or repaired components must undergo re-certification if their properties are altered. The contractor must submit comprehensive documentation including Welding Procedure Specifications, Procedure Qualification Records, Consumed Weld Metal Certificates, and Final Certificates of Compliance through the Wide Area WorkFlow system, with final acceptance required prior to shipment. The contractor must operate under a quality system certified to ISO-9001 with supporting calibration controls per ISO-10012 or ANSI-Z540.3, and is subject to Government Quality Assurance at source by DCMA personnel. All subcontractors must be vetted for capability, and their work must conform to the same rigorous standards. For repair work, the vendor has 180 days from receipt of the carcass to perform a teardown and evaluation and submit a Firm-Fixed Price quote that includes all labor, materials, and handling costs. A mandatory Repair Turn Around Time of 365 days applies, with price reductions imposed for failure to meet deadlines and potential termination for default. No mercury may be present in components, and marking of materials is strictly controlled to avoid improper identification. All waivers and deviations—classified as Critical, Major, or Minor—require prior written approval by the Contracting Officer and must be submitted via ECDS. Certifications must be complete, unqualified, and directly linked to physical markings on each part; missing, incomplete, or ambiguous documentation results in rejection. The contract operates under Emergency Acquisition Flexibilities, is rated under DPAS, and requires bilateral acceptance before execution. All documentation must be submitted electronically via WAWF with designated

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

VALVE, GLOBEThis contract pertains to the procurement of a 1/2 inch socket weld in-line stop valve with backseat, manufactured in strict accordance with NAVSHIPS drawing 803-2177525, assembly C3A1AF, for use in critical shipboard systems where failure could result in catastrophic consequences including loss of life or the vessel itself. The item is designated as SPECIAL EMPHASIS MATERIAL (Level I), requiring exhaustive control procedures from raw material sourcing through final inspection. All materials must conform to precise specifications including ASTM-A105, ASTM-A182, MIL-S-24093, ASTM-A193, ASTM-A194, and others, with mandatory chemical and mechanical analysis traceable to heat lot numbers marked directly on components. Hardness, pressure testing, non-destructive inspections, and hydrogen embrittlement relief treatments are required and certified, with acceptance criteria tied directly to drawing notes and referenced standards. First Article Testing is mandatory, and all welding, brazing, and hardfacing must be performed by qualified personnel using approved procedures documented under S9074-AQ-GIB-010/248 and 0900-LP-001-7000, with full submission of weld procedure qualifications and consumed weld metal certifications before production begins. The contractor must maintain and operate a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or as an alternative, MIL-I-45208 with MIL-STD-45662 calibration standards, subject to government quality assurance inspection at source. Traceability is absolute—every material lot, component, and test result must be permanently and legibly marked, with documentation linking inspection data to individual items through unique traceability codes maintained across all subcontracted operations. Certifications, especially for chemical composition, mechanical properties, and non-destructive testing, must be 100% verified, signed electronically with controlled and auditable methods, and free of disclaimers. Final acceptance is zero-defect: one nonconformity triggers lot rejection. All fasteners must be marked per MIL-DTL-1222 with manufacturer ID, material symbol, and traceability number, and coatings must be applied after proper heat treatment and baking cycles. The contract mandates strict configuration control, requiring Engineering Change Proposals for any modifications and prohibits unapproved deviations. Deliver

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

UNION,PIPEThis contract, issued under solicitation N0010426QFF66 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, requires the furnishing of a 1-inch NPS Union Assembly designated as SPECIAL EMPHASIS Level I material due to its critical use in shipboard systems, where failure could result in catastrophic loss of life or vessel. The item must conform precisely to Naval Ship Systems Command Drawing 803-1385946, with specific prohibitions against welding on UNS C92200 and UNS C90300 materials, and mandatory pressure ratings corrected to 1500 WOG for 1/8 to 2-inch NPS and 800 WOG for 2-1/2 inch NPS. All components must be traceable from raw material through final assembly to certified test reports, with permanent markings applied per MIL-STD-792. Chemical and mechanical analysis is required for critical parts, and material certifications must include full, unqualified declarations of compliance with no disclaimers. Each union assembly must pass hydrostatic and underwater or soapsuds tests in accordance with specified notes in the drawing, with strict pressure and time tolerances applied. Certification of compliance must be submitted via WAWF prior to delivery, with all data referencing contract N00104 and directed to Portsmouth Naval Shipyard’s updated DODAAC N50286, and no material may be shipped without prior written acceptance. The contract mandates a quality system compliant with ISO-9001 and either ISO-10012 or ANSI-Z540.3 with ISO/IEC-17025, or alternately MIL-I-45208 and MIL-STD-45662, subject to government audit at any time during production. All subcontractors must be evaluated and their work controlled to ensure conformance, with traceability preserved throughout every processing step, including subcontracted operations. The contract explicitly prohibits mercury contamination and unauthorized marking of materials, except for fasteners, and requires all thread inspections to follow FED-STD-H28 System 21 or 22 as applicable, with exacting standards for O-ring groove inspection using the General Acceptance Criteria CSD008 where no explicit defect criteria exist. Final acceptance requires 100% inspection of traceability markings, certification documents, and test reports, with zero-defect lot

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 18 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

about 18 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE