Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Flush Valves (NSN 4510-01-522-9198)

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This HUBZone set-aside subcontract involves the supply of 138 Flush Valves, part number 5500205, under NSN 4510-01-522-9198 for the Department of Defense. The contractor is responsible for manufacturing or sourcing the valves in accordance with the DLA Master List of Technical and Quality Requirements. All units must be packaged and labeled according to MIL-STD-129, RP001, and ASTM D3951 standards for delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards is mandatory for this engagement. The contract falls under NAICS code 332919 and requires strict adherence to the specified technical and quality benchmarks to support prime contractors on DLA supply contracts.

General Info

HUBZone subcontract for 138 DoD flush valves delivered to DLA New Cumberland.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

HZC

Documents

This scope was carved out of SPE8E8-27-T-0342.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE, FLUSH

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 138 units of Flush Valves (Part Number 5500205) for prime contractors on DLA supply contracts. Manufactures or sources valves per NSN 4510-01-522-9198 and DLA Master List of Technical and Quality Requirements. Packages and labels units per MIL-STD-129, RP001, and ASTM D3951. Requires Buy American Act compliance and NIST SP 800-171 cybersecurity standards. Delivers 138 packaged valves to DLA Distribution DDSP New Cumberland, PA.

Similar Contracts

Same NAICS industry code

COUPLING HALF, QUICK

Solicitation # SPE7M3-27-T-0769

This solicitation, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one quick coupling half, identified by NSN 4730-01-579-8245. The requirement specifies a delivery timeframe of 20 days after order, with an original required delivery date of May 31, 2024. The item is to be delivered FOB Origin to the Armament Inspectorate in Warszawa, Poland. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically prohibiting the use of additive manufacturing unless authorized and restricting the intentional addition of mercury or mercury-containing compounds. Compliance requirements are extensive, including CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance are both set at the point of origin, with Certificate of Conformance procedures authorized under FAR 52.246-15. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Balance of Payments Program for quotes exceeding the micro-purchase threshold. The solicitation is open to full and open competition, with specific price evaluation preferences noted for HUBZone small business concerns.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

VALVE STEM, TTV

Solicitation # N0010424QBM87

This solicitation, number N00104-24-Q-BM87, is issued by the Navsup Weapon Systems Support Mech office in Mechanicsburg, PA, for the procurement of one Valve Stem, TTV (NIIN: 016320195). The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations based on technical compliance, price, and risk assessments from the Supplier Performance Risk System. The procurement is a DO rated order for national defense and emergency preparedness, and it requires adherence to the Buy American and Balance of Payments Program. The contractor must comply with strict technical and quality standards, including the Individual Repair Part Ordering Data (IRPOD) and higher-level quality requirements under MIL-I-45208. Packaging must follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and unique item identification per MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system. The response deadline for quotes is November 30, 2026, and submissions are accepted via email or NECO.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QFE70

This fixed-price solicitation from NAVSUP Weapon Systems Support Mechanicsburg is for the procurement of a Globe Valve (NSN 4820-01-211-8826) designated as a Critical Safety Item and Special Emphasis Material Level I. Due to the high risk associated with failure in crucial shipboard systems, the contract mandates strict quality assurance, comprehensive material traceability, and adherence to TDP Version 013. The scope includes the delivery of the valve to the Portsmouth Naval Shipyard within 365 days, with a requirement for a Certificate of Compliance and detailed test certifications submitted via Wide Area Workflow for review and acceptance prior to shipment. Technical requirements specify the use of ASTM-A276 or ASTM-A479 UNS S31600 material for key components, including the body, bonnet, union nut, and stem assembly. The contractor must maintain a quality system compliant with ISO-9001 and follow rigorous inspection standards for threads, pressure tests, and non-destructive testing. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additionally, the contractor must comply with strict cybersecurity reporting under clause 252.204-7012 and follow MIL-STD-2073 and MIL-STD-129 for packaging and marking.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

47--CONNECTION,FLEXIBLE

Solicitation # N0010426QYAGN

Solicitation NO0014-26-Q-YAGN is a fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and delivery of flexible connections, specifically NSN 4730-01-144-5975. The required items must adhere to the design represented by Cage Code 18444, reference number 299941-100, and must be entirely mercury-free for use on submarines and surface ships. The government retains an option to order an additional quantity of up to 100 percent of the original order for 365 days after receipt. The closing date for this solicitation has been amended to October 19, 2026. The contract mandates strict quality and technical standards, including physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073. All deliveries are FOB Destination with a delivery window of 180 days. Offerors who are not the Original Equipment Manufacturer must provide the OEM's company name, CAGE code, and a signed letter of authorization. Evaluation will be conducted using the Supplier Performance Risk System to assess item, price, and supplier risk, alongside Buy American and Balance of Payments Program policies. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 2 months

PARTS KIT,BALL VALV

Solicitation # N0010426QNE98

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of 175 ball valve parts kits (NSN 4820-01-425-4163). The material is designated as Special Emphasis Level I, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. Consequently, the contract mandates strict quality assurance, including a requirement for the contractor to maintain a quality system compliant with ISO-9001 or MIL-I-45208. The kits consist of a ball made from SAE-AMS-6931 and seats made from MD71-GG Mearthane, both requiring rigorous quantitative chemical and mechanical analysis. Key technical requirements include hydrostatic testing for each ball at 1875 PSI for 30 minutes, with dye penetrant inspection as an acceptable substitute for manufacturers lacking test fixtures. All welding and brazing must adhere to specific S9074 and 0900-LP standards, requiring prior approval of qualification data. The contractor must submit a Certificate of Compliance and all objective quality evidence via the Wide Area Workflow (WAWF) system to Portsmouth Naval Shipyard for review and acceptance before shipping. Final inspection follows a zero-defect acceptance policy, with sampling based on ANSI/ASQ-Z1.4. The government intends to make a single fixed-price award based on the most advantageous offer, prioritizing past performance over price. Packaging must comply with MIL-STD-2073-1, and all shipments must be prepaid to the destination. Offerors must provide a Quality Assurance Manual to be eligible for award and must certify that the materials are mercury-free. All configuration changes or deviations require formal review and approval by the Contracting Officer through Engineering Change Proposals or waiver requests.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

DELTA-P IND ASSY

Solicitation # SPRMM127QKA47

Solicitation SPRMM1-27-Q-KA47 is issued by the Defense Logistics Agency Weapons Support Mechanicsburg for the manufacture and delivery of one DELTA-P IND ASSY, identified by NIIN 016642911. The item must be produced according to the design represented by Cage Code 99517, reference number 12052305-005. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations based on LPTA criteria and risk assessments from the Supplier Performance Risk System. The procurement is categorized under NAICS code 332919 with a small business size standard of 750 employees. Key technical requirements include strict adherence to MIL-STD-130 for physical identification and a mandatory mercury-free certification for use on submarines and surface ships. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific DLR labeling requirements for shipping containers. Inspection and acceptance will occur at the contractor's or subcontractor's plant. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors must provide CMMC Level 1 self-certification and identify the Original Equipment Manufacturer and CAGE code if they are not the manufacturer. Delivery is destined for the Pearl Harbor Naval Shipyard IMF.

SPRMM1 DLA Mechanicsburg

POSTED

about 8 hours ago

DEADLINE

in about 1 month

STEM,FLUID VALVE

Solicitation # N0010426QZB64

Solicitation N00104-26-Q-ZB64 is a fixed-price request for quotations from NAVSUP Weapon Systems Support for the manufacture of a Fluid Valve Stem (NSN 4820-01-496-3210). This item is designated as a Critical Safety Item and Special Emphasis Material Level I, as its failure could result in catastrophic loss of life or the ship. The government will provide the necessary barstock (NIIN 014959538X2) as Government Furnished Material, and the contractor must maintain strict heat traceability throughout production. The stem must be manufactured in accordance with NAVSEA drawing 803-5959307 and related specifications, using ASTM-B348 Grade 23 or SAE-AMS-4931 material. Weld repairs on titanium parts are strictly prohibited. The contract mandates rigorous quality assurance and certification standards, requiring a quality system compliant with ISO-9001 and specific calibration standards such as ISO-10012 or ANSI-Z540.3. Key requirements include dye penetrant inspection, a zero-defect lot acceptance policy, and the submission of a comprehensive Certificate of Compliance and test results via the Wide Area Workflow system prior to shipment. All deliverables must be preserved and marked according to MIL-STD-2073 and MIL-STD-129. Award will be made to the most advantageous offeror, with past performance weighted as more important than price.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

48--ACTUATOR,HYDRAULIC-, IN REPAIR/MODIFICATION OF

Solicitation # N0010427QZA04

This fixed-price contract, solicitation number N00104-27-Q-ZA04, is issued by the Navsup Weapon Systems Support Mech for the manufacture or refurbishment of hydraulic actuators. The scope of work requires the contractor to inspect, clean, and refurbish the items in accordance with Drawing 30093-40940 and MS NO. 5640-081-346 REV A CHG-4. Final delivery of the material must be completed within 86 days of the contract's effective date, with the ship-to destination located in Kittery, Maine. The award is designated as a DO rated order under the Defense Priorities and Allocations System, signifying its importance for national defense. Key requirements include physical identification per MIL-STD-130 and strict adherence to preservation, packaging, and marking standards such as MIL-STD-2073-1 and MIL-STD-129. If additive manufacturing is utilized, the contractor must provide comprehensive traceability data via DD1423 reporting. The contract includes a one-year warranty for supplies of a noncomplex nature and mandates the use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Evaluation for award is based on the Supplier Performance Risk System, assessing item, price, and supplier risk. All transportation to and from the repair site is paid for by the US Navy.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QNE90

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a Valve Stem (NSN 1HM 4820-01-548-5698) to be delivered within 120 days. The item is designated as Special Emphasis material (Level I, Scope of Certification) because it is used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Due to this criticality, the contract mandates strict quality controls, including a requirement for the contractor to maintain an ISO-9001 quality system and undergo Government Quality Assurance at source via the Defense Contract Management Agency. Technical requirements specify the use of ASTM-B150 Alloy C63200, mandatory oxygen cleaning per MIL-STD-1330, and a strict mercury-free composition. The award will be made to the offeror determined to be most advantageous to the Government, with past performance weighted as more important than price. Key deliverables include the hardware and comprehensive test certifications submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards, with specific red labeling for Level 1 materials. The procurement is DO certified for national defense under the Defense Priorities and Allocations System and is conducted as a simplified acquisition.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

VALVE, CARTRIDGE

Solicitation # N0010427QFA13

This contract, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a solicitation for the manufacture or refurbishment of two cartridge valves (NSN 4820-01-646-8015) in accordance with drawing 237914-0002. The award will be made to a single offeror based on a trade-off where past performance is considered more important than price. The contract is designated as a DO-rated order for national defense use and is issued under Emergency Acquisition Flexibilities. Final delivery of the material is required within 365 days of the contract's effective date, with FOB Destination terms. Key technical requirements include strict adherence to MIL-STD-130 for marking, MIL-STD-2073 for packaging, and MIL-STD-1330 for oxygen cleaning. The contractor must provide a one-year warranty from the date of delivery and submit certification data CDRLs at least 20 days prior to scheduled delivery. If additive manufacturing is utilized, a Master Component Traceability Ledger must be maintained and submitted. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and reporting, and compliance with Buy American and Balance of Payments program certifications. Inspection and acceptance will occur at the origin.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

VALVE,REGULATING,FL

Solicitation # SPRMM127QKA27

This fixed-price solicitation, issued by DLA Mechanicsburg under solicitation number SPRMM127QKA27, requires the manufacture and delivery of two regulating valves (VALVE,REGULATING,FL) based on the design represented by Cage Code 99643, reference number 84140-1. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) criteria, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Offerors must be authorized distributors of the original manufacturer and are prohibited from providing refurbished material. Technical drawings are not available for this item, and the contractor is responsible for ensuring the product meets all quality requirements, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073-1. The contract mandates the use of PIEE-WAWF for the electronic submission of invoices and receiving reports, and any requests for modifications must be processed through the Workflow Pro (WFP) Mod Assist module. Inspection and acceptance will occur at the origin. Key compliance requirements include CMMC Level 1 self-certification, adherence to the Buy American Act, and strict prohibitions relating to Chinese military companies. Contractors must maintain inspection records for 365 days following final delivery and are required to provide the Original Equipment Manufacturer's CAGE code and part number when submitting quotes.

SPRMM1 DLA Mechanicsburg

POSTED

about 8 hours ago

DEADLINE

in about 1 month

NOZZLE,VALVE — 4820017141239 — SPRPA127QXA57

Solicitation # SPRPA127QXA57

Solicitation SPRPA127QXA57, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks a single award for the supply of nine valve nozzles (NSN 4820-01-714-1239). This procurement is designated as a Critical Safety Item (CSI) and requires the contractor to maintain an ISO9001 quality management system. Delivery is required within 90 days to DLA Distribution Cherry Point, North Carolina, with FOB Destination terms. Inspection and acceptance will occur at the origin. The award will be based on the most advantageous offer, with past performance weighted as more important than price. The government will utilize the Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Strict packaging and marking standards are mandated, including compliance with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and electrostatic discharge protection where applicable. Payment will be processed electronically via Wide Area WorkFlow (WAWF). The solicitation incorporates various FAR and DFARS clauses, including the Buy American program and cybersecurity requirements under DFARS 252.204-7012.

Pa DLA Aviation At Philadelphia

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Supply of Adjusting Plugs

POSTED

about 3 hours ago

DEADLINE

Supply of Critical Application Machine Parts (FN Herstal S.A. Sourced)

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Machine Components (Pins and Axes)

POSTED

about 3 hours ago

DEADLINE

Supply of Light Indicators (NSN 6210-01-686-4475)

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

ACCELERATOR, MACHINE GU

Solicitation # SPE7L7-27-Q-0167

Solicitation SPE7L7-27-Q-0167 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supplier Operations for the procurement of various machine parts, including ammunition chute supports, machine gun accelerators, belt feed slide pins, and fixing pawls axis. The requirements include specific quantities such as 16 accelerators and 55 belt feed slide pins, with delivery dates ranging from 180 to 295 days after delivery order. Delivery is set as FOB Destination, with primary shipping locations at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania and DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Critical application items must be sourced from FN Herstal S.A. and require supply chain traceability documentation per DLA Directive Procurement Note C03. Due to the nature of the items, the contract incorporates International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR) for the export control of technical data, as well as CMMC Level 2 certification requirements for certain munitions list items. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

INDICATOR, LIGHT

Solicitation # SPE8E7-27-T-0399

Solicitation SPE8E7-27-T-0399 is issued by the DLA Troop Support Construction and Equipment office for the procurement of 13 light indicators, identified by NSN 6210-01-686-4475 and Eaton Corp Cutler Hammer part number E34TB120L. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a delivery window of 50 days after order and an original required delivery date of July 5, 2026. Shipping terms are FOB Origin, and the procurement falls under NAICS code 335132. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for preservation, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, specifically referencing RC001 for source approval documentation and RQ011 for the removal of government identification from non-accepted supplies. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and various DFARS cybersecurity and hazardous material labeling regulations.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 3 hours ago

DEADLINE

RIGHT SIDE TRAVEL C

Solicitation # SPE8E5-27-T-0392

Solicitation SPE8E5-27-T-0392 is a HUBZone set-aside procurement issued by the Defense Logistics Agency for the acquisition of 57 units of Right Side Travel C, identified by NSN 5411-01-476-7145 and part number 5-13-6416-2(GREEN). The requirement is for a quantity of 57 each with a delivery timeline of 133 days after receipt of order, featuring a need ship date of March 23, 2027, and an original required delivery date of June 7, 2027. Delivery is established as FOB Origin, with the destination and inspection point located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled per MIL-STD-129 and palletized according to RP001. Key compliance requirements include the submission of Safety Data Sheets for hazardous materials, a prohibition on the intentional addition of mercury, and a strict ban on the use of additive manufacturing for the produced items. Award evaluation includes a HUBZone price preference, and the contract incorporates various FAR and DFARS clauses regarding the Buy American Act, cybersecurity reporting, and the prohibition of covered telecommunications equipment. Payment and invoicing are to be processed electronically through the Wide Area Workflow system.

All Other Miscellaneous Textile Product Mills

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7L7-27-T-0450

Motor and Generator Manufacturing

POSTED

about 3 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-27-T-1328

Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

FOUR LEGGED CHAMBER

Solicitation # SPE8E8-27-T-0441

Solicitation SPE8E8-27-T-0441 is a fixed-price procurement issued by the Defense Logistics Agency for the supply of 52 Four Legged Chambers, identified by NSN 4540-01-513-8154. The requirement is split into two line items: 17 units for delivery to the DDSP New Cumberland Facility in Pennsylvania and 35 units for delivery to DLA Distribution San Diego. The government notes that manufacturing may require specific casting, forging, and tooling, which the government may not provide. Delivery is required within 71 days after receipt of order, with required delivery dates set for July 1, 2027, and need ship dates ranging from January to May 2027. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130N for identification of military property. Inspection and acceptance will occur at the destination. Key regulatory requirements include compliance with the Buy American Act, DFARS cybersecurity reporting standards, and prohibitions on covered defense telecommunications equipment. While the solicitation is not a small business set-aside, it incorporates the DLA Master Solicitation for Automated Simplified Acquisitions. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

WELDING QUALIFICATION

Solicitation # SPE8E6-27-T-0480

Solicitation SPE8E6-27-T-0480 is a request for the procurement of 352 Welding Qualification Test Kits (NSN 3439-01-682-4453) for the Department of Defense, specifically the DDSP New Cumberland Facility. The requirement is governed by basic drawing 98752 8027655 (Revision B) and reference drawing 98752 200415485 (Revision E). Delivery is expected by June 7, 2027, with a need ship date of April 26, 2027, under FOB Origin terms. The procurement is designated as a total small business set-aside under FAR 19.5, and the award may be processed via an automated system. The contract imposes strict technical and quality standards, incorporating the DLA Master List of Technical and Quality Requirements, including RP001 for packaging and RQ011 for the removal of government identification. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls under DFARS 252.225-7048, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contractor must comply with the Buy American Act and the Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. Inspection will occur at the destination per FAR 52.246-2. Quotations are due by November 9, 2026.

Welding and Soldering Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

ELECTRODE, WELDING

Solicitation # SPE8E5-27-T-0391

Solicitation SPE8E5-27-T-0391 is a fixed-price procurement issued by the Defense Logistics Agency for the supply of welding electrodes, identified by NSN 3439-01-180-4976. The requirement specifies 32 units of 16lb electrodes with a 0.035 inch diameter, specifically identifying Hobart Brothers part number 535603512ML as the exact product. These items are designated as critical application items and must comply with AWS A5.10/A5.10M-17 standards. Delivery is required at the DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of March 29, 2027, and a need ship date of April 26, 2027. The contract mandates strict adherence to packaging and marking standards, including ASTM-D3951-15 for general packaging, MIL-STD-129 for markings, and MIL-STD-130N for identification of U.S. military property. Inspection and acceptance will occur at the destination. Key regulatory requirements include the Buy American Act, the Berry Amendment, and various DFARS clauses regarding cybersecurity, such as safeguarding covered defense information and reporting cyber incidents. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Evaluation for award may include a price preference for HUBZone Small Business Concerns and may be subject to an automated award process.

Welding and Soldering Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Fluid Flow Restrictor Unit Fabrication (NSN 4730015724272)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Upper Actuator Valve Diaphragm

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Fixed Electrolytic Capacitors (NSN 5910-00-203-5777)

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Fire Extinguisher Valve Fabrication (NSN 4210-00-825-1183)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PARTS KIT, FLUSH VALVE

Solicitation # SPE8E8-27-T-0331

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

FITTING ASSEMBLY, FL

Solicitation # SPE4AX26F9907

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-183E

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0342

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

ELBOW, TUBE TO HOSE

Solicitation # SPE7M3-26-T-5376

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-2872

Defense Logistics Agency

POSTED

DEADLINE

NOZZLE, FUEL AND OIL SE

Solicitation # SPE8E9-27-T-0332

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

ELBOW, TUBE TO BOSS

Solicitation # SPE7L127FA19M

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS