Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Tennessee was posted on July 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Fittings

Closed
Z4706State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332912
New
DIBBS
PARTS KIT, SAFETY RE
Solicitation # SPE7M1-27-T-1709
Solicitation SPE7M1-27-T-1709 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain for one safety relief valve parts kit, identified by NSN 4820-01-571-1360. The kit must include all seats, seals, and lubricants required for valve repair and is associated with part numbers from Emerson Automation Solutions, JA Moody LLC, ESI Acquisition Corp, Anderson Greenwood, and Semco Marine Svendborg. The required delivery date is March 12, 2026, with a delivery window of 20 days after the award. Inspection and acceptance will occur at the destination, and the item is to be shipped to the USS Savannah (LCS-28). The contract mandates strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, specifically requiring preservation method 31 and the latest revision of MIL-STD-2073-1 Appendix D for kits. Critical compliance requirements include supply chain traceability documentation per DLA Directive Procurement Note C03 and the prohibition of additive manufacturing unless specifically authorized. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information. Quotations must be submitted via the DIBBS portal by November 9, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7M1-27-T-1706
Solicitation SPE7M1-27-T-1706 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one nickel alloy fluid valve stem used on a 2.250 inch ball valve, identified by NSN 4820-01-480-0896. The requirement specifies a delivery timeline of five days after receipt of order, with shipping terms set as FOB Origin and delivery to a facility in Whitehall, Ohio. Inspection and acceptance are both required at the destination, adhering to FAR 52.246-2 and specific sampling methods including MIL-STD-1916 or ASQ H1331. The contract imposes strict compliance requirements, including DLA packaging standards RP001 and MIL-STD-2073-1E, and marking per MIL-STD-129. Technical data is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation mandates CMMC Level 2 certification and adherence to the Buy American Act and Berry Amendment. Invoicing must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332912
New
DIBBS
COCK, POPPET DRAIN
Solicitation # SPE7MC-27-T-0719
Solicitation SPE7MC-27-T-0719 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Hardware/Electrical office for 529 poppet drain cocks, identified by NSN 4820-01-306-3275. The required items must feature a Green 383 topcoat color and adhere to specific technical data packages and drawings. This procurement is set aside for certified Women-Owned Small Business (WOSB) concerns. Delivery is required within 195 days after receipt of order, with a need ship date of August 18, 2026, and a final delivery date of January 26, 2027, shipped FOB Origin to the DLA Distribution Red River receiving building in Texarkana, Texas. The contract carries stringent security and compliance requirements, including export control restrictions under ITAR and EAR. Eligible offerors must possess an approved US/Canada Joint Certification Program certification and CMMC Level 2 certification. Technical compliance requires the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards, and components must be sourced from qualified QPL/QML sources. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Additionally, contractors must adhere to the Buy American Act and Berry Amendment domestic sourcing restrictions and utilize Wide Area WorkFlow for all invoicing and receiving reports.
RED RIVER RECEIVING BLDG

POSTED

about 17 hours ago

DEADLINE

in 2 days
NAICS: 332912
New
DIBBS
VALVE, HYDRAULIC
Solicitation # SPE7MC-27-T-1277
SAN DIEGO

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7MC-27-T-1244
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332912
New
DIBBS
VALVE, LINEAR, DIRECTION
Solicitation # SPE7MC-27-T-1248
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7MC-27-T-1258
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332912
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-290D
Solicitation SPE7MC-26-T-290D is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of two valve seats, identified by NSN 4820015908410 and Hunt Valve Company part number 5021-27-6. This is a critical application item that may require specialized tooling, casting, or forging for manufacture. The government requires delivery within 100 days after order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination in Tracy, California. The contract mandates strict adherence to technical and quality requirements via RA001 and prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury compounds. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific instructions to seal or plug all openings. Offerors must submit quotes through the DIBBS system by October 5, 2026, and are encouraged to provide quantity ranges. Compliance with the Buy American Act, Berry Amendment, and various FAR and DFARS clauses regarding cybersecurity and labor standards is required.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
NAICS: 332912
New
DIBBS
ADAPTER, STRAIGHT, FL
Solicitation # SPE7M5-27-T-1600
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7M4-27-T-1884
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332912
New
DIBBS
CONNECTING LINK, RIGID
Solicitation # SPE7L1-27-T-1384
Solicitation SPE7L1-27-T-1384 is a fixed-price contract issued by the DLA Weapons Support Land Supply Chain for the procurement of 17,000 rigid connecting links, identified by NSN 3040-01-475-6647. The delivery is required within 161 days after receipt of order, with a need ship date of April 6, 2027, and a final required delivery date of June 3, 2027. Delivery is set as FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. Inspection and acceptance are to take place at the destination per FAR 52.246-2. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Compliance with CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information is required. Additionally, the item is subject to ITAR or EAR export controls, and the use of Class I ozone-depleting chemicals is prohibited. Payment will be processed electronically through the Wide Area WorkFlow system. Offerors must comply with the Buy American Act and Berry Amendment, and those seeking HUBZone price evaluation preferences must be SBA-certified. Quotations are due by October 26, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
NAICS: 332912
New
DIBBS
VALVE, FLOW CONTROL
Solicitation # SPE7MC-27-T-1283
SAN DIEGO

POSTED

about 17 hours ago

DEADLINE

in 12 days

AI Contract Overview

Show more

The contract solicits a hydraulic coupling fitting with a 3/8 inch body and port size, specifically a flat face female NPT thread type designed for interchangeability in hydraulic systems. The approved manufacturer and part number is STUCCHI 803601000, and the item falls under the category of fittings. The solicitation, identified by number Z4706, was posted on July 1, 2026, with a response deadline of July 8, 2026, at 7:00 PM. It is issued by Nashville Electric Service under the Tennessee state agency, targeting local government and public utility procurement. The place of performance is in Nashville, Tennessee, and all responses must be submitted through the vendor portal linked in the solicitation. Shanna Faulk serves as the primary point of contact for procurement inquiries, reachable via email or phone provided in the contract data.

General Info

STUCCHI 803601000 hydraulic coupling, 3/8 NPT, flat face, Nashville Electric Service solicitation Z4706 due July 8, 2026.

Agency

Tennessee → Nashville Electric Service

NAICS

332912 - Fluid Power Valve and Hose Fitting Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1

RFB Z4706 Hydraulic Coupling Fitting

PDF, High priority: read this firstrfb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / AgencyTennessee → Nashville Electric Service
Office AddressNashville, TN, USA
Contacts
Shanna FaulkProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FITTING HYD COUPLING COUPLER 3/8" INTERCHANGE HYDRAULIC COUPLING, FLAT FACE FEMALE NPT THREAD TYPE, COUPLER TYPE, 3/8" BODY SIZE, 3/8" PORT SIZE Approved Manufacturers and/or Part Numbers: STUCCHI803601000

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 484220
New
SLED
Specialized Flatbed/Open-Top Transport for Steel PolesThis subcontract involves the specialized transport of five 30-foot steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider must utilize an open-top vehicle to facilitate efficient unloading and is strictly required to keep the poles wrapped throughout transit to protect the factory-applied dark bronze finish. The primary objective is the delivery of the shafts to the designated site in a condition that preserves the integrity of the factory finish. This opportunity falls under NAICS code 484220, with a response deadline set for November 3, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332323
New
SLED
Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.
Ornamental and Architectural Metal Work Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
SLED
Steel Pole
Solicitation # Z5432
Nashville Electric Service has issued Request For Bid Z5432 for the procurement of five 30-foot standard steel square straight shafts. The poles must feature a four-hole anchor base with a bolt circle between 10.5 and 11.5 inches, base nut covers, and a hand hole access of at least 3.5 by 5 inches with a cover. Each shaft must be factory-applied in dark bronze and equipped with two detachable 2-inch IPS horizontal tenons for luminaire mounting. Technical requirements specify that the poles must comply with the NESC 90 MPH wind load requirement and possess the strength to support two 50lb fixtures at 180 degrees with an EPA of 2.5 square feet each on a 10-inch arm. Bids must be submitted via the Bid Center by 2:00 pm local time on November 3, 2026. Only approved brands, specifically Hapco and Lytepole, are acceptable, and alternate brands will not be considered. To ensure quality and ease of unloading, poles must be wrapped to protect the finish during shipment and delivered using an open-top vehicle. Vendors are required to state their earliest delivery in calendar days, as delivery time may be a factor in the award decision. The primary procurement contact for this solicitation is Shanna Faulk.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
SLED
Supply of Figure 8 Swing Links (30K lbs)This subcontract agreement involves the supply of forged steel Figure 8 swing chain links for prime contractors working under Nashville Electric Service contracts. The required components must feature two 7/8 inch eyes, possess an ultimate strength of 30,000 pounds, and be galvanized in accordance with ASTM A123 standards. All deliverables must strictly adhere to specified brand and part number requirements for ItemId 182574500. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must respond by October 29, 2026, regarding this procurement categorized under NAICS code 332510.
Hardware Manufacturing

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 423830
New
SLED
Supplier of 3M Safety Walk Anti-Slip RollsThis subcontract agreement involves the procurement and delivery of industrial anti-slip safety walking surfaces for prime contractors serving the Nashville Electric Service in Tennessee. The scope of work specifically requires the supply of 3M-AUTO 19282 Safety Walk Black Medium Grade rolls, or an approved equivalent, measuring 6 inches by 60 feet. The selected supplier is responsible for the physical delivery of the grip tape rolls to the designated facility in Nashville, ensuring strict adherence to established delivery timelines. This opportunity is categorized under NAICS code 423830 and is managed through the Nashville Electric Service vendor portal.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 334418
New
SLED
Supply of 3P.S.T. Back Connected Knife SwitchesThis subcontract involves the supply and delivery of industrial electrical knife switches for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work specifically requires the provision of AVO MULT MTS S-203-D-B units configured as 3P.S.T. back connected. These units must include BC barriers, ganged handles, dividers, and TBT-26 long studs, though mounting bars are excluded from the delivery requirements. The procurement is categorized under NAICS code 334418. Interested parties should note that the posting date is October 23, 2026, with a response deadline set for October 30, 2026. All physical 3P knife switch units must be delivered in accordance with the specified technical configurations to support the agency's infrastructure projects.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 314121
New
SLED
Lineman's Rubber Glove ProtectorsThis subcontract involves the manufacture and supply of size 9 leather protector gloves for prime contractors working on Nashville Electric Service safety equipment projects. The gloves must be designed for use with 5,000 volt rubber gloves and strictly adhere to Federal Specification KK-L-170C and ASTM Specification F696-91. Each pair must be individually plastic-bagged and stamped on the cuff with the rubber glove hand size, the manufacturer name, and the NES designation. The scope of work requires the delivery of 24 pairs of these marked protector gloves to Nashville. This opportunity is categorized under NAICS code 314121 and is managed by the Nashville Electric Service in Tennessee. Interested parties should note the response deadline of October 30, 2026.
Curtain and Drapery Mills

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
SLED
Flatbed Hauling and Unloading ServicesThis subcontract for Flatbed Hauling and Unloading Services involves the transportation and delivery of 400 utility poles to various yards in Nashville, Tennessee, in support of Nashville Electric Service utility projects. The selected provider will perform truck freight transportation using flatbeds, with operations scheduled between 6:30 AM and 2:30 PM CST. The scope of work requires the use of specialized equipment for on-site unloading, including crane trucks, knuckle booms, or heavy-duty forklifts. To qualify, personnel must possess a valid CDL and proper equipment operator certification. Interested parties must respond by November 5, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 321911
New
SLED
Treated Wooden Utility Pole SupplierThis subcontract agreement establishes the requirements for a supplier to provide treated wooden utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work involves the manufacture and delivery of 400 40-foot Class 4 poles constructed from either Douglas Fir or Southern Pine. All materials must adhere strictly to NES Specifications 33-151R13 or 33-252R10. The supplier is responsible for the complete production process, including roofing and gaining according to NES Drawing 910 and the application of necessary chemical preservation treatments. The contract concludes upon the successful delivery of the 400 finished and processed poles. Interested parties must respond by November 5, 2026.
Wood Window and Door Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
SLED
Steel Utility Pole Supplier (60ft Class H3)This subcontract agreement establishes the requirements for a supplier to provide hot-dipped galvanized steel poles for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing 60-foot poles that meet Class H3 equivalent standards, specifically maintaining a minimum capacity of 0243 ft-kips at ground level. The scope of work includes providing 1 inch jacking nuts and bolts for both the top and bottom halves of the poles, with a strict construction limit of no more than two sections. The selected supplier is responsible for the final delivery of the finished steel poles to Nashville Electric Service.
Fabricated Structural Metal Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
SLED
Flatbed Delivery ServicesThis subcontract for Flatbed Delivery Services involves the transportation of 200 fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects. The selected provider will be responsible for hauling these units from the manufacturer to designated delivery points in Nashville using an open flatbed truck or trailer as specified in the statement of work. To qualify for this engagement, the contractor must possess standard commercial trucking licenses and the required insurance coverage. The solicitation was posted on October 23, 2026, with a response deadline of November 3, 2026. This project falls under NAICS code 484220 for specialized freight trucking.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 326121
New
SLED
Tubular Fiberglass Crossarm SupplierThis subcontract agreement establishes the supply of 200 ten-foot tubular fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing components that adhere to NES Specification ESI-4-E, with dimensions ranging from 3 1/2" x 4 1/2" to 5" x 7". The scope of work includes the provision of braceless mounting assemblies utilizing two 5/8" diameter bolts with vertical spacing of either 8" or 12". The contract is categorized under NAICS code 326121 and requires the delivery of the full quantity of crossarms and their corresponding mounting assemblies.
Unlaminated Plastics Profile Shape Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332912
Closed
SLED
Supply of Institutional Faucets (Washerless, 1.5 GPM)
Health and Human Services Commission

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332912
Closed
SLED
Supply of Thermostatic Mixing Valves
Health and Human Services Commission

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332912
Closed
SLED
Sloan Urinal Flushing Device Kit Supply
Forty Niners Stadium Management Company LLC

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332912
Closed
SLED
Sloan Toilet Flushing Device Kit Supply
Forty Niners Stadium Management Company LLC

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332912
Closed
SLED
Lavatory Faucet Kit Supply and Delivery
Forty Niners Stadium Management Company LLC

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332912
Closed
SLED
Wellhead Assembly Supply and Installation
County of Sacramento, Department of Waste Management and Recycling

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332912
Closed
SLED
Gate Valve and Control Valve Supply
F0138 - Purchasing

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 332912
Closed
SLED
Water Meter Supply (4-Inch Potable Water Meter)
MODOT NORTHEAST DISTRICT

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 332912
Closed
SLED
VALVE SUB ASSEMBLY MODULATOR ABS CS RS - ref 2099219
Solicitation # 2099219
Dallas Area Rapid Transit

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 332912
Closed
SLED
Central Hydraulic System Kits
Solicitation # 601440000053396
Texas Department Of Transportation

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 332912
Closed
SLED
IFB 11046-0-2026/MD, Valve Detector Check Stock Items
Solicitation # IFB-122337
City of Norfolk

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 332912
Closed
SLED
Hydrant and Hydrant Component Supply
City Of Iowa City

POSTED

5 months ago

CLOSED

4 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS