Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Combined Synopsis/Solicitation opportunity from General Services Administration was posted on April 11, 2016. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Flagging Ribbon

Closed
7QSBAAC-W2-16-0928-SQ-2Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326113
New
DIBBS
QPL Acrylic Plastic Sheet SupplierThis subcontract involves the manufacture and supply of 16 colorless, transparent, plain acrylic plastic sheets measuring 0.150 by 36 by 48 inches. The materials must strictly conform to NSN 9330-00-291-5952 and MIL-PRF-5425E standards. To be eligible for the award, the supplier must hold QPL approved manufacturer status and ensure all products adhere to MIL-STD-129 marking and RP001 palletization requirements. The contract is managed under NAICS code 326113 for the Department of Defense. The selected supplier is responsible for delivering the sheets FOB Origin to the DLA Distribution DDSP located in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 9, 2026.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

in 11 days
NAICS: 326113
New
DIBBS
Supply of Plastic Sheets (NSN 9330-00-202-1901)This subcontract involves the supply of 28 specialized plastic sheets, identified by NSN 9330002021901, to support prime contractors delivering on DLA Troop Support contracts. The materials are to be delivered to Tinker AFB by April 1, 2027, under FOB Destination Other terms. The agreement is managed under the Department of Defense through Construction and Equipment MRO SVC I. To be eligible, providers must complete all required RFQ representations and certifications and maintain strict compliance with DoD regulations concerning covered defense telecommunications.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

in 11 days
NAICS: 326113
New
DIBBS
Supply of Sealed Air Corp Ethafom Plastic SheetsThis subcontract involves the procurement or manufacture of 137 specialized white plastic sheets, specifically Sealed Air Corp 8Y800 P/N ETHAFOAM220, measuring 48 by 48 by 1.00 inches. These materials are intended for prime contractors fulfilling Department of Defense supply contracts and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor is required to ensure all materials are packaged and marked in accordance with MIL-STD-129 and RP001 standards. Additionally, the agreement mandates strict adherence to the Buy American and Balance of Payments Program requirements. The project falls under NAICS code 326113 and is managed through the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 11 days
NAICS: 326113
New
DIBBS
Supply of High-Performance Plastic Vacuum Film/SheetThis subcontract involves the supply of high-performance plastic vacuum film for prime contractors supporting Department of Defense supply contracts through the agency in Warner Robins. The requirement is for 10 rolls of specialized plastic sheeting, identified by NSN 9330003943554, with each roll measuring 1,000 feet. The material must be free of pinholes and equivalent to either Aerovac P/N VAC-PAK HS 8171 or Airtech International P/N Wrightlon 7400. Performance will take place at Robins Air Force Base. Interested parties must be registered via the DLA Account Management and Provisioning System to participate. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, falling under NAICS code 326113.
WARNER ROBINS

POSTED

about 16 hours ago

DEADLINE

in 11 days
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-27-T-0369
OKC CP

POSTED

about 16 hours ago

DEADLINE

in 11 days
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-27-T-0315
Solicitation SPE8E5-27-T-0315 is a procurement request by the Defense Logistics Agency for 10 rolls of plastic sheet, identified by NSN 9330003943554, where each roll equals 1,000 feet. Acceptable materials include Aerovac LLC P/N VAC-PAK HS 8171 FILM or Airtech International Inc P/N WRIGHTLON 7400. A critical quality requirement for this material is that pinholes are strictly unacceptable. The delivery is set for 167 days after order, with an original required delivery date of March 7, 2027, and a need ship date of April 26, 2027. The items are to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. While commercial packaging per ASTM D3951 is permitted for non-hazardous materials, the DLA Master List of Technical and Quality Requirements takes precedence. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The procurement is governed by various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. All quotes must be submitted through the DLA Internet Bid Board System.
WARNER ROBINS

POSTED

about 16 hours ago

DEADLINE

in 11 days
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E9-27-T-0288
Solicitation SPE8E9-27-T-0288 is a Request for Quotations issued by the DLA Troop Support Construction and Equipment MRO SVC I for the procurement of 16 sheets of colorless, transparent, plain acrylic plastic sheets. Each sheet must be 0.150 inches thick, 36 inches wide, and 48 inches long, conforming to NSN 9330-00-291-5952 and basic specification MIL-PRF-5425E. This is a Qualified Products List item, requiring the manufacturer to be QPL approved at the time of award. The required delivery date is March 4, 2027, with a delivery lead time of 167 days after order, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA Master List Technical and Quality Requirements, which take precedence over ASTM D3951 commercial packaging standards. All shipments must be marked and labeled per MIL-STD-129 and palletized according to RP001. Inspection and acceptance will occur at the destination. Key regulatory requirements include compliance with the Buy American Act, DFARS safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Quotes must be submitted via the DLA Internet Bid Board System by November 9, 2026, and invoicing is to be processed electronically through the Wide Area WorkFlow system.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

in 11 days
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-27-T-0366
Solicitation SPE8E5-27-T-0366 is a small business set-aside procurement by the Defense Logistics Agency for the supply of 137 white plastic sheets, specifically Sealed Air Corp 8Y800 P/N ETHAFOAM220 measuring 48 by 48 by 1.00 inches. The material is identified by NSN 9330011860354 and is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is March 30, 2027, with a delivery window of 167 days after the delivery order. Inspection and acceptance will take place at the destination. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and RP001, with specific requirements for hazardous materials under FED-STD-313 and TQ requirement IP025. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS). Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Key regulatory compliance includes the Buy American and Balance of Payments Program, NIST SP 800-171 cybersecurity assessment requirements, and various DFARS clauses regarding the prohibition of covered defense telecommunications equipment.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 11 days
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-27-T-0325
Solicitation SPE8E5-27-T-0325 is a small business set-aside for the procurement of 16 plastic sheets, identified by NSN 9330-01-313-9713. Each sheet must measure 48 inches long by 48 inches wide with a thickness of .500 inches. The items are to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia within 167 days after order. The procurement is governed by TDP Rev A Gen 1 and ASTM-D3294 Revision D, with inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Bare items must be marked every three feet with the specification number, revision letter, type, and class, following the legibility and color standards of MIL-STD-190. Non-hazardous materials should be packaged per ASTM D3951, while hazardous materials require compliance with FED-STD-313 and TQ requirement IP025, including the submission of a Safety Data Sheet prior to award. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. The solicitation provides a price evaluation preference for certified HUBZone small business concerns and explicitly prohibits the use of additive manufacturing for the supplied items. Key regulatory compliance includes the Buy American Act, Berry Amendment, and various DFARS cybersecurity and telecommunications restrictions.
WARNER ROBINS

POSTED

about 16 hours ago

DEADLINE

in 11 days
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E9-27-T-0287
Solicitation SPE8E9-27-T-0287 is a request for the procurement of 28 sheets of colorless, transparent acrylic plastic sheet, identified by NSN 9330002021901. The material must be 0.060 inches thick, 36 inches wide, and 48 inches long, conforming to MIL-P-5425 Finish A and basic specification MIL-PRF-5425E. This is a critical application item requiring a manufacturer approved on the Qualified Products List (QPL) at the time of award. The contract specifies a need ship date of March 1, 2027, with a required delivery date of April 1, 2027, delivered FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The procurement includes strict quality and safety mandates, including the prohibition of intentionally added mercury and compliance with MIL-STD-130N for identification marking. Packaging and palletization must adhere to MIL-STD-2073-1E and DLA requirement RP001, with hazardous materials governed by IP025. Inspection and acceptance will occur at the destination, though source inspection is also required. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and adherence to the Buy American Act and DFARS cybersecurity standards for safeguarding covered defense information. Award evaluation may include a price preference for HUBZone concerns.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

in 11 days
NAICS: 326113
New
DIBBS
MIL-SPEC Waterproof/Greaseproof Packaging SuppliesThis subcontract opportunity is issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of high-barrier packaging materials. The requirement is for medium-duty, waterproof, and greaseproof opaque bags designed to protect components from ultraviolet rays and environmental degradation. All supplied materials must strictly adhere to MIL-DTL-117, Type II, Class C, Style 1 specifications, and the provider must deliver certification of material compliance for 22 units. The contract is designated as a Total Small Business Set-Aside under NAICS code 326113. Interested parties must submit their responses by November 12, 2026. This effort supports prime contractors in ensuring the long-term preservation of critical weapons support components through specialized packaging solutions.
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
NAICS: 326113
New
DIBBS
Supply of Stackable Transit Cases with Air ValvesThis HUBZone set-aside subcontract, issued by Construction and Equipment Containers for the Department of Defense, requires the delivery of 68 stackable transit cases with integrated air valves. The cases must meet NSN 8145-01-563-8624 specifications and strictly adhere to RP001 DLA Packaging Requirements, ASTM D3951, and MIL-STD-129 marking standards. Performance will take place in Tracy, California, under NAICS code 326113. To be eligible, contractors must ensure full compliance with the Buy American Act and maintain cybersecurity standards as outlined in NIST SP 800-171. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 11 days

General Info

Agency

General Services Administration → Gsa/fas Region 7 Acqusition Center

NAICS

326113 - Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

Place of Performance

Throughout CONUS., TX, USA

Set-Aside

NONE

Documents

1

RFQ_7QSBAAC-W2-16-0928-SQ-2.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Response Deadline

Deadline has passed

Posted

Combined Synopsis

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGeneral Services Administration → Gsa/fas Region 7 Acqusition Center
Contacts1 person available
OfficeFORT WORTH, TX, 76102, USA
Organization / AgencyGeneral Services Administration → Gsa/fas Region 7 Acqusition Center
Office AddressFORT WORTH, TX, 76102, USA
Contacts
Joshua Walker
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
This Request for Quotation (RFQ) is for a Standing Quote Agreement (SQA) for National Stock Numbers (NSNs) 9905-00-684-0928, 9905-00-684-4646, 9905-01-458-1192, 9905-01-458-2057, and 9905-01-458-2058 which are all Flagging Ribbon. Please see the RFQ for the complete requirements. Vendors responding to this posting must meet the conditions, specifications and requirements outlined in the RFQ. Please read the attached RFQ thoroughly, and complete it in its entirety before submitting it back via e-mail to contact@example.gov before the stated closing dated and time. Please note evaluation factor as lowest price technically acceptability (see evaluation criteria in RFQ). FOB Destination. Award will be made in the aggregate for all items (M-FSS-301-D). Item No. 1. 9905-00-684-0928 - Flagging Ribbon Item No. 2. 9905-00-684-4646 - Flagging Ribbon Item No. 3. 9905-01-458-1192 - Flagging Ribbon Item No. 4. 9905-01-458-2057 - Flagging Ribbon Item No. 5. 9905-01-458-2058 - Flagging Ribbon

More opportunities from General Services Administration → Gsa/fas Region 7 Acqusition Center

Same awarding agency

NAICS: 541330
Federal
Quality Assurance and Acceptance Testing CoordinationThis contract focuses on ensuring that HVAC units comply with merchantability and fitness-for-purpose standards, emphasizing quality assurance throughout the procurement process. The contractor is responsible for supporting government inspections as well as managing the resolution of any defects discovered after acceptance of the units. This helps guarantee that the delivered HVAC systems meet the required operational and quality benchmarks. The subcontract, titled "Quality Assurance and Acceptance Testing Coordination," is issued by the General Services Administration's GSA/FAS Region 7 Acquisition Center. The performance location is San Diego, specifically within the 92135 postal zone. The contract falls under NAICS code 541330, which pertains to engineering services. While specific points of contact and detailed organizational information are not provided, the contract requires a focus on coordinating acceptance testing and ensuring compliance with quality standards in support of federal procurement objectives.
Engineering Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 484220
Federal
Transportation and Final Mile Delivery (FOB Destination, CONUS)This contract involves the transportation and final mile delivery of air conditioning units to Naval Air Station North Island, California, under a FOB destination arrangement within the continental United States. The responsibility and risk of loss for the goods transfer to the buyer upon delivery at the specified destination. The procurement is managed by the General Services Administration's Region 7 Acquisition Center, aligning with the NAICS code 484220, which pertains to specialized freight trucking. The scope covers safe and timely delivery of the freight to the designated location in San Diego, CA, ensuring compliance with all relevant regulations and requirements. While specific solicitation details such as a number or set-aside information are not provided, the contract is positioned as a subcontract opportunity aimed at supporting government logistics needs within CONUS, emphasizing the critical role of reliable final mile delivery services for government installations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 561499
Federal
Packaging, Marking, and Labeling Services (MIL-STD-129R Compliance)This contract involves providing packaging, marking, and labeling services for HVAC units in compliance with military standards, specifically MIL-STD-129R. The work includes preparing military-compliant packaging, applying the appropriate labeling and markings, and ensuring the inclusion of CAGE codes and UID tagging as required by the standard. The services are intended to meet stringent military specifications to ensure proper handling, identification, and traceability of the HVAC equipment. Issued as a subcontract under the NAICS code 561499, which covers specialized services related to packaging and labeling, the contract is managed by the General Services Administration (GSA) through the Region 7 Acquisition Center. The place of performance is designated to be in San Diego, California, with the postal code 92135. This contract emphasizes adherence to military logistics and identification protocols to support the secure and efficient transportation and tracking of HVAC units.
All Other Business Support Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 333415
Federal
Commercial Air Conditioning Unit Supply (Amana TPAC Units)The contract involves the supply of Amana-branded through-the-wall air conditioning units, specifically the TPAC models, to a military installation located in San Diego. The scope covers the complete procurement process, including testing, packaging, and providing all necessary documentation to ensure proper delivery and installation. This subcontract falls under NAICS code 333415, which pertains to air conditioning and warm air heating equipment manufacturing. Administered by the General Services Administration’s Region 7 Acquisition Center, the contract aims to fulfill the military’s operational requirements for reliable and efficient cooling solutions. The focus on thorough testing and correct packaging highlights the importance of quality assurance and readiness to meet the demands of the installation environment. The contract was posted in early May 2026, indicating a forthcoming or ongoing acquisition to maintain climate control infrastructure at the designated location.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Domestic Supply Chain Compliance & CertificationThis contract involves providing advisory and verification services to ensure that products and components comply with the Buy American Act, the Federal Acquisition Supply Chain Security Act (FASCSA), and federal restrictions related to supply chain vulnerabilities caused by foreign adversary-controlled elements. The focus is on certifying that supply chains are free from components subject to such restrictions, helping government agencies maintain compliance with federal regulations designed to protect national security interests and promote domestic sourcing. The contract is a subcontract categorized as a Total Small Business Set-Aside under FAR 19.5, specifically aligned with NAICS code 541611, which covers administrative management and general management consulting services. It is issued by the General Services Administration's Federal Acquisition Service, Region 7 Acquisition Center. The place of performance corresponds to a location with zip code 99301. This contract represents an opportunity for small businesses specializing in compliance consulting, risk assessment, and supply chain verification to assist federal clients in aligning with evolving regulatory frameworks addressing domestic sourcing and foreign adversary concerns.
Administrative Management and General Management Consulting Services

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 561910
Federal
Packaging, Marking, and Barcoding ServicesThis contract involves providing specialized packaging, labeling, and 2D PDF417 barcode application services for currency counting machines, ensuring compliance with MIL-STD-129R and ASTM D3951 standards. The services include applying the necessary data fields on the packaging to meet military and industry barcode specifications. It is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, targeting qualified small businesses. Administered by the General Services Administration’s Region 7 Acquisition Center, the contract falls under NAICS code 561910, which pertains to packaging and labeling services. The work is to be performed within the designated area corresponding to the ZIP code 99301. This contract opportunity aims to support federal procurement goals while ensuring standardized and traceable packaging for specialized machinery.
Packaging and Labeling Services

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 333318
Federal
Supply of Currency Counting Machines (NSN 7490015997186)This contract involves the supply and delivery of commercial off-the-shelf currency counting machines identified by NSN 7490015997186. The machines must comply with federal packaging, marking, and compliance standards, ensuring they meet government quality and regulatory requirements. The procurement is conducted as a subcontract under a Total Small Business Set-Aside, in accordance with FAR 19.5, encouraging participation from small businesses. The contract is managed by the General Services Administration's Region 7 Acquisition Center, operating under NAICS code 333318, which pertains to commercial and service industry machinery manufacturing. The place of performance is associated with the ZIP code 99301, and the contract was posted on February 10, 2026. This opportunity supports small business engagement while providing essential currency counting equipment to federal agencies.
Other Commercial and Service Industry Machinery Manufacturing

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Small Business Subcontracting Plan Development & ComplianceThis contract involves the development and implementation of a subcontracting plan that complies with the Federal Acquisition Regulation (FAR) requirements, specifically addressing small business participation goals as mandated by clause 52.219-9. The work is classified under the NAICS code 541611 and is set aside entirely for small businesses under the Total Small Business Set-Aside provision outlined in FAR 19.5. The contract is managed by the General Services Administration’s Region 7 Acquisition Center, with the place of performance located in Seal Beach, California, ZIP code 90740. The primary objective is to ensure adherence to all FAR compliance standards while promoting the inclusion of small businesses in subcontracting opportunities. This includes establishing measurable goals for small business participation and maintaining accountability throughout the contract lifecycle. The emphasis on small business involvement reflects the federal government’s commitment to supporting small enterprises through structured subcontracting plans aligned with regulatory requirements.
Administrative Management and General Management Consulting Services

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 484220
Federal
Transportation and Delivery to Seal Beach, CAThis contract involves the final delivery of 40 stainless steel container assemblies to Seal Beach, CA 90740. The scope includes not only the transportation of these heavy industrial cargo items but also the coordination of all logistics required to ensure their safe and timely arrival. The contract is a subcontract classified under NAICS code 484220, which pertains to specialized freight trucking, indicating that the transportation and handling of large or heavy industrial goods is a critical component of the work. The contract is a Total Small Business Set-Aside under FAR 19.5, reflecting an effort to support small businesses. It is managed by the General Services Administration’s Region 7 Acquisition Center, though specific contact details and the solicitation number are not provided. The place of performance is specifically the city of Seal Beach with the zip code 90740, confirming the delivery location. This arrangement demonstrates the government’s reliance on specialized subcontractors to handle complex logistics and transportation needs for critical industrial equipment.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 811411
Federal
Labeling and Marking ServicesThis contract involves providing labeling and marking services in accordance with federal standards FED-STD-123H or MIL-STD-129R, which includes applying durable barcode labels for shipment tracking of container assemblies. The work is designated as a total small business set-aside under the SBA guidelines (FAR 19.5), ensuring opportunities for small businesses to compete. The contract falls under NAICS code 811411, related to commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance. The solicitation is managed by the General Services Administration's Region 7 Acquisition Center, with the place of performance specified as Seal Beach, California, ZIP code 90740. Although some organizational and point of contact details are not provided, the contract requires subcontracting for a service critical to logistics and inventory management, emphasizing compliance with military and federal standards for labeling and shipment tracking.
Home and Garden Equipment Repair and Maintenance

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 561910
Federal
Packaging and Protective CratingThe contract involves providing protective packaging for 40 stainless steel containers to ensure their safety during shipment, handling, and storage, meeting the standards set by ASTM D3951. It is designated as a subcontract under a total small business set-aside in accordance with FAR 19.5, targeting businesses within that category. The contract falls under the NAICS code 561910, which pertains to support services. This agreement is issued by the General Services Administration (GSA) through the GSA/FAS Region 7 Acquisition Center. The work is to be performed in Seal Beach, California, with the specified ZIP code 90740. The contract was posted on January 27, 2026, and focuses on packaging and protective crating services, emphasizing compliance with quality and industry standards to prevent any damage to the stainless steel containers throughout the logistics process.
Packaging and Labeling Services

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 332311
Federal
Stainless Steel Container ManufacturingThis contract involves the fabrication of 40 stainless steel container assemblies designed with double-door access, lockable wheels, and internal shelving, strictly adhering to the specifications outlined by the National Stock Number 8115-01-377-8817. The contract is a subcontract awarded under a Total Small Business Set-Aside in accordance with FAR 19.5, indicating that only qualified small businesses could compete for this opportunity. The associated NAICS code is 332311, which pertains to fabricated structural metal manufacturing. The contracting agency responsible is the General Services Administration (GSA) through its FAS Region 7 Acquisition Center. The place of performance is designated as Seal Beach, with the ZIP code 90740. Though specific office contact details are not provided, the contract posting date is January 27, 2026, and further contract details are available through the provided URL on the SAM.gov platform. This contract emphasizes high-quality stainless steel manufacturing compliant with government standards, tailored for logistical or storage purposes requiring mobility and secure access.
Prefabricated Metal Building and Component Manufacturing

POSTED

9 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 326113
Awarded
Federal
GLENNALLEN GEOTERRA PADLOC 2106
Solicitation # L16PS00397
Alaska State Office

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 326113
Awarded
Federal
93--PLASTIC SHEET
Solicitation # SPE8E516T2199

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 326113
Awarded
Federal
93--PLASTIC SHEET
Solicitation # SPE8E516T0945

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 326113
Awarded
Federal
93--PLASTIC SHEET
Solicitation # SPE7M216Q0082

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 326113
Awarded
Federal
PERFORATED DOUBLE ALUMINIZED PET FILM AND POLYESTER B4A NETTING
Solicitation # NNJ16576925Q

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 326113
Awarded
Federal
93--PLASTIC SHEET
Solicitation # SPE8E516T1612

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 326113
Awarded
Federal
93--PLASTIC SHEET
Solicitation # SPE7M215T4906

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 326113
Awarded
Federal
93--PLASTIC SHEET
Solicitation # SPE7M215T4345

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 326113
Awarded
Federal
DAYBOARD FILM
Solicitation # HSCG25-16-Q-3L3A16
LOUIS(00025)

POSTED

almost 11 years ago

CLOSED

almost 11 years ago
View Details
NAICS: 326113
Awarded
Federal
93--PLASTIC SHEET
Solicitation # SPE8E516Q0111

POSTED

almost 11 years ago

CLOSED

almost 11 years ago
View Details
NAICS: 326113
Awarded
Federal
Acrylic Tank
Solicitation # N6893616T0059
Naval Air Warfare Center

POSTED

almost 11 years ago

CLOSED

almost 11 years ago
View Details
NAICS: 326113
Awarded
Federal
93--PLASTIC SHEET
Solicitation # SPE4A516T7337

POSTED

almost 11 years ago

CLOSED

almost 11 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS