Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Flap Assembly Component Machining

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332710
New
SBIR / STTR
Optomechanical Packaging Fabrication
U.S. Air Force

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 332710
New
SBIR / STTR
Rapid Prototyping & Specialized Housing Fabrication
U.S. Navy

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 332710
New
SBIR / STTR
Advanced Power Source Prototype Fabrication
U.S. Air Force

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 332710
New
SBIR / STTR
Experimental Prototype Component Fabrication
U.S. Air Force

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 332710
New
Federal
NRP,HANDSET ASSEMBL
Solicitation # SPRPA127QYA05
Solicitation SPRPA1-27-Q-YA05 is a fixed-price request for a new spares requirement for one Handset Assembly, identified by NSN 4920-01-607-6892. Issued by DLA Aviation at Philadelphia under Emergency Acquisition Flexibilities, the procurement requires delivery within 90 days, with inspection and acceptance occurring at the origin. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Offerors quoting as distributors must provide an unredacted OEM Distributor Letter at the time of proposal submission to be considered responsive. The contract mandates strict adherence to quality and packaging standards, including ISO 9001 requirements and MIL-STD-2073 for preservation. Specific packaging levels are defined for CONUS and OCONUS shipments, with additional requirements for electrostatic discharge sensitive items and hazardous materials, including the submission of Safety Data Sheets. Payment and receiving reports must be processed through the Wide Area Workflow system. Key regulatory compliance includes the Buy American program, NIST SP 800-171 cybersecurity standards, and DFARS clauses regarding Critical Safety Items and Contractor Business Systems.
Pa DLA Aviation At Philadelphia

POSTED

about 3 hours ago

DEADLINE

in about 1 month
NAICS: 332710
New
DIBBS
Supply of Metal Tube Assemblies (Caterpillar PN 571-4029)This subcontract involves the manufacture or procurement of two finished metal tube assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must adhere to NSN 4710-01-721-6019 and Caterpillar part number 571-4029, with performance taking place in New Cumberland. The contractor is responsible for ensuring all items are packaged and marked according to ASTM D3951 and MIL-STD-129 standards. Additionally, the provider must maintain full compliance with the Buy American Act and the DLA Master List of Technical and Quality Requirements.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Supply of Tube Couplings (NSN 4730-01-274-4549)This subcontract involves the supply of 40 precision-manufactured tube couplings, specifically NSN 4730-01-274-4549, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing these parts in accordance with the DLA Master List of Technical and Quality Requirements RA001. All materials must adhere to the Buy American Act, and the final products must be packaged and palletized according to ASTM D3951, MIL-STD-129, and RP001 standards. The project is designated as a Total Small Business Set-Aside under NAICS code 332710 and is managed by the Department of Defense. Delivery of the units is required FOB Origin, with the place of performance located in Benson. Interested parties must respond by November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Manufacturing of Rigid Connecting Links (NSN 5340017008484)This subcontract involves the manufacture and supply of two precision rigid connecting links for the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating the parts according to Part Number 1700141172 using CNC milling and turning processes to ensure all critical application tolerances are met. All work must adhere to DLA Master List quality standards and strictly prohibit the use of Class I ozone-depleting chemicals. The project requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for all packaging and marking requirements. Performance will take place in Fort Lee, Virginia, under NAICS code 332710. The response deadline for this requirement is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Manufacture of Sleeve Bushings (NAS537B5P024)This subcontract involves the manufacture of 64 precision sleeve bushings, part number NAS537B5P024, for the DLA Weapons Support ASC Commodities Division. The project requires the use of traditional machining processes, as additive manufacturing is strictly prohibited. All materials used in production must adhere to the Buy American Act and the Berry Amendment to ensure domestic compliance. The selected contractor must hold ISO 9001:2015 and SAE AS9003 certifications to ensure quality standards are met. The final deliverable consists of 64 finished and inspected units to be performed at Tinker AFB. The response deadline for this requirement is November 4, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
NAICS: 332710
New
DIBBS
Precision Machining of Aircraft Bracket AssembliesThis subcontract involves the precision machining of ten aluminum aircraft bracket assemblies for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The scope of work requires high-precision CNC milling, turning, and drilling in strict accordance with Reference Drawing Nos 78286 70009-02001 and 81996 70652-06260-041. Performance of the contract will take place in Corpus Christi, Texas. To be eligible, contractors must possess specific security and quality certifications, including US/Canada Joint Certification Program certification, CMMC Level 2, and NIST SP 800-171 compliance. The opportunity was posted on October 27, 2026, with a response deadline of November 4, 2026, falling under NAICS code 332710.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

in 7 days
NAICS: 332710
New
DIBBS
Precision Fabrication of Battery Box CoversThis subcontract involves the precision fabrication of battery box covers for prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate. The manufacturer must produce parts according to Basic Drawing NR 19207 12719703 and TDP Rev A Gen 1, utilizing precision machining or forming techniques. Additive manufacturing is strictly prohibited for this project, and all finished covers must meet the specifications for NSN 6160011870024. Quality assurance is a critical component of the contract, requiring inspections performed in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contractor must maintain CMMC Level 2 certification and ensure full compliance with NAVSEA 5100-003D. The solicitation is categorized under NAICS code 332710, with a response deadline of November 12, 2026.
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 22 hours ago

DEADLINE

in 15 days
NAICS: 332710
New
DIBBS
Manufacture of Retainer Handles (NSN 8140-01-018-3845)This subcontract involves the manufacture of three finished and inspected retainer handles under NSN 8140-01-018-3845 for the Department of Defense, specifically the DLA Weapons Support ASC. The components must be produced using traditional machining processes, as additive manufacturing is strictly prohibited. Performance will take place in New Cumberland, Pennsylvania, with a response deadline of November 4, 2026. To qualify, contractors must maintain SAE AS9003 or ISO 9001 quality systems and utilize MIL-STD-1916 or ASQ H1331 zero-based sampling plans. Additionally, the provider must hold US/Canada Joint Certification Program certification to handle ITAR and EAR regulated data. The project falls under NAICS code 332710.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The contract requires the precise fabrication of left, right, and trailing edge flaps to meet stringent dimensional tolerances, surface finish standards, and integration readiness criteria for flight control systems. The work involves advanced machining and assembly processes to ensure seamless compatibility with aircraft control architectures, demanding a high level of quality control and technical expertise in aerospace component manufacturing. All deliverables must be fully verified for structural integrity, aerodynamic performance, and flight-system interoperability prior to handover. The solicitation is issued as a subcontract under NAICS code 332710, with a posted date of August 3, 2026, and a response deadline of August 13, 2026. The contracting activity is managed by the Naval Air Warfare Center under the Department of Defense, with no specified set-aside or location restrictions. While the place of performance and point of contact details are not provided, interested parties must submit proposals through the designated SAM.gov portal before the deadline to be considered for award.

General Info

Fabricate flight control flaps to aerospace standards for DoD, submit proposals via SAM.gov by August 13, 2026.

Agency

Department Of Defense → Naval Air Warfare Center

NAICS

332710 - Machine Shops

Place of Performance

CA

Set-Aside

NONE

Documents

This scope was carved out of N6893626Q5163.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Custom Parts Fabrication/Machining

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Air Warfare Center
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → Naval Air Warfare Center
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Fabrication of left, right, and trailing edge flaps requiring precise fit-up, surface finish, and integration readiness for flight control systems.

More opportunities from Department Of Defense → Naval Air Warfare Center

Same awarding agency

NAICS: 423610
New
Federal
Supply of Daughterboard Bit SynchronizersThis subcontract with the Naval Air Warfare Center involves the procurement and delivery of two LS-40-DB20 high-speed daughterboard bit synchronizers. These components are intended for prime contractors working on Weapons Division projects and must adhere to strict military and international standards, specifically MIL-STD-130, MIL-STD-129, and ISO/IEC 16022 for 2D data matrix symbology. To be eligible for this contract, the provider must hold an authorized Lumistar distributorship and maintain compliance with DFARS 252.204-7012 regulations. The opportunity was posted on October 27, 2026, with a response deadline of November 5, 2026, falling under NAICS code 423610.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423610
New
Federal
Supply of PCI Multi-function PCM Decom CardsThis subcontract involves the procurement and delivery of two units of specialized second-generation PCI Multi-function PCM Decom hardware, specifically the LS-50-D model, for prime contractors working on Naval Air Warfare Center Weapons Division projects. The hardware must be delivered in strict accordance with MIL-STD-130 and MIL-STD-129 standards, utilizing 2D data matrix symbology as defined by ISO/IEC 16022 and ANSI MH 10.8.2. To be eligible for this contract, the provider must maintain an authorized Lumistar distributorship and ensure full compliance with DFARS 252.204-7012 regulations. The opportunity is categorized under NAICS code 423610 and is managed under the Department of Defense for the Naval Air Warfare Center.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334418
New
Federal
Lumistar Decom Cards
Solicitation # N6893627Q0015
The Naval Air Warfare Center Weapons Division at China Lake, California, is seeking quotes for a firm fixed price contract to procure Lumistar Decom Cards. The requirement consists of two PCI Multi-function PCM Decom units (MPN LS-50-D) and two Daughterboard Bit Synchronizers (MPN LS-40-DB20). This procurement is conducted on an other than full and open competition basis, designated as a manufacturer sole source to Lumistar but open to competition among authorized distributors. All deliverables are requested by February 28, 2027, with inspection and acceptance occurring at the destination. Interested vendors must maintain an active registration in the System for Award Management and utilize Wide Area WorkFlow for all invoicing and payment requests. Because the requirement may involve Controlled Unclassified Information or Export Controlled Information, contractors must be certified through Defense Logistics Information Services and have an approved DD 2345. Award will be granted to the responsible offeror whose proposal is determined to be most advantageous to the government, considering both price and other evaluated factors. Compliance with MIL-STD-130 and MIL-STD-129 for marking and packaging is mandatory.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 236118
New
Federal
RTOIL Office rehab
Solicitation # N6893627Q0001
The Naval Air Warfare Center is soliciting quotes for the PM36 RTOIL Office Rehab project located at Naval Base Ventura County Point Mugu. This firm-fixed-price contract is a 100 percent small business set-aside with an estimated project magnitude between 250,000 and 500,000 dollars. The scope of work includes the demolition of approximately 2,455 square feet of carpet, 974 square feet of vinyl flooring, and 1,150 linear feet of base board, as well as the removal of all window blinds. Improvements involve installing 53 dimmable LED troffer light fixtures with associated switches, patching and painting 9,000 square feet of walls in light French Grey, painting 20 door frames, installing cushioned back carpet tiles and vinyl plank flooring, and mounting 16 new whiteboards. The performance period is 120 calendar days, with work beginning within 14 days of the Notice to Proceed. The closing date for quotes has been extended to October 30, 2026, at 4 PM PDT. Award will be granted to the responsible offeror determined to be most advantageous based on price, delivery schedule, technical compliance, and Supplier Performance Risk System assessments. Offerors must provide sufficient technical information to demonstrate project understanding to be considered. Key requirements include the submission of a Quality Control Plan managed by a NAVFAC Contractor Quality Management certified manager, adherence to Davis-Bacon prevailing wage rates for Ventura County, and the provision of required payment bonds. Invoicing will be processed via Wide Area WorkFlow with net 30 payment terms.
Residential Remodelers

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 333248
New
Federal
Prometheus Atomic Layer Deposition System
Solicitation # N6893626SIMACQD550000E5500000441
The Naval Air Warfare Center, Weapons Division, China Lake, intends to award a firm fixed price contract on a sole source basis to Forge Nano Inc. for a Prometheus Atomic Layer Deposition System. This decision is based on the company being the sole manufacturer of fluidization ALD systems and the owner of the exclusive, proprietary software required to operate and support the equipment. While this is a notice of intent and not a request for quotes, interested parties may submit a capability statement referencing solicitation number N6893626SIMACQD550000E5500000441 to Amy Lamberth by 4:00pm PST on November 2, 2026. All participating vendors must maintain an active registration in SAM.gov and obtain certification through Defense Logistics Information Services to access Controlled Unclassified Information or Export Controlled Information.
All Other Industrial Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 541340
Federal
KeysightCare Software and Warranty AdministrationThe KeysightCare Software and Warranty Administration subcontract supports prime contractors working on projects for the Naval Air Warfare Center, Weapons Division. The scope of work involves managing 12 months of node-locked KeysightCare software subscriptions and administering one-year Return to Keysight warranties. Additionally, the contractor is responsible for implementing KeysightCare Enhanced upgrades to ensure improved repair turnaround times and technical support, with a final requirement to deliver all active subscriptions and warranty certificates. This opportunity is categorized under NAICS code 541340 and is issued by the Department of Defense. Interested parties must be authorized to provide KeysightCare services to be eligible. The response deadline for this requirement is October 28, 2026.
Drafting Services

POSTED

7 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 561910
Federal
MIL-STD-130/129 Identification and Marking ServicesThis subcontract for MIL-STD-130/129 Identification and Marking Services involves providing specialized military marking and labeling for prime contractors supporting the Naval Air Warfare Center, Weapons Division. The scope of work focuses on the application of Department of Defense unique identification in accordance with DFARS 252.211-7003 and MIL-STD-130, utilizing two-dimensional data matrix symbology. Additionally, the contractor is responsible for labeling shipments according to MIL-STD-129 standards. To ensure quality and compliance, the contractor must use automatic identification technology devices to verify that all markings are machine-readable. The final deliverables include verified UID markings and shipping labels that meet all specified military requirements. This opportunity falls under NAICS code 561910 and is associated with the Department of Defense.
Packaging and Labeling Services

POSTED

7 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 423430
Federal
Authorized Supplier of Keysight UXA Signal AnalyzerThis subcontract opportunity is for the procurement of one Keysight UXA Signal Analyzer, part number N9042B, to support prime contractors on projects for the Naval Air Warfare Center, Weapons Division. The required unit must be configured with a frequency range of 2 Hz to 75 GHz, a 50 GHz preamplifier, 2 GHz analysis bandwidth, and an M.2 NVMe SSD running Windows 11 IOT LTSC. Additionally, the analyzer must include node-locked perpetual licenses for real-time, pulse, and vector analysis. Eligible bidders must be Authorized Keysight Distributors and are responsible for delivering the fully configured equipment to Point Mugu, California. The solicitation was posted on October 21, 2026, with a response deadline of October 28, 2026. This requirement falls under NAICS code 423430 and is managed by the Department of Defense.
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

7 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 334515
Federal
Keysight UXA Signal Analyzer
Solicitation # N6893627Q0010
The Naval Air Warfare Center, Weapons Division, intends to procure one Keysight UXA Signal Analyzer (P/N: N9042B) under solicitation N6893627Q0010. This is a firm fixed price requirement being pursued on an other than full and open competition basis, as a manufacture sole source to Keysight Technologies Inc., though it remains open to authorized distributors. The equipment must include specific technical components such as a Windows 11 IOT LTSC operating system, a 1.0 mm male RF input connector with a low noise amplifier, and various software and hardware options including a 50 GHz preamplifier and a 2 GHz analysis bandwidth. The package also requires a one-year return to Keysight warranty and 12 months of node-locked KeysightCare software support. Delivery is estimated by April 26, 2027, with the destination for inspection and acceptance located at the Naval Air Warfare Center Weapons Division in Point Mugu, California. The contractor is required to adhere to strict item identification and marking standards per MIL-STD-130 and MIL-STD-129, including the use of two-dimensional data matrix symbology for items with a unit acquisition cost of 5,000 dollars or more. All interested vendors must maintain an active registration in the System for Award Management and, if accessing controlled unclassified information, must be certified through Defense Logistics Information Services. Invoicing and payment will be processed electronically via the Wide Area Workflow system.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

7 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 513210
Federal
GNAT Pro Enterprise for Ada Software LicensesThis subcontract involves the provision of proprietary GNAT Pro Enterprise for Ada software licenses to support prime contractors working on projects for the Naval Air Warfare Center, Weapons Division. The scope of work includes delivering active software license subscriptions and specific license keys for T5:ENT-ADA/X86WIN and T5:ENT-ADA/VX6X86WIN environments, supporting a total of five unique users. To be eligible for this contract, providers must hold DLIS certification and maintain status as an Authorized Distributor or OEM of ADA Core Technologies products. The opportunity is categorized under NAICS code 513210 and is managed by the Department of Defense.
Software Publishers

POSTED

8 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 513210
Federal
GNAT Renewal
Solicitation # N6893627Q0013
The Naval Air Warfare Center, Weapons Division, located in China Lake, California, is seeking a firm fixed price contract for a GNAT renewal under solicitation N6893627Q0013. This procurement is intended as a manufacturer sole source to ADA Core Technologies, Inc., though it remains open to authorized distributors. The requirement consists of software licenses for GNAT Pro Enterprise for Ada, specifically for developing Ada software for x86 Windows 32-bit native and x86 VxWorks 6.x 32-bit cross-hosted on x86 Windows. The subscription allows for a total of five unique users with a period of performance from May 22, 2026, to May 21, 2027. The award will be granted to the responsible offeror whose proposal is most advantageous to the government, considering price and other factors. All quotes must be submitted by October 28, 2026, to Amy Lamberth. Vendors must maintain an active registration in the System for Award Management and be certified through Defense Logistics Information Services to access controlled unclassified information. Invoicing and payment will be processed via Wide Area WorkFlow, with delivery and inspection occurring at destination in Point Mugu, California.
Software Publishers

POSTED

8 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 541611
Federal
Technical Reporting and Product Support AnalysisThis subcontract opportunity involves providing technical study analysis and reporting for prime contractors supporting Naval Air Warfare Center Weapons Division range instrumentation projects. The primary objective is the production of formal Technical Reports focused on Product Support in accordance with DI-MISC-80508B, specifically documenting critical findings regarding system performance and sustainment. The project requires specialized technical writing expertise tailored to Department of Defense reporting standards. Interested parties should note that the response deadline is November 16, 2026, and the work falls under NAICS code 541611 for administrative management and general management consulting services.
Administrative Management and General Management Consulting Services

POSTED

13 days ago

DEADLINE

in 19 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332710
Closed
Federal
Elevator and Spoiler Surface Component Machining
Naval Air Warfare Center

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 332710
Closed
Federal
Actuator Arm Precision Fabrication
Naval Air Warfare Center

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 332710
Closed
Federal
Precision CNC Machining of Aileron Components
Naval Air Warfare Center

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 332710
Closed
Federal
Precision Machining of Adjustable V-Block Die
DLA Maritime - Puget Sound

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 332710
Closed
Federal
Custom Parts Fabrication/Machining
Solicitation # N6893626Q5163
Naval Air Warfare Center

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 332710
Closed
DIBBS
Precision Cutting Tool Manufacturing
Defense Logistics Agency

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 332710
Closed
DIBBS
Precision Machining and Fabrication of Mounting Plate
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 332710
Closed
DIBBS
Precision Machined Pump Rotor Supply
MARITIME SUPPLY CHAIN

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 332710
Closed
DIBBS
Precision Machining of Shouldered Shaft (Nickel-Copper Alloy)
MARITIME SUPPLY CHAIN

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 332710
Closed
DIBBS
Precision Machining & CNC Job Shop Services
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 332710
DIBBS
Small Business Subcontracting for Component Manufacturing or Assembly
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 332710
Closed
DIBBS
Precision Machining of Jack-Support Shoe (Critical Application Item)
LAND SUPPLY CHAIN

POSTED

3 months ago

CLOSED

3 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS